Add remaining non-deprecated drivers

site/content/en/docs/Getting started/includes/virtualbox.md

-Download and install the latest version of VirtualBox from https://www.virtualbox.org/
-
-Once installed, start minikube:
-
-```shell
-minikube start
-```

site/content/en/docs/Getting started/linux.md

@@ -55,44 +55,15 @@ If the above command outputs "no":
 {{% tabs %}}
 
 {{% tab "VirtualBox" %}}
-{{% readfile file="/docs/Getting started/includes/virtualbox.md" %}}
+{{% readfile file="/docs/Reference/Drivers/includes/virtualbox_usage.md" %}}
 {{% /tab %}}
 {{% tab "KVM" %}}
-
-### Prerequisites Installation
-
-{{% readfile file="/docs/Reference/Drivers/includes/kvm2_prereqs_install.md" %}}
-
-### Driver Installation
-
-{{% readfile file="/docs/Reference/Drivers/includes/kvm2_driver_install.md" %}}
-
-### Usage
-
-```shell
-minikube start --vm-driver=kvm2
-```
-To make kvm2 the default for future invocations, run:
-
-```shell
-minikube config set vm-driver kvm2
-```
-
+{{% readfile file="/docs/Reference/Drivers/includes/kvm2_usage.md" %}}
 {{% /tab %}}
 {{% tab "None (bare-metal)" %}}
+If you are already running minikube from inside a VM, it is possible to skip the creation of an additional VM layer by using the `none` driver.
 
-If you are already running minikube from inside a VM, it is possible to skip the creation of an additional VM layer by using the `none` driver. 
-This mode does come with additional requirements:
-
-- docker
-- systemd
-- sudo access
-
-```shell
-sudo minikube start --vm-driver=none
-```
-
-Please see the [docs/reference/drivers/none](none driver) documentation for more information.
+{{% readfile file="/docs/Reference/Drivers/includes/none_usage.md" %}}
 {{% /tab %}}
 {{% /tabs %}}
 

site/content/en/docs/Getting started/macos.md

@@ -14,7 +14,7 @@ weight: 2
 {{% tabs %}}
 {{% tab "Brew" %}}
 
-If you have the [Brew Package Manager](https://brew.sh/) installed, this will download and install minikube to /usr/local/bin:
+If the [Brew Package Manager](https://brew.sh/) is installed, use it to download and install minikube:
 
 ```shell
 brew install minikube
@@ -30,68 +30,22 @@ curl -LO https://storage.googleapis.com/minikube/releases/latest/minikube-darwin
   && sudo install minikube-darwin-amd64 /usr/local/bin/minikube
 ```
 {{% /tab %}}
-
 {{% /tabs %}}
 
 ## Hypervisor Setup
 
 {{% tabs %}}
 {{% tab "VirtualBox" %}}
-{{% readfile file="/docs/Getting started/includes/virtualbox.md" %}}
+{{% readfile file="/docs/Reference/Drivers/includes/virtualbox_usage.md" %}}
 {{% /tab %}}
 {{% tab "Hyperkit" %}}
-
-
-### Prerequisites Installation
-
-{{% readfile file="/docs/Reference/Drivers/includes/hyperkit_prereqs_install.md" %}}
-
-### Driver Installation
-
-{{% readfile file="/docs/Reference/Drivers/includes/hyperkit_driver_install.md" %}}
-
-### Usage
-
-```shell
-minikube start --vm-driver=hyperkit
-```
-
-To make hyperkit the default for future invocations:
-
-```shell
-minikube config set vm-driver hyperkit
-```
-
+{{% readfile file="/docs/Reference/Drivers/includes/hyperkit_usage.md" %}}
 {{% /tab %}}
-
 {{% tab "Parallels" %}}
-
-Start minikube with Parallels support using:
-
-```shell
-minikube start --vm-driver=parallels
-```
-
-To make parallels the default for future invocations:
-
-```shell
-minikube config set vm-driver parallels
-```
+{{% readfile file="/docs/Reference/Drivers/includes/parallels_usage.md" %}}
 {{% /tab %}}
-
-{{% tab "VMware Fusion" %}}
-
-Start minikube with VMware Fusion support using:
-
-```shell
-minikube start --vm-driver=vmwarefusion
-```
-
-To make vmwarefusion the default for future invocations:
-
-```shell
-minikube config set vm-driver vmwarefusion
-```
+{{% tab "VMware" %}}
+{{% readfile file="/docs/Reference/Drivers/includes/vmware_macos_usage.md" %}}
 {{% /tab %}}
 
