Merge branch 'dygraph' of https://github.com/PaddlePaddle/PaddleOCR into dyg_db

PPOCRLabel/Makefile

+# ex: set ts=8 noet:
+
+all: qt5 test
+
+test: testpy3
+
+testpy2:
+	python -m unittest discover tests
+
+testpy3:
+	python3 -m unittest discover tests
+
+qt4: qt4py2
+
+qt5: qt5py3
+
+qt4py2:
+	pyrcc4 -py2 -o libs/resources.py resources.qrc
+
+qt4py3:
+	pyrcc4 -py3 -o libs/resources.py resources.qrc
+
+qt5py3:
+	pyrcc5 -o libs/resources.py resources.qrc
+
+clean:
+	rm -rf ~/.labelImgSettings.pkl *.pyc dist labelImg.egg-info __pycache__ build
+
+pip_upload:
+	python3 setup.py upload
+
+long_description:
+	restview --long-description
+
+.PHONY: all

PPOCRLabel/README.md

+# PPOCRLabel
+
+PPOCRLabel是一款适用于OCR领域的半自动化图形标注工具，使用python3和pyqt5编写，支持矩形框标注和四点标注模式，导出格式可直接用于PPOCR检测和识别模型的训练。
+
+<img src="./data/gif/steps.gif" width="100%"/>
+
+## 安装
+
+### 1. 安装PaddleOCR
+参考[PaddleOCR安装文档](https://github.com/PaddlePaddle/PaddleOCR/blob/develop/doc/doc_ch/installation.md)准备好PaddleOCR
+
+### 2. 安装PPOCRLabel
+#### Windows + Anaconda
+
+```
+pip install pyqt5
+cd ./PPOCRLabel # 将目录切换到PPOCRLabel文件夹下
+python PPOCRLabel.py --lang ch
+```
+
+#### Ubuntu Linux
+
+```
+pip3 install pyqt5
+pip3 install trash-cli
+cd ./PPOCRLabel # 将目录切换到PPOCRLabel文件夹下
+python3 PPOCRLabel.py --lang ch
+```
+
+#### macOS
+```
+pip3 install pyqt5
+pip3 uninstall opencv-python # 由于mac版本的opencv与pyqt有冲突，需先手动卸载opencv
+pip3 install opencv-contrib-python-headless # 安装headless版本的open-cv
+cd ./PPOCRLabel # 将目录切换到PPOCRLabel文件夹下
+python3 PPOCRLabel.py --lang ch
+```
+
+## 使用
+
+### 操作步骤
+
+1. 安装与运行：使用上述命令安装与运行程序。
+2. 打开文件夹：在菜单栏点击 “文件” - "打开目录" 选择待标记图片的文件夹<sup>[1]</sup>.
+3. 自动标注：点击 ”自动标注“，使用PPOCR超轻量模型对图片文件名前图片状态<sup>[2]</sup>为 “X” 的图片进行自动标注。
+4. 手动标注：点击 “矩形标注”（推荐直接在英文模式下点击键盘中的 “W”)，用户可对当前图片中模型未检出的部分进行手动绘制标记框。点击键盘P，则使用四点标注模式（或点击“编辑” - “四点标注”），用户依次点击4个点后，双击左键表示标注完成。
+5. 标记框绘制完成后，用户点击 “确认”，检测框会先被预分配一个 “待识别” 标签。
+6. 重新识别：将图片中的所有检测画绘制/调整完成后，点击 “重新识别”，PPOCR模型会对当前图片中的**所有检测框**重新识别<sup>[3]</sup>。
+7. 内容更改：双击识别结果，对不准确的识别结果进行手动更改。
+8. 确认标记：点击 “确认”，图片状态切换为 “√”，跳转至下一张（此时不会直接将结果写入文件）。
+9. 删除：点击 “删除图像”，图片将会被删除至回收站。
+10. 保存结果：用户可以通过菜单中“文件-保存标记结果”手动保存，同时程序也会在用户每确认10张图片后自动保存一次。手动确认过的标记将会被存放在所打开图片文件夹下的*Label.txt*中。在菜单栏点击 “文件” - "保存识别结果"后，会将此类图片的识别训练数据保存在*crop_img*文件夹下，识别标签保存在*rec_gt.txt*中<sup>[4]</sup>。
+
+### 注意
+
+[1] PPOCRLabel以文件夹为基本标记单位，打开待标记的图片文件夹后，不会在窗口栏中显示图片，而是在点击 "选择文件夹" 之后直接将文件夹下的图片导入到程序中。
+
+[2] 图片状态表示本张图片用户是否手动保存过，未手动保存过即为 “X”，手动保存过为 “√”。点击 “自动标注”按钮后，PPOCRLabel不会对状态为 “√” 的图片重新标注。
+
+[3] 点击“重新识别”后，模型会对图片中的识别结果进行覆盖。因此如果在此之前手动更改过识别结果，有可能在重新识别后产生变动。
+
+[4] PPOCRLabel产生的文件放置于标记图片文件夹下，包括一下几种，请勿手动更改其中内容，否则会引起程序出现异常。
+
+|    文件名     |                             说明                             |
+| :-----------: | :----------------------------------------------------------: |
+|   Label.txt   | 检测标签，可直接用于PPOCR检测模型训练。用户每保存10张检测结果后，程序会进行自动写入。当用户关闭应用程序或切换文件路径后同样会进行写入。 |
+| fileState.txt | 图片状态标记文件，保存当前文件夹下已经被用户手动确认过的图片名称。 |
+|  Cache.cach   |              缓存文件，保存模型自动识别的结果。              |
+|  rec_gt.txt   | 识别标签。可直接用于PPOCR识别模型训练。需用户手动点击菜单栏“文件” - "保存识别结果"后产生。 |
+|   crop_img    |   识别数据。按照检测框切割后的图片。与rec_gt.txt同时产生。   |
+
+## 说明
+### 内置模型
+
+ - 默认模型：PPOCRLabel默认使用PaddleOCR中的中英文超轻量OCR模型，支持中英文与数字识别，多种语言检测。
+
+ - 模型语言切换：用户可通过菜单栏中 "PaddleOCR" - "选择模型" 切换内置模型语言，目前支持的语言包括法文、德文、韩文、日文。具体模型下载链接可参考[PaddleOCR模型列表](https://github.com/PaddlePaddle/PaddleOCR/blob/develop/doc/doc_ch/models_list.md).
+
+ - 自定义模型：用户可根据[自定义模型代码使用](https://github.com/PaddlePaddle/PaddleOCR/blob/develop/doc/doc_ch/whl.md#%E8%87%AA%E5%AE%9A%E4%B9%89%E6%A8%A1%E5%9E%8B)，通过修改PPOCRLabel.py中针对[PaddleOCR类的实例化](https://github.com/PaddlePaddle/PaddleOCR/blob/develop/PPOCRLabel/PPOCRLabel.py#L110)替换成自己训练的模型。
+
+### 导出部分识别结果
+
+针对部分难以识别的数据，通过在识别结果的复选框中**取消勾选**相应的标记，其识别结果不会被导出。
+
+*注意：识别结果中的复选框状态仍需用户手动点击保存后才能保留*
+
+### 错误提示
+- 如果同时使用whl包安装了paddleocr，其优先级大于通过paddleocr.py调用PaddleOCR类，whl包未更新时会导致程序异常。
+- PPOCRLabel**不支持对中文文件名**的图片进行自动标注。
+- 针对Linux用户：：如果您在打开软件过程中出现**objc[XXXXX]**开头的错误，证明您的opencv版本太高，建议安装4.2版本：
+	```
+	pip install opencv-python==4.2.0.32
+	```
+- 如果出现''Missing string id '开头的错误，需要重新编译资源：
+	```
+	pyrcc5 -o libs/resources.py resources.qrc
+	```
+### 参考资料
+
+1.[Tzutalin. LabelImg. Git code (2015)](https://github.com/tzutalin/labelImg)

