Added #define LED_BUILTIN to all pins_arduino.h that need it. (#4520)

variants/Microduino-esp32/pins_arduino.h

@@ -13,6 +13,7 @@
 
 static const uint8_t LED_BUILTIN = -1;
 #define BUILTIN_LED  LED_BUILTIN // backward compatibility
+#define LED_BUILTIN LED_BUILTIN
 
 #define MTDO 15
 #define MTDI 12

variants/S_ODI_Ultra_v1/pins_arduino.h

@@ -14,6 +14,7 @@
 static const uint8_t LED_BUILTIN = 2;
 static const uint8_t LED_BUILTINB = 4;
 #define BUILTIN_LED  LED_BUILTIN // backward compatibility
+#define LED_BUILTIN LED_BUILTIN
 #define BUILTIN_LED2  LED_BUILTINB
 
 static const uint8_t TX = 1;

variants/alksesp32/pins_arduino.h

@@ -15,6 +15,7 @@
 
 static const uint8_t LED_BUILTIN = 23;
 #define BUILTIN_LED  LED_BUILTIN // backward compatibility
+#define LED_BUILTIN LED_BUILTIN
 
 static const uint8_t TX = 1;
 static const uint8_t RX = 3;

variants/d1_mini32/pins_arduino.h

@@ -6,6 +6,7 @@
 
 static const uint8_t LED_BUILTIN = 2;
 #define BUILTIN_LED  LED_BUILTIN // backward compatibility
+#define LED_BUILTIN LED_BUILTIN
 static const uint8_t _VBAT = 35; // battery voltage
 
 #define PIN_WIRE_SDA SDA // backward compatibility

variants/d32/pins_arduino.h

@@ -6,6 +6,7 @@
 
 static const uint8_t LED_BUILTIN = 5;
 #define BUILTIN_LED  LED_BUILTIN // backward compatibility
+#define LED_BUILTIN LED_BUILTIN
 static const uint8_t _VBAT = 35; // battery voltage
 
 #endif /* Pins_Arduino_h */

variants/d32_pro/pins_arduino.h

@@ -6,6 +6,7 @@
 
 static const uint8_t LED_BUILTIN = 5;
 #define BUILTIN_LED  LED_BUILTIN // backward compatibility
+#define LED_BUILTIN LED_BUILTIN
 static const uint8_t _VBAT = 35; // battery voltage
 
 

variants/doitESP32devkitV1/pins_arduino.h

@@ -13,6 +13,7 @@
 
 static const uint8_t LED_BUILTIN = 2;
 #define BUILTIN_LED  LED_BUILTIN // backward compatibility
+#define LED_BUILTIN LED_BUILTIN
 
 static const uint8_t TX = 1;
 static const uint8_t RX = 3;

variants/esp32-gateway/pins_arduino.h

@@ -18,6 +18,7 @@
 
 static const uint8_t LED_BUILTIN = 33;
 #define BUILTIN_LED  LED_BUILTIN // backward compatibility
+#define LED_BUILTIN LED_BUILTIN
 
 static const uint8_t KEY_BUILTIN = 34;
 

variants/esp320/pins_arduino.h

@@ -13,6 +13,7 @@
 
 static const uint8_t LED_BUILTIN = 5;
 #define BUILTIN_LED  LED_BUILTIN // backward compatibility
+#define LED_BUILTIN LED_BUILTIN
 
 static const uint8_t TX = 1;
 static const uint8_t RX = 3;

variants/esp32thing/pins_arduino.h

@@ -13,6 +13,7 @@
 
 static const uint8_t LED_BUILTIN = 5;
 #define BUILTIN_LED  LED_BUILTIN // backward compatibility
+#define LED_BUILTIN LED_BUILTIN
 
 static const uint8_t KEY_BUILTIN = 0;
 

variants/esp32thing_plus/pins_arduino.h

@@ -13,6 +13,7 @@
 
 static const uint8_t LED_BUILTIN = 13;
 #define BUILTIN_LED  LED_BUILTIN // backward compatibility
+#define LED_BUILTIN LED_BUILTIN
 
