Merge pull request #3402 from SummerLife/add_stm32_h747_discovery

[bsp/stm32]  add STM32H747-DISCO BSP

.travis.yml

@@ -103,6 +103,7 @@ env:
   - RTT_BSP='stm32/stm32g431-st-nucleo' RTT_TOOL_CHAIN='sourcery-arm'
   - RTT_BSP='stm32/stm32h743-atk-apollo' RTT_TOOL_CHAIN='sourcery-arm'
   - RTT_BSP='stm32/stm32h743-st-nucleo' RTT_TOOL_CHAIN='sourcery-arm'
+  - RTT_BSP='stm32/stm32h747-st-discovery' RTT_TOOL_CHAIN='sourcery-arm'
   - RTT_BSP='stm32/stm32l4r9-st-eval' RTT_TOOL_CHAIN='sourcery-arm'
   - RTT_BSP='stm32/stm32l053-st-nucleo' RTT_TOOL_CHAIN='sourcery-arm'
   - RTT_BSP='stm32/stm32l432-st-nucleo' RTT_TOOL_CHAIN='sourcery-arm'

bsp/stm32/README.md

@@ -41,6 +41,7 @@ STM32 系列 BSP 目前支持情况如下表所示：
 | **H7 系列** |  |
 | [stm32h743-atk-apollo](stm32h743-atk-apollo) | 正点原子 h743 阿波罗开发板 |
 | [stm32h743-st-nucleo](stm32h743-st-nucleo) | ST 官方 STM32H743-nucleo 开发板 |
+| [stm32h747-st-discovery](stm32h747-st-discovery) | ST 官方 STM32H747I-discovery 开发板 |
 | **L0 系列** |  |
 | [stm32l053-st-nucleo](stm32l053-st-nucleo) | ST 官方 STM32L053-nucleo 开发板 |
 | **L4 系列** |  |

bsp/stm32/libraries/templates/stm32f7xx/board/SConscript

 import rtconfig
 from building import *
 
+Import('SDK_LIB')
+
 cwd = GetCurrentDir()
 
 # add the general drivers.
@@ -10,12 +12,14 @@ src += Glob('CubeMX_Config/Src/stm32f7xx_hal_msp.c')
 path = [cwd]
 path += [cwd + '/CubeMX_Config/Inc']
 
+startup_path_prefix = SDK_LIB
+
 if rtconfig.CROSS_TOOL == 'gcc':
-    src += [cwd + '/../../libraries/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Source/Templates/gcc/startup_stm32f767xx.s']
+    src += [startup_path_prefix + '/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Source/Templates/gcc/startup_stm32f767xx.s']
 elif rtconfig.CROSS_TOOL == 'keil':
-    src += [cwd + '/../../libraries/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Source/Templates/arm/startup_stm32f767xx.s']
+    src += [startup_path_prefix + '/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Source/Templates/arm/startup_stm32f767xx.s']
 elif rtconfig.CROSS_TOOL == 'iar':
-    src += [cwd + '/../../libraries/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Source/Templates/iar/startup_stm32f767xx.s']
+    src += [startup_path_prefix + '/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Source/Templates/iar/startup_stm32f767xx.s']
 
 # STM32F756xx || STM32F746xx || STM32F745xx || STM32F767xx  || 
 # STM32F769xx || STM32F777xx || STM32F779xx || STM32F722xx  || 

bsp/stm32/libraries/templates/stm32h7xx/board/SConscript

 import rtconfig
 from building import *
 
+Import('SDK_LIB')
+
 cwd = GetCurrentDir()
 
 # add the general drivers.
@@ -10,12 +12,14 @@ src += Glob('CubeMX_Config/Src/stm32h7xx_hal_msp.c')
 path = [cwd]
 path += [cwd + '/CubeMX_Config/Inc']
 
+startup_path_prefix = SDK_LIB
+
 if rtconfig.CROSS_TOOL == 'gcc':
-    src += [cwd + '/../../libraries/STM32H7xx_HAL/CMSIS/Device/ST/STM32H7xx/Source/Templates/gcc/startup_stm32h743xx.s']
+    src += [startup_path_prefix + '/STM32H7xx_HAL/CMSIS/Device/ST/STM32H7xx/Source/Templates/gcc/startup_stm32h743xx.s']
 elif rtconfig.CROSS_TOOL == 'keil':
-    src += [cwd + '/../../libraries/STM32H7xx_HAL/CMSIS/Device/ST/STM32H7xx/Source/Templates/arm/startup_stm32h743xx.s']
+    src += [startup_path_prefix + '/STM32H7xx_HAL/CMSIS/Device/ST/STM32H7xx/Source/Templates/arm/startup_stm32h743xx.s']
 elif rtconfig.CROSS_TOOL == 'iar':
-    src += [cwd + '/../../libraries/STM32H7xx_HAL/CMSIS/Device/ST/STM32H7xx/Source/Templates/iar/startup_stm32h743xx.s']
+    src += [startup_path_prefix + '/STM32H7xx_HAL/CMSIS/Device/ST/STM32H7xx/Source/Templates/iar/startup_stm32h743xx.s']
 
 # STM32H743xx || STM32H750xx || STM32F753xx
 # You can select chips from the list above

bsp/stm32/stm32f746-st-disco/board/SConscript

 import rtconfig
 from building import *
 
+Import('SDK_LIB')
+
 cwd = GetCurrentDir()
 
 # add the general drivers.
 src = Glob('board.c')
 src += Glob('CubeMX_Config/Src/stm32f7xx_hal_msp.c')
 
-
 if GetDepend(['BSP_USING_ETH']):
     src += Glob('ports/phy_reset.c')
 
@@ -21,12 +22,14 @@ path = [cwd]
 path += [cwd + '/CubeMX_Config/Inc']
 path += [cwd + '/ports']
 
+startup_path_prefix = SDK_LIB
+
 if rtconfig.CROSS_TOOL == 'gcc':
-    src += [cwd + '/../../libraries/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Source/Templates/gcc/startup_stm32f746xx.s']
+    src += [startup_path_prefix + '/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Source/Templates/gcc/startup_stm32f746xx.s']
 elif rtconfig.CROSS_TOOL == 'keil':
-    src += [cwd + '/../../libraries/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Source/Templates/arm/startup_stm32f746xx.s']
+    src += [startup_path_prefix + '/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Source/Templates/arm/startup_stm32f746xx.s']
 elif rtconfig.CROSS_TOOL == 'iar':
-    src += [cwd + '/../../libraries/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Source/Templates/iar/startup_stm32f746xx.s']
+    src += [startup_path_prefix + '/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Source/Templates/iar/startup_stm32f746xx.s']
 
 # STM32F756xx || STM32F746xx || STM32F745xx || STM32F767xx  || 
 # STM32F769xx || STM32F777xx || STM32F779xx || STM32F722xx  || 

bsp/stm32/stm32f767-st-nucleo/SConstruct

@@ -34,19 +34,27 @@ if rtconfig.PLATFORM == 'iar':
 Export('RTT_ROOT')
 Export('rtconfig')
 
+SDK_ROOT = os.path.abspath('./')
+
+if os.path.exists(SDK_ROOT + '/libraries'):
+    libraries_path_prefix = SDK_ROOT + '/libraries'
+else:
+    libraries_path_prefix = os.path.dirname(SDK_ROOT) + '/libraries'
+
+SDK_LIB = libraries_path_prefix
+Export('SDK_LIB')
+
 # prepare building environment
 objs = PrepareBuilding(env, RTT_ROOT, has_libcpu=False)
 
 stm32_library = 'STM32F7xx_HAL'
 rtconfig.BSP_LIBRARY_TYPE = stm32_library
 
-SDK_ROOT = os.path.abspath('./')
+# include libraries
+objs.extend(SConscript(os.path.join(libraries_path_prefix, stm32_library, 'SConscript')))
 
 # include drivers
-objs.extend(SConscript(os.path.dirname(SDK_ROOT) + '/libraries/STM32F7xx_HAL/SConscript'))
-
-# include libraries
-objs.extend(SConscript(os.path.dirname(SDK_ROOT) + '/libraries/HAL_Drivers/SConscript'))
+objs.extend(SConscript(os.path.join(libraries_path_prefix, 'HAL_Drivers', 'SConscript')))
 
 # make a building
 DoBuilding(TARGET, objs)

bsp/stm32/stm32f767-st-nucleo/board/SConscript

+import os
 import rtconfig
 from building import *
 
+Import('SDK_LIB')
+
 cwd = GetCurrentDir()
 
 # add the general drivers.
@@ -14,12 +17,14 @@ path = [cwd]
 path += [cwd + '/CubeMX_Config/Inc']
 path += [cwd + '/ports']
 
+startup_path_prefix = SDK_LIB
+
 if rtconfig.CROSS_TOOL == 'gcc':
-    src += [cwd + '/../../libraries/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Source/Templates/gcc/startup_stm32f767xx.s']
+    src += [startup_path_prefix + '/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Source/Templates/gcc/startup_stm32f767xx.s']
 elif rtconfig.CROSS_TOOL == 'keil':
-    src += [cwd + '/../../libraries/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Source/Templates/arm/startup_stm32f767xx.s']
+    src += [startup_path_prefix + '/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Source/Templates/arm/startup_stm32f767xx.s']
 elif rtconfig.CROSS_TOOL == 'iar':
-    src += [cwd + '/../../libraries/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Source/Templates/iar/startup_stm32f767xx.s']
+    src += [startup_path_prefix + '/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Source/Templates/iar/startup_stm32f767xx.s']
 
 # STM32F756xx || STM32F746xx || STM32F745xx || STM32F767xx  || 
 # STM32F769xx || STM32F777xx || STM32F779xx || STM32F722xx  || 

bsp/stm32/stm32f769-st-disco/board/SConscript

 import rtconfig
 from building import *
 
+Import('SDK_LIB')
+
 cwd = GetCurrentDir()
 
 # add the general drivers.
@@ -10,12 +12,14 @@ src += Glob('CubeMX_Config/Src/stm32f7xx_hal_msp.c')
 path = [cwd]
 path += [cwd + '/CubeMX_Config/Inc']
 
+startup_path_prefix = SDK_LIB
+
 if rtconfig.CROSS_TOOL == 'gcc':
-    src += [cwd + '/../../libraries/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Source/Templates/gcc/startup_stm32f767xx.s']
+    src += [startup_path_prefix + '/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Source/Templates/gcc/startup_stm32f767xx.s']
 elif rtconfig.CROSS_TOOL == 'keil':
-    src += [cwd + '/../../libraries/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Source/Templates/arm/startup_stm32f767xx.s']
+    src += [startup_path_prefix + '/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Source/Templates/arm/startup_stm32f767xx.s']
 elif rtconfig.CROSS_TOOL == 'iar':
-    src += [cwd + '/../../libraries/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Source/Templates/iar/startup_stm32f767xx.s']
+    src += [startup_path_prefix + '/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Source/Templates/iar/startup_stm32f767xx.s']
 
 # STM32F756xx || STM32F746xx || STM32F745xx || STM32F767xx  || 
 # STM32F769xx || STM32F777xx || STM32F779xx || STM32F722xx  || 

bsp/stm32/stm32h747-st-discovery/.config

+#
+# Automatically generated file; DO NOT EDIT.
+# RT-Thread Configuration
+#
+
+#
+# RT-Thread Kernel
+#
+CONFIG_RT_NAME_MAX=8
+# CONFIG_RT_USING_ARCH_DATA_TYPE is not set
+# CONFIG_RT_USING_SMP is not set
+CONFIG_RT_ALIGN_SIZE=4
+# CONFIG_RT_THREAD_PRIORITY_8 is not set
+CONFIG_RT_THREAD_PRIORITY_32=y
+# CONFIG_RT_THREAD_PRIORITY_256 is not set
+CONFIG_RT_THREAD_PRIORITY_MAX=32
+CONFIG_RT_TICK_PER_SECOND=1000
+CONFIG_RT_USING_OVERFLOW_CHECK=y
+CONFIG_RT_USING_HOOK=y
+CONFIG_RT_USING_IDLE_HOOK=y
+CONFIG_RT_IDLE_HOOK_LIST_SIZE=4
+CONFIG_IDLE_THREAD_STACK_SIZE=256
+# CONFIG_RT_USING_TIMER_SOFT is not set
+CONFIG_RT_DEBUG=y
+# CONFIG_RT_DEBUG_COLOR is not set
+# CONFIG_RT_DEBUG_INIT_CONFIG is not set
+# CONFIG_RT_DEBUG_THREAD_CONFIG is not set
+# CONFIG_RT_DEBUG_SCHEDULER_CONFIG is not set
+# CONFIG_RT_DEBUG_IPC_CONFIG is not set
+# CONFIG_RT_DEBUG_TIMER_CONFIG is not set
+# CONFIG_RT_DEBUG_IRQ_CONFIG is not set
+# CONFIG_RT_DEBUG_MEM_CONFIG is not set
+# CONFIG_RT_DEBUG_SLAB_CONFIG is not set
+# CONFIG_RT_DEBUG_MEMHEAP_CONFIG is not set
+# CONFIG_RT_DEBUG_MODULE_CONFIG is not set
+
+#
+# Inter-Thread communication
+#
+CONFIG_RT_USING_SEMAPHORE=y
+CONFIG_RT_USING_MUTEX=y
+CONFIG_RT_USING_EVENT=y
+CONFIG_RT_USING_MAILBOX=y
+CONFIG_RT_USING_MESSAGEQUEUE=y
+# CONFIG_RT_USING_SIGNALS is not set
+
+#
+# Memory Management
+#
+CONFIG_RT_USING_MEMPOOL=y
+# CONFIG_RT_USING_MEMHEAP is not set
+# CONFIG_RT_USING_NOHEAP is not set
+CONFIG_RT_USING_SMALL_MEM=y
+# CONFIG_RT_USING_SLAB is not set
+# CONFIG_RT_USING_MEMTRACE is not set
+CONFIG_RT_USING_HEAP=y
+
+#
+# Kernel Device Object
+#
+CONFIG_RT_USING_DEVICE=y
+# CONFIG_RT_USING_DEVICE_OPS is not set
+# CONFIG_RT_USING_INTERRUPT_INFO is not set
+CONFIG_RT_USING_CONSOLE=y
+CONFIG_RT_CONSOLEBUF_SIZE=128
+CONFIG_RT_CONSOLE_DEVICE_NAME="uart1"
+CONFIG_RT_VER_NUM=0x40003
+CONFIG_ARCH_ARM=y
+CONFIG_RT_USING_CPU_FFS=y
+CONFIG_ARCH_ARM_CORTEX_M=y
+CONFIG_ARCH_ARM_CORTEX_M7=y
+# CONFIG_ARCH_CPU_STACK_GROWS_UPWARD is not set
+
+#
+# RT-Thread Components
+#
+CONFIG_RT_USING_COMPONENTS_INIT=y
+CONFIG_RT_USING_USER_MAIN=y
+CONFIG_RT_MAIN_THREAD_STACK_SIZE=2048
+CONFIG_RT_MAIN_THREAD_PRIORITY=10
+
+#
+# C++ features
+#
+# CONFIG_RT_USING_CPLUSPLUS is not set
+
+#
+# Command shell
+#
+CONFIG_RT_USING_FINSH=y
+CONFIG_FINSH_THREAD_NAME="tshell"
+CONFIG_FINSH_USING_HISTORY=y
+CONFIG_FINSH_HISTORY_LINES=5
+CONFIG_FINSH_USING_SYMTAB=y
+CONFIG_FINSH_USING_DESCRIPTION=y
+# CONFIG_FINSH_ECHO_DISABLE_DEFAULT is not set
+CONFIG_FINSH_THREAD_PRIORITY=20
+CONFIG_FINSH_THREAD_STACK_SIZE=4096
+CONFIG_FINSH_CMD_SIZE=80
+# CONFIG_FINSH_USING_AUTH is not set
+CONFIG_FINSH_USING_MSH=y
+CONFIG_FINSH_USING_MSH_DEFAULT=y
+CONFIG_FINSH_USING_MSH_ONLY=y
+CONFIG_FINSH_ARG_MAX=10
+
+#
+# Device virtual file system
+#
+# CONFIG_RT_USING_DFS is not set
+
+#
+# Device Drivers
+#
+CONFIG_RT_USING_DEVICE_IPC=y
+CONFIG_RT_PIPE_BUFSZ=512
+# CONFIG_RT_USING_SYSTEM_WORKQUEUE is not set
+CONFIG_RT_USING_SERIAL=y
+CONFIG_RT_SERIAL_USING_DMA=y
+CONFIG_RT_SERIAL_RB_BUFSZ=64
+# CONFIG_RT_USING_CAN is not set
+# CONFIG_RT_USING_HWTIMER is not set
+# CONFIG_RT_USING_CPUTIME is not set
+# CONFIG_RT_USING_I2C is not set
+CONFIG_RT_USING_PIN=y
+# CONFIG_RT_USING_ADC is not set
+# CONFIG_RT_USING_PWM is not set
+# CONFIG_RT_USING_MTD_NOR is not set
+# CONFIG_RT_USING_MTD_NAND is not set
+# CONFIG_RT_USING_PM is not set
+# CONFIG_RT_USING_RTC is not set
+# CONFIG_RT_USING_SDIO is not set
+# CONFIG_RT_USING_SPI is not set
+# CONFIG_RT_USING_WDT is not set
+# CONFIG_RT_USING_AUDIO is not set
+# CONFIG_RT_USING_SENSOR is not set
+# CONFIG_RT_USING_TOUCH is not set
+# CONFIG_RT_USING_HWCRYPTO is not set
+# CONFIG_RT_USING_PULSE_ENCODER is not set
+# CONFIG_RT_USING_INPUT_CAPTURE is not set
+# CONFIG_RT_USING_WIFI is not set
+
+#
+# Using USB
+#
+# CONFIG_RT_USING_USB_HOST is not set
+# CONFIG_RT_USING_USB_DEVICE is not set
+
+#
+# POSIX layer and C standard library
+#
+# CONFIG_RT_USING_LIBC is not set
+# CONFIG_RT_USING_PTHREADS is not set
+CONFIG_RT_LIBC_USING_TIME=y
+
+#
+# Network
+#
+
+#
+# Socket abstraction layer
+#
+# CONFIG_RT_USING_SAL is not set
+
+#
+# Network interface device
+#
+# CONFIG_RT_USING_NETDEV is not set
+
+#
+# light weight TCP/IP stack
+#
+# CONFIG_RT_USING_LWIP is not set
+
+#
+# AT commands
+#
+# CONFIG_RT_USING_AT is not set
+
+#
+# VBUS(Virtual Software BUS)
+#
+# CONFIG_RT_USING_VBUS is not set
+
+#
+# Utilities
+#
+# CONFIG_RT_USING_RYM is not set
+# CONFIG_RT_USING_ULOG is not set
+# CONFIG_RT_USING_UTEST is not set
+# CONFIG_RT_USING_LWP is not set
+
+#
+# RT-Thread online packages
+#
+
+#
+# IoT - internet of things
+#
+# CONFIG_PKG_USING_PAHOMQTT is not set
+# CONFIG_PKG_USING_WEBCLIENT is not set
+# CONFIG_PKG_USING_WEBNET is not set
+# CONFIG_PKG_USING_MONGOOSE is not set
+# CONFIG_PKG_USING_WEBTERMINAL is not set
+# CONFIG_PKG_USING_CJSON is not set
+# CONFIG_PKG_USING_JSMN is not set
+# CONFIG_PKG_USING_LIBMODBUS is not set
+# CONFIG_PKG_USING_FREEMODBUS is not set
+# CONFIG_PKG_USING_LJSON is not set
+# CONFIG_PKG_USING_EZXML is not set
+# CONFIG_PKG_USING_NANOPB is not set
+
+#
+# Wi-Fi
+#
+
+#
+# Marvell WiFi
+#
+# CONFIG_PKG_USING_WLANMARVELL is not set
+
+#
+# Wiced WiFi
+#
+# CONFIG_PKG_USING_WLAN_WICED is not set
+# CONFIG_PKG_USING_RW007 is not set
+# CONFIG_PKG_USING_COAP is not set
+# CONFIG_PKG_USING_NOPOLL is not set
+# CONFIG_PKG_USING_NETUTILS is not set
+# CONFIG_PKG_USING_AT_DEVICE is not set
+# CONFIG_PKG_USING_ATSRV_SOCKET is not set
+# CONFIG_PKG_USING_WIZNET is not set
+
+#
+# IoT Cloud
+#
+# CONFIG_PKG_USING_ONENET is not set
+# CONFIG_PKG_USING_GAGENT_CLOUD is not set
+# CONFIG_PKG_USING_ALI_IOTKIT is not set
+# CONFIG_PKG_USING_AZURE is not set
+# CONFIG_PKG_USING_TENCENT_IOTHUB is not set
+# CONFIG_PKG_USING_JIOT-C-SDK is not set
+# CONFIG_PKG_USING_NIMBLE is not set
+# CONFIG_PKG_USING_OTA_DOWNLOADER is not set
+# CONFIG_PKG_USING_IPMSG is not set
+# CONFIG_PKG_USING_LSSDP is not set
+# CONFIG_PKG_USING_AIRKISS_OPEN is not set
+# CONFIG_PKG_USING_LIBRWS is not set
+# CONFIG_PKG_USING_TCPSERVER is not set
+# CONFIG_PKG_USING_PROTOBUF_C is not set
+# CONFIG_PKG_USING_ONNX_PARSER is not set
+# CONFIG_PKG_USING_ONNX_BACKEND is not set
+
+#
+# security packages
+#
+# CONFIG_PKG_USING_MBEDTLS is not set
+# CONFIG_PKG_USING_libsodium is not set
+# CONFIG_PKG_USING_TINYCRYPT is not set
+
+#
+# language packages
+#
+# CONFIG_PKG_USING_LUA is not set
+# CONFIG_PKG_USING_JERRYSCRIPT is not set
+# CONFIG_PKG_USING_MICROPYTHON is not set
+
+#
+# multimedia packages
+#
+# CONFIG_PKG_USING_OPENMV is not set
+# CONFIG_PKG_USING_MUPDF is not set
+# CONFIG_PKG_USING_STEMWIN is not set
+# CONFIG_PKG_USING_WAVPLAYER is not set
+# CONFIG_PKG_USING_TJPGD is not set
+
+#
+# tools packages
+#
+# CONFIG_PKG_USING_CMBACKTRACE is not set
+# CONFIG_PKG_USING_EASYFLASH is not set
+# CONFIG_PKG_USING_EASYLOGGER is not set
+# CONFIG_PKG_USING_SYSTEMVIEW is not set
+# CONFIG_PKG_USING_RDB is not set
+# CONFIG_PKG_USING_QRCODE is not set
+# CONFIG_PKG_USING_ULOG_EASYFLASH is not set
+# CONFIG_PKG_USING_ADBD is not set
+
+#
+# system packages
+#
+# CONFIG_PKG_USING_GUIENGINE is not set
+# CONFIG_PKG_USING_PERSIMMON is not set
+# CONFIG_PKG_USING_CAIRO is not set
+# CONFIG_PKG_USING_PIXMAN is not set
+# CONFIG_PKG_USING_LWEXT4 is not set
+# CONFIG_PKG_USING_PARTITION is not set
+# CONFIG_PKG_USING_FAL is not set
+# CONFIG_PKG_USING_SQLITE is not set
+# CONFIG_PKG_USING_RTI is not set
+# CONFIG_PKG_USING_LITTLEVGL2RTT is not set
+# CONFIG_PKG_USING_CMSIS is not set
+# CONFIG_PKG_USING_DFS_YAFFS is not set
+# CONFIG_PKG_USING_LITTLEFS is not set
+# CONFIG_PKG_USING_THREAD_POOL is not set
+# CONFIG_PKG_USING_ROBOTS is not set
+
+#
+# peripheral libraries and drivers
+#
+# CONFIG_PKG_USING_SENSORS_DRIVERS is not set
+# CONFIG_PKG_USING_REALTEK_AMEBA is not set
+# CONFIG_PKG_USING_SHT2X is not set
+# CONFIG_PKG_USING_STM32_SDIO is not set
+# CONFIG_PKG_USING_ICM20608 is not set
+# CONFIG_PKG_USING_U8G2 is not set
+# CONFIG_PKG_USING_BUTTON is not set
+# CONFIG_PKG_USING_PCF8574 is not set
+# CONFIG_PKG_USING_SX12XX is not set
+# CONFIG_PKG_USING_SIGNAL_LED is not set
+# CONFIG_PKG_USING_LEDBLINK is not set
+# CONFIG_PKG_USING_WM_LIBRARIES is not set
+# CONFIG_PKG_USING_KENDRYTE_SDK is not set
+# CONFIG_PKG_USING_INFRARED is not set
+# CONFIG_PKG_USING_ROSSERIAL is not set
+# CONFIG_PKG_USING_AT24CXX is not set
+# CONFIG_PKG_USING_MOTIONDRIVER2RTT is not set
+# CONFIG_PKG_USING_AD7746 is not set
+# CONFIG_PKG_USING_PCA9685 is not set
+# CONFIG_PKG_USING_I2C_TOOLS is not set
+# CONFIG_PKG_USING_NRF24L01 is not set
+# CONFIG_PKG_USING_TOUCH_DRIVERS is not set
+# CONFIG_PKG_USING_LCD_DRIVERS is not set
+# CONFIG_PKG_USING_MAX17048 is not set
+
+#
+# miscellaneous packages
+#
+# CONFIG_PKG_USING_LIBCSV is not set
+# CONFIG_PKG_USING_OPTPARSE is not set
+# CONFIG_PKG_USING_FASTLZ is not set
+# CONFIG_PKG_USING_MINILZO is not set
+# CONFIG_PKG_USING_QUICKLZ is not set
+# CONFIG_PKG_USING_MULTIBUTTON is not set
+# CONFIG_PKG_USING_FLEXIBLE_BUTTON is not set
+# CONFIG_PKG_USING_CANFESTIVAL is not set
+# CONFIG_PKG_USING_ZLIB is not set
+# CONFIG_PKG_USING_DSTR is not set
+# CONFIG_PKG_USING_TINYFRAME is not set
+# CONFIG_PKG_USING_KENDRYTE_DEMO is not set
+# CONFIG_PKG_USING_DIGITALCTRL is not set
+# CONFIG_PKG_USING_UPACKER is not set
+# CONFIG_PKG_USING_UPARAM is not set
+
+#
+# samples: kernel and components samples
+#
+# CONFIG_PKG_USING_KERNEL_SAMPLES is not set
+# CONFIG_PKG_USING_FILESYSTEM_SAMPLES is not set
+# CONFIG_PKG_USING_NETWORK_SAMPLES is not set
+# CONFIG_PKG_USING_PERIPHERAL_SAMPLES is not set
+# CONFIG_PKG_USING_HELLO is not set
+# CONFIG_PKG_USING_VI is not set
+# CONFIG_PKG_USING_NNOM is not set
+# CONFIG_PKG_USING_LIBANN is not set
+# CONFIG_PKG_USING_ELAPACK is not set
+# CONFIG_PKG_USING_ARMv7M_DWT is not set
+# CONFIG_PKG_USING_VT100 is not set
+CONFIG_SOC_FAMILY_STM32=y
+CONFIG_SOC_SERIES_STM32H7=y
+
+#
+# Hardware Drivers Config
+#
+CONFIG_SOC_STM32H747XI=y
+
+#
+# Onboard Peripheral Drivers
+#
+
+#
+# On-chip Peripheral Drivers
+#
+CONFIG_BSP_USING_GPIO=y
+CONFIG_BSP_USING_UART=y
+CONFIG_BSP_USING_UART1=y
+# CONFIG_BSP_USING_CRC is not set
+# CONFIG_BSP_USING_RNG is not set
+# CONFIG_BSP_USING_UDID is not set
+
+#
+# Board extended module Drivers
+#

