stm32u5xx_ll_opamp.c

/**
  ******************************************************************************
  * @file    stm32u5xx_ll_opamp.c
  * @author  MCD Application Team
  * @brief   OPAMP LL module driver
  ******************************************************************************
  * @attention
  *
  * Copyright (c) 2021 STMicroelectronics.
  * All rights reserved.
  *
  * This software is licensed under terms that can be found in the LICENSE file
  * in the root directory of this software component.
  * If no LICENSE file comes with this software, it is provided AS-IS.
  *
  ******************************************************************************
  */
#if defined(USE_FULL_LL_DRIVER)

/* Includes ------------------------------------------------------------------*/
#include "stm32u5xx_ll_opamp.h"

#ifdef  USE_FULL_ASSERT
#include "stm32_assert.h"
#else
#define assert_param(expr) ((void)0U)
#endif /* USE_FULL_ASSERT */

/** @addtogroup STM32U5xx_LL_Driver
  * @{
  */

#if defined (OPAMP1) || defined (OPAMP2)

/** @addtogroup OPAMP_LL OPAMP
  * @{
  */

/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/* Private macros ------------------------------------------------------------*/

/** @addtogroup OPAMP_LL_Private_Macros
  * @{
  */

/* Check of parameters for configuration of OPAMP hierarchical scope:         */
/* OPAMP instance.                                                            */

#define IS_LL_OPAMP_POWER_MODE(__POWER_MODE__)    (((__POWER_MODE__) == LL_OPAMP_POWERMODE_NORMALPOWER_NORMALSPEED)  ||\
                                                   ((__POWER_MODE__) == LL_OPAMP_POWERMODE_NORMALPOWER_HIGHSPEED)    ||\
                                                   ((__POWER_MODE__) == LL_OPAMP_POWERMODE_LOWPOWER_NORMALSPEED)||\
                                                   ((__POWER_MODE__) == LL_OPAMP_POWERMODE_LOWPOWER_HIGHSPEED))



#define IS_LL_OPAMP_FUNCTIONAL_MODE(__FUNCTIONAL_MODE__)     (((__FUNCTIONAL_MODE__) == LL_OPAMP_MODE_STANDALONE) ||\
                                                              ((__FUNCTIONAL_MODE__) == LL_OPAMP_MODE_FOLLOWER)   ||\
                                                              ((__FUNCTIONAL_MODE__) == LL_OPAMP_MODE_PGA))

/* Note: Comparator non-inverting inputs parameters are the same on all       */
/*       OPAMP instances.                                                     */
/*       However, comparator instance kept as macro parameter for             */
/*       compatibility with other STM32 families.                             */
#define IS_LL_OPAMP_INPUT_NONINVERTING(__OPAMPX__, __INPUT_NONINVERTING__)     \
  (   ((__INPUT_NONINVERTING__) == LL_OPAMP_INPUT_NONINVERT_IO0)               \
      || ((__INPUT_NONINVERTING__) == LL_OPAMP_INPUT_NONINV_DAC1_CH1)             \
  )

/* Note: Comparator non-inverting inputs parameters are the same on all       */
/*       OPAMP instances.                                                     */
/*       However, comparator instance kept as macro parameter for             */
/*       compatibility with other STM32 families.                             */
#define IS_LL_OPAMP_INPUT_INVERTING(__OPAMPX__, __INPUT_INVERTING__)           \
  (   ((__INPUT_INVERTING__) == LL_OPAMP_INPUT_INVERT_IO0)                     \
      || ((__INPUT_INVERTING__) == LL_OPAMP_INPUT_INVERT_IO1)                     \
      || ((__INPUT_INVERTING__) == LL_OPAMP_INPUT_INVERT_CONNECT_NO)              \
  )

/**
  * @}
  */


/* Private function prototypes -----------------------------------------------*/

/* Exported functions --------------------------------------------------------*/
/** @addtogroup OPAMP_LL_Exported_Functions
  * @{
  */

/** @addtogroup OPAMP_LL_EF_Init
  * @{
  */

/**
  * @brief  De-initialize registers of the selected OPAMP instance
  *         to their default reset values.
  * @param  OPAMPx OPAMP instance
  * @retval An ErrorStatus enumeration value:
  *          - SUCCESS: OPAMP registers are de-initialized
  *          - ERROR: OPAMP registers are not de-initialized
  */
ErrorStatus LL_OPAMP_DeInit(OPAMP_TypeDef *OPAMPx)
{
  ErrorStatus status = SUCCESS;

  /* Check the parameters */
  assert_param(IS_OPAMP_ALL_INSTANCE(OPAMPx));