PPOCRLabel/README_en.md

+# PPOCRLabel
+
+PPOCRLabel is a semi-automatic graphic annotation tool suitable for OCR field. It is written in python3 and pyqt5, supporting rectangular box annotation and four-point annotation modes. Annotations can be directly used for the training of PPOCR detection and recognition models.
+
+<img src="./data/gif/steps_en.gif" width="100%"/>
+
+## Installation
+
+### 1. Install PaddleOCR
+
+Refer to [PaddleOCR installation document](https://github.com/PaddlePaddle/PaddleOCR/blob/develop/doc/doc_ch/installation.md) to prepare PaddleOCR
+
+### 2. Install PPOCRLabel
+
+#### Windows + Anaconda
+
+Download and install [Anaconda](https://www.anaconda.com/download/#download) (Python 3+)
+
+```
+pip install pyqt5
+cd ./PPOCRLabel # Change the directory to the PPOCRLabel folder
+python PPOCRLabel.py
+```
+
+#### Ubuntu Linux
+
+```
+pip3 install pyqt5
+pip3 install trash-cli
+cd ./PPOCRLabel # Change the directory to the PPOCRLabel folder
+python3 PPOCRLabel.py
+```
+
+#### macOS
+```
+pip3 install pyqt5
+pip3 uninstall opencv-python # Uninstall opencv manually as it conflicts with pyqt
+pip3 install opencv-contrib-python-headless # Install the headless version of opencv
+cd ./PPOCRLabel # Change the directory to the PPOCRLabel folder
+python3 PPOCRLabel.py
+```
+
+## Usage
+
+### Steps
+
+1. Build and launch using the instructions above.
+
+2. Click 'Open Dir' in Menu/File to select the folder of the picture.<sup>[1]</sup>
+
+3. Click 'Auto recognition', use PPOCR model to automatically annotate images which marked with 'X' <sup>[2]</sup>before the file name.
+
+4. Create Box:
+
+   4.1 Click 'Create RectBox' or press 'W' in English keyboard mode to draw a new rectangle detection box. Click and release left mouse to select a region to annotate the text area.
+
+   4.2 Press 'P' to enter four-point labeling mode which enables you to create any four-point shape by clicking four points with the left mouse button in succession and DOUBLE CLICK the left mouse as the signal of labeling completion.
+
+5. After the marking frame is drawn, the user clicks "OK", and the detection frame will be pre-assigned a "TEMPORARY" label.
+
+6. Click 're-Recognition', model will rewrite ALL recognition results in ALL detection box<sup>[3]</sup>.
+
+7. Double click the result in 'recognition result' list to manually change inaccurate recognition results.
+
+8. Click "Check", the image status will switch to "√",then the program automatically jump to the next(The results will not be written directly to the file at this time).
+
+9. Click "Delete Image" and the image will be deleted to the recycle bin.
+
+10. Labeling result: the user can save manually through the menu "File - Save Label", while the program will also save automatically after every 10 images confirmed by the user.the manually checked label will be stored in *Label.txt* under the opened picture folder.
+    Click "PaddleOCR"-"Save Recognition Results" in the menu bar, the recognition training data of such pictures will be saved in the *crop_img* folder, and the recognition label will be saved in *rec_gt.txt*<sup>[4]</sup>.
+
+### Note
+
+[1] PPOCRLabel uses the opened folder as the project. After opening the image folder, the picture will not be displayed in the dialog. Instead, the pictures under the folder will be directly imported into the program after clicking "Open Dir".
+
+[2] The image status indicates whether the user has saved the image manually. If it has not been saved manually it is "X", otherwise it is "√", PPOCRLabel will not relabel pictures with a status of "√".
+
+[3] After clicking "Re-recognize", the model will overwrite ALL recognition results in the picture.
+Therefore, if the recognition result has been manually changed before, it may change after re-recognition.
+
+[4] The files produced by PPOCRLabel can be found under the opened picture folder including the following, please do not manually change the contents, otherwise it will cause the program to be abnormal.
+
+|   File name   |                         Description                          |
+| :-----------: | :----------------------------------------------------------: |
+|   Label.txt   | The detection label file can be directly used for PPOCR detection model training. After the user saves 10 label results, the file will be automatically saved. It will also be written when the user closes the application or changes the file folder. |
+| fileState.txt | The picture status file save the image in the current folder that has been manually confirmed by the user. |
+|  Cache.cach   |    Cache files to save the results of model recognition.     |
+|  rec_gt.txt   | The recognition label file, which can be directly used for PPOCR identification model training, is generated after the user clicks on the menu bar "File"-"Save recognition result". |
+|   crop_img    | The recognition data, generated at the same time with *rec_gt.txt* |
+
+## Explanation
+
+### Built-in Model
+
+- Default model: PPOCRLabel uses the Chinese and English ultra-lightweight OCR model in PaddleOCR by default, supports Chinese, English and number recognition, and multiple language detection.
+
+- Model language switching: Changing the built-in model language is supportable by clicking "PaddleOCR"-"Choose OCR Model" in the menu bar. Currently supported languages​include French, German, Korean, and Japanese. 
+  For specific model download links, please refer to [PaddleOCR Model List](https://github.com/PaddlePaddle/PaddleOCR/blob/develop/doc/doc_en/models_list_en.md#multilingual-recognition-modelupdating)
+
+- Custom model: The model trained by users can be replaced by modifying PPOCRLabel.py in [PaddleOCR class instantiation](https://github.com/PaddlePaddle/PaddleOCR/blob/develop/PPOCRLabel/PPOCRLabel.py#L110) referring [Custom Model Code](https://github.com/PaddlePaddle/PaddleOCR/blob/develop/doc/doc_en/whl_en.md#use-custom-model)
+
+### Export partial recognition results
+
+For some data that are difficult to recognize, the recognition results will not be exported by **unchecking** the corresponding tags in the recognition results checkbox.
+
+*Note: The status of the checkboxes in the recognition results still needs to be saved manually by clicking Save Button.*
+
+### Error message
+
+- If paddleocr is installed with whl, it has a higher priority than calling PaddleOCR class with paddleocr.py, which may cause an exception if whl package is not updated.
+
+- For Linux users, if you get an error starting with **objc[XXXXX]** when opening the software, it proves that your opencv version is too high. It is recommended to install version 4.2:
+
+	```
+	pip install opencv-python==4.2.0.32
+	```
+- If you get an error starting with **Missing string id **,you need to recompile resources:
+    ```
+	pyrcc5 -o libs/resources.py resources.qrc
+	```
+### Related
+
+1.[Tzutalin. LabelImg. Git code (2015)](https://github.com/tzutalin/labelImg)

PPOCRLabel/combobox.py

+# Copyright (c) <2015-Present> Tzutalin
+# Copyright (C) 2013  MIT, Computer Science and Artificial Intelligence Laboratory. Bryan Russell, Antonio Torralba,
+# William T. Freeman. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and
+# associated documentation files (the "Software"), to deal in the Software without restriction, including without
+# limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the
+# Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
+# The above copyright notice and this permission notice shall be included in all copies or substantial portions of
+# the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT
+# NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT
+# SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF
+# CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+# THE SOFTWARE.
+
+import sys
+try:
+    from PyQt5.QtWidgets import QWidget, QHBoxLayout, QComboBox
+except ImportError:
+    # needed for py3+qt4
+    # Ref:
+    # http://pyqt.sourceforge.net/Docs/PyQt4/incompatible_apis.html
+    # http://stackoverflow.com/questions/21217399/pyqt4-qtcore-qvariant-object-instead-of-a-string
+    if sys.version_info.major >= 3:
+        import sip
+        sip.setapi('QVariant', 2)
+    from PyQt4.QtGui import QWidget, QHBoxLayout, QComboBox
+
+
+class ComboBox(QWidget):
+    def __init__(self, parent=None, items=[]):
+        super(ComboBox, self).__init__(parent)
+
+        layout = QHBoxLayout()
+        self.cb = QComboBox()
+        self.items = items
+        self.cb.addItems(self.items)
+
+        self.cb.currentIndexChanged.connect(parent.comboSelectionChanged)
+
+        layout.addWidget(self.cb)
+        self.setLayout(layout)
+
+    def update_items(self, items):
+        self.items = items
+
+        self.cb.clear()
+        self.cb.addItems(self.items)

PPOCRLabel/libs/__init__.py

+__version_info__ = ('1', '0', '0')
+__version__ = '.'.join(__version_info__)

