update Stellaris Peripheral Driver Library to r8264.

git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1867 bbd45198-f89e-11dd-88c7-29a3b14d5316

bsp/lm3s9b9x/Libraries/SConscript

@@ -6,6 +6,10 @@ from building import *
 cwd     = GetCurrentDir()
 src = Glob('driverlib/*.c')
 
+# cortex-m3 no FPU.
+if rtconfig.PART_TYPE.startswith('PART_LM4F') != True:
+	 SrcRemove(src, 'fpu.c')
+
 # add for startup script 
 if rtconfig.CROSS_TOOL == 'gcc':
 	src += ['startup/gcc/start_gcc.s']
@@ -16,6 +20,7 @@ elif rtconfig.CROSS_TOOL == 'iar':
 
 CPPPATH = [cwd]
 
-group = DefineGroup('Libraries', src, depend = [''], CPPPATH = CPPPATH)
+CPPDEFINES = [rtconfig.PART_TYPE]
+group = DefineGroup('Libraries', src, depend = [''], CPPPATH = CPPPATH, CPPDEFINES = CPPDEFINES)
 
 Return('group')

bsp/lm3s9b9x/Libraries/driverlib/adc.h

@@ -2,7 +2,7 @@
 //
 // adc.h - ADC headers for using the ADC driver functions.
 //
-// Copyright (c) 2005-2010 Texas Instruments Incorporated.  All rights reserved.
+// Copyright (c) 2005-2011 Texas Instruments Incorporated.  All rights reserved.
 // Software License Agreement
 // 
 // Texas Instruments (TI) is supplying this software for use solely and
@@ -18,7 +18,7 @@
 // CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
 // DAMAGES, FOR ANY REASON WHATSOEVER.
 // 
-// This is part of revision 6459 of the Stellaris Peripheral Driver Library.
+// This is part of revision 8264 of the Stellaris Peripheral Driver Library.
 //
 //*****************************************************************************
 
@@ -80,6 +80,14 @@ extern "C"
 #define ADC_CTL_CH13            0x0000000D  // Input channel 13
 #define ADC_CTL_CH14            0x0000000E  // Input channel 14
 #define ADC_CTL_CH15            0x0000000F  // Input channel 15
+#define ADC_CTL_CH16            0x00000100  // Input channel 16
+#define ADC_CTL_CH17            0x00000101  // Input channel 17
+#define ADC_CTL_CH18            0x00000102  // Input channel 18
+#define ADC_CTL_CH19            0x00000103  // Input channel 19
+#define ADC_CTL_CH20            0x00000104  // Input channel 20
+#define ADC_CTL_CH21            0x00000105  // Input channel 21
+#define ADC_CTL_CH22            0x00000106  // Input channel 22
+#define ADC_CTL_CH23            0x00000107  // Input channel 23
 #define ADC_CTL_CMP0            0x00080000  // Select Comparator 0
 #define ADC_CTL_CMP1            0x00090000  // Select Comparator 1
 #define ADC_CTL_CMP2            0x000A0000  // Select Comparator 2
@@ -173,6 +181,15 @@ extern "C"
 //*****************************************************************************
 #define ADC_REF_INT             0x00000000  // Internal reference
 #define ADC_REF_EXT_3V          0x00000001  // External 3V reference
+#define ADC_REF_EXT_1V          0x00000003  // External 1V reference
+
+//*****************************************************************************
+//
+// Values that can be passed to ADCResolutionSet as the ulResolution parameter.
+//
+//*****************************************************************************
+#define ADC_RES_10BIT           0x00000000  // 10-bit resolution
+#define ADC_RES_12BIT           0x00000010  // 12-bit resolution
 
 //*****************************************************************************
 //
@@ -243,6 +260,8 @@ extern void ADCComparatorIntClear(unsigned long ulBase,
                                   unsigned long ulStatus);
 extern void ADCReferenceSet(unsigned long ulBase, unsigned long ulRef);
 extern unsigned long ADCReferenceGet(unsigned long ulBase);
+extern void ADCResolutionSet(unsigned long ulBase, unsigned long ulResolution);
+extern unsigned long ADCResolutionGet(unsigned long ulBase);
 extern void ADCPhaseDelaySet(unsigned long ulBase, unsigned long ulPhase);
 extern unsigned long ADCPhaseDelayGet(unsigned long ulBase);
 

bsp/lm3s9b9x/Libraries/driverlib/can.h

@@ -2,7 +2,7 @@
 //
 // can.h - Defines and Macros for the CAN controller.
 //
-// Copyright (c) 2006-2010 Texas Instruments Incorporated.  All rights reserved.
+// Copyright (c) 2006-2011 Texas Instruments Incorporated.  All rights reserved.
 // Software License Agreement
 // 
 // Texas Instruments (TI) is supplying this software for use solely and
@@ -18,7 +18,7 @@
 // CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
 // DAMAGES, FOR ANY REASON WHATSOEVER.
 // 
-// This is part of revision 6459 of the Stellaris Peripheral Driver Library.
+// This is part of revision 8264 of the Stellaris Peripheral Driver Library.
 //
 //*****************************************************************************
 
@@ -179,25 +179,25 @@ typedef struct
     //! Buffer 1 segments, measured in time quanta.  The valid values for this
     //! setting range from 2 to 16.
     //
-    unsigned int uSyncPropPhase1Seg;
+    unsigned long ulSyncPropPhase1Seg;
 
     //
     //! This value holds the Phase Buffer 2 segment in time quanta.  The valid
     //! values for this setting range from 1 to 8.
     //
-    unsigned int uPhase2Seg;
+    unsigned long ulPhase2Seg;
 
     //
     //! This value holds the Resynchronization Jump Width in time quanta.  The
     //! valid values for this setting range from 1 to 4.
     //
-    unsigned int uSJW;
+    unsigned long ulSJW;
 
     //
     //! This value holds the CAN_CLK divider used to determine time quanta.
     //! The valid values for this setting range from 1 to 1023.
     //
-    unsigned int uQuantumPrescaler;
+    unsigned long ulQuantumPrescaler;
 }
 tCANBitClkParms;
 

bsp/lm3s9b9x/Libraries/driverlib/comp.c

@@ -2,7 +2,7 @@
 //
 // comp.c - Driver for the analog comparator.
 //
-// Copyright (c) 2005-2010 Texas Instruments Incorporated.  All rights reserved.
+// Copyright (c) 2005-2011 Texas Instruments Incorporated.  All rights reserved.
 // Software License Agreement
 // 
 // Texas Instruments (TI) is supplying this software for use solely and
@@ -18,7 +18,7 @@
 // CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
 // DAMAGES, FOR ANY REASON WHATSOEVER.
 // 
-// This is part of revision 6459 of the Stellaris Peripheral Driver Library.
+// This is part of revision 8264 of the Stellaris Peripheral Driver Library.
 //
 //*****************************************************************************
 
