Skip to content

R
rt-thread

混口饭吃， / rt-thread
与 Fork 源项目一致

Fork自 Mr_Pangza / rt-thread

通知 1
Star 0
Fork 0
R
rt-thread

体验新版 GitCode，发现更多精彩内容 >>

提交 dcff85f1 编写于 作者: qiuyiuestc's avatar qiuyiuestc
浏览文件
操作

modbus master 

git-svn-id: https://rt-thread.googlecode.com/svn/trunk@785 bbd45198-f89e-11dd-88c7-29a3b14d5316
上级 059f6d01
隐藏空白更改
内联 并排
Showing with 70 addition and 72 deletion
components/net/freemodbus/modbus/mbmaster.c
浏览文件 @ dcff85f1
......@@ -24,13 +24,14 @@
#include "mbfunc.h"
eMBErrorCode eMBMReadHoldingRegisters (UCHAR ucSlaveAddress, USHORT usRegStartAddress,
UBYTE ubNRegs, USHORT arusBufferOut[])
UBYTE ubNRegs, UBYTE arusBufferOut[])
{
static UCHAR ucMBFrame[5];
eMBErrorCode eStatus = MB_ENOERR;
eMBEventType eEvent;
static UCHAR ucRcvAddress;
static USHORT usLength;
UCHAR *ucRcvFrame;
/* make up request frame */
ucMBFrame[0] = MB_FUNC_READ_HOLDING_REGISTER;
......@@ -38,26 +39,24 @@ eMBErrorCode eMBMReadHoldingRegisters (UCHAR ucSlaveAddress, USHORT usRegStartA
ucMBFrame[2] = (UCHAR)(usRegStartAddress);
ucMBFrame[3] = (UCHAR)(ubNRegs >> 8);
ucMBFrame[4] = (UCHAR)(ubNRegs);
rt_kprintf("send frame [%x%x%x%x%x]\n",
ucMBFrame[0], ucMBFrame[1], ucMBFrame[2], ucMBFrame[3], ucMBFrame[4]);
/* send request frame to slave device */
eStatus = eMBRTUSend( ucSlaveAddress, ucMBFrame, 5 );
/* wait on receive event */
if( xMBPortEventGet( &eEvent ) == TRUE )
{
eStatus = eMBRTUReceive( &ucRcvAddress, &ucMBFrame, &usLength );
eStatus = eMBRTUReceive( &ucRcvAddress, &ucRcvFrame, &usLength );
if( eStatus == MB_ENOERR )
{
/* Check if the frame is for us. If not ignore the frame. */
if( ( ucRcvAddress == ucSlaveAddress ) || ( ucRcvAddress == MB_ADDRESS_BROADCAST ) )
{
/* parse and restore data */
rt_kprintf("parse and restore date here\n");
RT_ASSERT(ucRcvFrame[0] == MB_FUNC_READ_HOLDING_REGISTER);
RT_ASSERT(ucRcvFrame[1] == 2*ubNRegs)
rt_memcpy((UCHAR *)arusBufferOut, &ucRcvFrame[2], 2*ubNRegs);
}
}
}
......@@ -80,49 +79,43 @@ eMBErrorCode eMBMReadHoldingRegisters (UCHAR ucSlaveAddress, USHORT usRegStartA
** @note
*/
eMBErrorCode eMBMReadCoils (UCHAR ucSlaveAddress, USHORT usCoilStartAddress,
UBYTE ubNCoils, USHORT arusBufferOut[])
UBYTE ubNCoils, UBYTE arusBufferOut[])
{
static UCHAR ucMBFrame[5];
eMBErrorCode eStatus = MB_ENOERR;
eMBEventType eEvent;
static UCHAR ucRcvAddress;
static USHORT usLength;
/* make up request frame */
ucMBFrame[0] = MB_FUNC_READ_COILS;
ucMBFrame[1] = (UCHAR)(usCoilStartAddress >> 8);
ucMBFrame[2] = (UCHAR)(usCoilStartAddress);
ucMBFrame[3] = (UCHAR)(ubNCoils >> 8);
ucMBFrame[4] = (UCHAR)(ubNCoils);
rt_kprintf("send frame [%x%x%x%x%x]\n",
ucMBFrame[0], ucMBFrame[1], ucMBFrame[2], ucMBFrame[3], ucMBFrame[4]);
eMBErrorCode eStatus = MB_ENOERR;