PPOCRLabel/libs/autoDialog.py

+try:
+    from PyQt5.QtGui import *
+    from PyQt5.QtCore import *
+    from PyQt5.QtWidgets import *
+except ImportError:
+    from PyQt4.QtGui import *
+    from PyQt4.QtCore import *
+
+import json
+
+from libs.utils import newIcon
+
+BB = QDialogButtonBox
+
+
+class Worker(QThread):
+    progressBarValue = pyqtSignal(int)
+    listValue = pyqtSignal(str)
+    endsignal = pyqtSignal(int, str)
+    handle = 0
+
+    def __init__(self, ocr, mImgList, mainThread, model):
+        super(Worker, self).__init__()
+        self.ocr = ocr
+        self.mImgList = mImgList
+        self.mainThread = mainThread
+        self.model = model
+        self.setStackSize(1024*1024)
+
+    def run(self):
+        try:
+            findex = 0
+            for Imgpath in self.mImgList:
+                if self.handle == 0:
+                    self.listValue.emit(Imgpath)
+                    if self.model == 'paddle':
+                        self.result_dic = self.ocr.ocr(Imgpath, cls=True, det=True)
+
+                    # 结果保存
+                    if self.result_dic is None or len(self.result_dic) == 0:
+                        print('Can not recognise file  is :  ', Imgpath)
+                        pass
+                    else:
+                        for res in self.result_dic:
+                            chars = res[1][0]
+                            cond = res[1][1]
+                            posi = res[0]
+                            self.listValue.emit("Transcription: " + chars + " Probability: " + str(cond) + " Location: " + json.dumps(posi))
+                        self.mainThread.result_dic = self.result_dic
+                        self.mainThread.filePath = Imgpath
+                        # 保存
+                        self.mainThread.saveFile(mode='Auto')
+                    findex += 1
+                    self.progressBarValue.emit(findex)
+                else:
+                    break
+            self.endsignal.emit(0, "readAll")
+            self.exec()
+        except Exception as e:
+            print(e)
+            raise
+
+
+class AutoDialog(QDialog):
+
+    def __init__(self, text="Enter object label", parent=None, ocr=None, mImgList=None, lenbar=0):
+        super(AutoDialog, self).__init__(parent)
+        self.setFixedWidth(1000)
+        self.parent = parent
+        self.ocr = ocr
+        self.mImgList = mImgList
+        self.pb = QProgressBar()
+        self.pb.setRange(0, lenbar)
+        self.pb.setValue(0)
+
+        layout = QVBoxLayout()
+        layout.addWidget(self.pb)
+        self.model = 'paddle'
+        self.listWidget = QListWidget(self)
+        layout.addWidget(self.listWidget)
+
+        self.buttonBox = bb = BB(BB.Ok | BB.Cancel, Qt.Horizontal, self)
+        bb.button(BB.Ok).setIcon(newIcon('done'))
+        bb.button(BB.Cancel).setIcon(newIcon('undo'))
+        bb.accepted.connect(self.validate)
+        bb.rejected.connect(self.reject)
+        layout.addWidget(bb)
+        bb.button(BB.Ok).setEnabled(False)
+
+        self.setLayout(layout)
+        # self.setWindowTitle("自动标注中")
+        self.setWindowModality(Qt.ApplicationModal)
+
+        # self.setWindowFlags(Qt.WindowCloseButtonHint)
+
+        self.thread_1 = Worker(self.ocr, self.mImgList, self.parent, 'paddle')
+        self.thread_1.progressBarValue.connect(self.handleProgressBarSingal)
+        self.thread_1.listValue.connect(self.handleListWidgetSingal)
+        self.thread_1.endsignal.connect(self.handleEndsignalSignal)
+
+    def handleProgressBarSingal(self, i):
+        self.pb.setValue(i)
+
+    def handleListWidgetSingal(self, i):
+        self.listWidget.addItem(i)
+        titem = self.listWidget.item(self.listWidget.count() - 1)
+        self.listWidget.scrollToItem(titem)
+
+    def handleEndsignalSignal(self, i, str):
+        if i == 0 and str == "readAll":
+            self.buttonBox.button(BB.Ok).setEnabled(True)
+            self.buttonBox.button(BB.Cancel).setEnabled(False)
+
+    def reject(self):
+        print("reject")
+        self.thread_1.handle = -1
+        self.thread_1.quit()
+        # del self.thread_1
+        # if self.thread_1.isRunning():
+        #     self.thread_1.terminate()
+        # self.thread_1.quit()
+        # super(AutoDialog,self).reject()
+        while not self.thread_1.isFinished():
+            pass
+        self.accept()
+
+    def validate(self):
+        self.accept()
+
+    def postProcess(self):
+        try:
+            self.edit.setText(self.edit.text().trimmed())
+            # print(self.edit.text())
+        except AttributeError:
+            # PyQt5: AttributeError: 'str' object has no attribute 'trimmed'
+            self.edit.setText(self.edit.text())
+            print(self.edit.text())
+
+    def popUp(self):
+        self.thread_1.start()
+        return 1 if self.exec_() else None
+
+    def closeEvent(self, event):
+        print("???")
+        # if self.thread_1.isRunning():
+        #     self.thread_1.quit()
+        #
+        #     # self._thread.terminate()
+        # # del self.thread_1
+        # super(AutoDialog, self).closeEvent(event)
+        self.reject()

PPOCRLabel/libs/colorDialog.py

+# Copyright (c) <2015-Present> Tzutalin
+# Copyright (C) 2013  MIT, Computer Science and Artificial Intelligence Laboratory. Bryan Russell, Antonio Torralba,
+# William T. Freeman. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and
+# associated documentation files (the "Software"), to deal in the Software without restriction, including without
+# limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the
+# Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
+# The above copyright notice and this permission notice shall be included in all copies or substantial portions of
+# the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT
+# NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT
+# SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF
+# CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+# THE SOFTWARE.
+try:
+    from PyQt5.QtGui import *
+    from PyQt5.QtCore import *
+    from PyQt5.QtWidgets import QColorDialog, QDialogButtonBox
+except ImportError:
+    from PyQt4.QtGui import *
+    from PyQt4.QtCore import *
+
+BB = QDialogButtonBox
+
+
+class ColorDialog(QColorDialog):
+
+    def __init__(self, parent=None):
+        super(ColorDialog, self).__init__(parent)
+        self.setOption(QColorDialog.ShowAlphaChannel)
+        # The Mac native dialog does not support our restore button.
+        self.setOption(QColorDialog.DontUseNativeDialog)
+        # Add a restore defaults button.
+        # The default is set at invocation time, so that it
+        # works across dialogs for different elements.
+        self.default = None
+        self.bb = self.layout().itemAt(1).widget()
+        self.bb.addButton(BB.RestoreDefaults)
+        self.bb.clicked.connect(self.checkRestore)
+
+    def getColor(self, value=None, title=None, default=None):
+        self.default = default
+        if title:
+            self.setWindowTitle(title)
+        if value:
+            self.setCurrentColor(value)
+        return self.currentColor() if self.exec_() else None
+
+    def checkRestore(self, button):
+        if self.bb.buttonRole(button) & BB.ResetRole and self.default:
+            self.setCurrentColor(self.default)

PPOCRLabel/libs/constants.py

+# Copyright (c) <2015-Present> Tzutalin
+# Copyright (C) 2013  MIT, Computer Science and Artificial Intelligence Laboratory. Bryan Russell, Antonio Torralba,
+# William T. Freeman. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and
+# associated documentation files (the "Software"), to deal in the Software without restriction, including without
+# limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the
+# Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
+# The above copyright notice and this permission notice shall be included in all copies or substantial portions of
+# the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT
+# NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT
+# SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF
+# CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+# THE SOFTWARE.
+SETTING_FILENAME = 'filename'
+SETTING_RECENT_FILES = 'recentFiles'
+SETTING_WIN_SIZE = 'window/size'
+SETTING_WIN_POSE = 'window/position'
+SETTING_WIN_GEOMETRY = 'window/geometry'
+SETTING_LINE_COLOR = 'line/color'
+SETTING_FILL_COLOR = 'fill/color'
+SETTING_ADVANCE_MODE = 'advanced'
+SETTING_WIN_STATE = 'window/state'
+SETTING_SAVE_DIR = 'savedir'
+SETTING_PAINT_LABEL = 'paintlabel'
+SETTING_LAST_OPEN_DIR = 'lastOpenDir'
+SETTING_AUTO_SAVE = 'autosave'
+SETTING_SINGLE_CLASS = 'singleclass'
+FORMAT_PASCALVOC='PascalVOC'
+FORMAT_YOLO='YOLO'
+SETTING_DRAW_SQUARE = 'draw/square'
+SETTING_LABEL_FILE_FORMAT= 'labelFileFormat'
+DEFAULT_ENCODING = 'utf-8'

PPOCRLabel/libs/create_ml_io.py

+# Copyright (c) <2015-Present> Tzutalin
+# Copyright (C) 2013  MIT, Computer Science and Artificial Intelligence Laboratory. Bryan Russell, Antonio Torralba,
+# William T. Freeman. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and
+# associated documentation files (the "Software"), to deal in the Software without restriction, including without
+# limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the
+# Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
+# The above copyright notice and this permission notice shall be included in all copies or substantial portions of
+# the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT
+# NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT
+# SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF
+# CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+# THE SOFTWARE.
+#!/usr/bin/env python
+# -*- coding: utf8 -*-
+import json
+from pathlib import Path
+
+from libs.constants import DEFAULT_ENCODING
+import os
+
+JSON_EXT = '.json'
+ENCODE_METHOD = DEFAULT_ENCODING
+
+
+class CreateMLWriter:
+    def __init__(self, foldername, filename, imgsize, shapes, outputfile, databasesrc='Unknown', localimgpath=None):
+        self.foldername = foldername
+        self.filename = filename
+        self.databasesrc = databasesrc
+        self.imgsize = imgsize
+        self.boxlist = []
+        self.localimgpath = localimgpath
+        self.verified = False
+        self.shapes = shapes
+        self.outputfile = outputfile
+
+    def write(self):
+        if os.path.isfile(self.outputfile):
+            with open(self.outputfile, "r") as file:
+                input_data = file.read()
+                outputdict = json.loads(input_data)
+        else:
+            outputdict = []
+
+        outputimagedict = {
+            "image": self.filename,
+            "annotations": []
+        }
+
+        for shape in self.shapes:
+            points = shape["points"]
+
+            x1 = points[0][0]
+            y1 = points[0][1]
+            x2 = points[1][0]
+            y2 = points[2][1]
+
+            height, width, x, y = self.calculate_coordinates(x1, x2, y1, y2)
+
+            shapedict = {
+                "label": shape["label"],
+                "coordinates": {
+                    "x": x,
+                    "y": y,
+                    "width": width,
+                    "height": height
+                }
+            }
+            outputimagedict["annotations"].append(shapedict)
+
+        # check if image already in output
+        exists = False
+        for i in range(0, len(outputdict)):
+            if outputdict[i]["image"] == outputimagedict["image"]:
+                exists = True
+                outputdict[i] = outputimagedict
+                break
+
+        if not exists:
+            outputdict.append(outputimagedict)
+
+        Path(self.outputfile).write_text(json.dumps(outputdict), ENCODE_METHOD)
+
+    def calculate_coordinates(self, x1, x2, y1, y2):
+        if x1 < x2:
+            xmin = x1
+            xmax = x2
+        else:
+            xmin = x2
+            xmax = x1
+        if y1 < y2:
+            ymin = y1
+            ymax = y2
+        else:
+            ymin = y2
+            ymax = y1
+        width = xmax - xmin
+        if width < 0:
+            width = width * -1
+        height = ymax - ymin
+        # x and y from center of rect
+        x = xmin + width / 2
+        y = ymin + height / 2
+        return height, width, x, y
+
+
+class CreateMLReader:
+    def __init__(self, jsonpath, filepath):
+        self.jsonpath = jsonpath
+        self.shapes = []
+        self.verified = False
+        self.filename = filepath.split("/")[-1:][0]
+        try:
+            self.parse_json()
+        except ValueError:
+            print("JSON decoding failed")
+
+    def parse_json(self):
+        with open(self.jsonpath, "r") as file:
+            inputdata = file.read()
+
+        outputdict = json.loads(inputdata)
+        self.verified = True
+
+        if len(self.shapes) > 0:
+            self.shapes = []
+        for image in outputdict:
+            if image["image"] == self.filename:
+                for shape in image["annotations"]:
+                    self.add_shape(shape["label"], shape["coordinates"])
+
+    def add_shape(self, label, bndbox):
+        xmin = bndbox["x"] - (bndbox["width"] / 2)
+        ymin = bndbox["y"] - (bndbox["height"] / 2)
+
+        xmax = bndbox["x"] + (bndbox["width"] / 2)
+        ymax = bndbox["y"] + (bndbox["height"] / 2)
+
+        points = [(xmin, ymin), (xmax, ymin), (xmax, ymax), (xmin, ymax)]
+        self.shapes.append((label, points, None, None, True))
+
+    def get_shapes(self):
+        return self.shapes