@@ -45,8 +45,8 @@
 //! \param ulComp is the index of the comparator to configure.
 //! \param ulConfig is the configuration of the comparator.
 //!
-//! This function will configure a comparator.  The \e ulConfig parameter is
-//! the result of a logical OR operation between the \b COMP_TRIG_xxx,
+//! This function configures a comparator.  The \e ulConfig parameter is the
+//! result of a logical OR operation between the \b COMP_TRIG_xxx,
 //! \b COMP_INT_xxx, \b COMP_ASRCP_xxx, and \b COMP_OUTPUT_xxx values.
 //!
 //! The \b COMP_TRIG_xxx term can take on the following values:
@@ -117,8 +117,8 @@ ComparatorConfigure(unsigned long ulBase, unsigned long ulComp,
 //! \param ulBase is the base address of the comparator module.
 //! \param ulRef is the desired reference voltage.
 //!
-//! This function will set the internal reference voltage value.  The voltage
-//! is specified as one of the following values:
+//! This function sets the internal reference voltage value.  The voltage is
+//! specified as one of the following values:
 //!
 //! - \b COMP_REF_OFF to turn off the reference voltage
 //! - \b COMP_REF_0V to set the reference voltage to 0 V
@@ -212,9 +212,9 @@ ComparatorValueGet(unsigned long ulBase, unsigned long ulComp)
 //! \param pfnHandler is a pointer to the function to be called when the
 //! comparator interrupt occurs.
 //!
-//! This sets the handler to be called when the comparator interrupt occurs.
-//! This will enable the interrupt in the interrupt controller; it is the
-//! interrupt-handler's responsibility to clear the interrupt source via
+//! This function sets the handler to be called when the comparator interrupt occurs
+//! and enables the interrupt in the interrupt controller.  It is the interrupt
+//! handler's responsibility to clear the interrupt source via
 //! ComparatorIntClear().
 //!
 //! \sa IntRegister() for important information about registering interrupt
@@ -256,9 +256,9 @@ ComparatorIntRegister(unsigned long ulBase, unsigned long ulComp,
 //! \param ulBase is the base address of the comparator module.
 //! \param ulComp is the index of the comparator.
 //!
-//! This function will clear the handler to be called when a comparator
-//! interrupt occurs.  This will also mask off the interrupt in the interrupt
-//! controller so that the interrupt handler no longer is called.
+//! This function clears the handler to be called when a comparator interrupt
+//! occurs.  This function also masks off the interrupt in the interrupt controller
+//! so that the interrupt handler no longer is called.
 //!
 //! \sa IntRegister() for important information about registering interrupt
 //! handlers.
@@ -299,7 +299,7 @@ ComparatorIntUnregister(unsigned long ulBase, unsigned long ulComp)
 //! \param ulComp is the index of the comparator.
 //!
 //! This function enables generation of an interrupt from the specified
-//! comparator.  Only comparators whose interrupts are enabled can be reflected
+//! comparator.  Only enabled comparator interrupts can be reflected
 //! to the processor.
 //!
 //! \return None.
@@ -328,7 +328,7 @@ ComparatorIntEnable(unsigned long ulBase, unsigned long ulComp)
 //! \param ulComp is the index of the comparator.
 //!
 //! This function disables generation of an interrupt from the specified
-//! comparator.  Only comparators whose interrupts are enabled can be reflected
+//! comparator.  Only enabled comparator interrupts can be reflected
 //! to the processor.
 //!
 //! \return None.
@@ -358,7 +358,7 @@ ComparatorIntDisable(unsigned long ulBase, unsigned long ulComp)
 //! \param bMasked is \b false if the raw interrupt status is required and
 //! \b true if the masked interrupt status is required.
 //!
-//! This returns the interrupt status for the comparator.  Either the raw or
+//! This function returns the interrupt status for the comparator.  Either the raw or
 //! the masked interrupt status can be returned.
 //!
 //! \return \b true if the interrupt is asserted and \b false if it is not
@@ -397,18 +397,18 @@ ComparatorIntStatus(unsigned long ulBase, unsigned long ulComp,
 //! \param ulComp is the index of the comparator.
 //!
 //! The comparator interrupt is cleared, so that it no longer asserts.  This
-//! must be done in the interrupt handler to keep it from being called again
-//! immediately upon exit.  Note that for a level triggered interrupt, the
-//! interrupt cannot be cleared until it stops asserting.
+//! fucntion must be called in the interrupt handler to keep the handler from
+//! being called again immediately upon exit.  Note that for a level-triggered
+//! interrupt, the interrupt cannot be cleared until it stops asserting.
 //!
-//! \note Since there is a write buffer in the Cortex-M3 processor, it may take
-//! several clock cycles before the interrupt source is actually cleared.
+//! \note Because there is a write buffer in the Cortex-M processor, it may
+//! take several clock cycles before the interrupt source is actually cleared.
 //! Therefore, it is recommended that the interrupt source be cleared early in
 //! the interrupt handler (as opposed to the very last action) to avoid
 //! returning from the interrupt handler before the interrupt source is
 //! actually cleared.  Failure to do so may result in the interrupt handler
-//! being immediately reentered (since NVIC still sees the interrupt source
-//! asserted).
+//! being immediately reentered (because the interrupt controller still sees
+//! the interrupt source asserted).
 //!
 //! \return None.
 //

bsp/lm3s9b9x/Libraries/driverlib/comp.h

@@ -2,7 +2,7 @@
 //
 // comp.h - Prototypes for the analog comparator driver.
 //
-// Copyright (c) 2005-2010 Texas Instruments Incorporated.  All rights reserved.
+// Copyright (c) 2005-2011 Texas Instruments Incorporated.  All rights reserved.
 // Software License Agreement
 // 
 // Texas Instruments (TI) is supplying this software for use solely and
@@ -18,7 +18,7 @@
 // CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
 // DAMAGES, FOR ANY REASON WHATSOEVER.
 // 
-// This is part of revision 6459 of the Stellaris Peripheral Driver Library.
+// This is part of revision 8264 of the Stellaris Peripheral Driver Library.
 //
 //*****************************************************************************
 

bsp/lm3s9b9x/Libraries/driverlib/cpu.c

@@ -3,7 +3,7 @@
 // cpu.c - Instruction wrappers for special CPU instructions needed by the
 //         drivers.
 //
-// Copyright (c) 2006-2010 Texas Instruments Incorporated.  All rights reserved.
+// Copyright (c) 2006-2011 Texas Instruments Incorporated.  All rights reserved.
 // Software License Agreement
 // 
 // Texas Instruments (TI) is supplying this software for use solely and
@@ -19,7 +19,7 @@
 // CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
 // DAMAGES, FOR ANY REASON WHATSOEVER.
 // 
-// This is part of revision 6459 of the Stellaris Peripheral Driver Library.
+// This is part of revision 8264 of the Stellaris Peripheral Driver Library.
 //
 //*****************************************************************************
 
@@ -360,8 +360,7 @@ CPUbasepriSet(unsigned long ulNewBasepri)
     //
     // Set the BASEPRI register
     //
-    __asm("    msr     BASEPRI, r0\n"
-          "    bx      lr\n");
+    __asm("    msr     BASEPRI, r0\n");
 }
 #endif
 

bsp/lm3s9b9x/Libraries/driverlib/cpu.h

@@ -2,7 +2,7 @@
 //
 // cpu.h - Prototypes for the CPU instruction wrapper functions.
 //
-// Copyright (c) 2006-2010 Texas Instruments Incorporated.  All rights reserved.
+// Copyright (c) 2006-2011 Texas Instruments Incorporated.  All rights reserved.
 // Software License Agreement
 // 
 // Texas Instruments (TI) is supplying this software for use solely and
@@ -18,7 +18,7 @@
 // CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
 // DAMAGES, FOR ANY REASON WHATSOEVER.
 // 
-// This is part of revision 6459 of the Stellaris Peripheral Driver Library.
+// This is part of revision 8264 of the Stellaris Peripheral Driver Library.
 //
 //*****************************************************************************
 

bsp/lm3s9b9x/Libraries/driverlib/cr_project.xml

-<!--
-Configuration file for Code Red project libdriver
-
-Copyright (c) 2005-2010 Texas Instruments Incorporated.  All rights reserved.
-Software License Agreement
-
-Texas Instruments (TI) is supplying this software for use solely and
-exclusively on TI's microcontroller products. The software is owned by
-TI and/or its suppliers, and is protected under applicable copyright
-laws. You may not combine this software with "viral" open-source
-software in order to form a larger program.
-
-THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
-NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
-NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
-CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
-DAMAGES, FOR ANY REASON WHATSOEVER.
-
-This is part of revision 6459 of the Stellaris Peripheral Driver Library.
--->
-
-<project chip="LM3S101"
-         target="driver"
-         type="Static library"
-         vendor="LMI">
-  <import src=".">
-    <exclude>{(Makefile|ccs|codered|ewarm|gcc|rvmdk|sourcerygxx)}</exclude>
-    <exclude>{.*\.(ewd|ewp|eww|icf|Opt|sct|sgxx|Uv2|uvopt|uvproj|xml|ld|cmd)}</exclude>
-  </import>
-  <requires>
-    <value>inc</value>
-  </requires>
-  <setting id="assembler.def">
-    <value>codered</value>
-  </setting>
-  <setting id="compiler.def"
-           buildType="Debug"
-           mode="replace">
-    <value>DEBUG</value>
-  </setting>
-  <setting id="compiler.def"
-           buildType="Release"
-           mode="replace">
-    <value>NDEBUG</value>
-  </setting>
-  <setting id="compiler.def">
-    <value>__CODE_RED</value>
-    <value>codered</value>
-    <value>PART_LM3S101</value>
-  </setting>
-  <setting id="compiler.opt"
-           buildType="Debug">
-    <value>-Os</value>
-  </setting>
-  <setting id="compiler.opt"
-           buildType="Release">
-    <value>-Os</value>
-  </setting>
-  <setting id="compiler.flags"
-           buildType="Debug">
-    <value>-Os</value>
-  </setting>
-  <setting id="compiler.flags"
-           buildType="Release">
-    <value>-Os</value>
-  </setting>
-  <setting id="compiler.inc">
-    <value>${workspace_loc:/}</value>
-  </setting>
-</project>

bsp/lm3s9b9x/Libraries/driverlib/debug.h

@@ -2,7 +2,7 @@
 //
 // debug.h - Macros for assisting debug of the driver library.
 //
-// Copyright (c) 2006-2010 Texas Instruments Incorporated.  All rights reserved.
+// Copyright (c) 2006-2011 Texas Instruments Incorporated.  All rights reserved.
 // Software License Agreement
 // 
 // Texas Instruments (TI) is supplying this software for use solely and
@@ -18,7 +18,7 @@
 // CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
 // DAMAGES, FOR ANY REASON WHATSOEVER.
 // 
-// This is part of revision 6459 of the Stellaris Peripheral Driver Library.
+// This is part of revision 8264 of the Stellaris Peripheral Driver Library.
 //
 //*****************************************************************************
 