eMBEventType eEvent;
static UCHAR ucRcvAddress;
static USHORT usLength;
UCHAR *ucRcvFrame;
/* make up request frame */
ucMBFrame[0] = MB_FUNC_READ_COILS;
ucMBFrame[1] = (UCHAR)(usCoilStartAddress >> 8);
ucMBFrame[2] = (UCHAR)(usCoilStartAddress);
ucMBFrame[3] = (UCHAR)(ubNCoils >> 8);
ucMBFrame[4] = (UCHAR)(ubNCoils);
/* send request frame to slave device */
eStatus = eMBRTUSend( ucSlaveAddress, ucMBFrame, 5 );
/* send request frame to slave device */
eStatus = eMBRTUSend( ucSlaveAddress, ucMBFrame, 5 );
/* wait on receive event */
if( xMBPortEventGet( &eEvent ) == TRUE )
/* wait on receive event */
if( xMBPortEventGet( &eEvent ) == TRUE )
{
eStatus = eMBRTUReceive( &ucRcvAddress, &ucRcvFrame, &usLength );
if( eStatus == MB_ENOERR )
{
eStatus = eMBRTUReceive( &ucRcvAddress, &ucMBFrame, &usLength );
if( eStatus == MB_ENOERR )
/* Check if the frame is for us. If not ignore the frame. */
if( ucRcvAddress == ucSlaveAddress )
{
/* Check if the frame is for us. If not ignore the frame. */
if( ( ucRcvAddress == ucSlaveAddress ) || ( ucRcvAddress == MB_ADDRESS_BROADCAST ) )
{
/* parse and restore data */
rt_kprintf("parse and restore date here\n");
}
RT_ASSERT(ucRcvFrame[0] == MB_FUNC_READ_COILS);
rt_memcpy((UCHAR *)arusBufferOut, &ucRcvFrame[2], ucRcvFrame[1]);
}
}
else eStatus = MB_ETIMEDOUT;
}
else eStatus = MB_ETIMEDOUT;
return eStatus;
return eStatus;
}
components/net/freemodbus/modbus/port/demo.c
浏览文件 @ dcff85f1
......@@ -24,36 +24,36 @@
#include "mbproto.h"
#include "mbfunc.h"
USHORT buf[256];
#include "varible.h"
void rt_modbus_thread_entry(void* parameter)
{
eMBErrorCode eStatus;
USHORT buf[1];
varible_group_t var_group;
var_group = varible_group_get();
eStatus = eMBInit( MB_RTU, 0x0A, 0, 115200, MB_PAR_EVEN );
/* Enable the Modbus Protocol Stack. */
eStatus = eMBEnable( );
eStatus = eMBEnable();
rt_thread_delay(50);
while(1)
{
int i = 0;
/* request holding reg */
eMBMReadHoldingRegisters(0x0A, 0x1, 0x10, buf);
rt_kprintf("stop\n");
rt_thread_delay(100);
/* request coils */
eMBMReadCoils(0x0A, 0x1, 128, buf);
rt_thread_delay(100);
var_group->table->hash_table[].
if(eMBMReadCoils(0x01, 0x0, 0x6, buf) != MB_ETIMEDOUT)
//while(1);
rt_thread_delay(100);
}
}
int modbus_demo_init(void)
int modbus_start(void)
{
rt_thread_t modbus_thread;
......
components/net/freemodbus/modbus/port/portevent.c
浏览文件 @ dcff85f1
......@@ -33,15 +33,16 @@ BOOL xMBPortEventPost( eMBEventType eEvent )
{
/* only care abot EV_FRAME_RECEIVED event */
if(eEvent == EV_FRAME_RECEIVED)
{
rt_event_send(&event, 1<<eEvent);
}
return TRUE;
}
BOOL xMBPortEventGet( eMBEventType * eEvent )
{
rt_uint32_t e;
rt_int32_t time_out = 100/(1000/RT_TICK_PER_SECOND);