 {{% /tabs %}}

site/content/en/docs/Getting started/windows.md

@@ -15,12 +15,12 @@ weight: 3
 
 {{% tabs %}}
 {{% tab "Direct" %}}
-Download and run the [installer](https://storage.googleapis.com/minikube/releases/latest/minikube-installer.exe)
+Download and run the [minikube installer](https://storage.googleapis.com/minikube/releases/latest/minikube-installer.exe)
 {{% /tab %}}
 
 {{% tab "Chocolatey" %}}
 
-If you have the [Chocolatey Package Manager](https://chocolatey.org/) installed, you can install minikube if run as an Administrator:
+If the [Chocolatey Package Manager](https://chocolatey.org/) is installed, use it to install minikube:
 
 ```shell
 choco install minikube
@@ -55,24 +55,10 @@ Hyper-V Requirements:     A hypervisor has been detected.
 
 {{% tabs %}}
 {{% tab "VirtualBox" %}}
-{{% readfile file="/docs/Getting started/includes/virtualbox.md" %}}
+{{% readfile file="/docs/Reference/Drivers/includes/virtualbox_usage.md" %}}
 {{% /tab %}}
 {{% tab "Hyper-V" %}}
-
-If Hyper-V is active, you can start minikube with Hyper-V support using:
-
-```shell
-minikube start --vm-driver=hyperv
-```
-
-NOTE: If this fails due to networking issues, see the [Hyper-V driver documentation](https://github.com/kubernetes/minikube/blob/master/docs/drivers.md#hyper-v-driver) for further instructions.
-
-To make hyperv the default for future invocations:
-
-```shell
-minikube config set vm-driver hyperv
-```
-
+{{% readfile file="/docs/Reference/Drivers/includes/hyperv_usage.md" %}}
 {{% /tab %}}
 {{% /tabs %}}
 

site/content/en/docs/Reference/Drivers/hyperkit.md

 ---
-title: "HyperKit"
-linkTitle: "HyperKit"
+title: "hyperkit"
+linkTitle: "hyperkit"
 weight: 1
 date: 2018-08-08
 description: >
@@ -11,29 +11,7 @@ description: >
 
 [HyperKit](https://github.com/moby/hyperkit) is an open-source hypervisor for macOS hypervisor, optimized for lightweight virtual machines and container deployment.
 
-## Requirements
-
-- macOS High Sierra 10.12 (or newer)
-- HyperKit
-
-## Installing Prerequisites
-
-{{% readfile file="/docs/Reference/Drivers/includes/hyperkit_prereqs_install.md" %}}
-
-## Driver installation
-
-{{% readfile file="/docs/Reference/Drivers/includes/hyperkit_driver_install.md" %}}
-
-## Usage
-
-```shell
-minikube start --vm-driver=hyperkit
-```
-To make hyperkit the default driver:
-
-```shell
-minikube config set vm-driver hyperkit
-```
+{{% readfile file="/docs/Reference/Drivers/includes/hyperkit_usage.md" %}}
 
 ## Special features
 

site/content/en/docs/Reference/Drivers/hyperv.md

+---
+title: "hyperv"
+linkTitle: "hyperv"
+weight: 2
+date: 2017-01-05
+date: 2018-08-05
+description: >
+  Microsoft Hyper-V driver
+---
+
+## Overview
+
+Hyper-V is a native hypervisor built in to modern versions of Microsoft Windows.
+
+{{% readfile file="/docs/Reference/Drivers/includes/hyperv_usage.md" %}}
+
+## Special features
+
+The `minikube start` command supports 3 additional hyperv specific flags:
+
+* **\--hyperv-virtual-switch**: The hyperv virtual switch name. Defaults to first found
+
+## Issues
+
+Also see [co/hyperv open issues](https://github.com/kubernetes/minikube/labels/co%2Fhyperv)
+
+## Troubleshooting
+
+* Run `minikube start --alsologtostderr -v=7` to debug crashes

site/content/en/docs/Reference/Drivers/includes/hyperkit_prereqs_install.md

-* If you have Docker for Desktop installed, you already have hyperkit installed.
-* If you have the [Brew Package Manager](https://brew.sh/) installed, run:
-
-```shell
-brew install hyperkit
-```
-* To install HyperKit manually, see the [HyperKit on GitHub](https://github.com/moby/hyperkit)
\ No newline at end of file

site/content/en/docs/Reference/Drivers/includes/hyperkit_driver_install.md → site/content/en/docs/Reference/Drivers/includes/hyperkit_usage.md

-Download and install the latest minikube hyperkit driver:
+## Requirements
+
+- macOS 10.11+
+- HyperKit
+
+## Installing dependencies
+
+If Docker for Desktop is installed, HyperKit is already installed.
+
+Otherwise, if the [Brew Package Manager](https://brew.sh/) is installed:
+
+```shell
+brew install hyperkit
+```
+
+As a final alternative, you can [Install HyperKit from GitHub](https://github.com/moby/hyperkit)
+
+## Driver Installation
+
+Download and install the latest minikube driver:
 
