- 14 6月, 2023 13 次提交
-
-
由 Peter Harper 提交于
Marking address as static was not applied to all code paths. Signed-off-by: NDamien George <damien@micropython.org>
-
由 Peter Harper 提交于
Cancel any existing poll alarm before add a new one. Signed-off-by: NDamien George <damien@micropython.org>
-
由 Peter Harper 提交于
Using BTstack with CYW43 for Pico W. Signed-off-by: NDamien George <damien@micropython.org>
-
由 Peter Harper 提交于
Signed-off-by: NDamien George <damien@micropython.org>
-
由 Damien George 提交于
Signed-off-by: NDamien George <damien@micropython.org>
-
由 Damien George 提交于
Signed-off-by: NDamien George <damien@micropython.org>
-
由 Damien George 提交于
Includes a fix for combined BT+WiFi when using SPI transport. Signed-off-by: NDamien George <damien@micropython.org>
-
由 Jared Hancock 提交于
PEP-498 allows for conversion specifiers like !r and !s to convert the expression declared in braces to be passed through repr() and str() respectively. This updates the logic that detects the end of the expression to also stop when it sees "![rs]" that is either at the end of the f-string or before the ":" indicating the start of the format specifier. The "![rs]" is now retained in the format string, whereas previously it stayed on the end of the expression leading to a syntax error. Previously: `f"{x!y:z}"` --> `"{:z}".format(x!y)` Now: `f"{x!y:z}"` --> `"{!y:z}".format(x)` Note that "!a" is not supported by `str.format` as MicroPython has no `ascii()`, but now this will raise the correct error. Updated cpydiff and added tests. Signed-off-by: NJim Mussared <jim.mussared@gmail.com>
-
由 Damien George 提交于
So that the delegation functions don't need to be put somewhere global, like in mpconfigport.h. That would otherwise make it hard for extension modules to use delegation. Signed-off-by: NDamien George <damien@micropython.org>
-
由 Damien George 提交于
Signed-off-by: NDamien George <damien@micropython.org>
-
由 David Lechner 提交于
Starting with 2757acf6, the `top` variable in `nlr_jump()` in `nlraarch64.c` was assigned to register `x19` by the compiler. However, the assembly code writes over that register with ldp x19, x20, [%0, #32] since `%0` is now `x19`. This causes the next line ldp lr, x9, [%0, #16] to load the wrong values. To fix the issue, we move the value of the `top` variable from an unknown register to a known register at the beginning of the asm code then only use known/hard-coded registers after that. Fixes issue #11754. Signed-off-by: NDavid Lechner <david@pybricks.com>
-
由 David Lechner 提交于
This fixes a `#endif` comment to exactly match the `#if`. Signed-off-by: NDavid Lechner <david@pybricks.com>
-
由 Wilko Nienhaus 提交于
This change enables the ULP (FSM) for all ESP32 variants rather than requiring it to be enabled for each board specifically. It also ensures the correct header file is included for each variant. Lastly, it updates the IDF version we're builing against to v4.4.2, as that version contains important fixes to make the ULP actually work on S2/S3 chips. See: https://github.com/espressif/esp-idf/commit/a0e3d48Signed-off-by: NWilko Nienhaus <wilko.nienhaus@gmail.com>
-
- 13 6月, 2023 2 次提交
-
-
In 5fe2a3f1 the ESP32 port underwent a change to how `MICROPY_PORT_DIR` is defined. This commit normalizes the `rp2` port to use the same underlying variable mechanism (`CMAKE_CURRENT_LIST_DIR`). Signed-off-by: NBrian 'redbeard' Harrington <redbeard@dead-city.org>
-