bsp/lm3s9b9x/Libraries/driverlib/driverlib.Opt

-### uVision2 Project, (C) Keil Software
-### Do not modify !
-
- cExt (*.c)
- aExt (*.s*; *.src; *.a*)
- oExt (*.obj)
- lExt (*.lib)
- tExt (*.txt; *.h; *.inc)
- pExt (*.plm)
- CppX (*.cpp)
- DaveTm { 0,0,0,0,0,0,0,0 }
-
-Target (driverlib), 0x0004 // Tools: 'ARM-ADS'
-GRPOPT 1,(Source),1,0,0
-GRPOPT 2,(Documentation),1,0,0
-
-OPTFFF 1,1,1,0,0,0,0,0,<.\adc.c><adc.c>
-OPTFFF 1,2,1,0,0,0,0,0,<.\can.c><can.c>
-OPTFFF 1,3,1,0,0,0,0,0,<.\comp.c><comp.c>
-OPTFFF 1,4,1,0,0,0,0,0,<.\cpu.c><cpu.c>
-OPTFFF 1,5,1,0,0,0,0,0,<.\epi.c><epi.c>
-OPTFFF 1,6,1,0,0,0,0,0,<.\ethernet.c><ethernet.c>
-OPTFFF 1,7,1,0,0,0,0,0,<.\flash.c><flash.c>
-OPTFFF 1,8,1,0,0,0,0,0,<.\gpio.c><gpio.c>
-OPTFFF 1,9,1,0,0,0,0,0,<.\hibernate.c><hibernate.c>
-OPTFFF 1,10,1,0,0,0,0,0,<.\i2c.c><i2c.c>
-OPTFFF 1,11,1,0,0,0,0,0,<.\i2s.c><i2s.c>
-OPTFFF 1,12,1,0,0,0,0,0,<.\interrupt.c><interrupt.c>
-OPTFFF 1,13,1,0,0,0,0,0,<.\mpu.c><mpu.c>
-OPTFFF 1,14,1,0,0,0,0,0,<.\pwm.c><pwm.c>
-OPTFFF 1,15,1,0,0,0,0,0,<.\qei.c><qei.c>
-OPTFFF 1,16,1,0,0,0,0,0,<.\ssi.c><ssi.c>
-OPTFFF 1,17,1,0,0,0,0,0,<.\sysctl.c><sysctl.c>
-OPTFFF 1,18,1,0,0,0,0,0,<.\systick.c><systick.c>
-OPTFFF 1,19,1,0,0,0,0,0,<.\timer.c><timer.c>
-OPTFFF 1,20,1,0,0,0,0,0,<.\uart.c><uart.c>
-OPTFFF 1,21,1,0,0,0,0,0,<.\udma.c><udma.c>
-OPTFFF 1,22,1,0,0,0,0,0,<.\usb.c><usb.c>
-OPTFFF 1,23,1,0,0,0,0,0,<.\watchdog.c><watchdog.c>
-OPTFFF 2,24,5,2,0,1,1,0,<.\readme.txt><readme.txt> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,0,0,0,0,0,0,0,0,217,2,0,0,44,1,0,0 }
-
-ExtF <.\readme.txt> 1,1,0,{ 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,0,0,0,0,0,0,0,0,217,2,0,0,44,1,0,0 }
-
-TARGOPT 1, (driverlib)
- ADSCLK=20000000
-  OPTTT 1,1,1,0
-  OPTHX 1,65535,0,0,0
-  OPTLX 79,66,8,<.\rvmdk\>
-  OPTOX 16
-  OPTLT 1,1,1,0,1,1,0,1,0,0,0,0
-  OPTXL 1,1,1,1,1,1,1,0,0
-  OPTFL 1,0,1
-  OPTBL 0,(Data Sheet)<DATASHTS\Luminary\LM3S101.PDF>
-  OPTDL (SARMCM3.DLL)()(DLM.DLL)(-pLM3S101)(SARMCM3.DLL)()(TLM.DLL)(-pLM3S101)
-  OPTDBG 48125,1,()()()()()()()()()() (BIN\UL2CM3.DLL)()()()
-  OPTDF 0x40000002
-  OPTLE <>
-  OPTLC <>
-EndOpt

bsp/lm3s9b9x/Libraries/driverlib/driverlib.Uv2

-### uVision2 Project, (C) Keil Software
-### Do not modify !
-
-Target (driverlib), 0x0004 // Tools: 'ARM-ADS'
-
-Group (Source)
-Group (Documentation)
-
-File 1,1,<.\adc.c><adc.c> 0x0
-File 1,1,<.\can.c><can.c> 0x0
-File 1,1,<.\comp.c><comp.c> 0x0
-File 1,1,<.\cpu.c><cpu.c> 0x0
-File 1,1,<.\epi.c><epi.c> 0x0
-File 1,1,<.\ethernet.c><ethernet.c> 0x0
-File 1,1,<.\flash.c><flash.c> 0x0
-File 1,1,<.\gpio.c><gpio.c> 0x0
-File 1,1,<.\hibernate.c><hibernate.c> 0x0
-File 1,1,<.\i2c.c><i2c.c> 0x0
-File 1,1,<.\i2s.c><i2s.c> 0x0
-File 1,1,<.\interrupt.c><interrupt.c> 0x0
-File 1,1,<.\mpu.c><mpu.c> 0x0
-File 1,1,<.\pwm.c><pwm.c> 0x0
-File 1,1,<.\qei.c><qei.c> 0x0
-File 1,1,<.\ssi.c><ssi.c> 0x0
-File 1,1,<.\sysctl.c><sysctl.c> 0x0
-File 1,1,<.\systick.c><systick.c> 0x0
-File 1,1,<.\timer.c><timer.c> 0x0
-File 1,1,<.\uart.c><uart.c> 0x0
-File 1,1,<.\udma.c><udma.c> 0x0
-File 1,1,<.\usb.c><usb.c> 0x0
-File 1,1,<.\watchdog.c><watchdog.c> 0x0
-File 2,5,<.\readme.txt><readme.txt> 0x0
-
-
-Options 1,0,0  // Target 'driverlib'
- Device (LM3S101)
- Vendor (Luminary Micro)
- Cpu (IRAM(0x20000000-0x200007FF) IROM(0-0x1FFF) CLOCK(20000000) CPUTYPE("Cortex-M3"))
- FlashUt ()
- StupF ("STARTUP\Luminary\Startup.s" ("Luminary Startup Code"))
- FlashDR (UL2CM3(-UU0101L5E -O14 -S0 -C0 -N00("ARM Cortex-M3") -D00(1BA00477) -L00(4) -FO7 -FD20000000 -FC800 -FN1 -FF0LM3S_8 -FS00 -FL02000))
- DevID (4079)
- Rgf (LM3Sxxx.H)
- Mem ()
- C ()
- A ()
- RL ()
- OH ()
- DBC_IFX ()
- DBC_CMS ()
- DBC_AMS ()
- DBC_LMS ()
- UseEnv=0
- EnvBin ()
- EnvInc ()
- EnvLib ()
- EnvReg (Luminary\)
- OrgReg (Luminary\)
- TgStat=0
- OutDir (.\rvmdk\)
- OutName (driverlib)
- GenApp=0
- GenLib=1
- GenHex=0
- Debug=1
- Browse=1
- LstDir (.\rvmdk\)
- HexSel=1
- MG32K=0
- TGMORE=0
- RunUsr 0 0 <>
- RunUsr 1 0 <>
- BrunUsr 0 0 <>
- BrunUsr 1 0 <>
- CrunUsr 0 0 <>
- CrunUsr 1 0 <>
- SVCSID <>
- GLFLAGS=1790
- ADSFLGA { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
- ACPUTYP (Cortex-M3)
- ADSTFLGA { 0,12,0,18,99,0,0,66,0,0,0,0,0,0,0,0,0,0,0,0 }
- OCMADSOCM { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
- OCMADSIRAM { 0,0,0,0,32,0,128,0,0 }
- OCMADSIROM { 1,0,0,0,0,0,120,1,0 }
- OCMADSXRAM { 0,0,0,0,0,0,0,0,0 }
- OCR_RVCT { 1,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,1,0,0,0,0,0,32,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,32,0,8,0,0,0,0,0,0,0,0,0,0,0 }
- RV_STAVEC ()
- ADSCCFLG { 12,34,0,4,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
- ADSCMISC ()
- ADSCDEFN (rvmdk)
- ADSCUDEF ()
- ADSCINCD (..;)
- ADSASFLG { 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
- ADSAMISC ()
- ADSADEFN ()
- ADSAUDEF ()
- ADSAINCD ()
- PropFld { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
- IncBld=1
- AlwaysBuild=0
- GenAsm=0
- AsmAsm=0
- PublicsOnly=0
- StopCode=3
- CustArgs ()
- LibMods ()
- ADSLDFG { 16,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
- ADSLDTA (0x00000000)
- ADSLDDA (0x20000000)
- ADSLDSC ()
- ADSLDIB ()
- ADSLDIC ()
- ADSLDMC ()
- ADSLDIF ()
- ADSLDDW ()
-  OPTDL (SARMCM3.DLL)()(DLM.DLL)(-pLM3S101)(SARMCM3.DLL)()(TLM.DLL)(-pLM3S101)
-  OPTDBG 48125,1,()()()()()()()()()() (BIN\UL2CM3.DLL)()()()
- FLASH1 { 1,0,0,0,1,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0 }
- FLASH2 (BIN\UL2CM3.DLL)
- FLASH3 ("" ())
- FLASH4 ()
-EndOpt

