Update esp32-camera driver

tools/sdk/include/config/sdkconfig.h

@@ -4,9 +4,6 @@
  * Espressif IoT Development Framework Configuration
  *
  */
-#define CONFIG_ARDUINO_RUNNING_CORE 1
-#define CONFIG_ARDUINO_EVENT_RUNNING_CORE 1
-#define CONFIG_ARDUINO_UDP_RUNNING_CORE 1
 #define CONFIG_GATTC_ENABLE 1
 #define CONFIG_ESP32_PHY_MAX_TX_POWER 20
 #define CONFIG_TRACEMEM_RESERVE_DRAM 0x0
@@ -103,6 +100,7 @@
 #define CONFIG_MBEDTLS_RC4_DISABLED 1
 #define CONFIG_FATFS_LFN_STACK 1
 #define CONFIG_CONSOLE_UART_NUM 0
+#define CONFIG_ARDUINO_EVENT_RUNNING_CORE 1
 #define CONFIG_ESP32_APPTRACE_LOCK_ENABLE 1
 #define CONFIG_PTHREAD_STACK_MIN 768
 #define CONFIG_ESP32_RTC_CLOCK_SOURCE_INTERNAL_RC 1
@@ -114,6 +112,7 @@
 #define CONFIG_NUMBER_OF_UNIVERSAL_MAC_ADDRESS 4
 #define CONFIG_ESPTOOLPY_FLASHSIZE_DETECT 1
 #define CONFIG_AUTOSTART_ARDUINO 1
+#define CONFIG_ARDUINO_RUNNING_CORE 1
 #define CONFIG_PPP_CHAP_SUPPORT 1
 #define CONFIG_LOG_DEFAULT_LEVEL_ERROR 1
 #define CONFIG_TIMER_TASK_STACK_SIZE 4096
@@ -137,6 +136,7 @@
 #define CONFIG_TASK_WDT_TIMEOUT_S 5
 #define CONFIG_INT_WDT_TIMEOUT_MS 300
 #define CONFIG_SCCB_HARDWARE_I2C 1
+#define CONFIG_ARDUINO_EVENT_RUN_CORE1 1
 #define CONFIG_ESPTOOLPY_FLASHMODE "dio"
 #define CONFIG_BTC_TASK_STACK_SIZE 8192
 #define CONFIG_BLUEDROID_ENABLED 1
@@ -214,6 +214,7 @@
 #define CONFIG_BROWNOUT_DET_LVL 0
 #define CONFIG_MBEDTLS_PEM_PARSE_C 1
 #define CONFIG_SPIFFS_GC_MAX_RUNS 10
+#define CONFIG_ARDUINO_RUN_CORE1 1
 #define CONFIG_ESP32_APPTRACE_DEST_NONE 1
 #define CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC 1
 #define CONFIG_MBEDTLS_SSL_PROTO_TLS1_2 1
@@ -261,6 +262,7 @@
 #define CONFIG_ESPTOOLPY_AFTER "hard_reset"
 #define CONFIG_TCPIP_TASK_AFFINITY 0x0
 #define CONFIG_LWIP_SO_REUSE 1
+#define CONFIG_ARDUINO_UDP_RUN_CORE1 1
 #define CONFIG_DMA_TX_BUF_NUM 10
 #define CONFIG_LWIP_MAX_LISTENING_TCP 16
 #define CONFIG_FREERTOS_INTERRUPT_BACKTRACE 1
@@ -328,6 +330,7 @@
 #define CONFIG_LWIP_SO_RCVBUF 1
 #define CONFIG_MB_TIMER_PORT_ENABLED 1
 #define CONFIG_DUPLICATE_SCAN_CACHE_SIZE 20
+#define CONFIG_ARDUINO_UDP_RUNNING_CORE 1
 #define CONFIG_MONITOR_BAUD_OTHER_VAL 115200
 #define CONFIG_NEWLIB_STDOUT_LINE_ENDING_CRLF 1
 #define CONFIG_ESPTOOLPY_PORT "/dev/cu.usbserial-DO00EAB0"

tools/sdk/sdkconfig

@@ -15,6 +15,18 @@ CONFIG_MAKE_WARN_UNDEFINED_VARIABLES=y
 #
 CONFIG_ENABLE_ARDUINO_DEPENDS=y
 CONFIG_AUTOSTART_ARDUINO=y
+CONFIG_ARDUINO_RUN_CORE0=
+CONFIG_ARDUINO_RUN_CORE1=y
+CONFIG_ARDUINO_RUN_NO_AFFINITY=
+CONFIG_ARDUINO_RUNNING_CORE=1
+CONFIG_ARDUINO_EVENT_RUN_CORE0=
+CONFIG_ARDUINO_EVENT_RUN_CORE1=y
+CONFIG_ARDUINO_EVENT_RUN_NO_AFFINITY=
+CONFIG_ARDUINO_EVENT_RUNNING_CORE=1
+CONFIG_ARDUINO_UDP_RUN_CORE0=
+CONFIG_ARDUINO_UDP_RUN_CORE1=y
+CONFIG_ARDUINO_UDP_RUN_NO_AFFINITY=
+CONFIG_ARDUINO_UDP_RUNNING_CORE=1
 CONFIG_DISABLE_HAL_LOCKS=
 
 #