bsp/stm32/stm32h747-st-discovery/.gitignore

+*.pyc
+*.map
+*.dblite
+*.elf
+*.bin
+*.hex
+*.axf
+*.exe
+*.pdb
+*.idb
+*.ilk
+*.old
+build
+Debug
+documentation/html
+packages/
+*~
+*.o
+*.obj
+*.out
+*.bak
+*.dep
+*.lib
+*.i
+*.d
+.DS_Stor*
+.config 3
+.config 4
+.config 5
+Midea-X1
+*.uimg
+GPATH
+GRTAGS
+GTAGS
+.vscode
+JLinkLog.txt
+JLinkSettings.ini
+DebugConfig/
+RTE/
+settings/
+*.uvguix*
+cconfig.h

bsp/stm32/stm32h747-st-discovery/Kconfig

+mainmenu "RT-Thread Configuration"
+
+config BSP_DIR
+    string
+    option env="BSP_ROOT"
+    default "."
+
+config RTT_DIR
+    string
+    option env="RTT_ROOT"
+    default "../../.."
+
+config PKGS_DIR
+    string
+    option env="PKGS_ROOT"
+    default "packages"
+ 
+source "$RTT_DIR/Kconfig"
+source "$PKGS_DIR/Kconfig"
+source "../libraries/Kconfig"
+source "board/Kconfig"

bsp/stm32/stm32h747-st-discovery/README.md

+# STM32H747-ST-DISCOVERY 开发板 BSP 说明
+
+## 简介
+
+本文档为 [SummerGift](https://github.com/SummerLife) 为 STM32H747-ST-DISCOVERY 开发板提供的 BSP (板级支持包) 说明。
+
+主要内容如下：
+
+- 开发板资源介绍
+- BSP 快速上手
+- 进阶使用方法
+
+通过阅读快速上手章节开发者可以快速地上手该 BSP，将 RT-Thread 运行在开发板上。在进阶使用指南章节，将会介绍更多高级功能，帮助开发者利用 RT-Thread 驱动更多板载资源。
+
+## 开发板介绍
+
+STM32H747I-DISCO 是 ST 推出的一款基于 ARM Cortex-M7 内核的开发板，最高主频为 480Mhz，该开发板具有丰富的板载资源，可以充分发挥 STM32H747 的芯片性能。
+
+开发板外观如下图所示：
+
+![board](figures/board.png)
+
+该开发板常用 **板载资源** 如下：
+
+- MCU：STM32H747，主频 480MHz，2MB FLASH ，1MB RAM
+- 常用接口：USB 转串口、以太网接口、arduino 接口等
+- 调试接口，标准 JTAG/SWD
+
+开发板更多详细信息请参考 ST 官方介绍页面 [STM32H747I-DISCO](https://www.st.com/content/st_com/en/products/evaluation-tools/product-evaluation-tools/mcu-mpu-eval-tools/stm32-mcu-mpu-eval-tools/stm32-discovery-kits/stm32h747i-disco.html)。
+
+## 外设支持
+
+本 BSP 目前对外设的支持情况如下：
+
+| **板载外设**      | **支持情况** | **备注**                              |
+| :----------------- | :----------: | :------------------------------------- |
+| USB 转串口        |     支持     ||
+| **片上外设**      | **支持情况** | **备注**                              |
+| GPIO              |     支持     | |
+| UART              |     支持     |   UART1                                  |
+
+
+## 使用说明
+
+使用说明分为如下两个章节：
+
+- 快速上手
+
+    本章节是为刚接触 RT-Thread 的新手准备的使用说明，遵循简单的步骤即可将 RT-Thread 操作系统运行在该开发板上，看到实验效果 。
+
+- 进阶使用
+
+    本章节是为需要在 RT-Thread 操作系统上使用更多开发板资源的开发者准备的。通过使用 ENV 工具对 BSP 进行配置，可以开启更多板载资源，实现更多高级功能。
+
+
+### 快速上手
+
+本 BSP 为开发者提供 MDK5 和 IAR 工程，并且支持 GCC 开发环境。下面以 MDK5 开发环境为例，介绍如何将系统运行起来。
+
+#### 硬件连接
+
+使用数据线连接开发板到 PC，打开电源开关。
+
+#### 编译下载
+
+双击 project.uvprojx 文件，打开 MDK5 （MDK 需要 5.29 版本以上才支持 ST-LINK V3）工程，编译并下载程序到开发板。
+
+> 工程默认配置使用 ST_LINK 仿真器下载程序，在通过 ST_LINK 连接开发板的基础上，点击下载按钮即可下载程序到开发板
+
+#### 运行结果
+
+下载程序成功之后，系统会自动运行，LED 闪烁。
+
+连接开发板对应串口到 PC , 在终端工具里打开相应的串口（115200-8-1-N），复位设备后，可以看到 RT-Thread 的输出信息:
+
+```bash
+ \ | /
+- RT -     Thread Operating System
+ / | \     4.0.3 build Feb 24 2020
+ 2006 - 2020 Copyright by rt-thread team
+msh >
+```
+### 进阶使用
+
+此 BSP 默认只开启了 GPIO 和 串口 1 的功能，如果需使用更多高级功能，需要利用 ENV 工具对 BSP 进行配置，步骤如下：
+
+1. 在 bsp 下打开 env 工具。
+
+2. 输入`menuconfig`命令配置工程，配置好之后保存退出。
+
+3. 输入`pkgs --update`命令更新软件包。
+
+4. 输入`scons --target=mdk4/mdk5/iar` 命令重新生成工程。
+
+本章节更多详细的介绍请参考 [STM32 系列 BSP 外设驱动使用教程](../docs/STM32系列BSP外设驱动使用教程.md)。
+
+## 注意事项
+
+- 调试串口为串口 1 映射说明
+
+    PA9     ------> USART1_TX
+
+    PA10   ------> USART1_RX 
+
+## 联系人信息
+
+维护人:
+
+-  [SummerGift](https://github.com/SummerLife)
\ No newline at end of file

bsp/stm32/stm32h747-st-discovery/SConscript

+# for module compiling
+import os
+from building import *
+
+cwd = GetCurrentDir()
+objs = []
+list = os.listdir(cwd)
+
+for d in list:
+    path = os.path.join(cwd, d)
+    if os.path.isfile(os.path.join(path, 'SConscript')):
+        objs = objs + SConscript(os.path.join(d, 'SConscript'))
+
+Return('objs')

bsp/stm32/stm32h747-st-discovery/SConstruct

+import os
+import sys
+import rtconfig
+
+if os.getenv('RTT_ROOT'):
+    RTT_ROOT = os.getenv('RTT_ROOT')
+else:
+    RTT_ROOT = os.path.normpath(os.getcwd() + '/../../..')
+
+sys.path = sys.path + [os.path.join(RTT_ROOT, 'tools')]
+try:
+    from building import *
+except:
+    print('Cannot found RT-Thread root directory, please check RTT_ROOT')
+    print(RTT_ROOT)
+    exit(-1)
+
+TARGET = 'rt-thread.' + rtconfig.TARGET_EXT
+
+DefaultEnvironment(tools=[])
+env = Environment(tools = ['mingw'],
+    AS = rtconfig.AS, ASFLAGS = rtconfig.AFLAGS,
+    CC = rtconfig.CC, CCFLAGS = rtconfig.CFLAGS,
+    AR = rtconfig.AR, ARFLAGS = '-rc',
+    CXX = rtconfig.CXX, CXXFLAGS = rtconfig.CXXFLAGS,
+    LINK = rtconfig.LINK, LINKFLAGS = rtconfig.LFLAGS)
+env.PrependENVPath('PATH', rtconfig.EXEC_PATH)
+
+if rtconfig.PLATFORM == 'iar':
+    env.Replace(CCCOM = ['$CC $CCFLAGS $CPPFLAGS $_CPPDEFFLAGS $_CPPINCFLAGS -o $TARGET $SOURCES'])
+    env.Replace(ARFLAGS = [''])
+    env.Replace(LINKCOM = env["LINKCOM"] + ' --map rt-thread.map')
+
+Export('RTT_ROOT')
+Export('rtconfig')
+
+SDK_ROOT = os.path.abspath('./')
+
+if os.path.exists(SDK_ROOT + '/libraries'):
+    libraries_path_prefix = SDK_ROOT + '/libraries'
+else:
+    libraries_path_prefix = os.path.dirname(SDK_ROOT) + '/libraries'
+
+SDK_LIB = libraries_path_prefix
+Export('SDK_LIB')
+
+# prepare building environment
+objs = PrepareBuilding(env, RTT_ROOT, has_libcpu=False)
+
+stm32_library = 'STM32H7xx_HAL'
+rtconfig.BSP_LIBRARY_TYPE = stm32_library
+
+# include drivers
+objs.extend(SConscript(os.path.join(libraries_path_prefix, stm32_library, 'SConscript')))
+
+# include libraries
+objs.extend(SConscript(os.path.join(libraries_path_prefix, 'HAL_Drivers', 'SConscript')))
+
+# make a building
+DoBuilding(TARGET, objs)

bsp/stm32/stm32h747-st-discovery/applications/SConscript

+import rtconfig
+from building import *
+
+cwd     = GetCurrentDir()
+CPPPATH = [cwd, str(Dir('#'))]
+src     = Split("""
+main.c
+""")
+
+group = DefineGroup('Applications', src, depend = [''])
+
+Return('group')

bsp/stm32/stm32h747-st-discovery/applications/main.c

+/*
+ * Copyright (c) 2006-2020, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2020-02-24     SummerGift   first version
+ */
+
+#include <rtthread.h>
+#include <rtdevice.h>
+#include <board.h>
+
+/* defined the LED0 pin: PI12 */
+#define LED0_PIN    GET_PIN(I, 12)
+
+int main(void)
+{
+    int count = 1;
+    /* set LED0 pin mode to output */
+    rt_pin_mode(LED0_PIN, PIN_MODE_OUTPUT);
+
+    while (count++)
+    {
+        rt_pin_write(LED0_PIN, PIN_HIGH);
+        rt_thread_mdelay(500);
+        rt_pin_write(LED0_PIN, PIN_LOW);
+        rt_thread_mdelay(500);
+    }
+    return RT_EOK;
+}

bsp/stm32/stm32h747-st-discovery/board/CubeMX_Config/CM4/Inc/main.h

+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file           : main.h
+  * @brief          : Header for main.c file.
+  *                   This file contains the common defines of the application.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __MAIN_H
+#define __MAIN_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32h7xx_hal.h"
+
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Exported types ------------------------------------------------------------*/
+/* USER CODE BEGIN ET */
+
+/* USER CODE END ET */
+
+/* Exported constants --------------------------------------------------------*/
+/* USER CODE BEGIN EC */
+
+/* USER CODE END EC */
+
+/* Exported macro ------------------------------------------------------------*/
+/* USER CODE BEGIN EM */
+
+/* USER CODE END EM */
+
+/* Exported functions prototypes ---------------------------------------------*/
+void Error_Handler(void);
+
+/* USER CODE BEGIN EFP */
+
+/* USER CODE END EFP */
+
+/* Private defines -----------------------------------------------------------*/
+/* USER CODE BEGIN Private defines */
+
+/* USER CODE END Private defines */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __MAIN_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp/stm32/stm32h747-st-discovery/board/CubeMX_Config/CM4/Inc/stm32h7xx_hal_conf.h