bsp/lm3s9b9x/Libraries/driverlib/eeprom.h

+//*****************************************************************************
+//
+// eeprom.h - Prototypes for the EEPROM driver.
+//
+// Copyright (c) 2010-2011 Texas Instruments Incorporated.  All rights reserved.
+// Software License Agreement
+// 
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+// 
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+// 
+// This is part of revision 8264 of the Stellaris Peripheral Driver Library.
+//
+//*****************************************************************************
+
+#ifndef __EEPROM_H__
+#define __EEPROM_H__
+
+//*****************************************************************************
+//
+// If building with a C++ compiler, make all of the definitions in this header
+// have a C binding.
+//
+//*****************************************************************************
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+//*****************************************************************************
+//
+//! \addtogroup eeprom_api
+//! @{
+//
+//*****************************************************************************
+
+//*****************************************************************************
+//
+// Values returned by EEPROMInit.
+//
+//*****************************************************************************
+
+//
+//! This value may be returned from a call to EEPROMInit().  It indicates that
+//! no previous write operations were interrupted by a reset event and that the
+//! EEPROM peripheral is ready for use.
+//
+#define EEPROM_INIT_OK      0
+
+//
+//! This value may be returned from a call to EEPROMInit().  It indicates that
+//! a previous data or protection write operation was interrupted by a reset
+//! event.  The EEPROM peripheral has recovered its state but the last write
+//! operation may have been lost.  The application must check the validity of
+//! data it has written and retry any writes as required.
+//
+#define EEPROM_INIT_RETRY   1
+
+//
+//! This value may be returned from a call to EEPROMInit(). It indicates that a
+//! previous data or protection write operation was interrupted by a reset
+//! event and that the EEPROM peripheral was unable to clean up after the
+//! problem.  This situation may be resolved with another reset or may be fatal
+//! depending upon the cause of the problem.  For example, if the voltage to
+//! the part is unstable, retrying once the voltage has stabilized may clear
+//! the error.
+//
+#define EEPROM_INIT_ERROR   2
+
+//*****************************************************************************
+//
+// Error indicators returned by various EEPROM API calls.  These will be ORed
+// together into the final return code.
+//
+//*****************************************************************************
+
+//
+//! This return code bit indicates that the EEPROM programming state machine
+//! failed to write a value due to the voltage level dropping below that
+//! required for EEPROM programming.  The operation may be retried once the
+//! voltage stabilizes.
+//
+#define EEPROM_RC_INVPL             0x00000100
+
+//
+//! This return code bit indicates that an attempt was made to read from
+//! the EEPROM while a write operation was in progress.
+//
+#define EEPROM_RC_WRBUSY            0x00000020
+
+//
+//! This return code bit indicates that an attempt was made to write a
+//! value but the destination permissions disallow write operations.  This
+//! may be due to the destination block being locked, access protection set
+//! to prohibit writes or an attempt to write a password when one is already
+//! written.
+//
+#define EEPROM_RC_NOPERM            0x00000010
+
+//
+//! This return code bit indicates that the EEPROM programming state machine
+//! is currently copying to or from the internal copy buffer to make room for
+//! a newly written value.  It is provided as a status indicator and does not
+//! indicate an error.
+//
+#define EEPROM_RC_WKCOPY            0x00000008
+
+//
+//! This return code bit indicates that the EEPROM programming state machine
+//! is currently erasing the internal copy buffer.  It is provided as a
+//! status indicator and does not indicate an error.
+//
+#define EEPROM_RC_WKERASE           0x00000004
+
+//
+//! This return code bit indicates that the EEPROM programming state machine
+//! is currently working.  No new write operations should be attempted until
+//! this bit is clear.
+//
+#define EEPROM_RC_WORKING           0x00000001
+
+//*****************************************************************************
+//
+// Values that can be passed to EEPROMBlockProtectSet() in the ulProtect
+// parameter, and returned by EEPROMBlockProtectGet().
+//
+//*****************************************************************************
+
+//
+//! This bit may be ORed with the protection option passed to
+//! EEPROMBlockProtectSet() or returned from EEPROMBlockProtectGet().  It
+//! restricts EEPROM access to threads running in supervisor mode and prevents
+//! access to an EEPROM block when the CPU is in user mode.
+//
+#define EEPROM_PROT_SUPERVISOR_ONLY 0x00000008
+
+//
+//! This value may be passed to EEPROMBlockProtectSet() or returned from
+//! EEPROMBlockProtectGet().  It indicates that the block should offer
+//! read/write access when no password is set or when a password is set and
+//! the block is unlocked, and read-only access when a password is set but
+//! the block is locked.
+//
+#define EEPROM_PROT_RW_LRO_URW      0x00000000
+
+//
+//! This value may be passed to EEPROMBlockProtectSet() or returned from
+//! EEPROMBlockProtectGet().  It indicates that the block should offer neither
+//! read nor write access unless it is protected by a password and unlocked.
+//
+#define EEPROM_PROT_NA_LNA_URW      0x00000001
+
+//
+//! This value may be passed to EEPROMBlockProtectSet() or returned from
+//! EEPROMBlockProtectGet().  It indicates that the block should offer
+//! read-only access when no password is set or when a password is set and the
+//! block is unlocked.  When a password is set and the block is locked, neither
+//! read nor write access is permitted.
+//
+#define EEPROM_PROT_RO_LNA_URO      0x00000002
+
+//*****************************************************************************
+//
+//! This value may be passed to EEPROMIntEnable() and EEPROMIntDisable() and is
+//! returned by EEPROMIntStatus() if an EEPROM interrupt is currently being
+//! signaled.
+//
+//*****************************************************************************
+#define EEPROM_INT_PROGRAM          0x00000004
+
+//*****************************************************************************
+//
+//! Returns the EEPROM block number containing a given offset address.
+//!
+//! \param ulAddr is the linear, byte address of the EEPROM location whose
+//! block number is to be returned.  This is a zero-based offset from the start
+//! of the EEPROM storage.
+//!
+//! This macro may be used to translate an EEPROM address offset into a
+//! block number suitable for use in any of the driver's block protection
+//! functions.  The address provided is expressed as a byte offset from the
+//! base of the EEPROM.
+//!
+//! \return Returns the zero-based block number which contains the passed
+//! address.
+//
+//*****************************************************************************
+#define EEPROMBlockFromAddr(ulAddr) ((ulAddr) >> 6)
+
+//*****************************************************************************
+//
+//! Returns the offset address of the first word in an EEPROM block.
+//!
+//! \param ulBlock is the index of the EEPROM block whose first word address
+//! is to be returned.
+//!
+//! This macro may be used to determine the address of the first word in a
+//! given EEPROM block.  The address returned is expressed as a byte offset
+//! from the base of EEPROM storage.
+//!
+//! \return Returns the address of the first word in the given EEPROM block.
+//
+//*****************************************************************************
+#define EEPROMAddrFromBlock(ulBlock) ((ulBlock) << 6)
+
+//*****************************************************************************
+//
+// Prototypes for the APIs.
+//
+//*****************************************************************************
+extern unsigned long EEPROMInit(void);
+extern unsigned long EEPROMSizeGet(void);
+extern unsigned long EEPROMBlockCountGet(void);
+extern void EEPROMRead(unsigned long *pulData, unsigned long ulAddress,
+                       unsigned long ulCount);
+extern unsigned long EEPROMProgram(unsigned long *pulData,
+                                   unsigned long ulAddress,
+                                   unsigned long ulCount);
+extern unsigned long EEPROMProgramNonBlocking(unsigned long ulData,
+                                              unsigned long ulAddress);
+extern unsigned long EEPROMStatusGet(void);
+extern unsigned long EEPROMMassErase(void);
+extern unsigned long EEPROMBlockProtectGet(unsigned long ulBlock);
+extern unsigned long EEPROMBlockProtectSet(unsigned long ulBlock,
+                                           unsigned long ulProtect);
+extern unsigned long EEPROMBlockPasswordSet(unsigned long ulBlock,
+                                            unsigned long *pulPassword,
+                                            unsigned long ulCount);
+extern unsigned long EEPROMBlockLock(unsigned long ulBlock);
+extern unsigned long EEPROMBlockUnlock(unsigned long ulBlock,
+                                       unsigned long *pulPassword,
+                                       unsigned long ulCount);
+extern void EEPROMBlockHide(unsigned long ulBlock);
+extern void EEPROMIntEnable(unsigned long ulIntFlags);
+extern void EEPROMIntDisable(unsigned long ulIntFlags);
+extern unsigned long EEPROMIntStatus(tBoolean bMasked);
+extern void EEPROMIntClear(unsigned long ulIntFlags);
+
+//*****************************************************************************
+//
+// Close the Doxygen group.
+//! @}
+//
+//*****************************************************************************
+
+//*****************************************************************************
+//
+// Mark the end of the C bindings section for C++ compilers.
+//
+//*****************************************************************************
+#ifdef __cplusplus
+}
+#endif
+
+#endif // __EEPROM_H__

bsp/lm3s9b9x/Libraries/driverlib/epi.c

@@ -2,7 +2,7 @@
 //
 // epi.c - Driver for the EPI module.
 //
-// Copyright (c) 2008-2010 Texas Instruments Incorporated.  All rights reserved.
+// Copyright (c) 2008-2011 Texas Instruments Incorporated.  All rights reserved.
 // Software License Agreement
 // 
 // Texas Instruments (TI) is supplying this software for use solely and
@@ -18,7 +18,7 @@
 // CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
 // DAMAGES, FOR ANY REASON WHATSOEVER.
 // 
-// This is part of revision 6459 of the Stellaris Peripheral Driver Library.
+// This is part of revision 8264 of the Stellaris Peripheral Driver Library.
 //
 //*****************************************************************************
 
