- 23 9月, 2022 1 次提交
-
-
由 hg0720 提交于
-
- 22 9月, 2022 2 次提交
-
-
由 BreederBai 提交于
-
由 taiexinleni 提交于
* bsp beaglebone: add IAR template files and fix it's build error ATTENTION: project.* was generated by scons, so I add it to gitignore. rtconfig.py *FLAGS located in "PLATFORM == 'iccarm'" are unverified and maybe wrong. (我只是从STM32里面抄来,然后根据自己的理解改了一下,并没有验证这些参数的正确性, 我也不知道怎么用命令行调用这些参数来编译) * bsp beaglebone: add beaglebone_ram.icf ROM address from uboot_cmd.txt am335x_DDR.icf use 0x82000000, different to uboot_cmd.txt & gcc beaglebone_ram.lds, the difference will easy cause later developer got below error: => go 0x80200000 ## Starting application at 0x80200000 ... undefined instruction pc : [<8200956c>] lr : [<8ff62497>] reloc pc : [<728a956c>] lr : [<80802497>] sp : 8df37358 ip : 00000000 fp : 00000002 r10: 8df4d448 r9 : 8df3feb8 r8 : 8ffd30f8 r7 : 8ff78089 r6 : 00000002 r5 : 80200000 r4 : 8df4d44c r3 : 80200000 r2 : 8df4d44c r1 : 8df4d44c r0 : 00000001 Flags: nzCv IRQs off FIQs on Mode SVC_32 Code: 5dbffcdd bb9bdf7f abf85423 eff1f77f (7ed7daaf) Resetting CPU ... resetting ... * libcpu am335x: context_iar.S rt_hw_context_switch: add thumb mode support IAR new project defualt Processor mode is Thumb, this will cause user easy occur the following error: ... msh />Execption: r00:0x8800aaa8 r01:0x802080c5 r02:0x00000000 r03:0x88009b4c r04:0x00001000 r05:0x00000000 r06:0x00001403 r07:0x00100000 r08:0x00000000 r09:0x00000000 r10:0x0000000a fp :0x0000000a ip :0x65687374 sp :0x00006c6c lr :0x0000008a pc :0x88008be0 cpsr:0x880001bc software interrupt shutdown... (0) assertion failed at function:rt_hw_cpu_shutdown, line number:160 * bsp beaglebone: change IAR template.ewp code use Arm mode Arm mode bin size will bigger than Thumb mode * libcpu am335x: IAR: use rt_hw_cpu_dcache_enable instead of rt_cpu_dcache_enable Reviewer mysterywolf say: 麻烦把rt_cpu_icache_enable 和 rt_cpu_dcache_enable, 统一改成 rt_hw_cpu_icache_enable 和 rt_hw_cpu_dcache_enable rt_hw_cpu_icache_enable 和 rt_hw_cpu_dcache_enable 是其他bsp也是这么命名的 这是个命名统一的函数
-
- 20 9月, 2022 5 次提交
-
-
由 mysterywolf 提交于
-
由 liyangyang 提交于
-
由 还_没_想_好 提交于
* [fix] Fix simulator compilation warnings * Update bsp/simulator/rtconfig_project.h Co-authored-by:
Man, Jianting (Meco) <920369182@qq.com>
-
由 Wayne 提交于
Co-authored-by: NWayne Lin <wclin@nuvoton.com>
-
由 liyangyang 提交于
-
- 19 9月, 2022 3 次提交
-
-
由 hg0720 提交于
-
由 o777788 提交于
-
由 mysterywolf 提交于
* [rtduino][stm32l475-pandora] 重新整理pinout * [rtduino][bluepill] 整理pinout * [rtduino][stm32-f401nucleo]整理pinout * [rtduino][stm32-pandora] 整理pinout * [rtduino][stm32f072]整理pinout
-
- 18 9月, 2022 2 次提交
-
-
由 liyangyang 提交于
-
由 hg0720 提交于
-
- 17 9月, 2022 1 次提交
-
-
由 linshire 提交于
添加了ch32v307的adc驱动,已在ch32v307评估班上对adc1ch5进行了验证,并修改了kconfig以及scons脚本,可以成功编译以及使用
-
- 16 9月, 2022 4 次提交
-
-
由 myshowtogo 提交于
修复字符串比较错误
-
由 charlown 提交于