+/**
+  ******************************************************************************
+  * @file    stm32h7xx_hal_conf.h
+  * @author  MCD Application Team
+  * @brief   HAL configuration file.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32H7xx_HAL_CONF_H
+#define __STM32H7xx_HAL_CONF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+  * @brief This is the list of modules to be used in the HAL driver 
+  */
+#define HAL_MODULE_ENABLED  
+
+  /* #define HAL_ADC_MODULE_ENABLED   */
+/* #define HAL_FDCAN_MODULE_ENABLED   */
+/* #define HAL_CEC_MODULE_ENABLED   */
+/* #define HAL_COMP_MODULE_ENABLED   */
+/* #define HAL_CRC_MODULE_ENABLED   */
+/* #define HAL_CRYP_MODULE_ENABLED   */
+/* #define HAL_DAC_MODULE_ENABLED   */
+/* #define HAL_DCMI_MODULE_ENABLED   */
+/* #define HAL_DMA2D_MODULE_ENABLED   */
+/* #define HAL_ETH_MODULE_ENABLED   */
+/* #define HAL_NAND_MODULE_ENABLED   */
+/* #define HAL_NOR_MODULE_ENABLED   */
+/* #define HAL_OTFDEC_MODULE_ENABLED   */
+/* #define HAL_SRAM_MODULE_ENABLED   */
+/* #define HAL_SDRAM_MODULE_ENABLED   */
+/* #define HAL_HASH_MODULE_ENABLED   */
+/* #define HAL_HRTIM_MODULE_ENABLED   */
+/* #define HAL_HSEM_MODULE_ENABLED   */
+/* #define HAL_GFXMMU_MODULE_ENABLED   */
+/* #define HAL_JPEG_MODULE_ENABLED   */
+/* #define HAL_OPAMP_MODULE_ENABLED   */
+/* #define HAL_OSPI_MODULE_ENABLED   */
+/* #define HAL_OSPI_MODULE_ENABLED   */
+/* #define HAL_I2S_MODULE_ENABLED   */
+/* #define HAL_SMBUS_MODULE_ENABLED   */
+/* #define HAL_IWDG_MODULE_ENABLED   */
+/* #define HAL_LPTIM_MODULE_ENABLED   */
+/* #define HAL_LTDC_MODULE_ENABLED   */
+/* #define HAL_QSPI_MODULE_ENABLED   */
+/* #define HAL_RNG_MODULE_ENABLED   */
+/* #define HAL_RTC_MODULE_ENABLED   */
+/* #define HAL_SAI_MODULE_ENABLED   */
+/* #define HAL_SD_MODULE_ENABLED   */
+/* #define HAL_MMC_MODULE_ENABLED   */
+/* #define HAL_SPDIFRX_MODULE_ENABLED   */
+/* #define HAL_SPI_MODULE_ENABLED   */
+/* #define HAL_SWPMI_MODULE_ENABLED   */
+/* #define HAL_TIM_MODULE_ENABLED   */
+/* #define HAL_UART_MODULE_ENABLED   */
+/* #define HAL_USART_MODULE_ENABLED   */
+/* #define HAL_IRDA_MODULE_ENABLED   */
+/* #define HAL_SMARTCARD_MODULE_ENABLED   */
+/* #define HAL_WWDG_MODULE_ENABLED   */
+/* #define HAL_PCD_MODULE_ENABLED   */
+/* #define HAL_HCD_MODULE_ENABLED   */
+/* #define HAL_DFSDM_MODULE_ENABLED   */
+/* #define HAL_DSI_MODULE_ENABLED   */
+/* #define HAL_JPEG_MODULE_ENABLED   */
+/* #define HAL_MDIOS_MODULE_ENABLED   */
+/* #define HAL_PSSI_MODULE_ENABLED   */
+/* #define HAL_DTS_MODULE_ENABLED   */
+#define HAL_GPIO_MODULE_ENABLED
+#define HAL_DMA_MODULE_ENABLED
+#define HAL_MDMA_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED
+#define HAL_FLASH_MODULE_ENABLED
+#define HAL_EXTI_MODULE_ENABLED
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_I2C_MODULE_ENABLED
+#define HAL_CORTEX_MODULE_ENABLED
+#define HAL_HSEM_MODULE_ENABLED
+
+/* ########################## Oscillator Values adaptation ####################*/
+/**
+  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSE is used as system clock source, directly or through the PLL).  
+  */
+#if !defined  (HSE_VALUE) 
+#define HSE_VALUE    ((uint32_t)25000000) /*!< Value of the External oscillator in Hz : FPGA case fixed to 60MHZ */
+#endif /* HSE_VALUE */
+
+#if !defined  (HSE_STARTUP_TIMEOUT)
+  #define HSE_STARTUP_TIMEOUT    ((uint32_t)100U)   /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief Internal  oscillator (CSI) default value.
+  *        This value is the default CSI value after Reset.
+  */
+#if !defined  (CSI_VALUE)
+  #define CSI_VALUE    ((uint32_t)4000000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* CSI_VALUE */
+   
+/**
+  * @brief Internal High Speed oscillator (HSI) value.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSI is used as system clock source, directly or through the PLL). 
+  */
+#if !defined  (HSI_VALUE)
+  #define HSI_VALUE    ((uint32_t)64000000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+  * @brief External Low Speed oscillator (LSE) value.
+  *        This value is used by the UART, RTC HAL module to compute the system frequency
+  */
+#if !defined  (LSE_VALUE)
+  #define LSE_VALUE    ((uint32_t)32768U) /*!< Value of the External oscillator in Hz*/
+#endif /* LSE_VALUE */
+
+#if !defined  (LSE_STARTUP_TIMEOUT)
+  #define LSE_STARTUP_TIMEOUT    ((uint32_t)5000U)   /*!< Time out for LSE start up, in ms */
+#endif /* LSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief External clock source for I2S peripheral
+  *        This value is used by the I2S HAL module to compute the I2S clock source 
+  *        frequency, this source is inserted directly through I2S_CKIN pad. 
+  */
+#if !defined  (EXTERNAL_CLOCK_VALUE)
+  #define EXTERNAL_CLOCK_VALUE    12288000U /*!< Value of the External clock in Hz*/
+#endif /* EXTERNAL_CLOCK_VALUE */
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+   ===  you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+  * @brief This is the HAL system configuration section
+  */     
+#define  VDD_VALUE                    ((uint32_t)3300U) /*!< Value of VDD in mv */
+#define  TICK_INT_PRIORITY            ((uint32_t)0U) /*!< tick interrupt priority */
+#define  USE_RTOS                     0U
+#define  USE_SD_TRANSCEIVER           0U               /*!< use uSD Transceiver */
+
+#define  USE_HAL_ADC_REGISTER_CALLBACKS     0U /* ADC register callback disabled     */
+#define  USE_HAL_CEC_REGISTER_CALLBACKS     0U /* CEC register callback disabled     */
+#define  USE_HAL_COMP_REGISTER_CALLBACKS    0U /* COMP register callback disabled    */
+#define  USE_HAL_CRYP_REGISTER_CALLBACKS    0U /* CRYP register callback disabled    */
+#define  USE_HAL_DAC_REGISTER_CALLBACKS     0U /* DAC register callback disabled     */
+#define  USE_HAL_DCMI_REGISTER_CALLBACKS    0U /* DCMI register callback disabled    */
+#define  USE_HAL_DFSDM_REGISTER_CALLBACKS   0U /* DFSDM register callback disabled   */
+#define  USE_HAL_DMA2D_REGISTER_CALLBACKS   0U /* DMA2D register callback disabled   */
+#define  USE_HAL_DSI_REGISTER_CALLBACKS     0U /* DSI register callback disabled     */
+#define  USE_HAL_DTS_REGISTER_CALLBACKS     0U /* DTS register callback disabled     */
+#define  USE_HAL_ETH_REGISTER_CALLBACKS     0U /* ETH register callback disabled     */
+#define  USE_HAL_FDCAN_REGISTER_CALLBACKS   0U /* FDCAN register callback disabled   */
+#define  USE_HAL_NAND_REGISTER_CALLBACKS    0U /* NAND register callback disabled    */
+#define  USE_HAL_NOR_REGISTER_CALLBACKS     0U /* NOR register callback disabled     */
+#define  USE_HAL_SDRAM_REGISTER_CALLBACKS   0U /* SDRAM register callback disabled   */
+#define  USE_HAL_SRAM_REGISTER_CALLBACKS    0U /* SRAM register callback disabled    */
+#define  USE_HAL_HASH_REGISTER_CALLBACKS    0U /* HASH register callback disabled    */
+#define  USE_HAL_HCD_REGISTER_CALLBACKS     0U /* HCD register callback disabled     */
+#define  USE_HAL_GFXMMU_REGISTER_CALLBACKS  0U /* GFXMMU register callback disabled  */
+#define  USE_HAL_HRTIM_REGISTER_CALLBACKS   0U /* HRTIM register callback disabled   */
+#define  USE_HAL_I2C_REGISTER_CALLBACKS     0U /* I2C register callback disabled     */
+#define  USE_HAL_I2S_REGISTER_CALLBACKS     0U /* I2S register callback disabled     */
+#define  USE_HAL_IRDA_REGISTER_CALLBACKS    0U /* IRDA register callback disabled    */
+#define  USE_HAL_JPEG_REGISTER_CALLBACKS    0U /* JPEG register callback disabled    */
+#define  USE_HAL_LPTIM_REGISTER_CALLBACKS   0U /* LPTIM register callback disabled   */
+#define  USE_HAL_LTDC_REGISTER_CALLBACKS    0U /* LTDC register callback disabled    */
+#define  USE_HAL_MDIOS_REGISTER_CALLBACKS   0U /* MDIO register callback disabled    */
+#define  USE_HAL_MMC_REGISTER_CALLBACKS     0U /* MMC register callback disabled     */
+#define  USE_HAL_OPAMP_REGISTER_CALLBACKS   0U /* MDIO register callback disabled    */
+#define  USE_HAL_OSPI_REGISTER_CALLBACKS    0U /* OSPI register callback disabled    */
+#define  USE_HAL_OTFDEC_REGISTER_CALLBACKS  0U /* OTFDEC register callback disabled  */
+#define  USE_HAL_PCD_REGISTER_CALLBACKS     0U /* PCD register callback disabled     */
+#define  USE_HAL_QSPI_REGISTER_CALLBACKS    0U /* QSPI register callback disabled    */
+#define  USE_HAL_RNG_REGISTER_CALLBACKS     0U /* RNG register callback disabled     */
+#define  USE_HAL_RTC_REGISTER_CALLBACKS     0U /* RTC register callback disabled     */
+#define  USE_HAL_SAI_REGISTER_CALLBACKS     0U /* SAI register callback disabled     */
+#define  USE_HAL_SD_REGISTER_CALLBACKS      0U /* SD register callback disabled      */
+#define  USE_HAL_SMARTCARD_REGISTER_CALLBACKS  0U /* SMARTCARD register callback disabled */
+#define  USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */
+#define  USE_HAL_SMBUS_REGISTER_CALLBACKS   0U /* SMBUS register callback disabled   */
+#define  USE_HAL_SPI_REGISTER_CALLBACKS     0U /* SPI register callback disabled     */
+#define  USE_HAL_SWPMI_REGISTER_CALLBACKS   0U /* SWPMI register callback disabled   */
+#define  USE_HAL_TIM_REGISTER_CALLBACKS     0U /* TIM register callback disabled     */
+#define  USE_HAL_UART_REGISTER_CALLBACKS    0U /* UART register callback disabled    */
+#define  USE_HAL_USART_REGISTER_CALLBACKS   0U /* USART register callback disabled   */
+#define  USE_HAL_WWDG_REGISTER_CALLBACKS    0U /* WWDG register callback disabled    */
+
+/* ########################### Ethernet Configuration ######################### */
+#define ETH_TX_DESC_CNT         4  /* number of Ethernet Tx DMA descriptors */
+#define ETH_RX_DESC_CNT         4  /* number of Ethernet Rx DMA descriptors */
+
+#define ETH_MAC_ADDR0    ((uint8_t)0x02)
+#define ETH_MAC_ADDR1    ((uint8_t)0x00)
+#define ETH_MAC_ADDR2    ((uint8_t)0x00)
+#define ETH_MAC_ADDR3    ((uint8_t)0x00)
+#define ETH_MAC_ADDR4    ((uint8_t)0x00)
+#define ETH_MAC_ADDR5    ((uint8_t)0x00)
+
+/* ########################## Assert Selection ############################## */
+/**
+  * @brief Uncomment the line below to expanse the "assert_param" macro in the 
+  *        HAL drivers code
+  */
+/* #define USE_FULL_ASSERT    1U */ 
+
+/* Includes ------------------------------------------------------------------*/
+/**
+  * @brief Include module's header file 
+  */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+  #include "stm32h7xx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+  #include "stm32h7xx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+  #include "stm32h7xx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+
+#ifdef HAL_MDMA_MODULE_ENABLED
+ #include "stm32h7xx_hal_mdma.h"
+#endif /* HAL_MDMA_MODULE_ENABLED */
+
+#ifdef HAL_HASH_MODULE_ENABLED
+  #include "stm32h7xx_hal_hash.h"
+#endif /* HAL_HASH_MODULE_ENABLED */
+
+#ifdef HAL_DCMI_MODULE_ENABLED
+  #include "stm32h7xx_hal_dcmi.h"
+#endif /* HAL_DCMI_MODULE_ENABLED */
+
+#ifdef HAL_DMA2D_MODULE_ENABLED
+  #include "stm32h7xx_hal_dma2d.h"
+#endif /* HAL_DMA2D_MODULE_ENABLED */
+
+#ifdef HAL_DSI_MODULE_ENABLED
+  #include "stm32h7xx_hal_dsi.h"
+#endif /* HAL_DSI_MODULE_ENABLED */
+
+#ifdef HAL_DFSDM_MODULE_ENABLED
+  #include "stm32h7xx_hal_dfsdm.h"
+#endif /* HAL_DFSDM_MODULE_ENABLED */
+
+#ifdef HAL_ETH_MODULE_ENABLED
+  #include "stm32h7xx_hal_eth.h"
+#endif /* HAL_ETH_MODULE_ENABLED */
+
+#ifdef HAL_EXTI_MODULE_ENABLED
+  #include "stm32h7xx_hal_exti.h"
+#endif /* HAL_EXTI_MODULE_ENABLED */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+  #include "stm32h7xx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+  #include "stm32h7xx_hal_adc.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_FDCAN_MODULE_ENABLED
+  #include "stm32h7xx_hal_fdcan.h"
+#endif /* HAL_FDCAN_MODULE_ENABLED */
+
+#ifdef HAL_CEC_MODULE_ENABLED
+  #include "stm32h7xx_hal_cec.h"
+#endif /* HAL_CEC_MODULE_ENABLED */
+
+#ifdef HAL_COMP_MODULE_ENABLED
+  #include "stm32h7xx_hal_comp.h"
+#endif /* HAL_COMP_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+  #include "stm32h7xx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_CRYP_MODULE_ENABLED
+  #include "stm32h7xx_hal_cryp.h"
+#endif /* HAL_CRYP_MODULE_ENABLED */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+  #include "stm32h7xx_hal_dac.h"
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+  #include "stm32h7xx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+#ifdef HAL_GFXMMU_MODULE_ENABLED
+  #include "stm32h7xx_hal_gfxmmu.h"
+#endif /* HAL_GFXMMU_MODULE_ENABLED */
+
+#ifdef HAL_HRTIM_MODULE_ENABLED
+  #include "stm32h7xx_hal_hrtim.h"
+#endif /* HAL_HRTIM_MODULE_ENABLED */
+
+#ifdef HAL_HSEM_MODULE_ENABLED
+  #include "stm32h7xx_hal_hsem.h"
+#endif /* HAL_HSEM_MODULE_ENABLED */
+
+#ifdef HAL_SRAM_MODULE_ENABLED
+  #include "stm32h7xx_hal_sram.h"
+#endif /* HAL_SRAM_MODULE_ENABLED */
+
+#ifdef HAL_NOR_MODULE_ENABLED
+  #include "stm32h7xx_hal_nor.h"
+#endif /* HAL_NOR_MODULE_ENABLED */
+
+#ifdef HAL_NAND_MODULE_ENABLED
+  #include "stm32h7xx_hal_nand.h"
+#endif /* HAL_NAND_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+ #include "stm32h7xx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_I2S_MODULE_ENABLED
+ #include "stm32h7xx_hal_i2s.h"
+#endif /* HAL_I2S_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+ #include "stm32h7xx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_JPEG_MODULE_ENABLED
+ #include "stm32h7xx_hal_jpeg.h"
+#endif /* HAL_JPEG_MODULE_ENABLED */
+
+#ifdef HAL_MDIOS_MODULE_ENABLED
+ #include "stm32h7xx_hal_mdios.h"
+#endif /* HAL_MDIOS_MODULE_ENABLED */
+
+#ifdef HAL_MMC_MODULE_ENABLED
+ #include "stm32h7xx_hal_mmc.h"
+#endif /* HAL_MMC_MODULE_ENABLED */
+
+#ifdef HAL_LPTIM_MODULE_ENABLED
+#include "stm32h7xx_hal_lptim.h"
+#endif /* HAL_LPTIM_MODULE_ENABLED */
+
+#ifdef HAL_LTDC_MODULE_ENABLED
+#include "stm32h7xx_hal_ltdc.h"
+#endif /* HAL_LTDC_MODULE_ENABLED */
+
+#ifdef HAL_OPAMP_MODULE_ENABLED
+#include "stm32h7xx_hal_opamp.h"
+#endif /* HAL_OPAMP_MODULE_ENABLED */
+
+#ifdef HAL_OSPI_MODULE_ENABLED
+  #include "stm32h7xx_hal_ospi.h"
+#endif /* HAL_OSPI_MODULE_ENABLED */
+   
+#ifdef HAL_OTFDEC_MODULE_ENABLED
+#include "stm32h7xx_hal_otfdec.h"
+#endif /* HAL_OTFDEC_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+ #include "stm32h7xx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_QSPI_MODULE_ENABLED
+ #include "stm32h7xx_hal_qspi.h"
+#endif /* HAL_QSPI_MODULE_ENABLED */
+
+#ifdef HAL_RAMECC_MODULE_ENABLED
+ #include "stm32h7xx_hal_ramecc.h"
+#endif /* HAL_HCD_MODULE_ENABLED */
+
+#ifdef HAL_RNG_MODULE_ENABLED
+ #include "stm32h7xx_hal_rng.h"
+#endif /* HAL_RNG_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+ #include "stm32h7xx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_SAI_MODULE_ENABLED
+ #include "stm32h7xx_hal_sai.h"
+#endif /* HAL_SAI_MODULE_ENABLED */
+
+#ifdef HAL_SD_MODULE_ENABLED
+ #include "stm32h7xx_hal_sd.h"
+#endif /* HAL_SD_MODULE_ENABLED */
+
+#ifdef HAL_SDRAM_MODULE_ENABLED
+ #include "stm32h7xx_hal_sdram.h"
+#endif /* HAL_SDRAM_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+ #include "stm32h7xx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_SPDIFRX_MODULE_ENABLED
+ #include "stm32h7xx_hal_spdifrx.h"
+#endif /* HAL_SPDIFRX_MODULE_ENABLED */
+
+#ifdef HAL_SWPMI_MODULE_ENABLED
+ #include "stm32h7xx_hal_swpmi.h"
+#endif /* HAL_SWPMI_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+ #include "stm32h7xx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+ #include "stm32h7xx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+ #include "stm32h7xx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+ #include "stm32h7xx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+ #include "stm32h7xx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_SMBUS_MODULE_ENABLED
+ #include "stm32h7xx_hal_smbus.h"
+#endif /* HAL_SMBUS_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+ #include "stm32h7xx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+ #include "stm32h7xx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+#ifdef HAL_HCD_MODULE_ENABLED
+ #include "stm32h7xx_hal_hcd.h"
+#endif /* HAL_HCD_MODULE_ENABLED */
+
+#ifdef HAL_PSSI_MODULE_ENABLED
+  #include "stm32h7xx_hal_pssi.h"
+#endif /* HAL_PSSI_MODULE_ENABLED */
+
+#ifdef HAL_DTS_MODULE_ENABLED
+  #include "stm32h7xx_hal_dts.h"
+#endif /* HAL_DTS_MODULE_ENABLED */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef  USE_FULL_ASSERT
+/**
+  * @brief  The assert_param macro is used for function's parameters check.
+  * @param  expr: If expr is false, it calls assert_failed function
+  *         which reports the name of the source file and the source
+  *         line number of the call that failed. 
+  *         If expr is true, it returns no value.
+  * @retval None
+  */
+  #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+  void assert_failed(uint8_t* file, uint32_t line);
+#else
+  #define assert_param(expr) ((void)0U)
+#endif /* USE_FULL_ASSERT */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32H7xx_HAL_CONF_H */
+ 
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp/stm32/stm32h747-st-discovery/board/CubeMX_Config/CM4/Inc/stm32h7xx_it.h