@@ -50,9 +50,10 @@
 //! - \b EPI_MODE_GENERAL - use for general-purpose mode operation
 //! - \b EPI_MODE_SDRAM - use with SDRAM device
 //! - \b EPI_MODE_HB8 - use with host-bus 8-bit interface
+//! - \b EPI_MODE_HB16 - use with host-bus 16-bit interface
 //! - \b EPI_MODE_DISABLE - disable the EPI module
 //!
-//! Selection of any of the above modes will enable the EPI module, except
+//! Selection of any of the above modes enables the EPI module, except
 //! for \b EPI_MODE_DISABLE which should be used to disable the module.
 //!
 //! \return None.
@@ -68,6 +69,7 @@ EPIModeSet(unsigned long ulBase, unsigned long ulMode)
     ASSERT((ulMode == EPI_MODE_GENERAL) ||
            (ulMode == EPI_MODE_SDRAM) ||
            (ulMode == EPI_MODE_HB8) ||
+           (ulMode == EPI_MODE_HB16) ||
            (ulMode == EPI_MODE_DISABLE));
 
     //
@@ -84,15 +86,15 @@ EPIModeSet(unsigned long ulBase, unsigned long ulMode)
 //! \param ulDivider is the value of the clock divider to be applied to
 //! the external interface (0-65535).
 //!
-//! This functions sets the clock divider(s) that will be used to determine the
+//! This function sets the clock divider(s) that is used to determine the
 //! clock rate of the external interface.  The \e ulDivider value is used to
-//! derive the EPI clock rate from the system clock based upon the following
+//! derive the EPI clock rate from the system clock based on the following
 //! formula.
 //!
 //! EPIClock = (Divider == 0) ? SysClk : (SysClk / (((Divider / 2) + 1) * 2))
 //!
 //! For example, a divider value of 1 results in an EPI clock rate of half
-//! the system clock, value of 2 or 3 yield one quarter of the system clock and
+//! the system clock, value of 2 or 3 yields one quarter of the system clock and
 //! a value of 4 results in one sixth of the system clock rate.
 //!
 //! In cases where a dual chip select mode is in use and different clock rates
@@ -213,16 +215,15 @@ EPIConfigSDRAMSet(unsigned long ulBase, unsigned long ulConfig,
 //! rate resulting from the divider in the lower 16 bits of the parameter passed
 //! to EPIDividerSet().
 //! - one of \b EPI_HB8_CSCFG_CS, \b EPI_HB8_CSCFG_ALE,
-//! \b EPI_HB8_CSCFG_DUAL_CS or \b EPI_HB8_CSCFG_ALE_DUAL. \b EPI_HB8_CSCFG_CS
-//! sets EPI30 to operate as a Chip Select (CSn) signal.  When using this mode,
-//! \b EPI_HB8_MODE_ADMUX must not be specified. \b EPI_HB8_CSCFG_ALE sets
-//! EPI30 to operate as an address latch (ALE). \b EPI_HB8_CSCFG_DUAL_CS sets
-//! EPI30 to operate as CS0n and EPI27 as CS1n with the asserted chip select
-//! determined from the most significant address bit for the respective external
-//! address map. \b EPI_HB8_CSCFG_DUAL_ALE sets EPI30 as an address latch (ALE),
-//! EPI27 as CS0n and EPI26 as CS1n with the asserted chip select determined
-//! from the most significant address bit for the respective external address
-//! map.
+//! \b EPI_HB8_CSCFG_DUAL_CS or \b EPI_HB8_CSCFG_ALE_DUAL_CS.
+//! \b EPI_HB8_CSCFG_CS sets EPI30 to operate as a Chip Select (CSn) signal.
+//! \b EPI_HB8_CSCFG_ALE sets EPI30 to operate as an address latch (ALE).
+//! \b EPI_HB8_CSCFG_DUAL_CS sets EPI30 to operate as CS0n and EPI27 as CS1n
+//! with the asserted chip select determined from the most significant address
+//! bit for the respective external address map.  \b EPI_HB8_CSCFG_ALE_DUAL_CS
+//! sets EPI30 as an address latch (ALE), EPI27 as CS0n and EPI26 as CS1n with
+//! the asserted chip select determined from the most significant address bit
+//! for the respective external address map.
 //!
 //! The parameter \e ulMaxWait is used if the FIFO mode is chosen.  If a
 //! FIFO is used along with RXFULL or TXEMPTY ready signals, then this
@@ -248,7 +249,9 @@ EPIConfigHB8Set(unsigned long ulBase, unsigned long ulConfig,
     //
     HWREG(ulBase + EPI_O_HB8CFG2) = (((ulConfig & EPI_HB8_WORD_ACCESS) ?
                                        EPI_HB8CFG2_WORD : 0) |
-                                     ((ulConfig & EPI_HB8_CSBAUD_DUAL) ?                                       EPI_HB8CFG2_CSBAUD : 0) |                                      ((ulConfig & EPI_HB8_CSCFG_MASK) << 15));
+                                     ((ulConfig & EPI_HB8_CSBAUD_DUAL) ?
+                                       EPI_HB8CFG2_CSBAUD : 0) |
+                                      ((ulConfig & EPI_HB8_CSCFG_MASK) << 15));
     //
     // Fill in the max wait field of the configuration word.
     //
@@ -261,6 +264,96 @@ EPIConfigHB8Set(unsigned long ulBase, unsigned long ulConfig,
     HWREG(ulBase + EPI_O_HB8CFG)  = ulConfig;
 }
 