将__CC_ARM 替换成 __ARMCC_VERSION 用以支持AC6编译,通过gd32f303测试。
-
由 mysterywolf 提交于
* bsp beaglebone: rerun menuconfg * bsp beaglebone: add uart0 support * bsp beaglebone: use uart0 as console * bsp beaglebone: add heap init fix rt_application_init() error: (m != RT_NULL) assertion failed at function:rt_smem_alloc, line number:288 * bsp beaglebone: add mmu & interrupt init must init mmu, otherwise no interrupt is generated, cause scheduler can't work. I don't know why need mmu, just seen: bsp/rockchip/rk3568/driver/board.c * libcpu am335x: reset interrupt controller before init vector I think reset before init is more better AM335X_StarterWare_02_00_01_01\system_config\armv7a\am335x\interrupt.c IntAINTCInit() * bsp beaglebone: full gpio driver support * bsp beaglebone: add tftpboot way to uboot_cmd.txt * bsp beaglebone: optimize am33xx_gpio_hdr, check irqstatus is the last one Co-authored-by:
YangZhongQing <vipox@qq.com>
-
由 mysterywolf 提交于
-
- 15 9月, 2022 2 次提交
-
-
由 o777788 提交于
* [imxrt 1170]add flexspi support * format file * format file * update flexspi serial root clk to 80MHz * format file
-
由 mysterywolf 提交于
* [rtduino][bluepill] update readme
-
- 14 9月, 2022 1 次提交
-
-
由 tangzz98 提交于
-
- 13 9月, 2022 1 次提交
-
-
由 o777788 提交于
* add us delay * formating file
-
- 12 9月, 2022 1 次提交
-
-
由 Wayne 提交于
* [bsp/nuvoton] Support NuMaker-M467HJ BSP and update drivers. * Format files. Co-authored-by: NWayne Lin <wclin@nuvoton.com>
-
- 11 9月, 2022 1 次提交
-
-
由 傻傻的我 提交于
-
- 10 9月, 2022 1 次提交
-
-
由 o777788 提交于
* update sdk files * add dcd config * format files * formating file
-
- 09 9月, 2022 6 次提交
-
-
由 傻傻的我 提交于
-
由 o777788 提交于
* add sdio support * update board kconfig * 优化SD卡挂载文件系统 * 使用通用接口实现led的闪烁操作
-
由 liYangYang 提交于
* [RTduino]更新引脚分布 * update * update readme
-
由 mysterywolf 提交于
-
由 hg0720 提交于
-
由 嵌入式路上的流浪 提交于
-
- 08 9月, 2022 2 次提交
-
-
由 liyangyang 提交于
-
由 Yifang 提交于
-
- 07 9月, 2022 5 次提交
-
-
由 mysterywolf 提交于
版本控制规范:https://semver.org/ 目前的版本子号不是很规范,其中RT_VERSION甚至和VS那边造成了冲突 ```c /* RT-Thread version information */ #define RT_VERSION 4L /**< major version number */ #define RT_SUBVERSION 1L /**< minor version number */ #define RT_REVISION 1L /**< revise version number */ ``` 参考ESP32: ```c /** Major version number (X.x.x) */ #define ESP_ARDUINO_VERSION_MAJOR 2 /** Minor version number (x.X.x) */ #define ESP_ARDUINO_VERSION_MINOR 0 /** Patch version number (x.x.X) */ #define ESP_ARDUINO_VERSION_PATCH 3 ``` 建议改成: ```c /* Major version number (X.x.x) */ #define RT_VERSION_MAJOR 4 /* Minor version number (x.X.x) */ #define RT_VERSION_MINOR 2 /* Patch version number (x.x.X) */ #define RT_VERSION_PATCH 0 ```
-
由 liyangyang 提交于
-
由 Yifang 提交于
* [add] board/Kconfig 完善SPI3部分 * [add] 提交代码注释 Co-authored-by:
Man, Jianting (Meco) <920369182@qq.com>
-
由 o777788 提交于
fix flexcan driver for imxrt1170
-
由 嵌入式路上的流浪 提交于
-
- 06 9月, 2022 2 次提交