+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    stm32h7xx_it.h
+  * @brief   This file contains the headers of the interrupt handlers.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+ ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32H7xx_IT_H
+#define __STM32H7xx_IT_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif 
+
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Exported types ------------------------------------------------------------*/
+/* USER CODE BEGIN ET */
+
+/* USER CODE END ET */
+
+/* Exported constants --------------------------------------------------------*/
+/* USER CODE BEGIN EC */
+
+/* USER CODE END EC */
+
+/* Exported macro ------------------------------------------------------------*/
+/* USER CODE BEGIN EM */
+
+/* USER CODE END EM */
+
+/* Exported functions prototypes ---------------------------------------------*/
+void NMI_Handler(void);
+void HardFault_Handler(void);
+void MemManage_Handler(void);
+void BusFault_Handler(void);
+void UsageFault_Handler(void);
+void SVC_Handler(void);
+void DebugMon_Handler(void);
+void PendSV_Handler(void);
+void SysTick_Handler(void);
+/* USER CODE BEGIN EFP */
+
+/* USER CODE END EFP */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32H7xx_IT_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp/stm32/stm32h747-st-discovery/board/CubeMX_Config/CM4/Src/main.c

+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file           : main.c
+  * @brief          : Main program body
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Private typedef -----------------------------------------------------------*/
+/* USER CODE BEGIN PTD */
+
+/* USER CODE END PTD */
+
+/* Private define ------------------------------------------------------------*/
+/* USER CODE BEGIN PD */
+ 
+#define HSEM_ID_0 (0U) /* HW semaphore 0*/
+/* USER CODE END PD */
+
+/* Private macro -------------------------------------------------------------*/
+/* USER CODE BEGIN PM */
+
+/* USER CODE END PM */
+
+/* Private variables ---------------------------------------------------------*/
+
+/* USER CODE BEGIN PV */
+
+/* USER CODE END PV */
+
+/* Private function prototypes -----------------------------------------------*/
+/* USER CODE BEGIN PFP */
+
+/* USER CODE END PFP */
+
+/* Private user code ---------------------------------------------------------*/
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+/**
+  * @brief  The application entry point.
+  * @retval int
+  */
+int main(void)
+{
+  /* USER CODE BEGIN 1 */
+
+  /* USER CODE END 1 */
+  
+
+/* USER CODE BEGIN Boot_Mode_Sequence_1 */
+  /*HW semaphore Clock enable*/
+  __HAL_RCC_HSEM_CLK_ENABLE();
+  /* Activate HSEM notification for Cortex-M4*/
+  HAL_HSEM_ActivateNotification(__HAL_HSEM_SEMID_TO_MASK(HSEM_ID_0));
+  /*
+  Domain D2 goes to STOP mode (Cortex-M4 in deep-sleep) waiting for Cortex-M7 to
+  perform system initialization (system clock config, external memory configuration.. )
+  */
+  HAL_PWREx_ClearPendingEvent();
+  HAL_PWREx_EnterSTOPMode(PWR_MAINREGULATOR_ON, PWR_STOPENTRY_WFE, PWR_D2_DOMAIN);
+  /* Clear HSEM flag */
+  __HAL_HSEM_CLEAR_FLAG(__HAL_HSEM_SEMID_TO_MASK(HSEM_ID_0));
+
+/* USER CODE END Boot_Mode_Sequence_1 */
+  /* MCU Configuration--------------------------------------------------------*/
+
+  /* Reset of all peripherals, Initializes the Flash interface and the Systick. */
+  HAL_Init();
+
+  /* USER CODE BEGIN Init */
+
+  /* USER CODE END Init */
+
+  /* USER CODE BEGIN SysInit */
+
+  /* USER CODE END SysInit */
+
+  /* Initialize all configured peripherals */
+  /* USER CODE BEGIN 2 */
+
+  /* USER CODE END 2 */
+ 
+ 
+
+  /* Infinite loop */
+  /* USER CODE BEGIN WHILE */
+  while (1)
+  {
+    /* USER CODE END WHILE */
+
+    /* USER CODE BEGIN 3 */
+  }
+  /* USER CODE END 3 */
+}
+
+/* USER CODE BEGIN 4 */
+
+/* USER CODE END 4 */
+
+/**
+  * @brief  This function is executed in case of error occurrence.
+  * @retval None
+  */
+void Error_Handler(void)
+{
+  /* USER CODE BEGIN Error_Handler_Debug */
+  /* User can add his own implementation to report the HAL error return state */
+
+  /* USER CODE END Error_Handler_Debug */
+}
+
+#ifdef  USE_FULL_ASSERT
+/**
+  * @brief  Reports the name of the source file and the source line number
+  *         where the assert_param error has occurred.
+  * @param  file: pointer to the source file name
+  * @param  line: assert_param error line source number
+  * @retval None
+  */
+void assert_failed(uint8_t *file, uint32_t line)
+{ 
+  /* USER CODE BEGIN 6 */
+  /* User can add his own implementation to report the file name and line number,
+     tex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
+  /* USER CODE END 6 */
+}
+#endif /* USE_FULL_ASSERT */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp/stm32/stm32h747-st-discovery/board/CubeMX_Config/CM4/Src/stm32h7xx_hal_msp.c

+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * File Name          : stm32h7xx_hal_msp.c
+  * Description        : This file provides code for the MSP Initialization 
+  *                      and de-Initialization codes.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Private typedef -----------------------------------------------------------*/
+/* USER CODE BEGIN TD */
+
+/* USER CODE END TD */
+
+/* Private define ------------------------------------------------------------*/
+/* USER CODE BEGIN Define */
+ 
+/* USER CODE END Define */
+
+/* Private macro -------------------------------------------------------------*/
+/* USER CODE BEGIN Macro */
+
+/* USER CODE END Macro */
+
+/* Private variables ---------------------------------------------------------*/
+/* USER CODE BEGIN PV */
+
+/* USER CODE END PV */
+
+/* Private function prototypes -----------------------------------------------*/
+/* USER CODE BEGIN PFP */
+
+/* USER CODE END PFP */
+
+/* External functions --------------------------------------------------------*/
+/* USER CODE BEGIN ExternalFunctions */
+
+/* USER CODE END ExternalFunctions */
+
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+/**
+  * Initializes the Global MSP.
+  */
+void HAL_MspInit(void)
+{
+  /* USER CODE BEGIN MspInit 0 */
+
+  /* USER CODE END MspInit 0 */
+
+  __HAL_RCC_SYSCFG_CLK_ENABLE();
+
+  /* System interrupt init*/
+
+  /* USER CODE BEGIN MspInit 1 */
+
+  /* USER CODE END MspInit 1 */
+}
+
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp/stm32/stm32h747-st-discovery/board/CubeMX_Config/CM4/Src/stm32h7xx_it.c

+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    stm32h7xx_it.c
+  * @brief   Interrupt Service Routines.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+#include "stm32h7xx_it.h"
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+/* USER CODE END Includes */
+
+/* Private typedef -----------------------------------------------------------*/
+/* USER CODE BEGIN TD */
+
+/* USER CODE END TD */
+
+/* Private define ------------------------------------------------------------*/
+/* USER CODE BEGIN PD */
+ 
+/* USER CODE END PD */
+
+/* Private macro -------------------------------------------------------------*/
+/* USER CODE BEGIN PM */
+
+/* USER CODE END PM */
+
+/* Private variables ---------------------------------------------------------*/
+/* USER CODE BEGIN PV */
+
+/* USER CODE END PV */
+
+/* Private function prototypes -----------------------------------------------*/
+/* USER CODE BEGIN PFP */
+
+/* USER CODE END PFP */
+
+/* Private user code ---------------------------------------------------------*/
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+/* External variables --------------------------------------------------------*/
+
+/* USER CODE BEGIN EV */
+
+/* USER CODE END EV */
+
+/******************************************************************************/
+/*           Cortex Processor Interruption and Exception Handlers          */ 
+/******************************************************************************/
+/**
+  * @brief This function handles Non maskable interrupt.
+  */
+void NMI_Handler(void)
+{
+  /* USER CODE BEGIN NonMaskableInt_IRQn 0 */
+
+  /* USER CODE END NonMaskableInt_IRQn 0 */
+  /* USER CODE BEGIN NonMaskableInt_IRQn 1 */
+
+  /* USER CODE END NonMaskableInt_IRQn 1 */
+}
+
+/**
+  * @brief This function handles Hard fault interrupt.
+  */
+void HardFault_Handler(void)
+{
+  /* USER CODE BEGIN HardFault_IRQn 0 */
+
+  /* USER CODE END HardFault_IRQn 0 */
+  while (1)
+  {
+    /* USER CODE BEGIN W1_HardFault_IRQn 0 */
+    /* USER CODE END W1_HardFault_IRQn 0 */
+  }
+}
+
+/**
+  * @brief This function handles Memory management fault.
+  */
+void MemManage_Handler(void)
+{
+  /* USER CODE BEGIN MemoryManagement_IRQn 0 */
+
+  /* USER CODE END MemoryManagement_IRQn 0 */
+  while (1)
+  {
+    /* USER CODE BEGIN W1_MemoryManagement_IRQn 0 */
+    /* USER CODE END W1_MemoryManagement_IRQn 0 */
+  }
+}
+
+/**
+  * @brief This function handles Pre-fetch fault, memory access fault.
+  */
+void BusFault_Handler(void)
+{
+  /* USER CODE BEGIN BusFault_IRQn 0 */
+
+  /* USER CODE END BusFault_IRQn 0 */
+  while (1)
+  {
+    /* USER CODE BEGIN W1_BusFault_IRQn 0 */
+    /* USER CODE END W1_BusFault_IRQn 0 */
+  }
+}
+
+/**
+  * @brief This function handles Undefined instruction or illegal state.
+  */
+void UsageFault_Handler(void)
+{
+  /* USER CODE BEGIN UsageFault_IRQn 0 */
+
+  /* USER CODE END UsageFault_IRQn 0 */
+  while (1)
+  {
+    /* USER CODE BEGIN W1_UsageFault_IRQn 0 */
+    /* USER CODE END W1_UsageFault_IRQn 0 */
+  }
+}
+
+/**
+  * @brief This function handles System service call via SWI instruction.
+  */
+void SVC_Handler(void)
+{
+  /* USER CODE BEGIN SVCall_IRQn 0 */
+
+  /* USER CODE END SVCall_IRQn 0 */
+  /* USER CODE BEGIN SVCall_IRQn 1 */
+
+  /* USER CODE END SVCall_IRQn 1 */
+}
+
+/**
+  * @brief This function handles Debug monitor.
+  */
+void DebugMon_Handler(void)
+{
+  /* USER CODE BEGIN DebugMonitor_IRQn 0 */
+
+  /* USER CODE END DebugMonitor_IRQn 0 */
+  /* USER CODE BEGIN DebugMonitor_IRQn 1 */
+
+  /* USER CODE END DebugMonitor_IRQn 1 */
+}
+
+/**
+  * @brief This function handles Pendable request for system service.
+  */
+void PendSV_Handler(void)
+{
+  /* USER CODE BEGIN PendSV_IRQn 0 */
+
+  /* USER CODE END PendSV_IRQn 0 */
+  /* USER CODE BEGIN PendSV_IRQn 1 */
+
+  /* USER CODE END PendSV_IRQn 1 */
+}
+
+/**
+  * @brief This function handles System tick timer.
+  */
+void SysTick_Handler(void)
+{
+  /* USER CODE BEGIN SysTick_IRQn 0 */
+
+  /* USER CODE END SysTick_IRQn 0 */
+  HAL_IncTick();
+  /* USER CODE BEGIN SysTick_IRQn 1 */
+
+  /* USER CODE END SysTick_IRQn 1 */
+}
+
+/******************************************************************************/
+/* STM32H7xx Peripheral Interrupt Handlers                                    */
+/* Add here the Interrupt Handlers for the used peripherals.                  */
+/* For the available peripheral interrupt handler names,                      */
+/* please refer to the startup file (startup_stm32h7xx.s).                    */
+/******************************************************************************/
+
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp/stm32/stm32h747-st-discovery/board/CubeMX_Config/CM7/Inc/main.h

+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file           : main.h
+  * @brief          : Header for main.c file.
+  *                   This file contains the common defines of the application.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __MAIN_H
+#define __MAIN_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32h7xx_hal.h"
+
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Exported types ------------------------------------------------------------*/
+/* USER CODE BEGIN ET */
+
+/* USER CODE END ET */
+
+/* Exported constants --------------------------------------------------------*/
+/* USER CODE BEGIN EC */
+
+/* USER CODE END EC */
+
+/* Exported macro ------------------------------------------------------------*/
+/* USER CODE BEGIN EM */
+
+/* USER CODE END EM */
+
+/* Exported functions prototypes ---------------------------------------------*/
+void Error_Handler(void);
+
+/* USER CODE BEGIN EFP */
+
+/* USER CODE END EFP */
+
+/* Private defines -----------------------------------------------------------*/
+/* USER CODE BEGIN Private defines */
+
+/* USER CODE END Private defines */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __MAIN_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp/stm32/stm32h747-st-discovery/board/CubeMX_Config/CM7/Inc/stm32h7xx_hal_conf.h