+//*****************************************************************************
+//
+//! Configures the interface for Host-bus 16 operation.
+//!
+//! \param ulBase is the EPI module base address.
+//! \param ulConfig is the interface configuration.
+//! \param ulMaxWait is the maximum number of external clocks to wait
+//! if a FIFO ready signal is holding off the transaction.
+//!
+//! This function is used to configure the interface when used in Host-bus 16
+//! operation as chosen with the function EPIModeSet().  The parameter
+//! \e ulConfig is the logical OR of any of the following:
+//!
+//! - one of \b EPI_HB16_MODE_ADMUX, \b EPI_HB16_MODE_ADDEMUX,
+//! \b EPI_HB16_MODE_SRAM, or \b EPI_HB16_MODE_FIFO to select the HB16 mode
+//! - \b EPI_HB16_USE_TXEMPTY - enable TXEMPTY signal with FIFO
+//! - \b EPI_HB16_USE_RXFULL - enable RXFULL signal with FIFO
+//! - \b EPI_HB16_WRHIGH - use active high write strobe, otherwise it is
+//! active low
+//! - \b EPI_HB16_RDHIGH - use active high read strobe, otherwise it is
+//! active low
+//! - one of \b EPI_HB16_WRWAIT_0, \b EPI_HB16_WRWAIT_1, \b EPI_HB16_WRWAIT_2,
+//! or \b EPI_HB16_WRWAIT_3 to select the number of write wait states (default
+//! is 0 wait states)
+//! - one of \b EPI_HB16_RDWAIT_0, \b EPI_HB16_RDWAIT_1, \b EPI_HB16_RDWAIT_2,
+//! or \b EPI_HB16_RDWAIT_3 to select the number of read wait states (default
+//! is 0 wait states)
+//! - \b EPI_HB16_WORD_ACCESS - use Word Access mode to route bytes to the
+//! correct byte lanes allowing data to be stored in bits [31:16].  If absent,
+//! all data transfers use bits [15:0].
+//! - \b EPI_HB16_BSEL - enables byte selects.  In this mode, two EPI signals
+//! operate as byte selects allowing 8-bit transfers.  If this flag is not
+//! specified, data must be read and written using only 16-bit transfers.
+//! - \b EPI_HB16_CSBAUD_DUAL - use different baud rates when accessing devices
+//! on each CSn. CS0n uses the baud rate specified by the lower 16 bits of the
+//! divider passed to EPIDividerSet() and CS1n uses the divider passed in the
+//! upper 16 bits.  If this option is absent, both chip selects use the baud
+//! rate resulting from the divider in the lower 16 bits of the parameter passed
+//! to EPIDividerSet().
+//! - one of \b EPI_HB16_CSCFG_CS, \b EPI_HB16_CSCFG_ALE,
+//! \b EPI_HB16_CSCFG_DUAL_CS or \b EPI_HB16_CSCFG_ALE_DUAL_CS.
+//! \b EPI_HB16_CSCFG_CS sets EPI30 to operate as a Chip Select (CSn) signal.
+//! \b EPI_HB16_CSCFG_ALE sets EPI30 to operate as an address latch (ALE).
+//! \b EPI_HB16_CSCFG_DUAL_CS sets EPI30 to operate as CS0n and EPI27 as CS1n
+//! with the asserted chip select determined from the most significant address
+//! bit for the respective external address map.  \b EPI_HB16_CSCFG_ALE_DUAL_CS
+//! sets EPI30 as an address latch (ALE), EPI27 as CS0n and EPI26 as CS1n with
+//! the asserted chip select determined from the most significant address bit
+//! for the respective external address map.
+//!
+//! The parameter \e ulMaxWait is used if the FIFO mode is chosen.  If a
+//! FIFO is used along with RXFULL or TXEMPTY ready signals, then this
+//! parameter determines the maximum number of clocks to wait when the
+//! transaction is being held off by by the FIFO using one of these ready
+//! signals.  A value of 0 means to wait forever.
+//!
+//! \return None.
+//
+//*****************************************************************************
+void
+EPIConfigHB16Set(unsigned long ulBase, unsigned long ulConfig,
+                unsigned long ulMaxWait)
+{
+    //
+    // Check the arguments.
+    //
+    ASSERT(ulBase == EPI0_BASE);
+    ASSERT(ulMaxWait < 256);
+
+    //
+    // Determine the CS and word access modes.
+    //
+    HWREG(ulBase + EPI_O_HB16CFG2) = (((ulConfig & EPI_HB16_WORD_ACCESS) ?
+                                       EPI_HB16CFG2_WORD : 0) |
+                                     ((ulConfig & EPI_HB16_CSBAUD_DUAL) ?
+                                       EPI_HB16CFG2_CSBAUD : 0) |
+                                      ((ulConfig & EPI_HB16_CSCFG_MASK) << 15));
+
+    //
+    // Fill in the max wait field of the configuration word.
+    //
+    ulConfig &= ~EPI_HB16CFG_MAXWAIT_M;
+    ulConfig |= ulMaxWait << EPI_HB16CFG_MAXWAIT_S;
+
+    //
+    // Write the main HostBus16 configuration register.
+    //
+    HWREG(ulBase + EPI_O_HB16CFG)  = ulConfig;
+}
+
 //*****************************************************************************
 //
 //! Configures the interface for general-purpose mode operation.
@@ -274,9 +367,8 @@ EPIConfigHB8Set(unsigned long ulBase, unsigned long ulConfig,
 //!
 //! This function is used to configure the interface when used in
 //! general-purpose operation as chosen with the function EPIModeSet().  The
-//! parameter
-//! \e ulConfig is the logical OR of any of the following:
-//!
+//! parameter \e ulConfig is the logical OR of any of the following:
+//! 
 //! - \b EPI_GPMODE_CLKPIN - interface clock is output on a pin
 //! - \b EPI_GPMODE_CLKGATE - clock is stopped when there is no transaction,
 //! otherwise it is free-running
@@ -288,13 +380,13 @@ EPIConfigHB8Set(unsigned long ulBase, unsigned long ulConfig,
 //! - \b EPI_GPMODE_FRAME50 - framing signal is 50/50 duty cycle, otherwise it
 //! is a pulse
 //! - \b EPI_GPMODE_READWRITE - read and write strobes are emitted on pins
-//! - \b EPI_GPMODE_WRITE2CYCLE - a two cycle write is used, otherwise a
+//! - \b EPI_GPMODE_WRITE2CYCLE - a two-cycle write is used, otherwise a
 //! single-cycle write is used
-//! - \b EPI_GPMODE_READ2CYCLE - a two cycle read is used, otherwise a
+//! - \b EPI_GPMODE_READ2CYCLE - a two-cycle read is used, otherwise a
 //! single-cycle read is used
 //! - \b EPI_GPMODE_ASIZE_NONE, \b EPI_GPMODE_ASIZE_4,
 //! \b EPI_GPMODE_ASIZE_12, or \b EPI_GPMODE_ASIZE_20 to choose no address
-//! bus, or and address bus size of 4, 12, or 20 bits
+//! bus or an address bus size of 4, 12, or 20 bits
 //! - \b EPI_GPMODE_DSIZE_8, \b EPI_GPMODE_DSIZE_16,
 //! \b EPI_GPMODE_DSIZE_24, or \b EPI_GPMODE_DSIZE_32 to select a data bus
 //! size of 8, 16, 24, or 32 bits
@@ -313,7 +405,7 @@ EPIConfigHB8Set(unsigned long ulBase, unsigned long ulConfig,
 //! external clock enable is used, this parameter determines the maximum
 //! number of clocks to wait when the external clock enable signal is holding
 //! off a transaction.  A value of 0 means to wait forever.  If a non-zero
-//! value is used and exceeded, an interrupt will occur and the transaction
+//! value is used and exceeded, an interrupt occurs and the transaction
 //! aborted.
 //!
 //! \return None.
@@ -422,7 +514,7 @@ EPIAddressMapSet(unsigned long ulBase, unsigned long ulMap)
 //! Once configured, the non-blocking read is started by calling
 //! EPINonBlockingReadStart().  If the addresses to be read from the device
 //! are in a sequence, it is not necessary to call this function multiple
-//! times.  Until it is changed, the EPI module will remember the last address
+//! times.  Until it is changed, the EPI module stores the last address
 //! that was used for a non-blocking read (per channel).
 //!
 //! \return None.
@@ -468,9 +560,9 @@ EPINonBlockingReadConfigure(unsigned long ulBase, unsigned long ulChannel,
 //!
 //! This function starts a non-blocking read that was previously configured
 //! with the function EPINonBlockingReadConfigure().  Once this function is
-//! called, the EPI module will begin reading data from the external device
-//! into the read FIFO.  The EPI will stop reading when the FIFO fills up
-//! and resume reading when the application drains the FIFO, until the
+//! called, the EPI module begins reading data from the external device
+//! into the read FIFO.  The EPI stops reading when the FIFO fills up
+//! and resumes reading when the application drains the FIFO, until the
 //! total specified count of data items has been read.
 //!
 //! Once a read transaction is completed and the FIFO drained, another
@@ -534,7 +626,7 @@ EPINonBlockingReadStop(unsigned long ulBase, unsigned long ulChannel)
     ulOffset = ulChannel * (EPI_O_RPSTD1 - EPI_O_RPSTD0);
 
     //
-    // Write a 0 to the read count register, which will cancel the transaction.
+    // Write a 0 to the read count register, which cancels the transaction.
     //
     HWREG(ulBase + EPI_O_RPSTD0 + ulOffset) = 0;
 }
@@ -612,10 +704,10 @@ EPINonBlockingReadAvail(unsigned long ulBase)
 //! be stored.
 //!
 //! This function reads 32-bit data items from the read FIFO and stores
-//! the values in a caller supplied buffer.  The function will read and store
+//! the values in a caller-supplied buffer.  The function reads and stores
 //! data from the FIFO until there is no more data in the FIFO or the maximum
 //! count is reached as specified in the parameter \e ulCount.  The actual
-//! count of items will be returned.
+//! count of items is returned.
 //!
 //! \return The number of items read from the FIFO.
 //
@@ -634,8 +726,8 @@ EPINonBlockingReadGet32(unsigned long ulBase, unsigned long ulCount,
     ASSERT(pulBuf);
 
     //
-    // Read from the FIFO while there are any items to read, and
-    // the callers specified count is not exceeded.
+    // Read from the FIFO while there are any items to read and
+    // the caller's specified count is not exceeded.
     //
     while(HWREG(ulBase + EPI_O_RFIFOCNT) && ulCount--)
     {
@@ -663,14 +755,14 @@ EPINonBlockingReadGet32(unsigned long ulBase, unsigned long ulCount,
 //!
 //! \param ulBase is the EPI module base address.
 //! \param ulCount is the maximum count of items to read.
-//! \param pusBuf is the caller supplied buffer where the read data should
+//! \param pusBuf is the caller-supplied buffer where the read data should
 //! be stored.
 //!
 //! This function reads 16-bit data items from the read FIFO and stores
-//! the values in a caller supplied buffer.  The function will read and store
+//! the values in a caller-supplied buffer.  The function reads and stores
 //! data from the FIFO until there is no more data in the FIFO or the maximum
 //! count is reached as specified in the parameter \e ulCount.  The actual
-//! count of items will be returned.
+//! count of items is returned.
 //!
 //! \return The number of items read from the FIFO.
 //
@@ -690,12 +782,12 @@ EPINonBlockingReadGet16(unsigned long ulBase, unsigned long ulCount,
 
     //
     // Read from the FIFO while there are any items to read, and
-    // the callers specified count is not exceeded.
+    // the caller's specified count is not exceeded.
     //
     while(HWREG(ulBase + EPI_O_RFIFOCNT) && ulCount--)
     {
         //
-        // Read from the FIFO and store in the caller supplied buffer.
+        // Read from the FIFO and store in the caller-supplied buffer.
         //
         *pusBuf = (unsigned short)HWREG(ulBase + EPI_O_READFIFO);
 