  LL_OPAMP_WriteReg(OPAMPx, CSR, 0x00000000U);

  return status;
}

/**
  * @brief  Initialize some features of OPAMP instance.
  * @note   This function reset bit of calibration mode to ensure
  *         to be in functional mode, in order to have OPAMP parameters
  *         (inputs selection, ...) set with the corresponding OPAMP mode
  *         to be effective.
  * @note   This function configures features of the selected OPAMP instance.
  *         Some features are also available at scope OPAMP common instance
  *         (common to several OPAMP instances).
  * @param  OPAMPx OPAMP instance
  * @param  OPAMP_InitStruct Pointer to a @ref LL_OPAMP_InitTypeDef structure
  * @retval An ErrorStatus enumeration value:
  *          - SUCCESS: OPAMP registers are initialized
  *          - ERROR: OPAMP registers are not initialized
  */
ErrorStatus LL_OPAMP_Init(OPAMP_TypeDef *OPAMPx, LL_OPAMP_InitTypeDef *OPAMP_InitStruct)
{
  /* Check the parameters */
  assert_param(IS_OPAMP_ALL_INSTANCE(OPAMPx));
  assert_param(IS_LL_OPAMP_POWER_MODE(OPAMP_InitStruct->PowerMode));
  assert_param(IS_LL_OPAMP_FUNCTIONAL_MODE(OPAMP_InitStruct->FunctionalMode));
  assert_param(IS_LL_OPAMP_INPUT_NONINVERTING(OPAMPx, OPAMP_InitStruct->InputNonInverting));

  /* Note: OPAMP inverting input can be used with OPAMP in mode standalone    */
  /*       or PGA with external capacitors for filtering circuit.             */
  /*       Otherwise (OPAMP in mode follower), OPAMP inverting input is       */
  /*       not used (not connected to GPIO pin).                              */
  if (OPAMP_InitStruct->FunctionalMode != LL_OPAMP_MODE_FOLLOWER)
  {
    assert_param(IS_LL_OPAMP_INPUT_INVERTING(OPAMPx, OPAMP_InitStruct->InputInverting));
  }

  /* Configuration of OPAMP instance :                                        */
  /*  - PowerMode                                                             */
  /*  - Functional mode                                                       */
  /*  - Input non-inverting                                                   */
  /*  - Input inverting                                                       */
  /* Note: Bit OPAMP_CSR_CALON reset to ensure to be in functional mode.      */
  if (OPAMP_InitStruct->FunctionalMode != LL_OPAMP_MODE_FOLLOWER)
  {
    MODIFY_REG(OPAMPx->CSR,
               OPAMP_CSR_OPALPM
               | OPAMP_CSR_OPAMODE
               | OPAMP_CSR_CALON
               | OPAMP_CSR_VM_SEL
               | OPAMP_CSR_VP_SEL
               | OPAMP_CSR_HSM
               ,
               OPAMP_InitStruct->PowerMode
               | OPAMP_InitStruct->FunctionalMode
               | OPAMP_InitStruct->InputNonInverting
               | OPAMP_InitStruct->InputInverting
              );
  }
  else
  {
    MODIFY_REG(OPAMPx->CSR,
               OPAMP_CSR_OPALPM
               | OPAMP_CSR_OPAMODE
               | OPAMP_CSR_CALON
               | OPAMP_CSR_VM_SEL
               | OPAMP_CSR_VP_SEL
               | OPAMP_CSR_HSM
               ,
               OPAMP_InitStruct->PowerMode
               | LL_OPAMP_MODE_FOLLOWER
               | OPAMP_InitStruct->InputNonInverting
               | LL_OPAMP_INPUT_INVERT_CONNECT_NO
              );
  }

  /* Set the power supply range to high for performance purpose    */
  /* The OPAMP_CSR_OPARANGE is common configuration for all OPAMPs */
  /* bit OPAMP_CSR_OPARANGE applies for both OPAMPs                */
  MODIFY_REG(OPAMP1->CSR, OPAMP_CSR_OPARANGE, OPAMP_CSR_OPARANGE);

  return SUCCESS;
}

/**
  * @brief Set each @ref LL_OPAMP_InitTypeDef field to default value.
  * @param OPAMP_InitStruct pointer to a @ref LL_OPAMP_InitTypeDef structure
  *                         whose fields will be set to default values.
  * @retval None
  */
void LL_OPAMP_StructInit(LL_OPAMP_InitTypeDef *OPAMP_InitStruct)
{
  /* Set OPAMP_InitStruct fields to default values */
  OPAMP_InitStruct->PowerMode         = LL_OPAMP_POWERMODE_NORMALPOWER_NORMALSPEED;
  OPAMP_InitStruct->FunctionalMode    = LL_OPAMP_MODE_FOLLOWER;
  OPAMP_InitStruct->InputNonInverting = LL_OPAMP_INPUT_NONINVERT_IO0;
  /* Note: Parameter discarded if OPAMP in functional mode follower,          */
  /*       set anyway to its default value.                                   */
  OPAMP_InitStruct->InputInverting    = LL_OPAMP_INPUT_INVERT_CONNECT_NO;
}

/**
  * @}
  */

/**
  * @}
  */

/**
  * @}
  */

#endif /* OPAMP1 || OPAMP2 */

/**
  * @}
  */

#endif /* USE_FULL_LL_DRIVER */