+/**
+  ******************************************************************************
+  * @file    stm32h7xx_hal_conf.h
+  * @author  MCD Application Team
+  * @brief   HAL configuration file.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32H7xx_HAL_CONF_H
+#define __STM32H7xx_HAL_CONF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+  * @brief This is the list of modules to be used in the HAL driver 
+  */
+#define HAL_MODULE_ENABLED  
+
+  /* #define HAL_ADC_MODULE_ENABLED   */
+/* #define HAL_FDCAN_MODULE_ENABLED   */
+/* #define HAL_CEC_MODULE_ENABLED   */
+/* #define HAL_COMP_MODULE_ENABLED   */
+/* #define HAL_CRC_MODULE_ENABLED   */
+/* #define HAL_CRYP_MODULE_ENABLED   */
+/* #define HAL_DAC_MODULE_ENABLED   */
+/* #define HAL_DCMI_MODULE_ENABLED   */
+/* #define HAL_DMA2D_MODULE_ENABLED   */
+/* #define HAL_ETH_MODULE_ENABLED   */
+/* #define HAL_NAND_MODULE_ENABLED   */
+/* #define HAL_NOR_MODULE_ENABLED   */
+/* #define HAL_OTFDEC_MODULE_ENABLED   */
+/* #define HAL_SRAM_MODULE_ENABLED   */
+/* #define HAL_SDRAM_MODULE_ENABLED   */
+/* #define HAL_HASH_MODULE_ENABLED   */
+/* #define HAL_HRTIM_MODULE_ENABLED   */
+/* #define HAL_HSEM_MODULE_ENABLED   */
+/* #define HAL_GFXMMU_MODULE_ENABLED   */
+/* #define HAL_JPEG_MODULE_ENABLED   */
+/* #define HAL_OPAMP_MODULE_ENABLED   */
+/* #define HAL_OSPI_MODULE_ENABLED   */
+/* #define HAL_OSPI_MODULE_ENABLED   */
+/* #define HAL_I2S_MODULE_ENABLED   */
+/* #define HAL_SMBUS_MODULE_ENABLED   */
+/* #define HAL_IWDG_MODULE_ENABLED   */
+/* #define HAL_LPTIM_MODULE_ENABLED   */
+/* #define HAL_LTDC_MODULE_ENABLED   */
+/* #define HAL_QSPI_MODULE_ENABLED   */
+/* #define HAL_RNG_MODULE_ENABLED   */
+/* #define HAL_RTC_MODULE_ENABLED   */
+/* #define HAL_SAI_MODULE_ENABLED   */
+/* #define HAL_SD_MODULE_ENABLED   */
+/* #define HAL_MMC_MODULE_ENABLED   */
+/* #define HAL_SPDIFRX_MODULE_ENABLED   */
+/* #define HAL_SPI_MODULE_ENABLED   */
+/* #define HAL_SWPMI_MODULE_ENABLED   */
+/* #define HAL_TIM_MODULE_ENABLED   */
+#define HAL_UART_MODULE_ENABLED
+/* #define HAL_USART_MODULE_ENABLED   */
+/* #define HAL_IRDA_MODULE_ENABLED   */
+/* #define HAL_SMARTCARD_MODULE_ENABLED   */
+/* #define HAL_WWDG_MODULE_ENABLED   */
+/* #define HAL_PCD_MODULE_ENABLED   */
+/* #define HAL_HCD_MODULE_ENABLED   */
+/* #define HAL_DFSDM_MODULE_ENABLED   */
+/* #define HAL_DSI_MODULE_ENABLED   */
+/* #define HAL_JPEG_MODULE_ENABLED   */
+/* #define HAL_MDIOS_MODULE_ENABLED   */
+/* #define HAL_PSSI_MODULE_ENABLED   */
+/* #define HAL_DTS_MODULE_ENABLED   */
+#define HAL_GPIO_MODULE_ENABLED
+#define HAL_DMA_MODULE_ENABLED
+#define HAL_MDMA_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED
+#define HAL_FLASH_MODULE_ENABLED
+#define HAL_EXTI_MODULE_ENABLED
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_I2C_MODULE_ENABLED
+#define HAL_CORTEX_MODULE_ENABLED
+#define HAL_HSEM_MODULE_ENABLED
+
+/* ########################## Oscillator Values adaptation ####################*/
+/**
+  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSE is used as system clock source, directly or through the PLL).  
+  */
+#if !defined  (HSE_VALUE) 
+#define HSE_VALUE    ((uint32_t)25000000) /*!< Value of the External oscillator in Hz : FPGA case fixed to 60MHZ */
+#endif /* HSE_VALUE */
+
+#if !defined  (HSE_STARTUP_TIMEOUT)
+  #define HSE_STARTUP_TIMEOUT    ((uint32_t)100U)   /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief Internal  oscillator (CSI) default value.
+  *        This value is the default CSI value after Reset.
+  */
+#if !defined  (CSI_VALUE)
+  #define CSI_VALUE    ((uint32_t)4000000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* CSI_VALUE */
+   
+/**
+  * @brief Internal High Speed oscillator (HSI) value.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSI is used as system clock source, directly or through the PLL). 
+  */
+#if !defined  (HSI_VALUE)
+  #define HSI_VALUE    ((uint32_t)64000000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+  * @brief External Low Speed oscillator (LSE) value.
+  *        This value is used by the UART, RTC HAL module to compute the system frequency
+  */
+#if !defined  (LSE_VALUE)
+  #define LSE_VALUE    ((uint32_t)32768U) /*!< Value of the External oscillator in Hz*/
+#endif /* LSE_VALUE */
+
+#if !defined  (LSE_STARTUP_TIMEOUT)
+  #define LSE_STARTUP_TIMEOUT    ((uint32_t)5000U)   /*!< Time out for LSE start up, in ms */
+#endif /* LSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief External clock source for I2S peripheral
+  *        This value is used by the I2S HAL module to compute the I2S clock source 
+  *        frequency, this source is inserted directly through I2S_CKIN pad. 
+  */
+#if !defined  (EXTERNAL_CLOCK_VALUE)
+  #define EXTERNAL_CLOCK_VALUE    12288000U /*!< Value of the External clock in Hz*/
+#endif /* EXTERNAL_CLOCK_VALUE */
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+   ===  you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+  * @brief This is the HAL system configuration section
+  */     
+#define  VDD_VALUE                    ((uint32_t)3300U) /*!< Value of VDD in mv */
+#define  TICK_INT_PRIORITY            ((uint32_t)0U) /*!< tick interrupt priority */
+#define  USE_RTOS                     0U
+#define  USE_SD_TRANSCEIVER           0U               /*!< use uSD Transceiver */
+
+#define  USE_HAL_ADC_REGISTER_CALLBACKS     0U /* ADC register callback disabled     */
+#define  USE_HAL_CEC_REGISTER_CALLBACKS     0U /* CEC register callback disabled     */
+#define  USE_HAL_COMP_REGISTER_CALLBACKS    0U /* COMP register callback disabled    */
+#define  USE_HAL_CRYP_REGISTER_CALLBACKS    0U /* CRYP register callback disabled    */
+#define  USE_HAL_DAC_REGISTER_CALLBACKS     0U /* DAC register callback disabled     */
+#define  USE_HAL_DCMI_REGISTER_CALLBACKS    0U /* DCMI register callback disabled    */
+#define  USE_HAL_DFSDM_REGISTER_CALLBACKS   0U /* DFSDM register callback disabled   */
+#define  USE_HAL_DMA2D_REGISTER_CALLBACKS   0U /* DMA2D register callback disabled   */
+#define  USE_HAL_DSI_REGISTER_CALLBACKS     0U /* DSI register callback disabled     */
+#define  USE_HAL_DTS_REGISTER_CALLBACKS     0U /* DTS register callback disabled     */
+#define  USE_HAL_ETH_REGISTER_CALLBACKS     0U /* ETH register callback disabled     */
+#define  USE_HAL_FDCAN_REGISTER_CALLBACKS   0U /* FDCAN register callback disabled   */
+#define  USE_HAL_NAND_REGISTER_CALLBACKS    0U /* NAND register callback disabled    */
+#define  USE_HAL_NOR_REGISTER_CALLBACKS     0U /* NOR register callback disabled     */
+#define  USE_HAL_SDRAM_REGISTER_CALLBACKS   0U /* SDRAM register callback disabled   */
+#define  USE_HAL_SRAM_REGISTER_CALLBACKS    0U /* SRAM register callback disabled    */
+#define  USE_HAL_HASH_REGISTER_CALLBACKS    0U /* HASH register callback disabled    */
+#define  USE_HAL_HCD_REGISTER_CALLBACKS     0U /* HCD register callback disabled     */
+#define  USE_HAL_GFXMMU_REGISTER_CALLBACKS  0U /* GFXMMU register callback disabled  */
+#define  USE_HAL_HRTIM_REGISTER_CALLBACKS   0U /* HRTIM register callback disabled   */
+#define  USE_HAL_I2C_REGISTER_CALLBACKS     0U /* I2C register callback disabled     */
+#define  USE_HAL_I2S_REGISTER_CALLBACKS     0U /* I2S register callback disabled     */
+#define  USE_HAL_IRDA_REGISTER_CALLBACKS    0U /* IRDA register callback disabled    */
+#define  USE_HAL_JPEG_REGISTER_CALLBACKS    0U /* JPEG register callback disabled    */
+#define  USE_HAL_LPTIM_REGISTER_CALLBACKS   0U /* LPTIM register callback disabled   */
+#define  USE_HAL_LTDC_REGISTER_CALLBACKS    0U /* LTDC register callback disabled    */
+#define  USE_HAL_MDIOS_REGISTER_CALLBACKS   0U /* MDIO register callback disabled    */
+#define  USE_HAL_MMC_REGISTER_CALLBACKS     0U /* MMC register callback disabled     */
+#define  USE_HAL_OPAMP_REGISTER_CALLBACKS   0U /* MDIO register callback disabled    */
+#define  USE_HAL_OSPI_REGISTER_CALLBACKS    0U /* OSPI register callback disabled    */
+#define  USE_HAL_OTFDEC_REGISTER_CALLBACKS  0U /* OTFDEC register callback disabled  */
+#define  USE_HAL_PCD_REGISTER_CALLBACKS     0U /* PCD register callback disabled     */
+#define  USE_HAL_QSPI_REGISTER_CALLBACKS    0U /* QSPI register callback disabled    */
+#define  USE_HAL_RNG_REGISTER_CALLBACKS     0U /* RNG register callback disabled     */
+#define  USE_HAL_RTC_REGISTER_CALLBACKS     0U /* RTC register callback disabled     */
+#define  USE_HAL_SAI_REGISTER_CALLBACKS     0U /* SAI register callback disabled     */
+#define  USE_HAL_SD_REGISTER_CALLBACKS      0U /* SD register callback disabled      */
+#define  USE_HAL_SMARTCARD_REGISTER_CALLBACKS  0U /* SMARTCARD register callback disabled */
+#define  USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */
+#define  USE_HAL_SMBUS_REGISTER_CALLBACKS   0U /* SMBUS register callback disabled   */
+#define  USE_HAL_SPI_REGISTER_CALLBACKS     0U /* SPI register callback disabled     */
+#define  USE_HAL_SWPMI_REGISTER_CALLBACKS   0U /* SWPMI register callback disabled   */
+#define  USE_HAL_TIM_REGISTER_CALLBACKS     0U /* TIM register callback disabled     */
+#define  USE_HAL_UART_REGISTER_CALLBACKS    0U /* UART register callback disabled    */
+#define  USE_HAL_USART_REGISTER_CALLBACKS   0U /* USART register callback disabled   */
+#define  USE_HAL_WWDG_REGISTER_CALLBACKS    0U /* WWDG register callback disabled    */
+
+/* ########################### Ethernet Configuration ######################### */
+#define ETH_TX_DESC_CNT         4  /* number of Ethernet Tx DMA descriptors */
+#define ETH_RX_DESC_CNT         4  /* number of Ethernet Rx DMA descriptors */
+
+#define ETH_MAC_ADDR0    ((uint8_t)0x02)
+#define ETH_MAC_ADDR1    ((uint8_t)0x00)
+#define ETH_MAC_ADDR2    ((uint8_t)0x00)
+#define ETH_MAC_ADDR3    ((uint8_t)0x00)
+#define ETH_MAC_ADDR4    ((uint8_t)0x00)
+#define ETH_MAC_ADDR5    ((uint8_t)0x00)
+
+/* ########################## Assert Selection ############################## */
+/**
+  * @brief Uncomment the line below to expanse the "assert_param" macro in the 
+  *        HAL drivers code
+  */
+/* #define USE_FULL_ASSERT    1U */ 
+
+/* Includes ------------------------------------------------------------------*/
+/**
+  * @brief Include module's header file 
+  */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+  #include "stm32h7xx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+  #include "stm32h7xx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+  #include "stm32h7xx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+
+#ifdef HAL_MDMA_MODULE_ENABLED
+ #include "stm32h7xx_hal_mdma.h"
+#endif /* HAL_MDMA_MODULE_ENABLED */
+
+#ifdef HAL_HASH_MODULE_ENABLED
+  #include "stm32h7xx_hal_hash.h"
+#endif /* HAL_HASH_MODULE_ENABLED */
+
+#ifdef HAL_DCMI_MODULE_ENABLED
+  #include "stm32h7xx_hal_dcmi.h"
+#endif /* HAL_DCMI_MODULE_ENABLED */
+
+#ifdef HAL_DMA2D_MODULE_ENABLED
+  #include "stm32h7xx_hal_dma2d.h"
+#endif /* HAL_DMA2D_MODULE_ENABLED */
+
+#ifdef HAL_DSI_MODULE_ENABLED
+  #include "stm32h7xx_hal_dsi.h"
+#endif /* HAL_DSI_MODULE_ENABLED */
+
+#ifdef HAL_DFSDM_MODULE_ENABLED
+  #include "stm32h7xx_hal_dfsdm.h"
+#endif /* HAL_DFSDM_MODULE_ENABLED */
+
+#ifdef HAL_ETH_MODULE_ENABLED
+  #include "stm32h7xx_hal_eth.h"
+#endif /* HAL_ETH_MODULE_ENABLED */
+
+#ifdef HAL_EXTI_MODULE_ENABLED
+  #include "stm32h7xx_hal_exti.h"
+#endif /* HAL_EXTI_MODULE_ENABLED */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+  #include "stm32h7xx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+  #include "stm32h7xx_hal_adc.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_FDCAN_MODULE_ENABLED
+  #include "stm32h7xx_hal_fdcan.h"
+#endif /* HAL_FDCAN_MODULE_ENABLED */
+
+#ifdef HAL_CEC_MODULE_ENABLED
+  #include "stm32h7xx_hal_cec.h"
+#endif /* HAL_CEC_MODULE_ENABLED */
+
+#ifdef HAL_COMP_MODULE_ENABLED
+  #include "stm32h7xx_hal_comp.h"
+#endif /* HAL_COMP_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+  #include "stm32h7xx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_CRYP_MODULE_ENABLED
+  #include "stm32h7xx_hal_cryp.h"
+#endif /* HAL_CRYP_MODULE_ENABLED */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+  #include "stm32h7xx_hal_dac.h"
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+  #include "stm32h7xx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+#ifdef HAL_GFXMMU_MODULE_ENABLED
+  #include "stm32h7xx_hal_gfxmmu.h"
+#endif /* HAL_GFXMMU_MODULE_ENABLED */
+
+#ifdef HAL_HRTIM_MODULE_ENABLED
+  #include "stm32h7xx_hal_hrtim.h"
+#endif /* HAL_HRTIM_MODULE_ENABLED */
+
+#ifdef HAL_HSEM_MODULE_ENABLED
+  #include "stm32h7xx_hal_hsem.h"
+#endif /* HAL_HSEM_MODULE_ENABLED */
+
+#ifdef HAL_SRAM_MODULE_ENABLED
+  #include "stm32h7xx_hal_sram.h"
+#endif /* HAL_SRAM_MODULE_ENABLED */
+
+#ifdef HAL_NOR_MODULE_ENABLED
+  #include "stm32h7xx_hal_nor.h"
+#endif /* HAL_NOR_MODULE_ENABLED */
+
+#ifdef HAL_NAND_MODULE_ENABLED
+  #include "stm32h7xx_hal_nand.h"
+#endif /* HAL_NAND_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+ #include "stm32h7xx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_I2S_MODULE_ENABLED
+ #include "stm32h7xx_hal_i2s.h"
+#endif /* HAL_I2S_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+ #include "stm32h7xx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_JPEG_MODULE_ENABLED
+ #include "stm32h7xx_hal_jpeg.h"
+#endif /* HAL_JPEG_MODULE_ENABLED */
+
+#ifdef HAL_MDIOS_MODULE_ENABLED
+ #include "stm32h7xx_hal_mdios.h"
+#endif /* HAL_MDIOS_MODULE_ENABLED */
+
+#ifdef HAL_MMC_MODULE_ENABLED
+ #include "stm32h7xx_hal_mmc.h"
+#endif /* HAL_MMC_MODULE_ENABLED */
+
+#ifdef HAL_LPTIM_MODULE_ENABLED
+#include "stm32h7xx_hal_lptim.h"
+#endif /* HAL_LPTIM_MODULE_ENABLED */
+
+#ifdef HAL_LTDC_MODULE_ENABLED
+#include "stm32h7xx_hal_ltdc.h"
+#endif /* HAL_LTDC_MODULE_ENABLED */
+
+#ifdef HAL_OPAMP_MODULE_ENABLED
+#include "stm32h7xx_hal_opamp.h"
+#endif /* HAL_OPAMP_MODULE_ENABLED */
+
+#ifdef HAL_OSPI_MODULE_ENABLED
+  #include "stm32h7xx_hal_ospi.h"
+#endif /* HAL_OSPI_MODULE_ENABLED */
+   
+#ifdef HAL_OTFDEC_MODULE_ENABLED
+#include "stm32h7xx_hal_otfdec.h"
+#endif /* HAL_OTFDEC_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+ #include "stm32h7xx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_QSPI_MODULE_ENABLED
+ #include "stm32h7xx_hal_qspi.h"
+#endif /* HAL_QSPI_MODULE_ENABLED */
+
+#ifdef HAL_RAMECC_MODULE_ENABLED
+ #include "stm32h7xx_hal_ramecc.h"
+#endif /* HAL_HCD_MODULE_ENABLED */
+
+#ifdef HAL_RNG_MODULE_ENABLED
+ #include "stm32h7xx_hal_rng.h"
+#endif /* HAL_RNG_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+ #include "stm32h7xx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_SAI_MODULE_ENABLED
+ #include "stm32h7xx_hal_sai.h"
+#endif /* HAL_SAI_MODULE_ENABLED */
+
+#ifdef HAL_SD_MODULE_ENABLED
+ #include "stm32h7xx_hal_sd.h"
+#endif /* HAL_SD_MODULE_ENABLED */
+
+#ifdef HAL_SDRAM_MODULE_ENABLED
+ #include "stm32h7xx_hal_sdram.h"
+#endif /* HAL_SDRAM_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+ #include "stm32h7xx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_SPDIFRX_MODULE_ENABLED
+ #include "stm32h7xx_hal_spdifrx.h"
+#endif /* HAL_SPDIFRX_MODULE_ENABLED */
+
+#ifdef HAL_SWPMI_MODULE_ENABLED
+ #include "stm32h7xx_hal_swpmi.h"
+#endif /* HAL_SWPMI_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+ #include "stm32h7xx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+ #include "stm32h7xx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+ #include "stm32h7xx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+ #include "stm32h7xx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+ #include "stm32h7xx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_SMBUS_MODULE_ENABLED
+ #include "stm32h7xx_hal_smbus.h"
+#endif /* HAL_SMBUS_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+ #include "stm32h7xx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+ #include "stm32h7xx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+#ifdef HAL_HCD_MODULE_ENABLED
+ #include "stm32h7xx_hal_hcd.h"
+#endif /* HAL_HCD_MODULE_ENABLED */
+
+#ifdef HAL_PSSI_MODULE_ENABLED
+  #include "stm32h7xx_hal_pssi.h"
+#endif /* HAL_PSSI_MODULE_ENABLED */
+
+#ifdef HAL_DTS_MODULE_ENABLED
+  #include "stm32h7xx_hal_dts.h"
+#endif /* HAL_DTS_MODULE_ENABLED */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef  USE_FULL_ASSERT
+/**
+  * @brief  The assert_param macro is used for function's parameters check.
+  * @param  expr: If expr is false, it calls assert_failed function
+  *         which reports the name of the source file and the source
+  *         line number of the call that failed. 
+  *         If expr is true, it returns no value.
+  * @retval None
+  */
+  #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+  void assert_failed(uint8_t* file, uint32_t line);
+#else
+  #define assert_param(expr) ((void)0U)
+#endif /* USE_FULL_ASSERT */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32H7xx_HAL_CONF_H */
+ 
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp/stm32/stm32h747-st-discovery/board/CubeMX_Config/CM7/Inc/stm32h7xx_it.h

+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    stm32h7xx_it.h
+  * @brief   This file contains the headers of the interrupt handlers.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+ ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32H7xx_IT_H
+#define __STM32H7xx_IT_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif 
+
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Exported types ------------------------------------------------------------*/
+/* USER CODE BEGIN ET */
+
+/* USER CODE END ET */
+
+/* Exported constants --------------------------------------------------------*/
+/* USER CODE BEGIN EC */
+
+/* USER CODE END EC */
+
+/* Exported macro ------------------------------------------------------------*/
+/* USER CODE BEGIN EM */
+
+/* USER CODE END EM */
+
+/* Exported functions prototypes ---------------------------------------------*/
+void NMI_Handler(void);
+void HardFault_Handler(void);
+void MemManage_Handler(void);
+void BusFault_Handler(void);
+void UsageFault_Handler(void);
+void SVC_Handler(void);
+void DebugMon_Handler(void);
+void PendSV_Handler(void);
+void SysTick_Handler(void);
+/* USER CODE BEGIN EFP */
+
+/* USER CODE END EFP */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32H7xx_IT_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp/stm32/stm32h747-st-discovery/board/CubeMX_Config/CM7/Src/main.c

+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file           : main.c
+  * @brief          : Main program body
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Private typedef -----------------------------------------------------------*/
+/* USER CODE BEGIN PTD */
+
+/* USER CODE END PTD */
+
+/* Private define ------------------------------------------------------------*/
+/* USER CODE BEGIN PD */
+ 
+#define HSEM_ID_0 (0U) /* HW semaphore 0*/
+/* USER CODE END PD */
+
+/* Private macro -------------------------------------------------------------*/
+/* USER CODE BEGIN PM */
+
+/* USER CODE END PM */
+
+/* Private variables ---------------------------------------------------------*/
+
+UART_HandleTypeDef huart1;
+
+/* USER CODE BEGIN PV */
+
+/* USER CODE END PV */
+
+/* Private function prototypes -----------------------------------------------*/
+void SystemClock_Config(void);
+static void MX_GPIO_Init(void);
+static void MX_USART1_UART_Init(void);
+/* USER CODE BEGIN PFP */
+
+/* USER CODE END PFP */
+
+/* Private user code ---------------------------------------------------------*/
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+/**
+  * @brief  The application entry point.
+  * @retval int
+  */
+int main(void)
+{
+  /* USER CODE BEGIN 1 */
+
+  /* USER CODE END 1 */
+   
+  /* USER CODE BEGIN Boot_Mode_Sequence_0 */
+    int32_t timeout; 
+  /* USER CODE END Boot_Mode_Sequence_0 */
+
+/* USER CODE BEGIN Boot_Mode_Sequence_1 */
+  /* Wait until CPU2 boots and enters in stop mode or timeout*/
+  timeout = 0xFFFF;
+  while((__HAL_RCC_GET_FLAG(RCC_FLAG_D2CKRDY) != RESET) && (timeout-- > 0));
+  if ( timeout < 0 )
+  {
+  Error_Handler();
+  }
+/* USER CODE END Boot_Mode_Sequence_1 */
+  /* MCU Configuration--------------------------------------------------------*/
+
+  /* Reset of all peripherals, Initializes the Flash interface and the Systick. */
+  HAL_Init();
+
+  /* USER CODE BEGIN Init */
+
+  /* USER CODE END Init */
+
+  /* Configure the system clock */
+  SystemClock_Config();
+/* USER CODE BEGIN Boot_Mode_Sequence_2 */
+/* When system initialization is finished, Cortex-M7 will release Cortex-M4 by means of
+HSEM notification */
+/*HW semaphore Clock enable*/
+__HAL_RCC_HSEM_CLK_ENABLE();
+/*Take HSEM */
+HAL_HSEM_FastTake(HSEM_ID_0);
+/*Release HSEM in order to notify the CPU2(CM4)*/
+HAL_HSEM_Release(HSEM_ID_0,0);
+/* wait until CPU2 wakes up from stop mode */
+timeout = 0xFFFF;
+while((__HAL_RCC_GET_FLAG(RCC_FLAG_D2CKRDY) == RESET) && (timeout-- > 0));
+if ( timeout < 0 )
+{
+Error_Handler();
+}
+/* USER CODE END Boot_Mode_Sequence_2 */
+
+  /* USER CODE BEGIN SysInit */
+
+  /* USER CODE END SysInit */
+
+  /* Initialize all configured peripherals */
+  MX_GPIO_Init();
+  MX_USART1_UART_Init();
+  /* USER CODE BEGIN 2 */
+
+  /* USER CODE END 2 */
+ 
+ 
+
+  /* Infinite loop */
+  /* USER CODE BEGIN WHILE */
+  while (1)
+  {
+    /* USER CODE END WHILE */
+
+    /* USER CODE BEGIN 3 */
+  }
+  /* USER CODE END 3 */
+}
+
+/**
+  * @brief System Clock Configuration
+  * @retval None
+  */
+void SystemClock_Config(void)
+{
+  RCC_OscInitTypeDef RCC_OscInitStruct = {0};
+  RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
+  RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0};
+
+  /** Supply configuration update enable 
+  */
+  HAL_PWREx_ConfigSupply(PWR_DIRECT_SMPS_SUPPLY);
+  /** Configure the main internal regulator output voltage 
+  */
+  __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
+
+  while(!__HAL_PWR_GET_FLAG(PWR_FLAG_VOSRDY)) {}
+  /** Initializes the CPU, AHB and APB busses clocks 
+  */
+  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
+  RCC_OscInitStruct.HSIState = RCC_HSI_DIV1;
+  RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
+  RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
+  if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /** Initializes the CPU, AHB and APB busses clocks 
+  */
+  RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
+                              |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2
+                              |RCC_CLOCKTYPE_D3PCLK1|RCC_CLOCKTYPE_D1PCLK1;
+  RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_HSI;
+  RCC_ClkInitStruct.SYSCLKDivider = RCC_SYSCLK_DIV1;
+  RCC_ClkInitStruct.AHBCLKDivider = RCC_HCLK_DIV1;
+  RCC_ClkInitStruct.APB3CLKDivider = RCC_APB3_DIV1;
+  RCC_ClkInitStruct.APB1CLKDivider = RCC_APB1_DIV1;
+  RCC_ClkInitStruct.APB2CLKDivider = RCC_APB2_DIV1;
+  RCC_ClkInitStruct.APB4CLKDivider = RCC_APB4_DIV1;
+
+  if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USART1;
+  PeriphClkInitStruct.Usart16ClockSelection = RCC_USART16CLKSOURCE_D2PCLK2;
+  if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK)
+  {
+    Error_Handler();
+  }
+}
+
+/**
+  * @brief USART1 Initialization Function
+  * @param None
+  * @retval None
+  */
+static void MX_USART1_UART_Init(void)
+{
+
+  /* USER CODE BEGIN USART1_Init 0 */
+
+  /* USER CODE END USART1_Init 0 */
+
+  /* USER CODE BEGIN USART1_Init 1 */
+
+  /* USER CODE END USART1_Init 1 */
+  huart1.Instance = USART1;
+  huart1.Init.BaudRate = 115200;
+  huart1.Init.WordLength = UART_WORDLENGTH_8B;
+  huart1.Init.StopBits = UART_STOPBITS_1;
+  huart1.Init.Parity = UART_PARITY_NONE;
+  huart1.Init.Mode = UART_MODE_TX_RX;
+  huart1.Init.HwFlowCtl = UART_HWCONTROL_NONE;
+  huart1.Init.OverSampling = UART_OVERSAMPLING_16;
+  huart1.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE;
+  huart1.Init.ClockPrescaler = UART_PRESCALER_DIV1;
+  huart1.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT;
+  if (HAL_UART_Init(&huart1) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  if (HAL_UARTEx_SetTxFifoThreshold(&huart1, UART_TXFIFO_THRESHOLD_1_8) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  if (HAL_UARTEx_SetRxFifoThreshold(&huart1, UART_RXFIFO_THRESHOLD_1_8) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  if (HAL_UARTEx_DisableFifoMode(&huart1) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN USART1_Init 2 */
+
+  /* USER CODE END USART1_Init 2 */
+
+}
+
+/**
+  * @brief GPIO Initialization Function
+  * @param None
+  * @retval None
+  */
+static void MX_GPIO_Init(void)
+{
+
+  /* GPIO Ports Clock Enable */
+  __HAL_RCC_GPIOA_CLK_ENABLE();
+  __HAL_RCC_GPIOH_CLK_ENABLE();
+
+}
+
+/* USER CODE BEGIN 4 */
+
+/* USER CODE END 4 */
+
+/**
+  * @brief  This function is executed in case of error occurrence.
+  * @retval None
+  */
+void Error_Handler(void)
+{
+  /* USER CODE BEGIN Error_Handler_Debug */
+  /* User can add his own implementation to report the HAL error return state */
+
+  /* USER CODE END Error_Handler_Debug */
+}
+
+#ifdef  USE_FULL_ASSERT
+/**
+  * @brief  Reports the name of the source file and the source line number
+  *         where the assert_param error has occurred.
+  * @param  file: pointer to the source file name
+  * @param  line: assert_param error line source number
+  * @retval None
+  */
+void assert_failed(uint8_t *file, uint32_t line)
+{ 
+  /* USER CODE BEGIN 6 */
+  /* User can add his own implementation to report the file name and line number,
+     tex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
+  /* USER CODE END 6 */
+}
+#endif /* USE_FULL_ASSERT */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp/stm32/stm32h747-st-discovery/board/CubeMX_Config/CM7/Src/stm32h7xx_hal_msp.c

