提交 3c1c2d4f 编写于 作者: F FuChao

花括弧换行;ignore_format.yml以空行结束

上级 a33e89a7
......@@ -11,4 +11,4 @@ dir_path:
- components/net/lwip-2.0.2
- components/net/lwip-2.0.3
- components/net/lwip-2.1.2
- bsp/mm32f327x/Libraries
\ No newline at end of file
- bsp/mm32f327x/Libraries
......@@ -3,4 +3,4 @@
# If you need to exclude a file, add the path to the file in file_path.
dir_path:
- Libraries/VangoV85xx_standard_peripheral
\ No newline at end of file
- Libraries/VangoV85xx_standard_peripheral
......@@ -105,7 +105,8 @@ void UART4_IRQHandler(void)
}
#endif /* BSP_USING_UART4 */
static const struct V85xx_uart uarts[] = {
static const struct V85xx_uart uarts[] =
{
#ifdef BSP_USING_UART0
{
UART0, /* uart peripheral index */
......@@ -167,7 +168,8 @@ static rt_err_t V85xx_configure(struct rt_serial_device *serial, struct serial_c
UARTx = (UART_TypeDef *)uart->uart_periph;
UART_InitParaStruct.Baudrate = cfg->baud_rate;
switch (cfg->data_bits) {
switch (cfg->data_bits)
{
case DATA_BITS_9:
UART_InitParaStruct.WordLen = UART_WORDLEN_9B;
break;
......@@ -177,7 +179,8 @@ static rt_err_t V85xx_configure(struct rt_serial_device *serial, struct serial_c
break;
}
switch (cfg->parity) {
switch (cfg->parity)
{
case PARITY_ODD:
UART_InitParaStruct.Parity = UART_PARITY_ODD;
break;
......@@ -205,7 +208,8 @@ static rt_err_t V85xx_control(struct rt_serial_device *serial, int cmd, void *ar
uart = (struct V85xx_uart *)serial->parent.user_data;
UARTx = (UART_TypeDef *)uart->uart_periph;
switch (cmd) {
switch (cmd)
{
case RT_DEVICE_CTRL_CLR_INT:
/* disable rx irq */
NVIC_DisableIRQ(uart->irqn);
......@@ -263,14 +267,16 @@ static void uart_isr(struct rt_serial_device *serial)
RT_ASSERT(uart != RT_NULL);
if ((UART_GetINTStatus((UART_TypeDef *)uart->uart_periph, UART_INTSTS_RX) != RESET) &&
(UART_GetFlag((UART_TypeDef *)uart->uart_periph, UART_FLAG_RXPE) != RESET)) {
(UART_GetFlag((UART_TypeDef *)uart->uart_periph, UART_FLAG_RXPE) != RESET))
{
rt_hw_serial_isr(serial, RT_SERIAL_EVENT_RX_IND);
/* Clear RXNE interrupt flag */
UART_ClearINTStatus(uart->uart_periph, UART_INTSTS_RX);
}
}
static const struct rt_uart_ops V85xx_uart_ops = {
static const struct rt_uart_ops V85xx_uart_ops =
{
V85xx_configure,
V85xx_control,
V85xx_putc,
......@@ -283,7 +289,8 @@ int V85xx_hw_usart_init(void)
int i;
for (i = 0; i < sizeof(uarts) / sizeof(uarts[0]); i++) {
for (i = 0; i < sizeof(uarts) / sizeof(uarts[0]); i++)
{
uarts[i].serial->ops = &V85xx_uart_ops;
uarts[i].serial->config = config;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册