 static const uint8_t TX = 17;
 static const uint8_t RX = 16;

variants/espea32/pins_arduino.h

@@ -13,6 +13,7 @@
 
 static const uint8_t LED_BUILTIN = 5;
 #define BUILTIN_LED  LED_BUILTIN // backward compatibility
+#define LED_BUILTIN LED_BUILTIN
 
 static const uint8_t KEY_BUILTIN = 0;
 

variants/espectro32/pins_arduino.h

@@ -17,6 +17,7 @@
 
 static const uint8_t LED_BUILTIN = 15;
 #define BUILTIN_LED  LED_BUILTIN // backward compatibility
+#define LED_BUILTIN LED_BUILTIN
 
 static const uint8_t TX = 1;
 static const uint8_t RX = 3;

variants/espino32/pins_arduino.h

@@ -13,6 +13,7 @@
 
 static const uint8_t LED_BUILTIN = 16;
 #define BUILTIN_LED  LED_BUILTIN // backward compatibility
+#define LED_BUILTIN LED_BUILTIN
 
 static const uint8_t BUILTIN_KEY = 0;
 

variants/feather_esp32/pins_arduino.h

@@ -13,6 +13,7 @@
 
 static const uint8_t LED_BUILTIN = 13;
 #define BUILTIN_LED  LED_BUILTIN // backward compatibility
+#define LED_BUILTIN LED_BUILTIN
 
 static const uint8_t TX = 17;
 static const uint8_t RX = 16;

variants/firebeetle32/pins_arduino.h

@@ -15,6 +15,7 @@ typedef unsigned char uint8_t;
 
 static const uint8_t LED_BUILTIN = 2;
 #define BUILTIN_LED  LED_BUILTIN // backward compatibility
+#define LED_BUILTIN LED_BUILTIN
 
 
 

variants/gpy/pins_arduino.h

@@ -24,6 +24,7 @@
 
 static const uint8_t LED_BUILTIN = 0; // ->2812 RGB !!!
 #define BUILTIN_LED  LED_BUILTIN // backward compatibility
+#define LED_BUILTIN LED_BUILTIN
 
 #define ANT_SELECT 21   // GPIO21 - WiFi external / internal antenna switch
 

variants/healthypi4/pins_arduino.h

@@ -13,6 +13,7 @@
 
 static const uint8_t LED_BUILTIN = 15;
 #define BUILTIN_LED  LED_BUILTIN // backward compatibility
+#define LED_BUILTIN LED_BUILTIN
 
 static const uint8_t KEY_BUILTIN = 17;
 

variants/heltec_wifi_kit_32/pins_arduino.h

@@ -17,6 +17,7 @@
 
 static const uint8_t LED_BUILTIN = 25;
 #define BUILTIN_LED  LED_BUILTIN // backward compatibility
+#define LED_BUILTIN LED_BUILTIN
 
 static const uint8_t KEY_BUILTIN = 0;
 

variants/heltec_wifi_lora_32/pins_arduino.h

@@ -17,6 +17,7 @@
 
 static const uint8_t LED_BUILTIN = 25;
 #define BUILTIN_LED  LED_BUILTIN // backward compatibility
+#define LED_BUILTIN LED_BUILTIN
 
 static const uint8_t KEY_BUILTIN = 0;
 

variants/heltec_wifi_lora_32_V2/pins_arduino.h

@@ -17,6 +17,7 @@
 
 static const uint8_t LED_BUILTIN = 25;
 #define BUILTIN_LED  LED_BUILTIN // backward compatibility
+#define LED_BUILTIN LED_BUILTIN
 
 static const uint8_t KEY_BUILTIN = 0;
 

variants/heltec_wireless_stick/pins_arduino.h

@@ -17,6 +17,7 @@
 
 static const uint8_t LED_BUILTIN = 25;
 #define BUILTIN_LED  LED_BUILTIN // backward compatibility
+#define LED_BUILTIN LED_BUILTIN
 