+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * File Name          : stm32h7xx_hal_msp.c
+  * Description        : This file provides code for the MSP Initialization 
+  *                      and de-Initialization codes.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Private typedef -----------------------------------------------------------*/
+/* USER CODE BEGIN TD */
+
+/* USER CODE END TD */
+
+/* Private define ------------------------------------------------------------*/
+/* USER CODE BEGIN Define */
+ 
+/* USER CODE END Define */
+
+/* Private macro -------------------------------------------------------------*/
+/* USER CODE BEGIN Macro */
+
+/* USER CODE END Macro */
+
+/* Private variables ---------------------------------------------------------*/
+/* USER CODE BEGIN PV */
+
+/* USER CODE END PV */
+
+/* Private function prototypes -----------------------------------------------*/
+/* USER CODE BEGIN PFP */
+
+/* USER CODE END PFP */
+
+/* External functions --------------------------------------------------------*/
+/* USER CODE BEGIN ExternalFunctions */
+
+/* USER CODE END ExternalFunctions */
+
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+/**
+  * Initializes the Global MSP.
+  */
+void HAL_MspInit(void)
+{
+  /* USER CODE BEGIN MspInit 0 */
+
+  /* USER CODE END MspInit 0 */
+
+  __HAL_RCC_SYSCFG_CLK_ENABLE();
+
+  /* System interrupt init*/
+
+  /* USER CODE BEGIN MspInit 1 */
+
+  /* USER CODE END MspInit 1 */
+}
+
+/**
+* @brief UART MSP Initialization
+* This function configures the hardware resources used in this example
+* @param huart: UART handle pointer
+* @retval None
+*/
+void HAL_UART_MspInit(UART_HandleTypeDef* huart)
+{
+  GPIO_InitTypeDef GPIO_InitStruct = {0};
+  if(huart->Instance==USART1)
+  {
+  /* USER CODE BEGIN USART1_MspInit 0 */
+
+  /* USER CODE END USART1_MspInit 0 */
+    /* Peripheral clock enable */
+    __HAL_RCC_USART1_CLK_ENABLE();
+  
+    __HAL_RCC_GPIOA_CLK_ENABLE();
+    /**USART1 GPIO Configuration    
+    PA10     ------> USART1_RX
+    PA9     ------> USART1_TX 
+    */
+    GPIO_InitStruct.Pin = GPIO_PIN_10|GPIO_PIN_9;
+    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+    GPIO_InitStruct.Alternate = GPIO_AF7_USART1;
+    HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+
+  /* USER CODE BEGIN USART1_MspInit 1 */
+
+  /* USER CODE END USART1_MspInit 1 */
+  }
+
+}
+
+/**
+* @brief UART MSP De-Initialization
+* This function freeze the hardware resources used in this example
+* @param huart: UART handle pointer
+* @retval None
+*/
+void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
+{
+  if(huart->Instance==USART1)
+  {
+  /* USER CODE BEGIN USART1_MspDeInit 0 */
+
+  /* USER CODE END USART1_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_USART1_CLK_DISABLE();
+  
+    /**USART1 GPIO Configuration    
+    PA10     ------> USART1_RX
+    PA9     ------> USART1_TX 
+    */
+    HAL_GPIO_DeInit(GPIOA, GPIO_PIN_10|GPIO_PIN_9);
+
+  /* USER CODE BEGIN USART1_MspDeInit 1 */
+
+  /* USER CODE END USART1_MspDeInit 1 */
+  }
+
+}
+
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp/stm32/stm32h747-st-discovery/board/CubeMX_Config/CM7/Src/stm32h7xx_it.c

+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    stm32h7xx_it.c
+  * @brief   Interrupt Service Routines.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+#include "stm32h7xx_it.h"
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+/* USER CODE END Includes */
+
+/* Private typedef -----------------------------------------------------------*/
+/* USER CODE BEGIN TD */
+
+/* USER CODE END TD */
+
+/* Private define ------------------------------------------------------------*/
+/* USER CODE BEGIN PD */
+ 
+/* USER CODE END PD */
+
+/* Private macro -------------------------------------------------------------*/
+/* USER CODE BEGIN PM */
+
+/* USER CODE END PM */
+
+/* Private variables ---------------------------------------------------------*/
+/* USER CODE BEGIN PV */
+
+/* USER CODE END PV */
+
+/* Private function prototypes -----------------------------------------------*/
+/* USER CODE BEGIN PFP */
+
+/* USER CODE END PFP */
+
+/* Private user code ---------------------------------------------------------*/
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+/* External variables --------------------------------------------------------*/
+
+/* USER CODE BEGIN EV */
+
+/* USER CODE END EV */
+
+/******************************************************************************/
+/*           Cortex Processor Interruption and Exception Handlers          */ 
+/******************************************************************************/
+/**
+  * @brief This function handles Non maskable interrupt.
+  */
+void NMI_Handler(void)
+{
+  /* USER CODE BEGIN NonMaskableInt_IRQn 0 */
+
+  /* USER CODE END NonMaskableInt_IRQn 0 */
+  /* USER CODE BEGIN NonMaskableInt_IRQn 1 */
+
+  /* USER CODE END NonMaskableInt_IRQn 1 */
+}
+
+/**
+  * @brief This function handles Hard fault interrupt.
+  */
+void HardFault_Handler(void)
+{
+  /* USER CODE BEGIN HardFault_IRQn 0 */
+
+  /* USER CODE END HardFault_IRQn 0 */
+  while (1)
+  {
+    /* USER CODE BEGIN W1_HardFault_IRQn 0 */
+    /* USER CODE END W1_HardFault_IRQn 0 */
+  }
+}
+
+/**
+  * @brief This function handles Memory management fault.
+  */
+void MemManage_Handler(void)
+{
+  /* USER CODE BEGIN MemoryManagement_IRQn 0 */
+
+  /* USER CODE END MemoryManagement_IRQn 0 */
+  while (1)
+  {
+    /* USER CODE BEGIN W1_MemoryManagement_IRQn 0 */
+    /* USER CODE END W1_MemoryManagement_IRQn 0 */
+  }
+}
+
+/**
+  * @brief This function handles Pre-fetch fault, memory access fault.
+  */
+void BusFault_Handler(void)
+{
+  /* USER CODE BEGIN BusFault_IRQn 0 */
+
+  /* USER CODE END BusFault_IRQn 0 */
+  while (1)
+  {
+    /* USER CODE BEGIN W1_BusFault_IRQn 0 */
+    /* USER CODE END W1_BusFault_IRQn 0 */
+  }
+}
+
+/**
+  * @brief This function handles Undefined instruction or illegal state.
+  */
+void UsageFault_Handler(void)
+{
+  /* USER CODE BEGIN UsageFault_IRQn 0 */
+
+  /* USER CODE END UsageFault_IRQn 0 */
+  while (1)
+  {
+    /* USER CODE BEGIN W1_UsageFault_IRQn 0 */
+    /* USER CODE END W1_UsageFault_IRQn 0 */
+  }
+}
+
+/**
+  * @brief This function handles System service call via SWI instruction.
+  */
+void SVC_Handler(void)
+{
+  /* USER CODE BEGIN SVCall_IRQn 0 */
+
+  /* USER CODE END SVCall_IRQn 0 */
+  /* USER CODE BEGIN SVCall_IRQn 1 */
+
+  /* USER CODE END SVCall_IRQn 1 */
+}
+
+/**
+  * @brief This function handles Debug monitor.
+  */
+void DebugMon_Handler(void)
+{
+  /* USER CODE BEGIN DebugMonitor_IRQn 0 */
+
+  /* USER CODE END DebugMonitor_IRQn 0 */
+  /* USER CODE BEGIN DebugMonitor_IRQn 1 */
+
+  /* USER CODE END DebugMonitor_IRQn 1 */
+}
+
+/**
+  * @brief This function handles Pendable request for system service.
+  */
+void PendSV_Handler(void)
+{
+  /* USER CODE BEGIN PendSV_IRQn 0 */
+
+  /* USER CODE END PendSV_IRQn 0 */
+  /* USER CODE BEGIN PendSV_IRQn 1 */
+
+  /* USER CODE END PendSV_IRQn 1 */
+}
+
+/**
+  * @brief This function handles System tick timer.
+  */
+void SysTick_Handler(void)
+{
+  /* USER CODE BEGIN SysTick_IRQn 0 */
+
+  /* USER CODE END SysTick_IRQn 0 */
+  HAL_IncTick();
+  /* USER CODE BEGIN SysTick_IRQn 1 */
+
+  /* USER CODE END SysTick_IRQn 1 */
+}
+
+/******************************************************************************/
+/* STM32H7xx Peripheral Interrupt Handlers                                    */
+/* Add here the Interrupt Handlers for the used peripherals.                  */
+/* For the available peripheral interrupt handler names,                      */
+/* please refer to the startup file (startup_stm32h7xx.s).                    */
+/******************************************************************************/
+
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp/stm32/stm32h747-st-discovery/board/CubeMX_Config/Common/Src/system_stm32h7xx_dualcore_boot_cm4_cm7.c

+/**
+  ******************************************************************************
+  * @file    system_stm32h7xx_dualcore_boot_cm4_cm7.c
+  * @author  MCD Application Team
+  * @brief   CMSIS Cortex-Mx Device Peripheral Access Layer System Source File.
+  *          This provides system initialization template function is case of
+  *          an application using a dual core STM32H7 device where
+  *          Cortex-M7 and Cortex-M4 boot are enabled at the FLASH option bytes
+  *
+  *   This file provides two functions and one global variable to be called from
+  *   user application:
+  *      - SystemInit(): This function is called at startup just after reset and
+  *                      before branch to main program. This call is made inside
+  *                      the "startup_stm32h7xx.s" file.
+  *
+  *      - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
+  *                                  by the user application to setup the SysTick
+  *                                  timer or configure other parameters.
+  *
+  *      - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
+  *                                 be called whenever the core clock is changed
+  *                                 during program execution.
+  *
+  *
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32h7xx_system
+  * @{
+  */
+
+/** @addtogroup STM32H7xx_System_Private_Includes
+  * @{
+  */
+
+#include "stm32h7xx.h"
+#include <math.h>
+
+#if !defined  (HSE_VALUE)
+#define HSE_VALUE    ((uint32_t)25000000) /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined  (CSI_VALUE)
+  #define CSI_VALUE    ((uint32_t)4000000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* CSI_VALUE */
+
+#if !defined  (HSI_VALUE)
+  #define HSI_VALUE    ((uint32_t)64000000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32H7xx_System_Private_TypesDefinitions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32H7xx_System_Private_Defines
+  * @{
+  */
+
+/************************* Miscellaneous Configuration ************************/
+/*!< Uncomment the following line if you need to relocate your vector Table in
+     Internal SRAM. */
+/* #define VECT_TAB_SRAM */
+#define VECT_TAB_OFFSET  0x00000000UL /*!< Vector Table base offset field.
+                                      This value must be a multiple of 0x200. */
+/******************************************************************************/
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32H7xx_System_Private_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32H7xx_System_Private_Variables
+  * @{
+  */
+  /* This variable is updated in three ways:
+      1) by calling CMSIS function SystemCoreClockUpdate()
+      2) by calling HAL API function HAL_RCC_GetHCLKFreq()
+      3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
+         Note: If you use this function to configure the system clock; then there
+               is no need to call the 2 first functions listed above, since SystemCoreClock
+               variable is updated automatically.
+  */
+  uint32_t SystemCoreClock = 64000000;
+  uint32_t SystemD2Clock = 64000000;
+  const  uint8_t D1CorePrescTable[16] = {0, 0, 0, 0, 1, 2, 3, 4, 1, 2, 3, 4, 6, 7, 8, 9};
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32H7xx_System_Private_FunctionPrototypes
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32H7xx_System_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  Setup the microcontroller system
+  *         Initialize the FPU setting and  vector table location
+  *         configuration.
+  * @param  None
+  * @retval None
+  */
+void SystemInit (void)
+{
+  /* FPU settings ------------------------------------------------------------*/
+  #if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+    SCB->CPACR |= ((3UL << (10*2))|(3UL << (11*2)));  /* set CP10 and CP11 Full Access */
+  #endif
+
+    /*SEVONPEND enabled so that an interrupt coming from the CPU(n) interrupt signal is
+     detectable by the CPU after a WFI/WFE instruction.*/
+ SCB->SCR |= SCB_SCR_SEVONPEND_Pos;
+
+#ifdef CORE_CM7
+  /* Reset the RCC clock configuration to the default reset state ------------*/
+  /* Set HSION bit */
+  RCC->CR |= RCC_CR_HSION;
+
+  /* Reset CFGR register */
+  RCC->CFGR = 0x00000000;
+
+  /* Reset HSEON, CSSON , CSION,RC48ON, CSIKERON PLL1ON, PLL2ON and PLL3ON bits */
+  RCC->CR &= 0xEAF6ED7FU;
+
+  /* Reset D1CFGR register */
+  RCC->D1CFGR = 0x00000000;
+
+  /* Reset D2CFGR register */
+  RCC->D2CFGR = 0x00000000;
+
+  /* Reset D3CFGR register */
+  RCC->D3CFGR = 0x00000000;
+
+  /* Reset PLLCKSELR register */
+  RCC->PLLCKSELR = 0x00000000;
+
+  /* Reset PLLCFGR register */
+  RCC->PLLCFGR = 0x00000000;
+  /* Reset PLL1DIVR register */
+  RCC->PLL1DIVR = 0x00000000;
+  /* Reset PLL1FRACR register */
+  RCC->PLL1FRACR = 0x00000000;
+
+  /* Reset PLL2DIVR register */
+  RCC->PLL2DIVR = 0x00000000;
+
+  /* Reset PLL2FRACR register */
+
+  RCC->PLL2FRACR = 0x00000000;
+  /* Reset PLL3DIVR register */
+  RCC->PLL3DIVR = 0x00000000;
+
+  /* Reset PLL3FRACR register */
+  RCC->PLL3FRACR = 0x00000000;
+
+  /* Reset HSEBYP bit */
+  RCC->CR &= 0xFFFBFFFFU;
+
+  /* Disable all interrupts */
+  RCC->CIER = 0x00000000;
+
+  /* Enable CortexM7 HSEM EXTI line (line 78)*/
+  EXTI_D2->EMR3 |= 0x4000UL;
+
+
+  if((DBGMCU->IDCODE & 0xFFFF0000U) < 0x20000000U)
+  {
+    /* if stm32h7 revY*/
+    /* Change  the switch matrix read issuing capability to 1 for the AXI SRAM target (Target 7) */
+    *((__IO uint32_t*)0x51008108) = 0x000000001U;
+  }
+
+#endif /* CORE_CM7*/
+
+#ifdef CORE_CM4
+
+  /* Configure the Vector Table location add offset address ------------------*/
+#ifdef VECT_TAB_SRAM
+  SCB->VTOR = D2_AHBSRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
+#else
+  SCB->VTOR = FLASH_BANK2_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */
+#endif
+
+#else
+#ifdef CORE_CM7
+
+  /* Configure the Vector Table location add offset address ------------------*/
+#ifdef VECT_TAB_SRAM
+  SCB->VTOR = D1_AXISRAM_BASE  | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal D1 AXI-RAM */
+#else
+  SCB->VTOR = FLASH_BANK1_BASE | VECT_TAB_OFFSET;       /* Vector Table Relocation in Internal FLASH */
+#endif
+
+#else
+#error Please #define CORE_CM4 or CORE_CM7
+#endif
+#endif
+
+}
+
+/**
+   * @brief  Update SystemCoreClock variable according to Clock Register Values.
+  *         The SystemCoreClock variable contains the core clock , it can
+  *         be used by the user application to setup the SysTick timer or configure
+  *         other parameters.
+  *
+  * @note   Each time the core clock changes, this function must be called
+  *         to update SystemCoreClock variable value. Otherwise, any configuration
+  *         based on this variable will be incorrect.
+  *
+  * @note   - The system frequency computed by this function is not the real
+  *           frequency in the chip. It is calculated based on the predefined
+  *           constant and the selected clock source:
+  *
+  *           - If SYSCLK source is CSI, SystemCoreClock will contain the CSI_VALUE(*)
+  *           - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(**)
+  *           - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(***)
+  *           - If SYSCLK source is PLL, SystemCoreClock will contain the CSI_VALUE(*),
+  *             HSI_VALUE(**) or HSE_VALUE(***) multiplied/divided by the PLL factors.
+  *
+  *         (*) CSI_VALUE is a constant defined in stm32h7xx_hal.h file (default value
+  *             4 MHz) but the real value may vary depending on the variations
+  *             in voltage and temperature.
+  *         (**) HSI_VALUE is a constant defined in stm32h7xx_hal.h file (default value
+  *             64 MHz) but the real value may vary depending on the variations
+  *             in voltage and temperature.
+  *
+  *         (***)HSE_VALUE is a constant defined in stm32h7xx_hal.h file (default value
+  *              25 MHz), user has to ensure that HSE_VALUE is same as the real
+  *              frequency of the crystal used. Otherwise, this function may
+  *              have wrong result.
+  *
+  *         - The result of this function could be not correct when using fractional
+  *           value for HSE crystal.
+  * @param  None
+  * @retval None
+  */
+void SystemCoreClockUpdate (void)
+{
+  uint32_t pllp, pllsource, pllm, pllfracen, hsivalue, tmp;
+  float_t fracn1, pllvco;
+
+  /* Get SYSCLK source -------------------------------------------------------*/
+
+  switch (RCC->CFGR & RCC_CFGR_SWS)
+  {
+  case RCC_CFGR_SWS_HSI:  /* HSI used as system clock source */
+   SystemCoreClock = (uint32_t) (HSI_VALUE >> ((RCC->CR & RCC_CR_HSIDIV)>> 3));
+
+    break;
+
+  case RCC_CFGR_SWS_CSI:  /* CSI used as system clock  source */
+    SystemCoreClock = CSI_VALUE;
+    break;
+
+  case RCC_CFGR_SWS_HSE:  /* HSE used as system clock  source */
+    SystemCoreClock = HSE_VALUE;
+    break;
+
+  case RCC_CFGR_SWS_PLL1:  /* PLL1 used as system clock  source */
+
+    /* PLL_VCO = (HSE_VALUE or HSI_VALUE or CSI_VALUE/ PLLM) * PLLN
+    SYSCLK = PLL_VCO / PLLR
+    */
+    pllsource = (RCC->PLLCKSELR & RCC_PLLCKSELR_PLLSRC);
+    pllm = ((RCC->PLLCKSELR & RCC_PLLCKSELR_DIVM1)>> 4)  ;
+    pllfracen = ((RCC->PLLCFGR & RCC_PLLCFGR_PLL1FRACEN)>>RCC_PLLCFGR_PLL1FRACEN_Pos);
+    fracn1 = (float_t)(uint32_t)(pllfracen* ((RCC->PLL1FRACR & RCC_PLL1FRACR_FRACN1)>> 3));
+
+    if (pllm != 0U)
+    {
+      switch (pllsource)
+      {
+        case RCC_PLLCKSELR_PLLSRC_HSI:  /* HSI used as PLL clock source */
+
+        hsivalue = (HSI_VALUE >> ((RCC->CR & RCC_CR_HSIDIV)>> 3)) ;
+        pllvco = ( (float_t)hsivalue / (float_t)pllm) * ((float_t)(uint32_t)(RCC->PLL1DIVR & RCC_PLL1DIVR_N1) + (fracn1/(float_t)0x2000) +(float_t)1 );
+
+        break;
+
+        case RCC_PLLCKSELR_PLLSRC_CSI:  /* CSI used as PLL clock source */
+          pllvco = ((float_t)CSI_VALUE / (float_t)pllm) * ((float_t)(uint32_t)(RCC->PLL1DIVR & RCC_PLL1DIVR_N1) + (fracn1/(float_t)0x2000) +(float_t)1 );
+        break;
+
+        case RCC_PLLCKSELR_PLLSRC_HSE:  /* HSE used as PLL clock source */
+          pllvco = ((float_t)HSE_VALUE / (float_t)pllm) * ((float_t)(uint32_t)(RCC->PLL1DIVR & RCC_PLL1DIVR_N1) + (fracn1/(float_t)0x2000) +(float_t)1 );
+        break;
+
+      default:
+          pllvco = ((float_t)CSI_VALUE / (float_t)pllm) * ((float_t)(uint32_t)(RCC->PLL1DIVR & RCC_PLL1DIVR_N1) + (fracn1/(float_t)0x2000) +(float_t)1 );
+        break;
+      }
+      pllp = (((RCC->PLL1DIVR & RCC_PLL1DIVR_P1) >>9) + 1U ) ;
+      SystemCoreClock =  (uint32_t)(float_t)(pllvco/(float_t)pllp);
+    }
+    else
+    {
+      SystemCoreClock = 0U;
+    }
+    break;
+
+  default:
+    SystemCoreClock = CSI_VALUE;
+    break;
+  }
+
+  /* Compute SystemClock frequency --------------------------------------------------*/
+  tmp = D1CorePrescTable[(RCC->D1CFGR & RCC_D1CFGR_D1CPRE)>> RCC_D1CFGR_D1CPRE_Pos];
+
+  /* SystemCoreClock frequency : CM7 CPU frequency  */
+  SystemCoreClock >>= tmp;
+
+  /* SystemD2Clock frequency : CM4 CPU, AXI and AHBs Clock frequency  */
+  SystemD2Clock = (SystemCoreClock >> ((D1CorePrescTable[(RCC->D1CFGR & RCC_D1CFGR_HPRE)>> RCC_D1CFGR_HPRE_Pos]) & 0x1FU));
+
+}
+
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp/stm32/stm32h747-st-discovery/board/CubeMX_Config/CubeMX_Config.ioc

