format sconscript Kconfig files

bsp/Infineon/psoc6-cy8ckit-062-WIFI-BT/board/SConscript

@@ -33,7 +33,7 @@ if rtconfig.PLATFORM in ['gcc']:
 elif rtconfig.PLATFORM in ['armclang']:
     src += [startup_path_prefix +
             '/IFX_PSOC6_HAL/mtb-pdl-cat1/drivers/source/TOOLCHAIN_ARM/cy_syslib_mdk.S']
-            
+
 CPPDEFINES = ['CY8C6247BZI_D54', 'CY_USING_HAL', 'COMPONENT_CAT1A', 'COMPONENT_CAT1', 'COMPONENT_BSP_DESIGN_MODUS']
 group = DefineGroup('Drivers', src, depend=[''], CPPPATH=path, CPPDEFINES=CPPDEFINES)
 

bsp/apm32/apm32f030r8-miniboard/board/Kconfig

@@ -145,7 +145,7 @@ menu "On-chip Peripheral Drivers"
             config BSP_USING_TMR15
                 bool "Enable TMR15"
                 default n
-                
+
             config BSP_USING_TMR16
                 bool "Enable TMR16"
                 default n

bsp/at32/at32f403a-start/board/Kconfig

@@ -26,7 +26,7 @@ menu "On-chip Peripheral Drivers"
 
     config BSP_USING_ON_CHIP_FLASH
         bool "Enable on-chip FLASH"
-        default n 
+        default n
 
     config BSP_USING_USBD
         bool "Enable USB BUS"

bsp/at32/at32f413-start/board/Kconfig

@@ -26,7 +26,7 @@ menu "On-chip Peripheral Drivers"
 
     config BSP_USING_ON_CHIP_FLASH
         bool "Enable on-chip FLASH"
-        default n 
+        default n
 
     config BSP_USING_USBD
         bool "Enable USB BUS"

bsp/at32/at32f415-start/board/Kconfig

@@ -26,7 +26,7 @@ menu "On-chip Peripheral Drivers"
 
     config BSP_USING_ON_CHIP_FLASH
         bool "Enable on-chip FLASH"
-        default n 
+        default n
 
     menuconfig BSP_USING_USBFS
         bool "Enable USB BUS"

bsp/at32/at32f425-start/board/Kconfig

@@ -26,7 +26,7 @@ menu "On-chip Peripheral Drivers"
 
     config BSP_USING_ON_CHIP_FLASH
         bool "Enable on-chip FLASH"
-        default n 
+        default n
 
     menuconfig BSP_USING_USBFS
         bool "Enable USB BUS"

bsp/at32/at32f435-start/board/Kconfig

@@ -30,7 +30,7 @@ menu "On-chip Peripheral Drivers"
 
     config BSP_USING_ON_CHIP_FLASH
         bool "Enable on-chip FLASH"
-        default n 
+        default n
 
     menuconfig BSP_USING_USBFS
         bool "Enable USB BUS"

bsp/at32/libraries/usbd_library/SConscript

@@ -10,7 +10,7 @@ src = Split("""
 
 # The set of source files associated with this SConscript file.
 if GetDepend('RT_USING_USB_DEVICE'):
-	src += ['src/usbd_core.c', 'src/usbd_int.c', 'src/usbd_sdr.c']
+    src += ['src/usbd_core.c', 'src/usbd_int.c', 'src/usbd_sdr.c']
 
 CPPPATH = [cwd + '/inc']
 

bsp/at32/libraries/usbfs_library/SConscript

@@ -15,10 +15,10 @@ if GetDepend('BSP_USING_USBFS'):
     src += ['src/usb_core.c']
 
 if GetDepend('RT_USING_USB_DEVICE'):
-	src += ['src/usbd_core.c', 'src/usbd_int.c', 'src/usbd_sdr.c']
+    src += ['src/usbd_core.c', 'src/usbd_int.c', 'src/usbd_sdr.c']
 
 if GetDepend('RT_USING_USB_HOST'):
-	src += ['src/usbh_core.c', 'src/usbh_int.c', 'src/usbh_ctrl.c']
+    src += ['src/usbh_core.c', 'src/usbh_int.c', 'src/usbh_ctrl.c']
 
 CPPPATH = [cwd + '/inc']
 

bsp/imxrt/imxrt1060-nxp-evk/board/Kconfig

@@ -184,15 +184,15 @@ menu "On-chip Peripheral Drivers"
             config CODE_STORED_ON_SDCARD
                 bool "Enable Code STORED On SDCARD"
                 default n
-                help 
-                    "SD CARD work as boot devive"				
+                help
+                    "SD CARD work as boot devive"
         endif
 
     config BSP_USING_USB
         bool "Enable USB"
         select RT_USING_USB_HOST
         default n
-		
+
         if BSP_USING_USB
         config BSP_USB0_HOST
             bool "Enable USB0"
@@ -200,7 +200,7 @@ menu "On-chip Peripheral Drivers"
 
         config BSP_USB1_HOST
             bool "Enable USB1"
-            default n	
+            default n
         endif
 
     menuconfig BSP_USING_I2C

bsp/imxrt/imxrt1060-nxp-evk/board/SConscript

@@ -17,11 +17,11 @@ if GetDepend(['BSP_USING_TOUCHPAD']):
 