This migrates the CMake variable `MICROPY_PORT_DIR` from the ESP-IDF defined project to the component. Previously used instances of the variable within the project definition have been migrated to `CMAKE_CURRENT_LIST_DIR`. Within the component (the `main` subdirectory in the ESP32 port) we define `MICROPY_PORT_DIR` using `CMAKE_CURRENT_LIST_DIR` and subsequently use the `MICROPY_PORT_DIR` value in all locations where `PROJECT` had previously been used. Context: In commit 9b908821, initial support was added for building with the newly introduced CMake support provided by the ESP-IDF. Specifically, the commit message states: > This commit adds support for building the esp32 port with CMake, and in particular, it builds MicroPython as a component within the ESP-IDF. Using CMake and the ESP-IDF build infrastructure makes it much easier to maintain the port, especially with the various new ESP32 MCUs and their required toolchains. `PROJECT_DIR` is a variable populated by the ESP-IDF specifically and is not stable when used with "[Pure CMake components][1]" as documented in the ESP-IDF. It is intended to be used in the scope of the parent of the current file (the "project") as opposed to the current file ("the component"). Crossing into the parent scope like this works solely when the "project" is MicroPython, but not when used as a component by other ESP-IDF projects. Analyzing this file, the intention is to reference the "Project" which in the example is the parent directory. Within the [CMake variables][2] documentation, there is one specifically defined for referencing the directory for the CMake listfile currently being processed: [`CMAKE_CURRENT_LIST_DIR`][3]. After making the change from `PROJECT_DIR` to `CMAKE_CURRENT_LIST_DIR`, the reach into the parent scope defined by the ESP-IDF and the resulting CMake interface violation is removed. Similar to the component definition, the project `CMakeLists.txt` uses the variable `CMAKE_SOURCE_DIR` which CMake defines as "The path to the top level of the source tree." This commit changes the variable to `CMAKE_CURRENT_LIST_DIR` for the reasons cited above. [1]: https://docs.espressif.com/projects/esp-idf/en/latest/esp32s2/api-guides/build-system.html#writing-pure-cmake-components [2]: https://cmake.org/cmake/help/latest/manual/cmake-variables.7.html [3]: https://cmake.org/cmake/help/latest/variable/CMAKE_CURRENT_LIST_DIR.htmlSigned-off-by: NBrian 'redbeard' Harrington <redbeard@dead-city.org>
-
- 10 6月, 2023 1 次提交
-
-
由 Glenn Moloney 提交于
Rename "buffer" option to "rxbuf" which accords with docs and esp8266. Signed-off-by: NGlenn Moloney <glenn.moloney@gmail.com>
-
- 09 6月, 2023 1 次提交
-
-
由 Jim Mussared 提交于
This was missed in the pyboard refactor and is preventing `cp -r` from working. Signed-off-by: NJim Mussared <jim.mussared@gmail.com>
-
- 08 6月, 2023 23 次提交
-
-
由 Damien George 提交于
Following how mkrules.cmake works. This makes it easy for a port to enable frozen code, by defining FROZEN_MANIFEST in its Makefile. Signed-off-by: NDamien George <damien@micropython.org>
-
由 Damien George 提交于
Signed-off-by: NDamien George <damien@micropython.org>
-
由 Damien George 提交于
Signed-off-by: NDamien George <damien@micropython.org>
-
由 Damien George 提交于
The automatic code size build and GitHub comment is a really useful feature. This commit adds a few more builds to it (mimxrt and samd). Signed-off-by: NDamien George <damien@micropython.org>
-
由 Jim Mussared 提交于
This is a MicroPython-specific module that existed to support the old version of uasyncio. It's undocumented and not enabled on all ports and takes up code size unnecessarily. Signed-off-by: NJim Mussared <jim.mussared@gmail.com>
-
由 Jim Mussared 提交于
- Update guide for extending built-in modules. - Remove any last trace of umodule in other docs. This work was funded through GitHub Sponsors. Signed-off-by: NJim Mussared <jim.mussared@gmail.com>
-
由 Jim Mussared 提交于
Applies to drivers/examples/extmod/port-modules/tools. This work was funded through GitHub Sponsors. Signed-off-by: NJim Mussared <jim.mussared@gmail.com>