rt_int32_t time_out = 3000/(1000/RT_TICK_PER_SECOND);
if(rt_event_recv(&event, (1<<EV_FRAME_RECEIVED),
RT_EVENT_FLAG_AND | RT_EVENT_FLAG_CLEAR,
......@@ -50,6 +51,11 @@ BOOL xMBPortEventGet( eMBEventType * eEvent )
*eEvent = EV_FRAME_RECEIVED;
return TRUE;
}
else return FALSE;
else
{
rt_kprintf("get event timeout\n");
return FALSE;
}
}
components/net/freemodbus/modbus/port/portserial.c
浏览文件 @ dcff85f1
......@@ -21,7 +21,7 @@
#include "mb.h"
#include "mbport.h"
#define UART1 ((struct uartport *)U1BASE)
#define UART1 ((struct uartport *)&U1BASE)
/* ----------------------- static functions ---------------------------------*/
static void rt_serial1_handler(int vector);
......@@ -73,7 +73,7 @@ BOOL xMBPortSerialInit( UCHAR ucPORT, ULONG ulBaudRate, UCHAR ucDataBits, eMBPar
UART1->ucon = 0x245;
/* Set uart0 bps */
UART1->ubrd = (rt_int32_t)(PCLK / (ulBaudRate * 16)) - 1;
for (i = 0; i < 100; i++);
SUBSRCPND |= BIT_SUB_RXD1;
......@@ -97,26 +97,25 @@ BOOL xMBPortSerialPutByte( CHAR ucByte )
BOOL xMBPortSerialGetByte( CHAR * pucByte )
{
while ((USTAT1 & USTAT_RCV_READY) == 0);
*pucByte = URXB1;
while (!(USTAT1 & USTAT_RCV_READY));
*pucByte = URXH1;
return TRUE;
}
static void rt_serial1_handler(int vector)
{
if (SUBSRCPND & BIT_SUB_RXD1)
{
SUBSRCPND |= BIT_SUB_RXD1;
prvvUARTRxISR();
}
if (SUBSRCPND & BIT_SUB_TXD1)
{
else if (SUBSRCPND & BIT_SUB_TXD1)
{
SUBSRCPND |= BIT_SUB_TXD1;
prvvUARTTxReadyISR();
}
}
}
/*
......
components/net/freemodbus/modbus/port/porttimer.c
浏览文件 @ dcff85f1
......@@ -33,14 +33,14 @@ BOOL xMBPortTimersInit(USHORT usTim1Timerout50us)
TCFG1 &= 0xffff0fff;
TCFG1 |= 0x00001000;
TCNTB3 = (rt_int32_t)(usTim1Timerout50us*(PCLK/ (4 *16* 20000))) - 1;
TCNTB3 = (rt_int32_t)(usTim1Timerout50us*(PCLK/ (4 *16* 1000))) - 1;
/* manual update */
TCON = TCON & (~(0x0f<<16)) | (0x02<<16);
/* install interrupt handler */
rt_hw_interrupt_install(INTTIMER3, prvvTIMERExpiredISR, RT_NULL);
rt_hw_interrupt_umask(INTTIMER3);
/* start timer4, reload */
/* start timer3, reload */
TCON = TCON & (~(0x0f<<16)) | (0x09<<16);
return TRUE;
......
components/net/freemodbus/modbus/rtu/mbrtu.c
浏览文件 @ dcff85f1
......@@ -207,8 +207,8 @@ eMBRTUSend( UCHAR ucSlaveAddress, const UCHAR * pucFrame, USHORT usLength )
/* Calculate CRC16 checksum for Modbus-Serial-Line-PDU. */
usCRC16 = usMBCRC16( ( UCHAR * ) pucSndBufferCur, usSndBufferCount );
ucRTUBuf[usSndBufferCount++] = ( UCHAR )( usCRC16 & 0xFF );
ucRTUBuf[usSndBufferCount++] = ( UCHAR )( usCRC16 >> 8 );
pucSndBufferCur[usSndBufferCount++] = ( UCHAR )( usCRC16 & 0xFF );
pucSndBufferCur[usSndBufferCount++] = ( UCHAR )( usCRC16 >> 8 );
/* Activate the transmitter. */
eSndState = STATE_TX_XMIT;
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或