 ```shell
 curl -LO https://storage.googleapis.com/minikube/releases/latest/

site/content/en/docs/Reference/Drivers/includes/hyperv_usage.md

+## Requirements
+
+* Windows 10 Pro 
+* Hyper-V enabled
+* A Hyper-V switch created
+
+## Configuring Hyper-V
+
+Open a PowerShell console as Administrator, and run the following command:
+
+```powershell
+Enable-WindowsOptionalFeature -Online -FeatureName Microsoft-Hyper-V -All
+```
+
+Reboot, and create a new external network switch:
+
+```powershell
+New-VMSwitch -name ExternalSwitch  -NetAdapterName Ethernet -AllowManagementOS $true 
+```
+
+Set this network switch as the minikube default:
+
+```shell
+minikube config set hyperv-virtual-switch ExternalSwitch
+```
+
+## Usage
+
+```shell
+minikube start --vm-driver=hyperv 
+```
+To make hyperv the default driver:
+
+```shell
+minikube config set vm-driver hyperv
+```

site/content/en/docs/Reference/Drivers/includes/kvm2_driver_install.md

-```shell
- curl -LO https://storage.googleapis.com/minikube/releases/latest/docker-machine-driver-kvm2 \
-  && sudo install docker-machine-driver-kvm2 /usr/local/bin/
-```

site/content/en/docs/Reference/Drivers/includes/kvm2_prereqs_install.md → site/content/en/docs/Reference/Drivers/includes/kvm2_usage.md

+## Requirements
+
+- libvirt v1.3.1 or higher
+- qemu-kvm v2.0 or higher
+
+## Installing Prerequisites
+
 Proper installation of KVM and libvirt is highly specific to each Linux distribution. Please consult:
 