PPOCRLabel/libs/hashableQListWidgetItem.py

+# Copyright (c) <2015-Present> Tzutalin
+# Copyright (C) 2013  MIT, Computer Science and Artificial Intelligence Laboratory. Bryan Russell, Antonio Torralba,
+# William T. Freeman. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and
+# associated documentation files (the "Software"), to deal in the Software without restriction, including without
+# limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the
+# Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
+# The above copyright notice and this permission notice shall be included in all copies or substantial portions of
+# the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT
+# NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT
+# SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF
+# CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+# THE SOFTWARE.
+#!/usr/bin/env python
+# -*- coding: utf-8 -*-
+import sys
+try:
+    from PyQt5.QtGui import *
+    from PyQt5.QtCore import *
+    from PyQt5.QtWidgets import *
+except ImportError:
+    # needed for py3+qt4
+    # Ref:
+    # http://pyqt.sourceforge.net/Docs/PyQt4/incompatible_apis.html
+    # http://stackoverflow.com/questions/21217399/pyqt4-qtcore-qvariant-object-instead-of-a-string
+    if sys.version_info.major >= 3:
+        import sip
+        sip.setapi('QVariant', 2)
+    from PyQt4.QtGui import *
+    from PyQt4.QtCore import *
+
+# PyQt5: TypeError: unhashable type: 'QListWidgetItem'
+
+
+class HashableQListWidgetItem(QListWidgetItem):
+
+    def __init__(self, *args):
+        super(HashableQListWidgetItem, self).__init__(*args)
+
+    def __hash__(self):
+        return hash(id(self))

PPOCRLabel/libs/labelDialog.py

+# Copyright (c) <2015-Present> Tzutalin
+# Copyright (C) 2013  MIT, Computer Science and Artificial Intelligence Laboratory. Bryan Russell, Antonio Torralba,
+# William T. Freeman. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and
+# associated documentation files (the "Software"), to deal in the Software without restriction, including without
+# limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the
+# Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
+# The above copyright notice and this permission notice shall be included in all copies or substantial portions of
+# the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT
+# NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT
+# SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF
+# CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+# THE SOFTWARE.
+try:
+    from PyQt5.QtGui import *
+    from PyQt5.QtCore import *
+    from PyQt5.QtWidgets import *
+except ImportError:
+    from PyQt4.QtGui import *
+    from PyQt4.QtCore import *
+
+from libs.utils import newIcon, labelValidator
+
+BB = QDialogButtonBox
+
+
+class LabelDialog(QDialog):
+
+    def __init__(self, text="Enter object label", parent=None, listItem=None):
+        super(LabelDialog, self).__init__(parent)
+
+        self.edit = QLineEdit()  # OLD
+        # self.edit = QTextEdit()
+        self.edit.setText(text)
+        # self.edit.setValidator(labelValidator()) # 验证有效性
+        self.edit.editingFinished.connect(self.postProcess)
+
+        model = QStringListModel()
+        model.setStringList(listItem)
+        completer = QCompleter()
+        completer.setModel(model)
+        self.edit.setCompleter(completer)
+
+        layout = QVBoxLayout()
+        layout.addWidget(self.edit)
+        self.buttonBox = bb = BB(BB.Ok | BB.Cancel, Qt.Horizontal, self)
+        bb.button(BB.Ok).setIcon(newIcon('done'))
+        bb.button(BB.Cancel).setIcon(newIcon('undo'))
+        bb.accepted.connect(self.validate)
+        bb.rejected.connect(self.reject)
+        layout.addWidget(bb)
+
+        # if listItem is not None and len(listItem) > 0:
+        #     self.listWidget = QListWidget(self)
+        #     for item in listItem:
+        #         self.listWidget.addItem(item)
+        #     self.listWidget.itemClicked.connect(self.listItemClick)
+        #     self.listWidget.itemDoubleClicked.connect(self.listItemDoubleClick)
+        #     layout.addWidget(self.listWidget)
+
+        self.setLayout(layout)
+
+    def validate(self):
+        try:
+            if self.edit.text().trimmed():
+                self.accept()
+        except AttributeError:
+            # PyQt5: AttributeError: 'str' object has no attribute 'trimmed'
+            if self.edit.text().strip():
+                self.accept()
+
+    def postProcess(self):
+        try:
+            self.edit.setText(self.edit.text().trimmed())
+            # print(self.edit.text())
+        except AttributeError:
+            # PyQt5: AttributeError: 'str' object has no attribute 'trimmed'
+            self.edit.setText(self.edit.text())
+            print(self.edit.text())
+
+    def popUp(self, text='', move=True):
+        self.edit.setText(text)
+        self.edit.setSelection(0, len(text))
+        self.edit.setFocus(Qt.PopupFocusReason)
+        if move:
+            cursor_pos = QCursor.pos()
+            parent_bottomRight = self.parentWidget().geometry()
+            max_x = parent_bottomRight.x() + parent_bottomRight.width() - self.sizeHint().width()
+            max_y = parent_bottomRight.y() + parent_bottomRight.height() - self.sizeHint().height()
+            max_global = self.parentWidget().mapToGlobal(QPoint(max_x, max_y))
+            if cursor_pos.x() > max_global.x():
+                cursor_pos.setX(max_global.x())
+            if cursor_pos.y() > max_global.y():
+                cursor_pos.setY(max_global.y())
+            self.move(cursor_pos)
+        return self.edit.text() if self.exec_() else None
+
+    def listItemClick(self, tQListWidgetItem):
+        try:
+            text = tQListWidgetItem.text().trimmed()
+        except AttributeError:
+            # PyQt5: AttributeError: 'str' object has no attribute 'trimmed'
+            text = tQListWidgetItem.text().strip()
+        self.edit.setText(text)
+
+    def listItemDoubleClick(self, tQListWidgetItem):
+        self.listItemClick(tQListWidgetItem)
+        self.validate()

PPOCRLabel/libs/settings.py

+# Copyright (c) <2015-Present> Tzutalin
+# Copyright (C) 2013  MIT, Computer Science and Artificial Intelligence Laboratory. Bryan Russell, Antonio Torralba,
+# William T. Freeman. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and
+# associated documentation files (the "Software"), to deal in the Software without restriction, including without
+# limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the
+# Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
+# The above copyright notice and this permission notice shall be included in all copies or substantial portions of
+# the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT
+# NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT
+# SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF
+# CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+# THE SOFTWARE.
+
+import pickle
+import os
+import sys
+
+
+class Settings(object):
+    def __init__(self):
+        # Be default, the home will be in the same folder as labelImg
+        home = os.path.expanduser("~")
+        self.data = {}
+        # self.path = os.path.join(home, '.labelImgSettings.pkl')
+        self.path = os.path.join(home, '.autoOCRSettings.pkl')
+
+    def __setitem__(self, key, value):
+        self.data[key] = value
+
+    def __getitem__(self, key):
+        return self.data[key]
+
+    def get(self, key, default=None):
+        if key in self.data:
+            return self.data[key]
+        return default
+
+    def save(self):
+        if self.path:
+            with open(self.path, 'wb') as f:
+                pickle.dump(self.data, f, pickle.HIGHEST_PROTOCOL)
+                return True
+        return False
+
+    def load(self):
+        try:
+            if os.path.exists(self.path):
+                with open(self.path, 'rb') as f:
+                    self.data = pickle.load(f)
+                    return True
+        except:
+            print('Loading setting failed')
+        return False
+
+    def reset(self):
+        if os.path.exists(self.path):
+            os.remove(self.path)
+            print('Remove setting pkl file ${0}'.format(self.path))
+        self.data = {}
+        self.path = None