-
由 Jim Mussared 提交于
Make tests run in an isolated environment (i.e. `import io` would otherwise get the `tests/io` directory). This work was funded through GitHub Sponsors. Signed-off-by: NJim Mussared <jim.mussared@gmail.com>
-
由 Jim Mussared 提交于
Make tests run in an isolated environment (i.e. `import io` would otherwise get the `tests/io` directory). This work was funded through GitHub Sponsors. Signed-off-by: NJim Mussared <jim.mussared@gmail.com>
-
由 Jim Mussared 提交于
Make tests run in an isolated environment (i.e. `import io` would otherwise get the `tests/io` directory). This work was funded through GitHub Sponsors. Signed-off-by: NJim Mussared <jim.mussared@gmail.com>
-
由 Jim Mussared 提交于
This work was funded through GitHub Sponsors. Signed-off-by: NJim Mussared <jim.mussared@gmail.com>
-
由 Jim Mussared 提交于
Previously sys.path could be modified by append/pop or slice assignment. This allows `sys.path = [...]`, which can be simpler in many cases, but also improves CPython compatibility. It also allows sys.path to be set to a tuple which means that you can clear sys.path (e.g. temporarily) with no allocations. This also makes sys.path (and sys.argv for consistency) able to be disabled via mpconfig. The unix port (and upytesthelper) require them, so they explicitly verify that they're enabled. This work was funded through GitHub Sponsors. Signed-off-by: NJim Mussared <jim.mussared@gmail.com>
-
由 Jim Mussared 提交于
Otherwise you can get into the confusing state where e.g. sys.ps1 is enabled in config (via `MICROPY_PY_SYS_PS1_PS2`) but still doesn't actually get enabled. Also verify that the required delegation options are enabled in modsys.c. This work was funded through GitHub Sponsors. Signed-off-by: NJim Mussared <jim.mussared@gmail.com>
-
由 Jim Mussared 提交于
When compiling mpy-cross, there is no `sys` module, and so there will be no entries in the `mp_builtin_module_delegation_table`. MSVC doesn't like this, so instead pretend as if the feature isn't enabled at all. Signed-off-by: NJim Mussared <jim.mussared@gmail.com>
-
由 Jim Mussared 提交于
This replaces the previous QSTR_null entry in the globals dict which could leak out to Python (e.g. via iteration of mod.__dict__) and could lead to crashes. It results in smaller code size at the expense of turning a lookup into a loop, but the list it is looping over likely only contains one or two elements. To allow a module to register its custom attr function it can use the new `MP_REGISTER_MODULE_DELEGATION` macro. This work was funded through GitHub Sponsors. Signed-off-by: NJim Mussared <jim.mussared@gmail.com>
-
由 Jim Mussared 提交于
This work was funded through GitHub Sponsors. Signed-off-by: NJim Mussared <jim.mussared@gmail.com>
-
由 Jim Mussared 提交于
Signed-off-by: NJim Mussared <jim.mussared@gmail.com>
-
由 Jim Mussared 提交于
Signed-off-by: NJim Mussared <jim.mussared@gmail.com>
-
由 Jim Mussared 提交于
Updates any includes, and references from Makefiles/CMake. This essentially reverts what was done long ago in commit 136b5cbd This work was funded through GitHub Sponsors. Signed-off-by: NJim Mussared <jim.mussared@gmail.com>
-
由 Jim Mussared 提交于
This work was funded through GitHub Sponsors. Also updates #includes. Signed-off-by: NJim Mussared <jim.mussared@gmail.com>
-
由 Jim Mussared 提交于
This work was funded through GitHub Sponsors. Signed-off-by: NJim Mussared <jim.mussared@gmail.com>
-
由 Jim Mussared 提交于
This work was funded through GitHub Sponsors. Signed-off-by: NJim Mussared <jim.mussared@gmail.com>
-
由 Jim Mussared 提交于
This work was funded through GitHub Sponsors. Signed-off-by: NJim Mussared <jim.mussared@gmail.com>
-