 * [ArchLinux](https://wiki.archlinux.org/index.php/Libvirt)
@@ -13,3 +20,10 @@ Once configured, validate that libvirt reports no errors:
 ```shell
 virt-host-validate
 ```
+
+## Driver installation
+
+```shell
+ curl -LO https://storage.googleapis.com/minikube/releases/latest/docker-machine-driver-kvm2 \
+  && sudo install docker-machine-driver-kvm2 /usr/local/bin/
+```

site/content/en/docs/Reference/Drivers/includes/none_usage.md

+## Requirements
+
+VM running a systemd-based Linux distribution ([see #2704](https://github.com/kubernetes/minikube/issues/2704))
+
+## Usage
+
+The none driver requires minikube to be run as root, until [#3760](https://github.com/kubernetes/minikube/issues/3760) can be addressed.
+
+```shell
+sudo minikube start --vm-driver=none
+```
+
+To make none the default for future invocations, run:
+
+```shell
+sudo minikube config set vm-driver none
+```

site/content/en/docs/Reference/Drivers/includes/parallels_usage.md

+## Requirements
+
+* Parallels Desktop 11.0.0+ Pro or Business edition
+
+## Driver Installation
+
+If the [Brew Package Manager](https://brew.sh/) is installed, run:
+
+```
+brew install docker-machine-driver-parallels
+```
+
+Otherwise:
+
+```shell
+r=https://api.github.com/repos/Parallels/docker-machine-parallels
+curl -LO $(curl -s $r/releases/latest | grep -o 'http.*parallels' | head -n1) \
+ && install docker-machine-driver-parallels /usr/local/bin/
+```

site/content/en/docs/Reference/Drivers/includes/virtualbox_usage.md

+## Requirements
+
+- [https://www.virtualbox.org/wiki/Downloads](VirtualBox) 5.2 or higher
+
+## Usage
+
+minikube currently uses VirtualBox by default, but it can also be explicitly set:
+
+```shell
+minikube start --vm-driver=virtualbox
+```
+To make virtualbox the default driver:
+
+```shell
+minikube config set vm-driver virtualbox
+```

site/content/en/docs/Reference/Drivers/includes/vmware_macos_usage.md

+## Requirements
+
+* VMware Fusion
+
+## Driver Installation
+
+If the [Brew Package Manager](https://brew.sh/) is installed, run:
+
+```
+brew install docker-machine-driver-vmware
+```
+
+Otherwise:
+
+```shell
+r=https://api.github.com/repos/machine-drivers/docker-machine-driver-vmware
+curl -LO $(curl -s $r/releases/latest | grep -o 'http.*darwin_amd64' | head -n1) \
+ && install docker-machine-driver-vmware_darwin_amd64 \
+  /usr/local/bin/docker-machine-driver-vmware
+```
+
+## Usage
+
+```shell
+minikube start --vm-driver=vmware
+```
+To make vmware the default driver:
+
+```shell
+minikube config set vm-driver vmware
+```
\ No newline at end of file

site/content/en/docs/Reference/Drivers/kvm2.md

 ---
 title: "kvm2"
 linkTitle: "kvm2"
-weight: 1
+weight: 2
 date: 2017-01-05
 date: 2018-08-05
 description: >
@@ -12,29 +12,7 @@ description: >
 
 [KVM (Kernel-based Virtual Machine)](https://www.linux-kvm.org/page/Main_Page) is a full virtualization solution for Linux on x86 hardware containing virtualization extensions. To work with KVM, minikube uses the [libvirt virtualization API](https://libvirt.org/)
 
-## Requirements
-
-- libvirt v1.3.1 or higher
-- qemu-kvm v2.0 or higher
-
-## Installing Prerequisites
-
-{{% readfile file="/docs/Reference/Drivers/includes/kvm2_prereqs_install.md" %}}
-
-## Driver installation
-
-{{% readfile file="/docs/Reference/Drivers/includes/kvm2_driver_install.md" %}}
-
-## Usage
-
-```shell
-minikube start --vm-driver=kvm2
-```
-To make kvm2 the default for future invocations, run:
-
-```shell
-minikube config set vm-driver kvm2
-```
+{{% readfile file="/docs/Reference/Drivers/includes/kvm2_usage.md" %}}
 
 ## Special features
 

site/content/en/docs/Reference/Drivers/none.md

 ---
 title: "none"
 linkTitle: "none"
-weight: 1
+weight: 3
 date: 2017-01-05
 date: 2018-08-05
 description: >
@@ -12,28 +12,7 @@ description: >
 
 This document is written for system integrators who are familiar with minikube, and wish to run it within a customized VM environment. The `none` driver allows advanced minikube users to skip VM creation, allowing minikube to be run on a user-supplied VM.
 