PPOCRLabel/libs/shape.py

+# Copyright (c) <2015-Present> Tzutalin
+# Copyright (C) 2013  MIT, Computer Science and Artificial Intelligence Laboratory. Bryan Russell, Antonio Torralba,
+# William T. Freeman. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and
+# associated documentation files (the "Software"), to deal in the Software without restriction, including without
+# limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the
+# Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
+# The above copyright notice and this permission notice shall be included in all copies or substantial portions of
+# the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT
+# NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT
+# SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF
+# CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+# THE SOFTWARE.
+#!/usr/bin/python
+# -*- coding: utf-8 -*-
+
+
+try:
+    from PyQt5.QtGui import *
+    from PyQt5.QtCore import *
+except ImportError:
+    from PyQt4.QtGui import *
+    from PyQt4.QtCore import *
+
+from libs.utils import distance
+import sys
+
+DEFAULT_LINE_COLOR = QColor(0, 255, 0, 128)
+DEFAULT_FILL_COLOR = QColor(255, 0, 0, 128)
+DEFAULT_SELECT_LINE_COLOR = QColor(255, 255, 255)
+DEFAULT_SELECT_FILL_COLOR = QColor(0, 128, 255, 155)
+DEFAULT_VERTEX_FILL_COLOR = QColor(0, 255, 0, 255)
+DEFAULT_HVERTEX_FILL_COLOR = QColor(255, 0, 0)
+MIN_Y_LABEL = 10
+
+
+class Shape(object):
+    P_SQUARE, P_ROUND = range(2)
+
+    MOVE_VERTEX, NEAR_VERTEX = range(2)
+
+    # The following class variables influence the drawing
+    # of _all_ shape objects.
+    line_color = DEFAULT_LINE_COLOR
+    fill_color = DEFAULT_FILL_COLOR
+    select_line_color = DEFAULT_SELECT_LINE_COLOR
+    select_fill_color = DEFAULT_SELECT_FILL_COLOR
+    vertex_fill_color = DEFAULT_VERTEX_FILL_COLOR
+    hvertex_fill_color = DEFAULT_HVERTEX_FILL_COLOR
+    point_type = P_ROUND
+    point_size = 8
+    scale = 1.0
+
+    def __init__(self, label=None, line_color=None, difficult=False, paintLabel=False):
+        self.label = label
+        self.points = []
+        self.fill = False
+        self.selected = False
+        self.difficult = difficult
+        self.paintLabel = paintLabel
+
+        self._highlightIndex = None
+        self._highlightMode = self.NEAR_VERTEX
+        self._highlightSettings = {
+            self.NEAR_VERTEX: (4, self.P_ROUND),
+            self.MOVE_VERTEX: (1.5, self.P_SQUARE),
+        }
+
+        self._closed = False
+
+        if line_color is not None:
+            # Override the class line_color attribute
+            # with an object attribute. Currently this
+            # is used for drawing the pending line a different color.
+            self.line_color = line_color
+
+    def close(self):
+        self._closed = True
+
+    def reachMaxPoints(self):
+        if len(self.points) >= 4:
+            return True
+        return False
+
+    def addPoint(self, point):
+        if not self.reachMaxPoints():
+            self.points.append(point)
+
+    def popPoint(self):
+        if self.points:
+            return self.points.pop()
+        return None
+
+    def isClosed(self):
+        return self._closed
+
+    def setOpen(self):
+        self._closed = False
+
+    def paint(self, painter):
+        if self.points:
+            color = self.select_line_color if self.selected else self.line_color
+            pen = QPen(color)
+            # Try using integer sizes for smoother drawing(?)
+            pen.setWidth(max(1, int(round(2.0 / self.scale))))
+            painter.setPen(pen)
+
+            line_path = QPainterPath()
+            vrtx_path = QPainterPath()
+
+            line_path.moveTo(self.points[0])
+            # Uncommenting the following line will draw 2 paths
+            # for the 1st vertex, and make it non-filled, which
+            # may be desirable.
+            #self.drawVertex(vrtx_path, 0)
+
+            for i, p in enumerate(self.points):
+                line_path.lineTo(p)
+                self.drawVertex(vrtx_path, i)
+            if self.isClosed():
+                line_path.lineTo(self.points[0])
+
+            painter.drawPath(line_path)
+            painter.drawPath(vrtx_path)
+            painter.fillPath(vrtx_path, self.vertex_fill_color)
+
+            # Draw text at the top-left
+            if self.paintLabel:
+                min_x = sys.maxsize
+                min_y = sys.maxsize
+                for point in self.points:
+                    min_x = min(min_x, point.x())
+                    min_y = min(min_y, point.y())
+                if min_x != sys.maxsize and min_y != sys.maxsize:
+                    font = QFont()
+                    font.setPointSize(8)
+                    font.setBold(True)
+                    painter.setFont(font)
+                    if(self.label == None):
+                        self.label = ""
+                    if(min_y < MIN_Y_LABEL):
+                        min_y += MIN_Y_LABEL
+                    painter.drawText(min_x, min_y, self.label)
+
+            if self.fill:
+                color = self.select_fill_color if self.selected else self.fill_color
+                painter.fillPath(line_path, color)
+
+    def drawVertex(self, path, i):
+        d = self.point_size / self.scale
+        shape = self.point_type
+        point = self.points[i]
+        if i == self._highlightIndex:
+            size, shape = self._highlightSettings[self._highlightMode]
+            d *= size
+        if self._highlightIndex is not None:
+            self.vertex_fill_color = self.hvertex_fill_color
+        else:
+            self.vertex_fill_color = Shape.vertex_fill_color
+        if shape == self.P_SQUARE:
+            path.addRect(point.x() - d / 2, point.y() - d / 2, d, d)
+        elif shape == self.P_ROUND:
+            path.addEllipse(point, d / 2.0, d / 2.0)
+        else:
+            assert False, "unsupported vertex shape"
+
+    def nearestVertex(self, point, epsilon):
+        for i, p in enumerate(self.points):
+            if distance(p - point) <= epsilon:
+                return i
+        return None
+
+    def containsPoint(self, point):
+        return self.makePath().contains(point)
+
+    def makePath(self):
+        path = QPainterPath(self.points[0])
+        for p in self.points[1:]:
+            path.lineTo(p)
+        return path
+
+    def boundingRect(self):
+        return self.makePath().boundingRect()
+
+    def moveBy(self, offset):
+        self.points = [p + offset for p in self.points]
+
+    def moveVertexBy(self, i, offset):
+        self.points[i] = self.points[i] + offset
+
+    def highlightVertex(self, i, action):
+        self._highlightIndex = i
+        self._highlightMode = action
+
+    def highlightClear(self):
+        self._highlightIndex = None
+
+    def copy(self):
+        shape = Shape("%s" % self.label)
+        shape.points = [p for p in self.points]
+        shape.fill = self.fill
+        shape.selected = self.selected
+        shape._closed = self._closed
+        if self.line_color != Shape.line_color:
+            shape.line_color = self.line_color
+        if self.fill_color != Shape.fill_color:
+            shape.fill_color = self.fill_color
+        shape.difficult = self.difficult
+        return shape
+
+    def __len__(self):
+        return len(self.points)
+
+    def __getitem__(self, key):
+        return self.points[key]
+
+    def __setitem__(self, key, value):
+        self.points[key] = value

