Board T-Beam: Update pins_arduino.h (#2380)

* Board T-Beam: Update pins_arduino.h

DAC2 is not wired, only DAC1 is -> corrected
LORA pins 27 + 19 are only wired on pcb, but not connected to header -> deleted

* Update pins_arduino.h

Button and LED added

variants/t-beam/pins_arduino.h

@@ -19,8 +19,13 @@
 #define LORA_RST 23     // GPIO23 - SX1276 RST
 #define LORA_IRQ 26     // GPIO26 - SX1276 IO0
 #define LORA_IO0 LORA_IRQ  // alias
-#define LORA_IO1 33     // GPIO33 - SX1276 IO1
-#define LORA_IO2 32     // GPIO32 - SX1276 IO2
+#define LORA_IO1 33     // GPIO33 - SX1276 IO1 -> wired on pcb AND connected to header pin LORA1
+#define LORA_IO2 32     // GPIO32 - SX1276 IO2 -> wired on pcb AND connected to header pin LORA2
+
+static const uint8_t KEY_BUILTIN = 39;
+
+static const uint8_t LED_BUILTIN = 14;
+#define BUILTIN_LED  LED_BUILTIN // backward compatibility
 
 static const uint8_t TX = 1;
 static const uint8_t RX = 3;
@@ -45,9 +50,7 @@ static const uint8_t A11 = 0;
 static const uint8_t A12 = 2;
 static const uint8_t A14 = 13;
 static const uint8_t A16 = 14;
-static const uint8_t A17 = 27;  //lora
 static const uint8_t A18 = 25;
-static const uint8_t A19 = 26;  //lora
 
 static const uint8_t T0 = 4;
 static const uint8_t T1 = 0;
@@ -57,6 +60,6 @@ static const uint8_t T6 = 14;
 static const uint8_t T8 = 33;
 static const uint8_t T9 = 32;
 
-static const uint8_t DAC2 = 26;
+static const uint8_t DAC1 = 25;
 
 #endif /* Pins_Arduino_h */