@@ -718,14 +810,14 @@ EPINonBlockingReadGet16(unsigned long ulBase, unsigned long ulCount,
 //!
 //! \param ulBase is the EPI module base address.
 //! \param ulCount is the maximum count of items to read.
-//! \param pucBuf is the caller supplied buffer where the read data should
+//! \param pucBuf is the caller-supplied buffer where the read data should
 //! be stored.
 //!
 //! This function reads 8-bit data items from the read FIFO and stores
-//! the values in a caller supplied buffer.  The function will read and store
+//! the values in a caller-supplied buffer.  The function reads and stores
 //! data from the FIFO until there is no more data in the FIFO or the maximum
 //! count is reached as specified in the parameter \e ulCount.  The actual
-//! count of items will be returned.
+//! count of items is returned.
 //!
 //! \return The number of items read from the FIFO.
 //
@@ -745,7 +837,7 @@ EPINonBlockingReadGet8(unsigned long ulBase, unsigned long ulCount,
 
     //
     // Read from the FIFO while there are any items to read, and
-    // the callers specified count is not exceeded.
+    // the caller's specified count is not exceeded.
     //
     while(HWREG(ulBase + EPI_O_RFIFOCNT) && ulCount--)
     {
@@ -1047,7 +1139,7 @@ EPIIntRegister(unsigned long ulBase, void (*pfnHandler)(void))
 //!
 //! \param ulBase is the EPI module base address.
 //!
-//! This function will disable and clear the handler to be called when the
+//! This function disables and clears the handler to be called when the
 //! EPI interrupt occurs.
 //!
 //! \sa IntRegister() for important information about registering interrupt

bsp/lm3s9b9x/Libraries/driverlib/epi.h

@@ -2,7 +2,7 @@
 //
 // epi.h - Prototypes and macros for the EPI module.
 //
-// Copyright (c) 2008-2010 Texas Instruments Incorporated.  All rights reserved.
+// Copyright (c) 2008-2011 Texas Instruments Incorporated.  All rights reserved.
 // Software License Agreement
 // 
 // Texas Instruments (TI) is supplying this software for use solely and
@@ -18,7 +18,7 @@
 // CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
 // DAMAGES, FOR ANY REASON WHATSOEVER.
 // 
-// This is part of revision 6459 of the Stellaris Peripheral Driver Library.
+// This is part of revision 8264 of the Stellaris Peripheral Driver Library.
 //
 //*****************************************************************************
 
@@ -44,6 +44,7 @@ extern "C"
 #define EPI_MODE_GENERAL                0x00000010
 #define EPI_MODE_SDRAM                  0x00000011
 #define EPI_MODE_HB8                    0x00000012
+#define EPI_MODE_HB16                   0x00000013
 #define EPI_MODE_DISABLE                0x00000000
 
 //*****************************************************************************
@@ -115,6 +116,37 @@ extern "C"
 
 #define EPI_HB8_CSCFG_MASK              0x00000600
 
+//*****************************************************************************
+//
+// Values that can be passed to EPIConfigHB16ModeSet()
+//
+//*****************************************************************************
+#define EPI_HB16_USE_TXEMPTY            0x00800000
+#define EPI_HB16_USE_RXFULL             0x00400000
+#define EPI_HB16_WRHIGH                 0x00200000
+#define EPI_HB16_RDHIGH                 0x00100000
+#define EPI_HB16_WRWAIT_0               0x00000000
+#define EPI_HB16_WRWAIT_1               0x00000040
+#define EPI_HB16_WRWAIT_2               0x00000080
+#define EPI_HB16_WRWAIT_3               0x000000C0
+#define EPI_HB16_RDWAIT_0               0x00000000
+#define EPI_HB16_RDWAIT_1               0x00000010
+#define EPI_HB16_RDWAIT_2               0x00000020
+#define EPI_HB16_RDWAIT_3               0x00000030
+#define EPI_HB16_MODE_ADMUX             0x00000000
+#define EPI_HB16_MODE_ADDEMUX           0x00000001
+#define EPI_HB16_MODE_SRAM              0x00000002
+#define EPI_HB16_MODE_FIFO              0x00000003
+#define EPI_HB16_BSEL                   0x00000004
+#define EPI_HB16_WORD_ACCESS            0x00000100
+#define EPI_HB16_CSCFG_ALE              0x00000000
+#define EPI_HB16_CSCFG_CS               0x00000200
+#define EPI_HB16_CSCFG_DUAL_CS          0x00000400
+#define EPI_HB16_CSCFG_ALE_DUAL_CS      0x00000600
+#define EPI_HB16_CSBAUD_DUAL            0x00000800
+
+#define EPI_HB16_CSCFG_MASK             0x00000600
+
 //*****************************************************************************
 //
 // Values that can be passed to EPIConfigSDRAMSet()
@@ -196,6 +228,8 @@ extern void EPIConfigGPModeSet(unsigned long ulBase, unsigned long ulConfig,
                                unsigned long ulMaxWait);
 extern void EPIConfigHB8Set(unsigned long ulBase, unsigned long ulConfig,
                             unsigned long ulMaxWait);
+extern void EPIConfigHB16Set(unsigned long ulBase, unsigned long ulConfig,
+                             unsigned long ulMaxWait);
 extern void EPIAddressMapSet(unsigned long ulBase, unsigned long ulMap);
 extern void EPINonBlockingReadConfigure(unsigned long ulBase,
                                         unsigned long ulChannel,

bsp/lm3s9b9x/Libraries/driverlib/ethernet.h

@@ -2,7 +2,7 @@
 //
 // ethernet.h - Defines and Macros for the ethernet module.
 //
-// Copyright (c) 2006-2010 Texas Instruments Incorporated.  All rights reserved.
+// Copyright (c) 2006-2011 Texas Instruments Incorporated.  All rights reserved.
 // Software License Agreement
 // 
 // Texas Instruments (TI) is supplying this software for use solely and
@@ -18,7 +18,7 @@
 // CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
 // DAMAGES, FOR ANY REASON WHATSOEVER.
 // 
-// This is part of revision 6459 of the Stellaris Peripheral Driver Library.
+// This is part of revision 8264 of the Stellaris Peripheral Driver Library.
 //
 //*****************************************************************************
 
@@ -136,10 +136,13 @@ extern void EthernetIntEnable(unsigned long ulBase, unsigned long ulIntFlags);
 extern void EthernetIntDisable(unsigned long ulBase, unsigned long ulIntFlags);
 extern unsigned long EthernetIntStatus(unsigned long ulBase, tBoolean bMasked);
 extern void EthernetIntClear(unsigned long ulBase, unsigned long ulIntFlags);
+extern void EthernetPHYAddrSet(unsigned long ulBase, unsigned char ucAddr);
 extern void EthernetPHYWrite(unsigned long ulBase, unsigned char ucRegAddr,
                              unsigned long ulData);
 extern unsigned long EthernetPHYRead(unsigned long ulBase,
                                      unsigned char ucRegAddr);
+extern void EthernetPHYPowerOff(unsigned long ulBase);
+extern void EthernetPHYPowerOn(unsigned long ulBase);
 
 //*****************************************************************************
 //