-## Features
-
-* Ability to run without the creation of an additional VM
-* Fast setup and teardown
-
-## Requirements
-
-VM running a systemd-based Linux distribution ([see #2704](https://github.com/kubernetes/minikube/issues/2704))
-
-## Usage
-
-The none driver requires minikube to be run as root, until [#3760](https://github.com/kubernetes/minikube/issues/3760) can be addressed.
-
-```shell
-sudo minikube start --vm-driver=none
-```
-
-To make none the default for future invocations, run:
-
-```shell
-sudo minikube config set vm-driver none
-```
+{{% readfile file="/docs/Reference/Drivers/includes/none_usage.md" %}}
 
 ## Issues
 

site/content/en/docs/Reference/Drivers/parallels.md

+---
+title: "parallels"
+linkTitle: "parallels"
+weight: 4
+date: 2018-08-08
+description: >
+  Parallels driver
+---
+
+## Overview
+
+The Parallels driver is particularly useful for users who own Parallels Desktop, as it does not require VT-x hardware support.
+
+{{% readfile file="/docs/Reference/Drivers/includes/parallels_usage.md" %}}
+
+## Issues
+
+* [Full list of open 'parallels' driver issues](https://github.com/kubernetes/minikube/labels/co%2Fparallels)
+
+## Troubleshooting
+
+* Run `minikube start --alsologtostderr -v=7` to debug crashes
+* 
\ No newline at end of file

site/content/en/docs/Reference/Drivers/virtualbox.md

 ---
-title: "VirtualBox"
-linkTitle: "VirtualBox"
-weight: 1
+title: "virtualbox"
+linkTitle: "virtualbox"
+weight: 5
 date: 2018-08-08
 description: >
   VirtualBox driver
@@ -11,23 +11,7 @@ description: >
 
 VirtualBox is the oldest and most stable VM driver for minikube.
 
-
-## Requirements
-
-- [https://www.virtualbox.org/wiki/Downloads](VirtualBox) 5.2 or higher
-
-## Usage
-
-minikube currently uses VirtualBox by default, but it can also be explicitly set:
-
-```shell
-minikube start --vm-driver=virtualbox
-```
-To make virtualbox the default driver:
-
-```shell
-minikube config set vm-driver virtualbox
-```
+{{% readfile file="/docs/Reference/Drivers/includes/virtualbox_usage.md" %}}
 
 ## Special features
 

site/content/en/docs/Reference/Drivers/vmware.md

+---
+title: "vmware"
+linkTitle: "vmware"
+weight: 6
+date: 2018-08-08
+description: >
+  VMware driver
+---
+
+## Overview
+
+The vmware driver supports virtualization across all VMware based hypervisors.
+
+{{% tabs %}}
+{{% tab "macOS" %}}
+{{% readfile file="/docs/Reference/Drivers/includes/vmware_macos_usage.md" %}}
+{{% /tab %}}
+{{% tab "Linux" %}}
+No documentation is available yet.
+{{% /tab %}}
+{{% tab "Windows" %}}
+No documentation is available yet.
+{{% /tab %}}
+{{% /tabs %}}
+
+## Issues
+
+* [Full list of open 'vmware' driver issues](https://github.com/kubernetes/minikube/labels/co%2Fvmware)
+
+## Troubleshooting
+
+* Run `minikube start --alsologtostderr -v=7` to debug crashes
\ No newline at end of file