PPOCRLabel/libs/stringBundle.py

+# Copyright (c) <2015-Present> Tzutalin
+# Copyright (C) 2013  MIT, Computer Science and Artificial Intelligence Laboratory. Bryan Russell, Antonio Torralba,
+# William T. Freeman. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and
+# associated documentation files (the "Software"), to deal in the Software without restriction, including without
+# limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the
+# Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
+# The above copyright notice and this permission notice shall be included in all copies or substantial portions of
+# the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT
+# NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT
+# SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF
+# CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+# THE SOFTWARE.
+
+#!/usr/bin/env python
+# -*- coding: utf-8 -*-
+import re
+import os
+import sys
+import locale
+from libs.ustr import ustr
+
+try:
+    from PyQt5.QtCore import *
+except ImportError:
+    if sys.version_info.major >= 3:
+        import sip
+        sip.setapi('QVariant', 2)
+    from PyQt4.QtCore import *
+
+
+class StringBundle:
+
+    __create_key = object()
+
+    def __init__(self, create_key, localeStr):
+        assert(create_key == StringBundle.__create_key), "StringBundle must be created using StringBundle.getBundle"
+        self.idToMessage = {}
+        paths = self.__createLookupFallbackList(localeStr)
+        for path in paths:
+            self.__loadBundle(path)
+
+    @classmethod
+    def getBundle(cls, localeStr=None):
+        if localeStr is None:
+            try:
+                localeStr = locale.getlocale()[0] if locale.getlocale() and len(
+                    locale.getlocale()) > 0 else os.getenv('LANG')
+            except:
+                print('Invalid locale')
+                localeStr = 'en'
+
+        return StringBundle(cls.__create_key, localeStr)
+
+    def getString(self, stringId):
+        assert(stringId in self.idToMessage), "Missing string id : " + stringId
+        return self.idToMessage[stringId]
+
+    def __createLookupFallbackList(self, localeStr):
+        resultPaths = []
+        basePath = ":/strings"
+        resultPaths.append(basePath)
+        if localeStr is not None:
+            # Don't follow standard BCP47. Simple fallback
+            tags = re.split('[^a-zA-Z]', localeStr)
+            for tag in tags:
+                lastPath = resultPaths[-1]
+                resultPaths.append(lastPath + '-' + tag)
+
+        return resultPaths
+
+    def __loadBundle(self, path):
+        PROP_SEPERATOR = '='
+        f = QFile(path)
+        if f.exists():
+            if f.open(QIODevice.ReadOnly | QFile.Text):
+                text = QTextStream(f)
+                text.setCodec("UTF-8")
+
+            while not text.atEnd():
+                line = ustr(text.readLine())
+                key_value = line.split(PROP_SEPERATOR)
+                key = key_value[0].strip()
+                value = PROP_SEPERATOR.join(key_value[1:]).strip().strip('"')
+                self.idToMessage[key] = value
+
+            f.close()

PPOCRLabel/libs/toolBar.py

+# Copyright (c) <2015-Present> Tzutalin
+# Copyright (C) 2013  MIT, Computer Science and Artificial Intelligence Laboratory. Bryan Russell, Antonio Torralba,
+# William T. Freeman. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and
+# associated documentation files (the "Software"), to deal in the Software without restriction, including without
+# limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the
+# Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
+# The above copyright notice and this permission notice shall be included in all copies or substantial portions of
+# the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT
+# NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT
+# SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF
+# CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+# THE SOFTWARE.
+try:
+    from PyQt5.QtGui import *
+    from PyQt5.QtCore import *
+    from PyQt5.QtWidgets import *
+except ImportError:
+    from PyQt4.QtGui import *
+    from PyQt4.QtCore import *
+
+
+class ToolBar(QToolBar):
+
+    def __init__(self, title):
+        super(ToolBar, self).__init__(title)
+        layout = self.layout()
+        m = (0, 0, 0, 0)
+        layout.setSpacing(0)
+        layout.setContentsMargins(*m)
+        self.setContentsMargins(*m)
+        self.setWindowFlags(self.windowFlags() | Qt.FramelessWindowHint)
+
+    def addAction(self, action):
+        if isinstance(action, QWidgetAction):
+            return super(ToolBar, self).addAction(action)
+        btn = ToolButton()
+        btn.setDefaultAction(action)
+        btn.setToolButtonStyle(self.toolButtonStyle())
+        self.addWidget(btn)
+
+
+class ToolButton(QToolButton):
+    """ToolBar companion class which ensures all buttons have the same size."""
+    minSize = (60, 60)
+
+    def minimumSizeHint(self):
+        ms = super(ToolButton, self).minimumSizeHint()
+        w1, h1 = ms.width(), ms.height()
+        w2, h2 = self.minSize
+        ToolButton.minSize = max(w1, w2), max(h1, h2)
+        return QSize(*ToolButton.minSize)

PPOCRLabel/libs/ustr.py

+# Copyright (c) <2015-Present> Tzutalin
+# Copyright (C) 2013  MIT, Computer Science and Artificial Intelligence Laboratory. Bryan Russell, Antonio Torralba,
+# William T. Freeman. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and
+# associated documentation files (the "Software"), to deal in the Software without restriction, including without
+# limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the
+# Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
+# The above copyright notice and this permission notice shall be included in all copies or substantial portions of
+# the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT
+# NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT
+# SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF
+# CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+# THE SOFTWARE.
+import sys
+from libs.constants import DEFAULT_ENCODING
+
+def ustr(x):
+    '''py2/py3 unicode helper'''
+
+    if sys.version_info < (3, 0, 0):
+        from PyQt4.QtCore import QString
+        if type(x) == str:
+            return x.decode(DEFAULT_ENCODING)
+        if type(x) == QString:
+            #https://blog.csdn.net/friendan/article/details/51088476
+            #https://blog.csdn.net/xxm524/article/details/74937308
+            return unicode(x.toUtf8(), DEFAULT_ENCODING, 'ignore')
+        return x
+    else:
+        return x

PPOCRLabel/libs/utils.py

+# Copyright (c) <2015-Present> Tzutalin
+# Copyright (C) 2013  MIT, Computer Science and Artificial Intelligence Laboratory. Bryan Russell, Antonio Torralba,
+# William T. Freeman. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and
+# associated documentation files (the "Software"), to deal in the Software without restriction, including without
+# limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the
+# Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
+# The above copyright notice and this permission notice shall be included in all copies or substantial portions of
+# the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT
+# NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT
+# SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF
+# CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+# THE SOFTWARE.
+from math import sqrt
+from libs.ustr import ustr
+import hashlib
+import re
+import sys
+import cv2
+import numpy as np
+
+try:
+    from PyQt5.QtGui import *
+    from PyQt5.QtCore import *
+    from PyQt5.QtWidgets import *
+except ImportError:
+    from PyQt4.QtGui import *
+    from PyQt4.QtCore import *
+
+
+def newIcon(icon, iconSize=None):
+    if iconSize is not None:
+        return QIcon(QIcon(':/' + icon).pixmap(iconSize,iconSize))
+    else:
+        return QIcon(':/' + icon)
+
+
+def newButton(text, icon=None, slot=None):
+    b = QPushButton(text)
+    if icon is not None:
+        b.setIcon(newIcon(icon))
+    if slot is not None:
+        b.clicked.connect(slot)
+    return b
+
+
+def newAction(parent, text, slot=None, shortcut=None, icon=None,
+              tip=None, checkable=False, enabled=True, iconSize=None):
+    """Create a new action and assign callbacks, shortcuts, etc."""
+    a = QAction(text, parent)
+    if icon is not None:
+        if iconSize is not None:
+            a.setIcon(newIcon(icon, iconSize))
+        else:
+            a.setIcon(newIcon(icon))
+    if shortcut is not None:
+        if isinstance(shortcut, (list, tuple)):
+            a.setShortcuts(shortcut)
+        else:
+            a.setShortcut(shortcut)
+    if tip is not None:
+        a.setToolTip(tip)
+        a.setStatusTip(tip)
+    if slot is not None:
+        a.triggered.connect(slot)
+    if checkable:
+        a.setCheckable(True)
+    a.setEnabled(enabled)
+    return a
+
+
+def addActions(widget, actions):
+    for action in actions:
+        if action is None:
+            widget.addSeparator()
+        elif isinstance(action, QMenu):
+            widget.addMenu(action)
+        else:
+            widget.addAction(action)
+
+
+def labelValidator():
+    return QRegExpValidator(QRegExp(r'^[^ \t].+'), None)
+
+
+class struct(object):
+
+    def __init__(self, **kwargs):
+        self.__dict__.update(kwargs)
+
+
+def distance(p):
+    return sqrt(p.x() * p.x() + p.y() * p.y())
+
+
+def fmtShortcut(text):
+    mod, key = text.split('+', 1)
+    return '<b>%s</b>+<b>%s</b>' % (mod, key)
+
+
+def generateColorByText(text):
+    s = ustr(text)
+    hashCode = int(hashlib.sha256(s.encode('utf-8')).hexdigest(), 16)
+    r = int((hashCode / 255) % 255)
+    g = int((hashCode / 65025)  % 255)
+    b = int((hashCode / 16581375)  % 255)
+    return QColor(r, g, b, 100)
+
+def have_qstring():
+    '''p3/qt5 get rid of QString wrapper as py3 has native unicode str type'''
+    return not (sys.version_info.major >= 3 or QT_VERSION_STR.startswith('5.'))
+
+def util_qt_strlistclass():
+    return QStringList if have_qstring() else list
+
+def natural_sort(list, key=lambda s:s):
+    """
+    Sort the list into natural alphanumeric order.
+    """
+    def get_alphanum_key_func(key):
+        convert = lambda text: int(text) if text.isdigit() else text
+        return lambda s: [convert(c) for c in re.split('([0-9]+)', key(s))]
+    sort_key = get_alphanum_key_func(key)
+    list.sort(key=sort_key)
+
+
+def get_rotate_crop_image(img, points):
+
+    try:
+        img_crop_width = int(
+            max(
+                np.linalg.norm(points[0] - points[1]),
+                np.linalg.norm(points[2] - points[3])))
+        img_crop_height = int(
+            max(
+                np.linalg.norm(points[0] - points[3]),
+                np.linalg.norm(points[1] - points[2])))
+        pts_std = np.float32([[0, 0], [img_crop_width, 0],
+                              [img_crop_width, img_crop_height],
+                              [0, img_crop_height]])
+        M = cv2.getPerspectiveTransform(points, pts_std)
+        dst_img = cv2.warpPerspective(
+            img,
+            M, (img_crop_width, img_crop_height),
+            borderMode=cv2.BORDER_REPLICATE,
+            flags=cv2.INTER_CUBIC)
+        dst_img_height, dst_img_width = dst_img.shape[0:2]
+        if dst_img_height * 1.0 / dst_img_width >= 1.5:
+            dst_img = np.rot90(dst_img)
+        return dst_img
+    except Exception as e:
+        print(e)
+
+def stepsInfo(lang='en'):
+    if lang == 'ch':
+        msg = "1. 安装与运行：使用上述命令安装与运行程序。\n" \
+              "2. 打开文件夹：在菜单栏点击 “文件” - 打开目录 选择待标记图片的文件夹.\n"\
+              "3. 自动标注：点击 ”自动标注“，使用PPOCR超轻量模型对图片文件名前图片状态为 “X” 的图片进行自动标注。\n" \
+              "4. 手动标注：点击 “矩形标注”（推荐直接在英文模式下点击键盘中的 “W”)，用户可对当前图片中模型未检出的部分进行手动" \
+              "绘制标记框。点击键盘P，则使用四点标注模式（或点击“编辑” - “四点标注”），用户依次点击4个点后，双击左键表示标注完成。\n" \
+              "5. 标记框绘制完成后，用户点击 “确认”，检测框会先被预分配一个 “待识别” 标签。\n" \
+              "6. 重新识别：将图片中的所有检测画绘制/调整完成后，点击 “重新识别”，PPOCR模型会对当前图片中的**所有检测框**重新识别。\n" \
+              "7. 内容更改：双击识别结果，对不准确的识别结果进行手动更改。\n" \
+              "8. 保存：点击 “保存”，图片状态切换为 “√”，跳转至下一张。\n" \
+              "9. 删除：点击 “删除图像”，图片将会被删除至回收站。\n" \
+              "10. 标注结果：关闭应用程序或切换文件路径后，手动保存过的标签将会被存放在所打开图片文件夹下的" \
+              "*Label.txt*中。在菜单栏点击 “PaddleOCR” - 保存识别结果后，会将此类图片的识别训练数据保存在*crop_img*文件夹下，" \
+              "识别标签保存在*rec_gt.txt*中。\n"
+    else:
+        msg = "1. Build and launch using the instructions above.\n" \
+              "2. Click 'Open Dir' in Menu/File to select the folder of the picture.\n"\
+              "3. Click 'Auto recognition', use PPOCR model to automatically annotate images which marked with 'X' before the file name."\
+              "4. Create Box:\n"\
+                   "4.1 Click 'Create RectBox' or press 'W' in English keyboard mode to draw a new rectangle detection box. Click and release left mouse to select a region to annotate the text area.\n"\
+                   "4.2 Press 'P' to enter four-point labeling mode which enables you to create any four-point shape by clicking four points with the left mouse button in succession and DOUBLE CLICK the left mouse as the signal of labeling completion.\n"\
+              "5. After the marking frame is drawn, the user clicks 'OK', and the detection frame will be pre-assigned a TEMPORARY label.\n"\
+              "6. Click re-Recognition, model will rewrite ALL recognition results in ALL detection box.\n"\
+              "7. Double click the result in 'recognition result' list to manually change inaccurate recognition results.\n"\
+              "8. Click 'Save', the image status will switch to '√',then the program automatically jump to the next.\n"\
+              "9. Click 'Delete Image' and the image will be deleted to the recycle bin.\n"\
+              "10. Labeling result: After closing the application or switching the file path, the manually saved label will be stored in *Label.txt* under the opened picture folder.\n"\
+              "    Click PaddleOCR-Save Recognition Results in the menu bar, the recognition training data of such pictures will be saved in the *crop_img* folder, and the recognition label will be saved in *rec_gt.txt*.\n"
+    return msg
\ No newline at end of file