 static const uint8_t KEY_BUILTIN = 0;
 

variants/honeylemon/pins_arduino.h

@@ -13,6 +13,7 @@
 
 static const uint8_t LED_BUILTIN = 2;
 #define BUILTIN_LED  LED_BUILTIN // backward compatibility
+#define LED_BUILTIN LED_BUILTIN
 
 static const uint8_t BUILTIN_KEY = 0;
 

variants/hornbill32dev/pins_arduino.h

@@ -13,6 +13,7 @@
 
 static const uint8_t LED_BUILTIN = 13;
 #define BUILTIN_LED  LED_BUILTIN // backward compatibility
+#define LED_BUILTIN LED_BUILTIN
 
 static const uint8_t KEY_BUILTIN = 0;
 

variants/imbrios-logsens-v1p1/pins_arduino.h

@@ -23,6 +23,7 @@
 /* LED_BUILTIN is kept for compatibility reason; mapped to LED2 on the LogSens V1.1 Board */
 static const uint8_t LED_BUILTIN = 33;
 #define BUILTIN_LED  LED_BUILTIN 	// backward compatibility
+#define LED_BUILTIN LED_BUILTIN
 
 /* UART0: Serial Port for Programming and Debugging on the LogSens V1.1 Board */
 static const uint8_t TX = 1;

variants/intorobot-fig/pins_arduino.h

@@ -13,6 +13,7 @@
 
 static const uint8_t LED_BUILTIN = 4;
 #define BUILTIN_LED  LED_BUILTIN // backward compatibility
+#define LED_BUILTIN LED_BUILTIN
 
 static const uint8_t RGB_R_BUILTIN = 27;
 static const uint8_t RGB_G_BUILTIN = 21;

variants/lolin32/pins_arduino.h

@@ -13,6 +13,7 @@
 
 static const uint8_t LED_BUILTIN = 5;
 #define BUILTIN_LED  LED_BUILTIN // backward compatibility
+#define LED_BUILTIN LED_BUILTIN
 
 
 

variants/lopy/pins_arduino.h

@@ -24,6 +24,7 @@
 
 static const uint8_t LED_BUILTIN = 0; // ->2812 RGB !!!
 #define BUILTIN_LED  LED_BUILTIN // backward compatibility
+#define LED_BUILTIN LED_BUILTIN
 
 #define ANT_SELECT 16   // GPIO16 - External Antenna Switch
 

variants/lopy4/pins_arduino.h

@@ -24,6 +24,7 @@
 
 static const uint8_t LED_BUILTIN = 0; // ->2812 RGB !!!
 #define BUILTIN_LED  LED_BUILTIN // backward compatibility
+#define LED_BUILTIN LED_BUILTIN
 
 #define ANT_SELECT 21   // GPIO21 - External Antenna Switch
 

variants/metro_esp-32/pins_arduino.h

@@ -13,6 +13,7 @@
 
 static const uint8_t LED_BUILTIN = 2;
 #define BUILTIN_LED  LED_BUILTIN // backward compatibility
+#define LED_BUILTIN LED_BUILTIN
 
 static const uint8_t KEY_BUILTIN = 0;
 

variants/mgbot-iotik32a/pins_arduino.h

@@ -13,6 +13,7 @@
 
 static const uint8_t LED_BUILTIN = 4;
 #define BUILTIN_LED  LED_BUILTIN // backward compatibility
+#define LED_BUILTIN LED_BUILTIN
 
 static const uint8_t TX = 1;
 static const uint8_t RX = 3;

variants/mgbot-iotik32b/pins_arduino.h

@@ -13,6 +13,7 @@
 
 static const uint8_t LED_BUILTIN = 18;
 #define BUILTIN_LED  LED_BUILTIN // backward compatibility
+#define LED_BUILTIN LED_BUILTIN
 