+#MicroXplorer Configuration settings - do not modify
+CortexM4.IPs=DEBUG,FATFS_M4\:I,FREERTOS_M4\:I,IWDG2\:I,PDM2PCM_M4\:I,PWR,RCC,RESMGR_UTILITY,SYS_M4\:I,USB_DEVICE_M4\:I,USB_HOST_M4\:I,WWDG2\:I,DMA,BDMA,MDMA,NVIC2\:I
+CortexM7.IPs=CORTEX_M7\:I,DEBUG\:I,FATFS_M7\:I,FREERTOS_M7\:I,IWDG1\:I,PDM2PCM_M7\:I,PWR\:I,RCC\:I,RESMGR_UTILITY\:I,SYS\:I,USB_DEVICE_M7\:I,USB_HOST_M7\:I,WWDG1\:I,DMA\:I,BDMA\:I,MDMA\:I,NVIC1\:I,USART1\:I
+File.Version=6
+GPIO.groupedBy=Group By Peripherals
+KeepUserPlacement=false
+Mcu.Context0=CortexM7
+Mcu.Context1=CortexM4
+Mcu.ContextNb=2
+Mcu.Family=STM32H7
+Mcu.IP0=CORTEX_M7
+Mcu.IP1=NVIC1
+Mcu.IP2=NVIC2
+Mcu.IP3=RCC
+Mcu.IP4=SYS
+Mcu.IP5=SYS_M4
+Mcu.IP6=USART1
+Mcu.IPNb=7
+Mcu.Name=STM32H747XIHx
+Mcu.Package=TFBGA240
+Mcu.Pin0=PA10
+Mcu.Pin1=PA9
+Mcu.Pin2=PH1-OSC_OUT (PH1)
+Mcu.Pin3=PH0-OSC_IN (PH0)
+Mcu.Pin4=VP_SYS_VS_Systick
+Mcu.Pin5=VP_SYS_M4_VS_Systick
+Mcu.PinsNb=6
+Mcu.ThirdPartyNb=0
+Mcu.UserConstants=
+Mcu.UserName=STM32H747XIHx
+MxCube.Version=5.5.0
+MxDb.Version=DB.5.0.50
+NVIC1.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+NVIC1.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+NVIC1.ForceEnableDMAVector=true
+NVIC1.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+NVIC1.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+NVIC1.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+NVIC1.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+NVIC1.PriorityGroup=NVIC_PRIORITYGROUP_4
+NVIC1.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+NVIC1.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false\:true
+NVIC1.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+NVIC2.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+NVIC2.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+NVIC2.ForceEnableDMAVector=true
+NVIC2.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+NVIC2.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+NVIC2.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+NVIC2.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+NVIC2.PriorityGroup=NVIC_PRIORITYGROUP_4
+NVIC2.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+NVIC2.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false\:true
+NVIC2.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+PA10.GPIOParameters=PinAttribute
+PA10.Locked=true
+PA10.Mode=Asynchronous
+PA10.PinAttribute=CortexM7
+PA10.Signal=USART1_RX
+PA9.GPIOParameters=PinAttribute
+PA9.Locked=true
+PA9.Mode=Asynchronous
+PA9.PinAttribute=CortexM7
+PA9.Signal=USART1_TX
+PCC.Checker=true
+PCC.Line=STM32H747/757
+PCC.MCU=STM32H747XIHx
+PCC.PartNumber=STM32H747XIHx
+PCC.Seq0=0
+PCC.Series=STM32H7
+PCC.Temperature=25
+PCC.Vdd=3.0
+PH0-OSC_IN\ (PH0).GPIOParameters=PinAttribute
+PH0-OSC_IN\ (PH0).Mode=HSE-External-Oscillator
+PH0-OSC_IN\ (PH0).PinAttribute=CortexM7
+PH0-OSC_IN\ (PH0).Signal=RCC_OSC_IN
+PH1-OSC_OUT\ (PH1).GPIOParameters=PinAttribute
+PH1-OSC_OUT\ (PH1).Mode=HSE-External-Oscillator
+PH1-OSC_OUT\ (PH1).PinAttribute=CortexM7
+PH1-OSC_OUT\ (PH1).Signal=RCC_OSC_OUT
+PinOutPanel.CurrentBGAView=Top
+PinOutPanel.RotationAngle=0
+ProjectManager.AskForMigrate=true
+ProjectManager.BackupPrevious=false
+ProjectManager.BootMode=boot0
+ProjectManager.CompilerOptimize=6
+ProjectManager.ComputerToolchain=false
+ProjectManager.CoupleFile=false
+ProjectManager.CustomerFirmwarePackage=
+ProjectManager.DefaultFWLocation=true
+ProjectManager.DeletePrevious=true
+ProjectManager.DeviceId=STM32H747XIHx
+ProjectManager.FirmwarePackage=STM32Cube FW_H7 V1.6.0
+ProjectManager.FreePins=false
+ProjectManager.HalAssertFull=false
+ProjectManager.HeapSize=0x200
+ProjectManager.KeepUserCode=true
+ProjectManager.LastFirmware=true
+ProjectManager.LibraryCopy=0
+ProjectManager.MainLocation=Src
+ProjectManager.NoMain=false
+ProjectManager.PreviousToolchain=
+ProjectManager.ProjectBuild=false
+ProjectManager.ProjectFileName=CubeMX_Config.ioc
+ProjectManager.ProjectName=CubeMX_Config
+ProjectManager.StackSize=0x400
+ProjectManager.TargetToolchain=MDK-ARM V5
+ProjectManager.ToolChainLocation=
+ProjectManager.UnderRoot=false
+ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true-CortexM7,2-SystemClock_Config-RCC-false-HAL-false-CortexM7,3-MX_CORTEX_M7_Init-CORTEX_M7-false-HAL-true-CortexM7,4-MX_USART1_UART_Init-USART1-false-HAL-true-CortexM7
+RCC.ADCFreq_Value=129000000
+RCC.AHB12Freq_Value=64000000
+RCC.AHB4Freq_Value=64000000
+RCC.APB1Freq_Value=64000000
+RCC.APB2Freq_Value=64000000
+RCC.APB3Freq_Value=64000000
+RCC.APB4Freq_Value=64000000
+RCC.AXIClockFreq_Value=64000000
+RCC.CECFreq_Value=32000
+RCC.CKPERFreq_Value=64000000
+RCC.CPU2Freq_Value=64000000
+RCC.CPU2SystikFreq_Value=64000000
+RCC.CortexFreq_Value=64000000
+RCC.CpuClockFreq_Value=64000000
+RCC.D1CPREFreq_Value=64000000
+RCC.DFSDMACLkFreq_Value=129000000
+RCC.DFSDMFreq_Value=64000000
+RCC.DIVP1Freq_Value=129000000
+RCC.DIVP2Freq_Value=129000000
+RCC.DIVP3Freq_Value=129000000
+RCC.DIVQ1Freq_Value=129000000
+RCC.DIVQ2Freq_Value=129000000
+RCC.DIVQ3Freq_Value=129000000
+RCC.DIVR1Freq_Value=129000000
+RCC.DIVR2Freq_Value=129000000
+RCC.DIVR3Freq_Value=129000000
+RCC.DSIFreq_Value=62500000
+RCC.DSITXEscFreq_Value=15625000
+RCC.FDCANFreq_Value=129000000
+RCC.FMCFreq_Value=64000000
+RCC.FamilyName=M
+RCC.HCLK3ClockFreq_Value=64000000
+RCC.HCLKFreq_Value=64000000
+RCC.HRTIMFreq_Value=64000000
+RCC.I2C123Freq_Value=64000000
+RCC.I2C4Freq_Value=64000000
+RCC.IPParameters=ADCFreq_Value,AHB12Freq_Value,AHB4Freq_Value,APB1Freq_Value,APB2Freq_Value,APB3Freq_Value,APB4Freq_Value,AXIClockFreq_Value,CECFreq_Value,CKPERFreq_Value,CPU2Freq_Value,CPU2SystikFreq_Value,CortexFreq_Value,CpuClockFreq_Value,D1CPREFreq_Value,DFSDMACLkFreq_Value,DFSDMFreq_Value,DIVP1Freq_Value,DIVP2Freq_Value,DIVP3Freq_Value,DIVQ1Freq_Value,DIVQ2Freq_Value,DIVQ3Freq_Value,DIVR1Freq_Value,DIVR2Freq_Value,DIVR3Freq_Value,DSIFreq_Value,DSITXEscFreq_Value,FDCANFreq_Value,FMCFreq_Value,FamilyName,HCLK3ClockFreq_Value,HCLKFreq_Value,HRTIMFreq_Value,I2C123Freq_Value,I2C4Freq_Value,LPTIM1Freq_Value,LPTIM2Freq_Value,LPTIM345Freq_Value,LPUART1Freq_Value,LTDCFreq_Value,MCO1PinFreq_Value,MCO2PinFreq_Value,PLLDSIVCOFreq_Value,PWR_Regulator_Voltage_Scale,QSPIFreq_Value,RNGFreq_Value,RTCFreq_Value,SAI1Freq_Value,SAI23Freq_Value,SAI4AFreq_Value,SAI4BFreq_Value,SDMMCFreq_Value,SPDIFRXFreq_Value,SPI123Freq_Value,SPI45Freq_Value,SPI6Freq_Value,SWPMI1Freq_Value,SYSCLKFreq_VALUE,SupplySource,Tim1OutputFreq_Value,Tim2OutputFreq_Value,TraceFreq_Value,USART16Freq_Value,USART234578Freq_Value,USBFreq_Value,VCO1OutputFreq_Value,VCO2OutputFreq_Value,VCO3OutputFreq_Value,VCOInput1Freq_Value,VCOInput2Freq_Value,VCOInput3Freq_Value
+RCC.LPTIM1Freq_Value=64000000
+RCC.LPTIM2Freq_Value=64000000
+RCC.LPTIM345Freq_Value=64000000
+RCC.LPUART1Freq_Value=64000000
+RCC.LTDCFreq_Value=129000000
+RCC.MCO1PinFreq_Value=64000000
+RCC.MCO2PinFreq_Value=64000000
+RCC.PLLDSIVCOFreq_Value=1000000000
+RCC.PWR_Regulator_Voltage_Scale=PWR_REGULATOR_VOLTAGE_SCALE1
+RCC.QSPIFreq_Value=64000000
+RCC.RNGFreq_Value=48000000
+RCC.RTCFreq_Value=32000
+RCC.SAI1Freq_Value=129000000
+RCC.SAI23Freq_Value=129000000
+RCC.SAI4AFreq_Value=129000000
+RCC.SAI4BFreq_Value=129000000
+RCC.SDMMCFreq_Value=129000000
+RCC.SPDIFRXFreq_Value=129000000
+RCC.SPI123Freq_Value=129000000
+RCC.SPI45Freq_Value=64000000
+RCC.SPI6Freq_Value=64000000
+RCC.SWPMI1Freq_Value=64000000
+RCC.SYSCLKFreq_VALUE=64000000
+RCC.SupplySource=PWR_DIRECT_SMPS_SUPPLY
+RCC.Tim1OutputFreq_Value=64000000
+RCC.Tim2OutputFreq_Value=64000000
+RCC.TraceFreq_Value=64000000
+RCC.USART16Freq_Value=64000000
+RCC.USART234578Freq_Value=64000000
+RCC.USBFreq_Value=129000000
+RCC.VCO1OutputFreq_Value=258000000
+RCC.VCO2OutputFreq_Value=258000000
+RCC.VCO3OutputFreq_Value=258000000
+RCC.VCOInput1Freq_Value=2000000
+RCC.VCOInput2Freq_Value=2000000
+RCC.VCOInput3Freq_Value=2000000
+USART1.IPParameters=VirtualMode-Asynchronous
+USART1.VirtualMode-Asynchronous=VM_ASYNC
+VP_SYS_M4_VS_Systick.Mode=SysTick
+VP_SYS_M4_VS_Systick.Signal=SYS_M4_VS_Systick
+VP_SYS_VS_Systick.Mode=SysTick
+VP_SYS_VS_Systick.Signal=SYS_VS_Systick
+board=custom

bsp/stm32/stm32h747-st-discovery/board/CubeMX_Config/MDK-ARM/CubeMX_Config.uvoptx

