Co-authored-by: NWayne Lin <wclin@nuvoton.com>

* [bsp/nuvoton] Support NuMaker-M467HJ BSP and update drivers.

* Format files.
Co-authored-by: NWayne Lin <wclin@nuvoton.com>

版本控制规范：https://semver.org/

目前的版本子号不是很规范，其中RT_VERSION甚至和VS那边造成了冲突
```c
/* RT-Thread version information */
#define RT_VERSION                      4L              /**< major version number */
#define RT_SUBVERSION                   1L              /**< minor version number */
#define RT_REVISION                     1L              /**< revise version number */
```

参考ESP32：
```c
/** Major version number (X.x.x) */
#define ESP_ARDUINO_VERSION_MAJOR   2
/** Minor version number (x.X.x) */
#define ESP_ARDUINO_VERSION_MINOR   0
/** Patch version number (x.x.X) */
#define ESP_ARDUINO_VERSION_PATCH   3
```

建议改成：
```c
/* Major version number (X.x.x) */
#define RT_VERSION_MAJOR   4
/* Minor version number (x.X.x) */
#define RT_VERSION_MINOR   2
/* Patch version number (x.x.X) */
#define RT_VERSION_PATCH   0
```

* Add CANFD support and correct typos

- Added CANFD required fields to can.h
- Fixed typos in can.h and can.c
- Corrected all the projects affected by the typo
- Fixed wrong line-ending in some affected can driver files
Signed-off-by: NFan YANG <fan.yang@hpmicro.com>

* update
Signed-off-by: NFan YANG <fan.yang@hpmicro.com>
Co-authored-by: Meco Man <920369182@qq.com>

* [rtc] use gmtime_r to replace gmtime

* [bsp/nuvoton] Upload missing files.
Co-authored-by: NWayne Lin <wclin@nuvoton.com>

因为不确定后续IAR是否会像Keil一样内含有不同的编译工具链
此外，将判断条件改为列表方式，这样更方便后续增加其他可能的IAR编译链

1. Sync 4.1.1+.
2. Add SDIO drivers for M480/M2354 platforms.
3. Update LVGL porting.
4. Add N9H30 FMI NAND driver.
Co-authored-by: NWayne Lin <wclin@nuvoton.com>

Reason: Interrupts were not cleaned up during initialization

* bug fixed gpio_mode_set miss gd32_spi->mosi_pin,gd32_spi->sck_pin
* feature,add gd32_spi's alt_func_num member for different spi periph's gpio
* feature,add spi3,spi4,and support multi spi devices
* feature,add rt_hw_spi_device_attach api
* tested on the gd32f450i-eval board

* [gcc][armcc][armclang] rtconfig.CROSS_TOOL->rtconfig.PLATFORM

* [update] add fal component.

* [update] format code.

* [update] change PKG_USING_FAL to RT_USING_FAL

* [update] format code.

* [update] fal

* [update] delete FAL_SW_VERSION

1. Add default rtconfig.h header.
2. Fix IP reset issue.
Co-authored-by: NWayne Lin <wclin@nuvoton.com>

* add arg for rt_usb_host_init call

1. Remove dfs_posix.h including for syncing 4.1.0.
2. Fix issue in crypto driver.
3. Add LVGLv81 supporting in NuMaker-M2354 BSP.
4. Update USB board menu in M480 BSP.

* Update drivers.

1. Improve LVGL avg FPS.
2. Sync configuration to 4.1.0.

* [Nuvoton] Update drivers.

1. Fix open-control order issue in CAN driver.
2. [N9H30] Improve N9H30 I2C busy-wait implementation.
3. [N9H30] Support 1024x600x32b LCD panel.
4. Move nu_packages menu into sub-menu of board.

* Update menu-option.

1. Set BOARD_USING_LCM is on by default.
2. Fix default value setting in choice-option.

* Fix control function in I2C driver.

* Add sdk_dist.py and ADC touching calibration function.
Co-authored-by: NWayne Lin <wclin@nuvoton.com>

1. Fix open-control order issue in CAN driver.
2. [N9H30] Improve N9H30 I2C busy-wait implementation.
3. [N9H30] Support 1024x600x32b LCD panel.
4. Move nu_packages menu into sub-menu of board.

* [console] 解决在没有定义RT_USING_DEVICE的情况下使用device报错的问题

* format codes

* [libc] 整理格式

* refresh projects

1. Improve LVGL avg FPS.
2. Sync configuration to 4.1.0.

1. Improve LVGL avg FPS.
2. Sync configuration to 4.1.0.

1. Add RTGRAPHIC_CTRL_PAN_DISPLAY and RTGRAPHIC_CTRL_WAIT_VSYNC control command.
2. Add calibration data of 480x272 ADC touching.
3. Add 480x272 LCD panel menu option and driver.
4. Update lv_conf.h.

1. ARM9 EHCI timeout issue.
2. Sync mainstream.