 // IR receiver
 static const uint8_t IR = 27;

variants/mhetesp32devkit/pins_arduino.h

@@ -13,6 +13,7 @@
 
 static const uint8_t LED_BUILTIN = 2;
 #define BUILTIN_LED  LED_BUILTIN 
+#define LED_BUILTIN LED_BUILTIN
 
 static const uint8_t TX = 1;
 static const uint8_t RX = 3;

variants/mhetesp32minikit/pins_arduino.h

@@ -13,6 +13,7 @@
 
 static const uint8_t LED_BUILTIN = 2;
 #define BUILTIN_LED  LED_BUILTIN 
+#define LED_BUILTIN LED_BUILTIN
 
 static const uint8_t TX = 1;
 static const uint8_t RX = 3;

variants/nano32/pins_arduino.h

@@ -13,6 +13,7 @@
 
 static const uint8_t LED_BUILTIN = 16;
 #define BUILTIN_LED  LED_BUILTIN // backward compatibility
+#define LED_BUILTIN LED_BUILTIN
 
 static const uint8_t BUILTIN_KEY = 0;
 

variants/node32s/pins_arduino.h

@@ -13,6 +13,7 @@
 
 static const uint8_t LED_BUILTIN = 2;
 #define BUILTIN_LED  LED_BUILTIN // backward compatibility
+#define LED_BUILTIN LED_BUILTIN
 
 static const uint8_t KEY_BUILTIN = 0;
 

variants/nodemcu-32s/pins_arduino.h

@@ -13,6 +13,7 @@
 
 static const uint8_t LED_BUILTIN = 2;
 #define BUILTIN_LED  LED_BUILTIN // backward compatibility
+#define LED_BUILTIN LED_BUILTIN
 
 static const uint8_t KEY_BUILTIN = 0;
 

variants/odroid_esp32/pins_arduino.h

@@ -13,6 +13,7 @@
 
 static const uint8_t LED_BUILTIN = 2;
 #define BUILTIN_LED  LED_BUILTIN // backward compatibility
+#define LED_BUILTIN LED_BUILTIN
 
 static const uint8_t TX = 1;
 static const uint8_t RX = 3;

variants/onehorse32dev/pins_arduino.h

@@ -13,6 +13,7 @@
 
 static const uint8_t LED_BUILTIN = 5;
 #define BUILTIN_LED  LED_BUILTIN // backward compatibility
+#define LED_BUILTIN LED_BUILTIN
 
 static const uint8_t KEY_BUILTIN = 0;
 

variants/openkb/pins_arduino.h

@@ -13,6 +13,7 @@
 
 static const uint8_t LED_BUILTIN = 16;
 #define BUILTIN_LED  LED_BUILTIN // backward compatibility
+#define LED_BUILTIN LED_BUILTIN
 
 static const uint8_t TX = 1;
 static const uint8_t RX = 3;

variants/oroca_edubot/pins_arduino.h

@@ -13,6 +13,7 @@
 
 static const uint8_t LED_BUILTIN = 13;
 #define BUILTIN_LED  LED_BUILTIN // backward compatibility
+#define LED_BUILTIN LED_BUILTIN
 
 static const uint8_t TX = 17;
 static const uint8_t RX = 16;

variants/piranha_esp-32/pins_arduino.h

@@ -13,6 +13,7 @@
 
 static const uint8_t LED_BUILTIN = 2;
 #define BUILTIN_LED  LED_BUILTIN // backward compatibility
+#define LED_BUILTIN LED_BUILTIN
 
 static const uint8_t KEY_BUILTIN = 0;
 

variants/pocket_32/pins_arduino.h

@@ -13,6 +13,7 @@
 
 static const uint8_t LED_BUILTIN = 16;
 #define BUILTIN_LED  LED_BUILTIN // backward compatibility
+#define LED_BUILTIN LED_BUILTIN
 