PPOCRLabel/libs/zoomWidget.py

+# Copyright (c) <2015-Present> Tzutalin
+# Copyright (C) 2013  MIT, Computer Science and Artificial Intelligence Laboratory. Bryan Russell, Antonio Torralba,
+# William T. Freeman. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and
+# associated documentation files (the "Software"), to deal in the Software without restriction, including without
+# limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the
+# Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
+# The above copyright notice and this permission notice shall be included in all copies or substantial portions of
+# the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT
+# NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT
+# SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF
+# CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+# THE SOFTWARE.
+try:
+    from PyQt5.QtGui import *
+    from PyQt5.QtCore import *
+    from PyQt5.QtWidgets import *
+except ImportError:
+    from PyQt4.QtGui import *
+    from PyQt4.QtCore import *
+
+
+class ZoomWidget(QSpinBox):
+
+    def __init__(self, value=100):
+        super(ZoomWidget, self).__init__()
+        self.setButtonSymbols(QAbstractSpinBox.NoButtons)
+        self.setRange(1, 500)
+        self.setSuffix(' %')
+        self.setValue(value)
+        self.setToolTip(u'Zoom Level')
+        self.setStatusTip(self.toolTip())
+        self.setAlignment(Qt.AlignCenter)
+
+    def minimumSizeHint(self):
+        height = super(ZoomWidget, self).minimumSizeHint().height()
+        fm = QFontMetrics(self.font())
+        width = fm.width(str(self.maximum()))
+        return QSize(width, height)

PPOCRLabel/requirements/requirements-linux-python3.txt

+pyqt5==5.10.1
+lxml==4.2.4

PPOCRLabel/resources.qrc

+<!DOCTYPE RCC><RCC version="1.0">
+<qresource>
+
+<file alias="help">resources/icons/help.png</file>
+<file alias="app">resources/icons/app.png</file>
+<file alias="Auto">resources/icons/Auto.png</file>
+<file alias="reRec">resources/icons/reRec.png</file>
+<file alias="expert">resources/icons/expert2.png</file>
+<file alias="done">resources/icons/done.png</file>
+<file alias="file">resources/icons/file.png</file>
+<file alias="labels">resources/icons/labels.png</file>
+<file alias="new">resources/icons/objects.png</file>
+<file alias="close">resources/icons/close.png</file>
+<file alias="fit-width">resources/icons/fit-width.png</file>
+<file alias="fit-window">resources/icons/fit-window.png</file>
+<file alias="undo">resources/icons/undo.png</file>
+<file alias="hide">resources/icons/eye.png</file>
+<file alias="quit">resources/icons/quit.png</file>
+<file alias="copy">resources/icons/copy.png</file>
+<file alias="edit">resources/icons/edit.png</file>
+<file alias="open">resources/icons/open.png</file>
+<file alias="save">resources/icons/save.png</file>
+<file alias="format_voc">resources/icons/format_voc.png</file>
+<file alias="format_yolo">resources/icons/format_yolo.png</file>
+<file alias="save-as">resources/icons/save-as.png</file>
+<file alias="color">resources/icons/color.png</file>
+<file alias="color_line">resources/icons/color_line.png</file>
+<file alias="zoom">resources/icons/zoom.png</file>
+<file alias="zoom-in">resources/icons/zoom-in.png</file>
+<file alias="zoom-out">resources/icons/zoom-out.png</file>
+<file alias="delete">resources/icons/cancel.png</file>
+<file alias="next">resources/icons/next.png</file>
+<file alias="prev">resources/icons/prev.png</file>
+<file alias="resetall">resources/icons/resetall.png</file>
+<file alias="verify">resources/icons/verify.png</file>
+<file alias="strings">resources/strings/strings.properties</file>
+<file alias="strings-zh-CN">resources/strings/strings-zh-CN.properties</file>
+</qresource>
+</RCC>