+<?xml version="1.0" encoding="UTF-8"?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+	<Target>
+		<TargetName>CubeMX_Config_CM4</TargetName>
+		<ToolsetNumber>0x4</ToolsetNumber>
+		<ToolsetName>ARM-ADS</ToolsetName>
+		<TargetOption>
+			<CLKADS>64000000</CLKADS>
+			<OPTTT>
+				<gFlags>1</gFlags>
+				<BeepAtEnd>1</BeepAtEnd>
+				<RunSim>0</RunSim>
+				<RunTarget>1</RunTarget>
+			</OPTTT>
+			<OPTHX>
+				<HexSelection>1</HexSelection>
+				<FlashByte>65535</FlashByte>
+				<HexRangeLowAddress>0</HexRangeLowAddress>
+				<HexRangeHighAddress>0</HexRangeHighAddress>
+				<HexOffset>0</HexOffset>
+			</OPTHX>
+			<OPTLEX>
+				<PageWidth>79</PageWidth>
+				<PageLength>66</PageLength>
+				<TabStop>8</TabStop>
+				<ListingPath />
+			</OPTLEX>
+			<ListingPage>
+				<CreateCListing>1</CreateCListing>
+				<CreateAListing>1</CreateAListing>
+				<CreateLListing>1</CreateLListing>
+				<CreateIListing>0</CreateIListing>
+				<AsmCond>1</AsmCond>
+				<AsmSymb>1</AsmSymb>
+				<AsmXref>0</AsmXref>
+				<CCond>1</CCond>
+				<CCode>0</CCode>
+				<CListInc>0</CListInc>
+				<CSymb>0</CSymb>
+				<LinkerCodeListing>0</LinkerCodeListing>
+			</ListingPage>
+			<OPTXL>
+				<LMap>1</LMap>
+				<LComments>1</LComments>
+				<LGenerateSymbols>1</LGenerateSymbols>
+				<LLibSym>1</LLibSym>
+				<LLines>1</LLines>
+				<LLocSym>1</LLocSym>
+				<LPubSym>1</LPubSym>
+				<LXref>0</LXref>
+				<LExpSel>0</LExpSel>
+			</OPTXL>
+			<OPTFL>
+				<tvExp>0</tvExp>
+				<tvExpOptDlg>0</tvExpOptDlg>
+				<IsCurrentTarget>1</IsCurrentTarget>
+			</OPTFL>
+			<CpuCode>0</CpuCode>
+			<DebugOpt>
+				<uSim>0</uSim>
+				<uTrg>1</uTrg>
+				<sLdApp>1</sLdApp>
+				<sGomain>1</sGomain>
+				<sRbreak>1</sRbreak>
+				<sRwatch>1</sRwatch>
+				<sRmem>1</sRmem>
+				<sRfunc>1</sRfunc>
+				<sRbox>1</sRbox>
+				<tLdApp>1</tLdApp>
+				<tGomain>1</tGomain>
+				<tRbreak>1</tRbreak>
+				<tRwatch>1</tRwatch>
+				<tRmem>1</tRmem>
+				<tRfunc>1</tRfunc>
+				<tRbox>1</tRbox>
+				<sRunDeb>0</sRunDeb>
+				<sLrtime>0</sLrtime>
+				<nTsel>13</nTsel>
+				<sDll />
+				<sDllPa />
+				<sDlgDll />
+				<sDlgPa />
+				<sIfile />
+				<tDll />
+				<tDllPa />
+				<tDlgDll />
+				<tDlgPa />
+				<tIfile />
+				<pMon>STLink\ST-LINKIII-KEIL_SWO.dll</pMon>
+			</DebugOpt>
+			<TargetDriverDllRegistry>
+				<SetRegEntry>
+					<Number>0</Number>
+					<Key>ST-LINKIII-KEIL_SWO</Key>
+					<Name>-U-O142 -O2254 -S0 -C0 -N00("ARM CoreSight SW-DP") -D00(5BA02477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO7 -FD20000000 -FC1000 -FN1 -FF0STM32H7xx.FLM -FS08000000 -FL0200000 -FP0($$Device:STM32H747XI$Flash\STM32H7xx.FLM)</Name>
+				</SetRegEntry>
+				<SetRegEntry>
+					<Number>0</Number>
+					<Key />
+					<Name>-U-O142 -O2254 -S0 -C0 -N00("ARM CoreSight SW-DP") -D00(5BA02477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO7 -FD20000000 -FC1000 -FN1 -FF0STM32H7xx.FLM -FS08000000 -FL0200000 -FP0($$Device:STM32H747XI$Flash\STM32H7xx.FLM)</Name>
+				</SetRegEntry>
+			</TargetDriverDllRegistry>
+			<DebugFlag>
+				<trace>0</trace>
+				<periodic>1</periodic>
+				<aLwin>0</aLwin>
+				<aCover>0</aCover>
+				<aSer1>0</aSer1>
+				<aSer2>0</aSer2>
+				<aPa>0</aPa>
+				<viewmode>0</viewmode>
+				<vrSel>0</vrSel>
+				<aSym>0</aSym>
+				<aTbox>0</aTbox>
+				<AscS1>0</AscS1>
+				<AscS2>0</AscS2>
+				<AscS3>0</AscS3>
+				<aSer3>0</aSer3>
+				<eProf>0</eProf>
+				<aLa>0</aLa>
+				<aPa1>0</aPa1>
+				<AscS4>0</AscS4>
+				<aSer4>0</aSer4>
+				<StkLoc>0</StkLoc>
+				<TrcWin>0</TrcWin>
+				<newCpu>0</newCpu>
+				<uProt>0</uProt>
+			</DebugFlag>
+			<LintExecutable />
+			<LintConfigFile />
+		</TargetOption>
+	</Target>
+<Target>
+		<TargetName>CubeMX_Config_CM7</TargetName>
+		<ToolsetNumber>0x4</ToolsetNumber>
+		<ToolsetName>ARM-ADS</ToolsetName>
+		<TargetOption>
+			<CLKADS>64000000</CLKADS>
+			<OPTTT>
+				<gFlags>1</gFlags>
+				<BeepAtEnd>1</BeepAtEnd>
+				<RunSim>0</RunSim>
+				<RunTarget>1</RunTarget>
+			</OPTTT>
+			<OPTHX>
+				<HexSelection>1</HexSelection>
+				<FlashByte>65535</FlashByte>
+				<HexRangeLowAddress>0</HexRangeLowAddress>
+				<HexRangeHighAddress>0</HexRangeHighAddress>
+				<HexOffset>0</HexOffset>
+			</OPTHX>
+			<OPTLEX>
+				<PageWidth>79</PageWidth>
+				<PageLength>66</PageLength>
+				<TabStop>8</TabStop>
+				<ListingPath />
+			</OPTLEX>
+			<ListingPage>
+				<CreateCListing>1</CreateCListing>
+				<CreateAListing>1</CreateAListing>
+				<CreateLListing>1</CreateLListing>
+				<CreateIListing>0</CreateIListing>
+				<AsmCond>1</AsmCond>
+				<AsmSymb>1</AsmSymb>
+				<AsmXref>0</AsmXref>
+				<CCond>1</CCond>
+				<CCode>0</CCode>
+				<CListInc>0</CListInc>
+				<CSymb>0</CSymb>
+				<LinkerCodeListing>0</LinkerCodeListing>
+			</ListingPage>
+			<OPTXL>
+				<LMap>1</LMap>
+				<LComments>1</LComments>
+				<LGenerateSymbols>1</LGenerateSymbols>
+				<LLibSym>1</LLibSym>
+				<LLines>1</LLines>
+				<LLocSym>1</LLocSym>
+				<LPubSym>1</LPubSym>
+				<LXref>0</LXref>
+				<LExpSel>0</LExpSel>
+			</OPTXL>
+			<OPTFL>
+				<tvExp>0</tvExp>
+				<tvExpOptDlg>0</tvExpOptDlg>
+				<IsCurrentTarget>1</IsCurrentTarget>
+			</OPTFL>
+			<CpuCode>0</CpuCode>
+			<DebugOpt>
+				<uSim>0</uSim>
+				<uTrg>1</uTrg>
+				<sLdApp>1</sLdApp>
+				<sGomain>1</sGomain>
+				<sRbreak>1</sRbreak>
+				<sRwatch>1</sRwatch>
+				<sRmem>1</sRmem>
+				<sRfunc>1</sRfunc>
+				<sRbox>1</sRbox>
+				<tLdApp>1</tLdApp>
+				<tGomain>1</tGomain>
+				<tRbreak>1</tRbreak>
+				<tRwatch>1</tRwatch>
+				<tRmem>1</tRmem>
+				<tRfunc>1</tRfunc>
+				<tRbox>1</tRbox>
+				<sRunDeb>0</sRunDeb>
+				<sLrtime>0</sLrtime>
+				<nTsel>13</nTsel>
+				<sDll />
+				<sDllPa />
+				<sDlgDll />
+				<sDlgPa />
+				<sIfile />
+				<tDll />
+				<tDllPa />
+				<tDlgDll />
+				<tDlgPa />
+				<tIfile />
+				<pMon>STLink\ST-LINKIII-KEIL_SWO.dll</pMon>
+			</DebugOpt>
+			<TargetDriverDllRegistry>
+				<SetRegEntry>
+					<Number>0</Number>
+					<Key>ST-LINKIII-KEIL_SWO</Key>
+					<Name>-U-O142 -O2254 -S0 -C0 -N00("ARM CoreSight SW-DP") -D00(5BA02477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO7 -FD20000000 -FC1000 -FN1 -FF0STM32H7x_2048.FLM -FS08000000 -FL0200000 -FP0($$Device:STM32H747XI$Flash\STM32H7x_2048.FLM)</Name>
+				</SetRegEntry>
+				<SetRegEntry>
+					<Number>0</Number>
+					<Key />
+					<Name>-U-O142 -O2254 -S0 -C0 -N00("ARM CoreSight SW-DP") -D00(5BA02477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO7 -FD20000000 -FC1000 -FN1 -FF0STM32H7x_2048.FLM -FS08000000 -FL0200000 -FP0($$Device:STM32H747XI$Flash\STM32H7x_2048.FLM)</Name>
+				</SetRegEntry>
+			</TargetDriverDllRegistry>
+			<DebugFlag>
+				<trace>0</trace>
+				<periodic>1</periodic>
+				<aLwin>0</aLwin>
+				<aCover>0</aCover>
+				<aSer1>0</aSer1>
+				<aSer2>0</aSer2>
+				<aPa>0</aPa>
+				<viewmode>0</viewmode>
+				<vrSel>0</vrSel>
+				<aSym>0</aSym>
+				<aTbox>0</aTbox>
+				<AscS1>0</AscS1>
+				<AscS2>0</AscS2>
+				<AscS3>0</AscS3>
+				<aSer3>0</aSer3>
+				<eProf>0</eProf>
+				<aLa>0</aLa>
+				<aPa1>0</aPa1>
+				<AscS4>0</AscS4>
+				<aSer4>0</aSer4>
+				<StkLoc>0</StkLoc>
+				<TrcWin>0</TrcWin>
+				<newCpu>0</newCpu>
+				<uProt>0</uProt>
+			</DebugFlag>
+			<LintExecutable />
+			<LintConfigFile />
+		</TargetOption>
+	</Target></ProjectOpt>

bsp/stm32/stm32h747-st-discovery/board/CubeMX_Config/MDK-ARM/stm32h747xx_flash_CM4.sct

+; *************************************************************
+; *** Scatter-Loading Description File generated by uVision ***
+; *************************************************************
+
+LR_IROM1 0x08100000 0x00100000  {    ; load region size_region
+  ER_IROM1 0x08100000 0x00100000  {  ; load address = execution address
+   *.o (RESET, +First)
+   *(InRoot$$Sections)
+   .ANY (+RO)
+  }
+  RW_IRAM1 0x10000000 0x10048000{  ; RW data
+   .ANY (+RW +ZI)
+  }
+}

bsp/stm32/stm32h747-st-discovery/board/CubeMX_Config/MDK-ARM/stm32h747xx_flash_CM7.sct

+; *************************************************************
+; *** Scatter-Loading Description File generated by uVision ***
+; *************************************************************
+
+LR_IROM1 0x08000000 0x00100000  {    ; load region size_region
+  ER_IROM1 0x08000000 0x00100000  {  ; load address = execution address
+   *.o (RESET, +First)
+   *(InRoot$$Sections)
+   .ANY (+RO)
+  }
+  RW_IRAM1 0x20000000 0x20020000{  ; RW data
+   .ANY (+RW +ZI)
+  }
+}

bsp/stm32/stm32h747-st-discovery/board/CubeMX_Config/MDK-ARM/stm32h747xx_sram1_CM7.sct

+; *************************************************************
+; *** Scatter-Loading Description File generated by uVision ***
+; *************************************************************
+
+LR_IROM1 0x24000000 0x00040000  {    ; load region size_region
+  ER_IROM1 0x24000000 0x00040000  {  ; load address = execution address
+   *.o (RESET, +First)
+   *(InRoot$$Sections)
+   .ANY (+RO)
+  }
+  RW_IRAM1 0x24040000 0x24080000{  ; RW data
+   .ANY (+RW +ZI)
+  }
+}

bsp/stm32/stm32h747-st-discovery/board/CubeMX_Config/MDK-ARM/stm32h747xx_sram2_CM4.sct

+; *************************************************************
+; *** Scatter-Loading Description File generated by uVision ***
+; *************************************************************
+
+LR_IROM1 0x10000000 0x00020000  {    ; load region size_region
+  ER_IROM1 0x10000000 0x00020000  {  ; load address = execution address
+   *.o (RESET, +First)
+   *(InRoot$$Sections)
+   .ANY (+RO)
+  }
+  RW_IRAM1 0x10020000 0x10048000{  ; RW data
+   .ANY (+RW +ZI)
+  }
+}

bsp/stm32/stm32h747-st-discovery/board/Kconfig

+menu "Hardware Drivers Config"
+
+config SOC_STM32H747XI
+    bool
+    select SOC_SERIES_STM32H7
+    select RT_USING_COMPONENTS_INIT
+    select RT_USING_USER_MAIN
+    default y
+
+menu "Onboard Peripheral Drivers"
+
+endmenu
+
+menu "On-chip Peripheral Drivers"
+
+    config BSP_USING_GPIO
+        bool "Enable GPIO"
+        select RT_USING_PIN
+        default y
+
+    menuconfig BSP_USING_UART
+        bool "Enable UART"
+        default y
+        select RT_USING_SERIAL
+        if BSP_USING_UART
+            config BSP_USING_UART1
+                bool "Enable UART1"
+                default y
+
+        endif
+
+    source "../libraries/HAL_Drivers/Kconfig"
+    
+endmenu
+
+menu "Board extended module Drivers"
+
+endmenu
+ 
+endmenu

bsp/stm32/stm32h747-st-discovery/board/SConscript

+import rtconfig
+from building import *
+
+Import('SDK_LIB')
+
+cwd = GetCurrentDir()
+
+# add the general drivers.
+src = Glob('board.c')
+src += Glob('CubeMX_Config/CM7/Src/stm32h7xx_hal_msp.c')
+
+path = [cwd]
+path += [cwd + '/CubeMX_Config/CM7/Inc']
+
+startup_path_prefix = SDK_LIB
+
+if rtconfig.CROSS_TOOL == 'gcc':
+    src += [startup_path_prefix + '/STM32H7xx_HAL/CMSIS/Device/ST/STM32H7xx/Source/Templates/gcc/startup_stm32h747xx.s']
+elif rtconfig.CROSS_TOOL == 'keil':
+    src += [startup_path_prefix + '/STM32H7xx_HAL/CMSIS/Device/ST/STM32H7xx/Source/Templates/arm/startup_stm32h747xx.s']
+elif rtconfig.CROSS_TOOL == 'iar':
+    src += [startup_path_prefix + '/STM32H7xx_HAL/CMSIS/Device/ST/STM32H7xx/Source/Templates/iar/startup_stm32h747xx.s']
+
+# STM32H743xx || STM32H750xx || STM32F753xx
+# You can select chips from the list above
+CPPDEFINES = ['STM32H747xx', 'CORE_CM7']
+group = DefineGroup('Drivers', src, depend = [''], CPPPATH = path, CPPDEFINES = CPPDEFINES)
+
+Return('group')

bsp/stm32/stm32h747-st-discovery/board/board.c

+/*
+ * Copyright (c) 2006-2018, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-11-06     SummerGift   first version
+ */
+
+#include "board.h"
+
+/**
+  * @brief  System Clock Configuration
+  *         The system Clock is configured as follow :
+  *            System Clock source            = PLL (HSE)
+  *            SYSCLK(Hz)                     = 400000000 (Cortex-M7 CPU Clock)
+  *            HCLK(Hz)                       = 200000000 (Cortex-M4 CPU, Bus matrix Clocks)
+  *            AHB Prescaler                  = 2
+  *            D1 APB3 Prescaler              = 2 (APB3 Clock  100MHz)
+  *            D2 APB1 Prescaler              = 2 (APB1 Clock  100MHz)
+  *            D2 APB2 Prescaler              = 2 (APB2 Clock  100MHz)
+  *            D3 APB4 Prescaler              = 2 (APB4 Clock  100MHz)
+  *            HSE Frequency(Hz)              = 25000000
+  *            PLL_M                          = 5
+  *            PLL_N                          = 160
+  *            PLL_P                          = 2
+  *            PLL_Q                          = 4
+  *            PLL_R                          = 2
+  *            VDD(V)                         = 3.3
+  *            Flash Latency(WS)              = 4
+  * @param  None
+  * @retval None
+  */
+void SystemClock_Config(void)
+{
+  RCC_ClkInitTypeDef RCC_ClkInitStruct;
+  RCC_OscInitTypeDef RCC_OscInitStruct;
+  HAL_StatusTypeDef ret = HAL_OK;
+
+  /*!< Supply configuration update enable */
+  HAL_PWREx_ConfigSupply(PWR_DIRECT_SMPS_SUPPLY);
+
+  /* The voltage scaling allows optimizing the power consumption when the device is
+     clocked below the maximum system frequency, to update the voltage scaling value
+     regarding system frequency refer to product datasheet.  */
+  __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
+
+  while(!__HAL_PWR_GET_FLAG(PWR_FLAG_VOSRDY)) {}
+
+  /* Enable HSE Oscillator and activate PLL with HSE as source */
+  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
+  RCC_OscInitStruct.HSEState = RCC_HSE_ON;
+  RCC_OscInitStruct.HSIState = RCC_HSI_OFF;
+  RCC_OscInitStruct.CSIState = RCC_CSI_OFF;
+  RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+  RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
+
+  RCC_OscInitStruct.PLL.PLLM = 5;
+  RCC_OscInitStruct.PLL.PLLN = 160;
+  RCC_OscInitStruct.PLL.PLLFRACN = 0;
+  RCC_OscInitStruct.PLL.PLLP = 2;
+  RCC_OscInitStruct.PLL.PLLR = 2;
+  RCC_OscInitStruct.PLL.PLLQ = 4;
+
+  RCC_OscInitStruct.PLL.PLLVCOSEL = RCC_PLL1VCOWIDE;
+  RCC_OscInitStruct.PLL.PLLRGE = RCC_PLL1VCIRANGE_2;
+  ret = HAL_RCC_OscConfig(&RCC_OscInitStruct);
+  if(ret != HAL_OK)
+  {
+    Error_Handler();
+  }
+
+/* Select PLL as system clock source and configure  bus clocks dividers */
+  RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_D1PCLK1 | RCC_CLOCKTYPE_PCLK1 | \
+                                 RCC_CLOCKTYPE_PCLK2  | RCC_CLOCKTYPE_D3PCLK1);
+
+  RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
+  RCC_ClkInitStruct.SYSCLKDivider = RCC_SYSCLK_DIV1;
+  RCC_ClkInitStruct.AHBCLKDivider = RCC_HCLK_DIV2;
+  RCC_ClkInitStruct.APB3CLKDivider = RCC_APB3_DIV2;
+  RCC_ClkInitStruct.APB1CLKDivider = RCC_APB1_DIV2;
+  RCC_ClkInitStruct.APB2CLKDivider = RCC_APB2_DIV2;
+  RCC_ClkInitStruct.APB4CLKDivider = RCC_APB4_DIV2;
+  ret = HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4);
+  if(ret != HAL_OK)
+  {
+    Error_Handler();
+  }
+}

bsp/stm32/stm32h747-st-discovery/board/board.h

+/*
+ * Copyright (c) 2006-2018, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-11-5      SummerGift   first version
+ */
+
+#ifndef __BOARD_H__
+#define __BOARD_H__
+
+#include <rtthread.h>
+#include <stm32h7xx.h>
+#include "drv_common.h"
+#include "drv_gpio.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define STM32_FLASH_START_ADRESS     ((uint32_t)0x8000000)
+#define STM32_FLASH_SIZE             (2048 * 1024)
+#define STM32_FLASH_END_ADDRESS      ((uint32_t)(STM32_FLASH_START_ADRESS + STM32_FLASH_SIZE))
+
+#define STM32_SRAM_SIZE              (128)
+#define STM32_SRAM_END               (0x20000000 + STM32_SRAM_SIZE * 1024)
+
+#if defined(__CC_ARM) || defined(__CLANG_ARM)
+extern int Image$$RW_IRAM1$$ZI$$Limit;
+#define HEAP_BEGIN      (&Image$$RW_IRAM1$$ZI$$Limit)
+#elif __ICCARM__
+#pragma section="CSTACK"
+#define HEAP_BEGIN      (__segment_end("CSTACK"))
+#else
+extern int __bss_end;
+#define HEAP_BEGIN      (&__bss_end)
+#endif
+
+#define HEAP_END        STM32_SRAM_END
+
+void SystemClock_Config(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

bsp/stm32/stm32h747-st-discovery/board/linker_scripts/link.icf

+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x08000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__ = 0x08000000;
+define symbol __ICFEDIT_region_ROM_end__   = 0x08100000;
+define symbol __ICFEDIT_region_RAM_start__ = 0x20000000;
+define symbol __ICFEDIT_region_RAM_end__   = 0x20020000;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__ = 0x800;
+define symbol __ICFEDIT_size_heap__   = 0x400;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region      = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region      = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+
+place in ROM_region   { readonly };
+place in RAM_region   { readwrite, last block CSTACK};

bsp/stm32/stm32h747-st-discovery/board/linker_scripts/link.sct

+; *************************************************************
+; *** Scatter-Loading Description File generated by uVision ***
+; *************************************************************
+
+LR_IROM1 0x08000000 0x00100000  {    ; load region size_region
+  ER_IROM1 0x08000000 0x00100000  {  ; load address = execution address
+   *.o (RESET, +First)
+   *(InRoot$$Sections)
+   .ANY (+RO)
+  }
+  RW_IRAM1 0x20000000 0x20020000{  ; RW data
+   .ANY (+RW +ZI)
+  }
+}
\ No newline at end of file