bsp/lm3s9b9x/Libraries/driverlib/fan.h

+//*****************************************************************************
+//
+// fan.h - Prototypes and macros for the Fan controller.
+//
+// Copyright (c) 2010-2011 Texas Instruments Incorporated.  All rights reserved.
+// Software License Agreement
+// 
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+// 
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+// 
+// This is part of revision 8264 of the Stellaris Peripheral Driver Library.
+//
+//*****************************************************************************
+
+#ifndef __FAN_H__
+#define __FAN_H__
+
+//*****************************************************************************
+//
+// If building with a C++ compiler, make all of the definitions in this header
+// have a C binding.
+//
+//*****************************************************************************
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+//*****************************************************************************
+//
+// Fan status values that can be returned from the FanChannelStatus() function.
+//
+//*****************************************************************************
+#define FAN_STATUS_STALLED          0
+#define FAN_STATUS_CHANGING         1
+#define FAN_STATUS_LOCKED           2
+#define FAN_STATUS_NOATTAIN         3
+
+//*****************************************************************************
+//
+// Configuration flags to be used with FanChannelConfigManual() and
+// FanChannelConfigAuto().
+//
+//*****************************************************************************
+#define FAN_CONFIG_RESTART          (1 << 15)
+#define FAN_CONFIG_NORESTART        (0 << 15)
+#define FAN_CONFIG_ACCEL_FAST       (1 << 14)
+#define FAN_CONFIG_ACCEL_SLOW       (0 << 14)
+#define FAN_CONFIG_HYST_1           (0 << 11)
+#define FAN_CONFIG_HYST_2           (1 << 11)
+#define FAN_CONFIG_HYST_4           (2 << 11)
+#define FAN_CONFIG_HYST_8           (3 << 11)
+#define FAN_CONFIG_HYST_16          (4 << 11)
+#define FAN_CONFIG_HYST_32          (5 << 11)
+#define FAN_CONFIG_HYST_64          (6 << 11)
+#define FAN_CONFIG_HYST_128         (7 << 11)
+#define FAN_CONFIG_START_2          (0 << 8)
+#define FAN_CONFIG_START_4          (1 << 8)
+#define FAN_CONFIG_START_8          (2 << 8)
+#define FAN_CONFIG_START_16         (3 << 8)
+#define FAN_CONFIG_START_32         (4 << 8)
+#define FAN_CONFIG_START_64         (5 << 8)
+#define FAN_CONFIG_START_128        (6 << 8)
+#define FAN_CONFIG_START_256        (7 << 8)
+#define FAN_CONFIG_START_DUTY_OFF   (0 << 6)
+#define FAN_CONFIG_START_DUTY_50    (1 << 6)
+#define FAN_CONFIG_START_DUTY_75    (2 << 6)
+#define FAN_CONFIG_START_DUTY_100   (3 << 6)
+#define FAN_CONFIG_AVG_NONE         (0 << 4)
+#define FAN_CONFIG_AVG_2            (1 << 4)
+#define FAN_CONFIG_AVG_4            (2 << 4)
+#define FAN_CONFIG_AVG_8            (3 << 4)
+#define FAN_CONFIG_TACH_1           (0 << 2)
+#define FAN_CONFIG_TACH_2           (1 << 2)
+#define FAN_CONFIG_TACH_4           (2 << 2)
+#define FAN_CONFIG_TACH_8           (3 << 2)
+
+//*****************************************************************************
+//
+// Interrupt configuration/status flags to be used with the following
+// functions: FanIntEnable(), FanIntDisable(), FanIntStatus(), FanIntClear().
+//
+//*****************************************************************************
+#define FAN_CH5_INT_AUTO_SPEED_OK       (1 << 22)
+#define FAN_CH5_INT_MANUAL_SPEED_CHANGE (1 << 22)
+#define FAN_CH5_INT_AUTO_SPEED_ERROR    (1 << 21)
+#define FAN_CH5_INT_MANUAL_SPEED_UPDATE (1 << 21)
+#define FAN_CH5_INT_STALL               (1 << 20)
+#define FAN_CH4_INT_AUTO_SPEED_OK       (1 << 18)
+#define FAN_CH4_INT_MANUAL_SPEED_CHANGE (1 << 18)
+#define FAN_CH4_INT_AUTO_SPEED_ERROR    (1 << 17)
+#define FAN_CH4_INT_MANUAL_SPEED_UPDATE (1 << 17)
+#define FAN_CH4_INT_STALL               (1 << 16)
+#define FAN_CH3_INT_AUTO_SPEED_OK       (1 << 14)
+#define FAN_CH3_INT_MANUAL_SPEED_CHANGE (1 << 14)
+#define FAN_CH3_INT_AUTO_SPEED_ERROR    (1 << 13)
+#define FAN_CH3_INT_MANUAL_SPEED_UPDATE (1 << 13)
+#define FAN_CH3_INT_STALL               (1 << 12)
+#define FAN_CH2_INT_AUTO_SPEED_OK       (1 << 10)
+#define FAN_CH2_INT_MANUAL_SPEED_CHANGE (1 << 10)
+#define FAN_CH2_INT_AUTO_SPEED_ERROR    (1 << 9)
+#define FAN_CH2_INT_MANUAL_SPEED_UPDATE (1 << 9)
+#define FAN_CH2_INT_STALL               (1 << 8)
+#define FAN_CH1_INT_AUTO_SPEED_OK       (1 << 6)
+#define FAN_CH1_INT_MANUAL_SPEED_CHANGE (1 << 6)
+#define FAN_CH1_INT_AUTO_SPEED_ERROR    (1 << 5)
+#define FAN_CH1_INT_MANUAL_SPEED_UPDATE (1 << 5)
+#define FAN_CH1_INT_STALL               (1 << 4)
+#define FAN_CH0_INT_AUTO_SPEED_OK       (1 << 2)
+#define FAN_CH0_INT_MANUAL_SPEED_CHANGE (1 << 2)
+#define FAN_CH0_INT_AUTO_SPEED_ERROR    (1 << 1)
+#define FAN_CH0_INT_MANUAL_SPEED_UPDATE (1 << 1)
+#define FAN_CH0_INT_STALL               (1 << 0)
+#define FAN_CHx_INT_AUTO_SPEED_OK(x)        (1 << (((x) * 4) + 2))
+#define FAN_CHx_INT_MANUAL_SPEED_CHANGE(x)  (1 << (((x) * 4) + 2))
+#define FAN_CHx_INT_AUTO_SPEED_ERROR(x)     (1 << (((x) * 4) + 1))
+#define FAN_CHx_INT_MANUAL_SPEED_UPDATE(x)  (1 << (((x) * 4) + 1))
+#define FAN_CHx_INT_STALL(x)                (1 << ((x) * 4))
+
+//*****************************************************************************
+//
+// API Function prototypes
+//
+//*****************************************************************************
+extern void FanChannelEnable(unsigned long ulBase, unsigned long ulChannel);
+extern void FanChannelDisable(unsigned long ulBase, unsigned long ulChannel);
+extern unsigned long FanChannelStatus(unsigned long ulBase,
+                                      unsigned long ulChannel);
+extern void FanChannelConfigManual(unsigned long ulBase, unsigned long ulChannel,
+                                   unsigned long ulConfig);
+extern void FanChannelConfigAuto(unsigned long ulBase, unsigned long ulChannel,
+                                 unsigned long ulConfig);
+extern void FanChannelDutySet(unsigned long ulBase, unsigned long ulChannel,
+                              unsigned long ulDuty);
+extern unsigned long FanChannelDutyGet(unsigned long ulBase,
+                                       unsigned long ulChannel);
+extern void FanChannelRPMSet(unsigned long ulBase, unsigned long ulChannel,
+                             unsigned long ulRPM);
+extern unsigned long FanChannelRPMGet(unsigned long ulBase,
+                                      unsigned long ulChannel);
+extern void FanIntEnable(unsigned long ulBase, unsigned long ulFlags);
+extern void FanIntDisable(unsigned long ulBase, unsigned long ulFlags);
+extern unsigned long FanIntStatus(unsigned long ulBase, tBoolean bMasked);
+extern void FanIntClear(unsigned long ulBase, unsigned long ulFlags);
+extern void FanIntRegister(unsigned long ulBase, void (*pfnHandler)(void));
+extern void FanIntUnregister(unsigned long ulBase);
+extern unsigned long FanChannelsGet(unsigned long ulBase);
+
+//*****************************************************************************
+//
+// Mark the end of the C bindings section for C++ compilers.
+//
+//*****************************************************************************
+#ifdef __cplusplus
+}
+#endif
+
+#endif //  __FAN_H__

bsp/lm3s9b9x/Libraries/driverlib/flash.h

@@ -2,7 +2,7 @@
 //
 // flash.h - Prototypes for the flash driver.
 //
-// Copyright (c) 2005-2010 Texas Instruments Incorporated.  All rights reserved.
+// Copyright (c) 2005-2011 Texas Instruments Incorporated.  All rights reserved.
 // Software License Agreement
 // 
 // Texas Instruments (TI) is supplying this software for use solely and
@@ -18,7 +18,7 @@
 // CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
 // DAMAGES, FOR ANY REASON WHATSOEVER.
 // 
-// This is part of revision 6459 of the Stellaris Peripheral Driver Library.
+// This is part of revision 8264 of the Stellaris Peripheral Driver Library.
 //
 //*****************************************************************************
 
@@ -56,8 +56,13 @@ tFlashProtection;
 // returned from FlashIntStatus().
 //
 //*****************************************************************************
-#define FLASH_INT_PROGRAM       0x00000002  // Programming Interrupt Mask
-#define FLASH_INT_ACCESS        0x00000001  // Access Interrupt Mask
+#define FLASH_INT_PROGRAM     0x00000002 // Programming Interrupt Mask
+#define FLASH_INT_ACCESS      0x00000001 // Access Interrupt Mask
+#define FLASH_INT_EEPROM      0x00000004 // EEPROM Interrupt Mask
+#define FLASH_INT_VOLTAGE_ERR 0x00000200 // Voltage Error Interrupt Mask
+#define FLASH_INT_DATA_ERR    0x00000400 // Invalid Data Interrupt Mask
+#define FLASH_INT_ERASE_ERR   0x00000800 // Erase Error Interrupt Mask
+#define FLASH_INT_PROGRAM_ERR 0x00002000 // Program Verify Error Interrupt Mask
 
 //*****************************************************************************
 //

bsp/lm3s9b9x/Libraries/driverlib/i2s.h

@@ -2,7 +2,7 @@
 //
 // i2s.h - Prototypes and macros for the I2S controller.
 //
-// Copyright (c) 2008-2010 Texas Instruments Incorporated.  All rights reserved.
+// Copyright (c) 2008-2011 Texas Instruments Incorporated.  All rights reserved.
 // Software License Agreement
 // 
 // Texas Instruments (TI) is supplying this software for use solely and
@@ -18,7 +18,7 @@
 // CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
 // DAMAGES, FOR ANY REASON WHATSOEVER.
 // 
-// This is part of revision 6459 of the Stellaris Peripheral Driver Library.
+// This is part of revision 8264 of the Stellaris Peripheral Driver Library.
 //
 //*****************************************************************************