 
 

variants/tbeam/pins_arduino.h

@@ -26,6 +26,7 @@ static const uint8_t KEY_BUILTIN = 39;
 
 static const uint8_t LED_BUILTIN = 14;
 #define BUILTIN_LED  LED_BUILTIN // backward compatibility
+#define LED_BUILTIN LED_BUILTIN
 
 static const uint8_t TX = 1;
 static const uint8_t RX = 3;

variants/ttgo-lora32-v1/pins_arduino.h

@@ -26,6 +26,7 @@
 
 static const uint8_t LED_BUILTIN = 2;
 #define BUILTIN_LED  LED_BUILTIN // backward compatibility
+#define LED_BUILTIN LED_BUILTIN
 
 static const uint8_t KEY_BUILTIN = 0;
 

variants/ttgo-lora32-v2/pins_arduino.h

@@ -32,6 +32,7 @@
 
 static const uint8_t LED_BUILTIN =  22;
 #define BUILTIN_LED  LED_BUILTIN    // backward compatibility
+#define LED_BUILTIN LED_BUILTIN
 
 static const uint8_t KEY_BUILTIN =  0;
 

variants/ttgo-lora32-v21new/pins_arduino.h

@@ -40,6 +40,7 @@
 
 static const uint8_t LED_BUILTIN = 25  ;
 #define BUILTIN_LED  LED_BUILTIN    // backward compatibility
+#define LED_BUILTIN LED_BUILTIN
 
 static const uint8_t KEY_BUILTIN =  0;
 

variants/ttgo-t1/pins_arduino.h

@@ -16,6 +16,7 @@ static const uint8_t RX = 3;
 
 static const uint8_t LED_BUILTIN = 22;
 #define BUILTIN_LED  LED_BUILTIN // backward compatibility
+#define LED_BUILTIN LED_BUILTIN
 
 static const uint8_t SDA = 21;
 // Despite the many diagrams from TTGO showing SCL on pin 22, due to the on-board LED

variants/turta_iot_node/pins_arduino.h

@@ -14,6 +14,7 @@
 // LED
 static const uint8_t LED_BUILTIN = 13;
 #define BUILTIN_LED  LED_BUILTIN // backward compatibility
+#define LED_BUILTIN LED_BUILTIN
 
 // UART
 static const uint8_t TX = 10;

variants/vintlabsdevkitv1/pins_arduino.h

@@ -13,6 +13,7 @@
 
 static const uint8_t LED_BUILTIN = 2;
 #define BUILTIN_LED  LED_BUILTIN // backward compatibility
+#define LED_BUILTIN LED_BUILTIN
 
 static const uint8_t TX = 1;
 static const uint8_t RX = 3;

variants/widora-air/pins_arduino.h

@@ -13,6 +13,7 @@
 
 static const uint8_t LED_BUILTIN = 25;
 #define BUILTIN_LED  LED_BUILTIN // backward compatibility
+#define LED_BUILTIN LED_BUILTIN
 
 
 static const uint8_t KEY_BUILTIN = 0;

variants/wifiduino32/pins_arduino.h

@@ -13,6 +13,7 @@
 
 static const uint8_t LED_BUILTIN = 2;
 #define BUILTIN_LED  LED_BUILTIN // backward compatibility
+#define LED_BUILTIN LED_BUILTIN
 
 static const uint8_t KEY_BUILTIN = 0;
 

variants/wipy3/pins_arduino.h

@@ -13,6 +13,7 @@
 
 static const uint8_t LED_BUILTIN = 0; // ->2812 RGB !!!
 #define BUILTIN_LED  LED_BUILTIN // backward compatibility
+#define LED_BUILTIN LED_BUILTIN
 
 #define ANT_SELECT 21   // GPIO21 - External Antenna Switch
 

variants/xinabox/pins_arduino.h

@@ -13,6 +13,7 @@
 
 static const uint8_t LED_BUILTIN = 27;
 #define BUILTIN_LED  LED_BUILTIN // backward compatibility
+#define LED_BUILTIN LED_BUILTIN
 
 static const uint8_t TX = 1;
 static const uint8_t RX = 3;