PPOCRLabel/resources/icons/app.svg

+<?xml version="1.0" encoding="UTF-8"?>
+<svg width="200px" height="200px" viewBox="0 0 200 200" version="1.1" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink">
+    <title>APPicon备份 3@2x</title>
+    <defs>
+        <linearGradient x1="50%" y1="0%" x2="50%" y2="100%" id="linearGradient-1">
+            <stop stop-color="#A5ACFF" offset="0%"></stop>
+            <stop stop-color="#545DFF" offset="100%"></stop>
+        </linearGradient>
+    </defs>
+    <g id="APPicon备份-3" stroke="none" stroke-width="1" fill="none" fill-rule="evenodd">
+        <g id="编组-3备份-2" fill="url(#linearGradient-1)">
+            <rect id="矩形" x="0" y="0" width="200" height="200" rx="4"></rect>
+        </g>
+        <g id="编组-4备份" transform="translate(11.000000, 11.000000)">
+            <polyline id="路径" stroke="#FFFFFF" stroke-width="6" stroke-linecap="round" stroke-linejoin="round" points="104 167 11 167 11 11 167 11 167 96.7728865"></polyline>
+            <circle id="椭圆形" fill="#FFFFFF" cx="167" cy="11" r="11"></circle>
+            <circle id="椭圆形备份-8" fill="#FFFFFF" cx="11" cy="11" r="11"></circle>
+            <circle id="椭圆形备份-9" fill="#FFFFFF" cx="11" cy="167" r="11"></circle>
+        </g>
+        <path d="M85.9991492,141 L69,141 L69,60 L97.061099,60.0005168 C106.622339,60.0180588 113.008403,60.4807625 115.775763,61.1684309 C120.478388,62.336394 124.240393,64.9067781 127.297375,69.1122872 C130.353887,73.08404 132,78.4580969 132,84.7663606 C132,89.6731387 131.059499,93.8786478 129.413268,97.1497163 C127.767626,100.420785 125.416373,103.224458 122.594751,105.09369 C119.773129,106.962805 116.951625,108.364641 114.130121,108.83192 C110.367998,109.766594 104.724872,110 97.4355156,110 L97.4355156,110 L85.999,110 L85.9991492,141 Z M86,74.2965717 L85.9299926,74.2965717 L85.929,96.849 L95.7229134,96.8497738 C101.895297,96.8497738 106.289281,96.4080944 108.473591,95.739226 L108.655396,95.681343 C110.771288,94.9806587 112.417401,93.5787054 113.828271,91.7095902 C115.239023,89.840475 115.709274,87.7373697 115.709274,85.4009757 C115.709274,82.3637805 114.768772,80.0273866 113.122542,78.1581545 C111.476782,76.2890393 109.125646,75.1206084 106.538915,74.6533297 C104.879206,74.2409217 101.572085,74.1924031 96.7786667,74.186695 L95.8002135,74.1860291 C95.4674884,74.1859339 95.1282054,74.1859339 94.7824121,74.1859339 L86,74.185 L86,74.2965717 Z" id="形状结合" fill="#FFFFFF"></path>
+        <g id="编组" transform="translate(158.000000, 153.000000) rotate(65.000000) translate(-158.000000, -153.000000) translate(126.000000, 113.000000)">
+            <path d="M32,8 C14.326888,8 0,22.326888 0,40 C0,49.0801087 3.78188139,57.2769117 9.85641113,63.1011759 M32,72 C49.673112,72 64,57.673112 64,40 C64,30.9865538 60.2734449,22.8434911 54.2770078,17.0274853" id="形状备份-2" stroke="#FFFFFF" stroke-width="5" stroke-linecap="round"></path>
+            <polygon id="三角形备份-3" fill="#FFFFFF" transform="translate(38.000000, 8.000000) scale(-1, 1) rotate(-90.000000) translate(-38.000000, -8.000000) " points="38 2 46 14 30 14"></polygon>
+            <polygon id="三角形备份-4" fill="#FFFFFF" transform="translate(26.000000, 72.000000) rotate(-90.000000) translate(-26.000000, -72.000000) " points="26 66 34 78 18 78"></polygon>
+        </g>
+    </g>
+</svg>
\ No newline at end of file

PPOCRLabel/resources/strings/strings-zh-CN.properties

+saveAsDetail=將标签保存到其他文件
+changeSaveDir=改变存放目录
+openFile=打开文件
+shapeLineColorDetail=更改线条颜色
+resetAll=重置界面与保存地址
+crtBox=矩形标注
+crtBoxDetail=创建一个新的区块
+dupBoxDetail=复制区块
+verifyImg=验证图像
+zoominDetail=放大
+verifyImgDetail=验证图像
+saveDetail=保存标签文件
+openFileDetail=打开图像文件
+fitWidthDetail=调整宽度适应到窗口宽度
+tutorial=PaddleOCR地址
+editLabel=编辑标签
+openAnnotationDetail=打开标签文件
+quit=退出
+shapeFillColorDetail=更改填充颜色
+closeCurDetail=关闭当前文件
+closeCur=关闭文件
+deleteImg=删除图像
+deleteImgDetail=删除当前图像
+fitWin=调整到窗口大小
+delBox=删除选择的区块
+boxLineColorDetail=选择线框颜色
+originalsize=原始大小
+resetAllDetail=重置所有设定
+zoomoutDetail=放大画面
+save=确认
+saveAs=另存为
+fitWinDetail=缩放到当前窗口大小
+openDir=打开目录
+copyPrevBounding=复制当前图像中的上一个边界框
+showHide=显示/隐藏标签
+changeSaveFormat=更改存储格式
+shapeFillColor=填充颜色
+quitApp=退出程序
+dupBox=复制区块
+delBoxDetail=删除区块
+zoomin=放大画面
+info=信息
+openAnnotation=开启标签
+prevImgDetail=上一个图像
+fitWidth=缩放到跟当前画面一样宽
+zoomout=缩小画面
+changeSavedAnnotationDir=更改保存标签文件的预设目录
+nextImgDetail=下一个图像
+originalsizeDetail=放大到原始大小
+prevImg=上一张
+tutorialDetail=显示示范内容
+shapeLineColor=形状线条颜色
+boxLineColor=区块线条颜色
+editLabelDetail=修改当前所选的区块颜色
+nextImg=下一张
+useDefaultLabel=使用预设标签
+useDifficult=有难度的
+boxLabelText=区块的标签
+labels=标签
+autoSaveMode=自动保存模式
+singleClsMode=单一类别模式
+displayLabel=显示类别
+fileList=文件列表
+files=文件
+advancedMode=专家模式
+advancedModeDetail=切换到专家模式
+showAllBoxDetail=显示所有区块
+hideAllBoxDetail=隐藏所有区块
+annoPanel=标注面板
+anno=标注
+addNewBbox=新框
+reLabel=重标注
+choosemodel=选择模型
+tipchoosemodel=选择OCR模型
+ImageResize=图片缩放
+IR=图片缩放
+autoRecognition=自动标注
+reRecognition=重新识别
+mfile=文件
+medit=编辑
+mview=视图
+mhelp=帮助
+iconList=缩略图
+detectionBoxposition=检测框位置
+recognitionResult=识别结果
+creatPolygon=四点标注
+drawSquares=正方形标注
+saveRec=保存识别结果
+tempLabel=待识别
+steps=操作步骤
+choseModelLg=选择模型语言
+cancel=取消
+ok=确认
+autolabeling=自动标注中
+hideBox=隐藏所有标注
+showBox=显示所有标注
+saveLabel=保存标记结果
\ No newline at end of file

PPOCRLabel/resources/strings/strings-zh-TW.properties

+saveAsDetail=將標籤保存到其他文件
+changeSaveDir=改變存放目錄
+openFile=開啟檔案
+shapeLineColorDetail=更改線條顏色
+resetAll=重置
+crtBox=創建區塊
+crtBoxDetail=畫一個區塊
+dupBoxDetail=複製區塊
+verifyImg=驗證圖像
+zoominDetail=放大
+verifyImgDetail=驗證圖像
+saveDetail=將標籤存到
+openFileDetail=打開圖像
+fitWidthDetail=調整到窗口寬度
+tutorial=YouTube教學
+editLabel=編輯標籤
+openAnnotationDetail=打開標籤文件
+quit=結束
+shapeFillColorDetail=更改填充顏色
+closeCurDetail=關閉目前檔案
+closeCur=關閉
+deleteImg=刪除圖像
+deleteImgDetail=刪除目前圖像
+fitWin=調整到跟窗口一樣大小
+delBox=刪除選取區塊
+boxLineColorDetail=選擇框線顏色
+originalsize=原始大小
+resetAllDetail=重設所有設定
+zoomoutDetail=畫面放大
+save=儲存
+saveAs=另存為
+fitWinDetail=縮放到窗口一樣
+openDir=開啟目錄
+copyPrevBounding=複製當前圖像中的上一個邊界框
+showHide=顯示/隱藏標籤
+changeSaveFormat=更改儲存格式
+shapeFillColor=填充顏色
+quitApp=離開本程式
+dupBox=複製區塊
+delBoxDetail=刪除區塊
+zoomin=放大畫面
+info=資訊
+openAnnotation=開啟標籤
+prevImgDetail=上一個圖像
+fitWidth=縮放到跟畫面一樣寬
+zoomout=縮小畫面
+changeSavedAnnotationDir=更改預設標籤存的目錄
+nextImgDetail=下一個圖像
+originalsizeDetail=放大到原始大小
+prevImg=上一個圖像
+tutorialDetail=顯示示範內容
+shapeLineColor=形狀線條顏色
+boxLineColor=日期分隔線顏色
+editLabelDetail=修改所選區塊的標籤
+nextImg=下一張圖片
+useDefaultLabel=使用預設標籤
+useDifficult=有難度的
+boxLabelText=區塊的標籤
+labels=標籤
+autoSaveMode=自動儲存模式
+singleClsMode=單一類別模式
+displayLabel=顯示類別
+fileList=檔案清單
+files=檔案
+iconList=XX
+icon=XX
+advancedMode=進階模式
+advancedModeDetail=切到進階模式
+showAllBoxDetail=顯示所有區塊
+hideAllBoxDetail=隱藏所有區塊

PPOCRLabel/setup.cfg

+[bumpversion]
+commit = True
+tag = True
+
+[bumpversion:file:setup.py]
+
+[bdist_wheel]
+universal = 1