 CPPPATH = [cwd,cwd + '/MCUX_Config',cwd + '/ports']
 
-# CPPDEFINES = ['CPU_MIMXRT1062DVL6A', 'SKIP_SYSCLK_INIT', 'EVK_MCIMXRM', 'FSL_SDK_ENABLE_DRIVER_CACHE_CONTROL=1', 
+# CPPDEFINES = ['CPU_MIMXRT1062DVL6A', 'SKIP_SYSCLK_INIT', 'EVK_MCIMXRM', 'FSL_SDK_ENABLE_DRIVER_CACHE_CONTROL=1',
 #                 'FSL_SDK_DRIVER_QUICK_ACCESS_ENABLE=1','DATA_SECTION_IS_CACHEABLE=1']
 
 
-CPPDEFINES = ['CPU_MIMXRT1062DVL6A', 'SKIP_SYSCLK_INIT', 'EVK_MCIMXRM', 'FSL_SDK_ENABLE_DRIVER_CACHE_CONTROL=1', 
+CPPDEFINES = ['CPU_MIMXRT1062DVL6A', 'SKIP_SYSCLK_INIT', 'EVK_MCIMXRM', 'FSL_SDK_ENABLE_DRIVER_CACHE_CONTROL=1',
                 'FSL_SDK_DRIVER_QUICK_ACCESS_ENABLE=1','DATA_SECTION_IS_CACHEABLE=0', 'XIP_EXTERNAL_FLASH=1', 'XIP_BOOT_HEADER_ENABLE=1']
 
 if rtconfig.PLATFORM in ['armcc', 'armclang']:

bsp/lpc55sxx/lpc55s69_nxp_evk/board/Kconfig

@@ -152,7 +152,7 @@ menu "On-chip Peripheral Drivers"
                     bool "Enable ADC0 Channel8"
                     default n
 
-        
+
                 config BSP_USING_ADC0_CH13
                     bool "Enable ADC0 Channel13"
                     default n

bsp/nuvoton/libraries/ma35/libcpu/arm/cortex-m4/SConscript

@@ -11,4 +11,4 @@ group = []
 # USB driver constrain
 group = DefineGroup('CPU', src, depend = [''], CPPPATH = CPPPATH)
 
-Return('group')
+Return('group')
\ No newline at end of file

bsp/nuvoton/numaker-hmi-ma35d1/preload/SConscript

@@ -10,4 +10,4 @@ src = Glob('*.c') + Glob('*.cpp') + Glob('*.S')
 CPPPATH = [ cwd ]
 
 group = DefineGroup('board', src, depend = [''], CPPPATH = CPPPATH)
-Return('group')
+Return('group')
\ No newline at end of file

bsp/nuvoton/numaker-iot-m467/board/SConscript

@@ -16,4 +16,4 @@ CPPPATH = [cwd, cwd + '/NuPinConfig']
 
 group = DefineGroup('Drivers', src, depend = [''], CPPPATH = CPPPATH)
 
-Return('group')
+Return('group')
\ No newline at end of file

bsp/nuvoton/numaker-iot-ma35d1/preload/SConscript

@@ -10,4 +10,4 @@ src = Glob('*.c') + Glob('*.cpp') + Glob('*.S')
 CPPPATH = [ cwd ]
 
 group = DefineGroup('board', src, depend = [''], CPPPATH = CPPPATH)
-Return('group')
+Return('group')
\ No newline at end of file

bsp/renesas/ra6m3-ek/board/Kconfig

@@ -54,11 +54,11 @@ menu "Hardware Drivers Config"
             bool "Enable SPI BUS"
             default n
             select RT_USING_SPI
-            if BSP_USING_SPI 
+            if BSP_USING_SPI
                 config BSP_USING_SPI0
                     bool "Enable SPI0 BUS"
                     default n
-        
+
                 config BSP_USING_SPI1
                     bool "Enable SPI1 BUS"
                     default n
@@ -68,7 +68,7 @@ menu "Hardware Drivers Config"
             bool "Enable File System"
             select RT_USING_DFS
             default n
-    
+
             if BSP_USING_FS
                 config BSP_USING_SDCARD_FATFS
                     bool "Enable SDCARD (FATFS)"
@@ -105,7 +105,7 @@ menu "Hardware Drivers Config"
         bool "Enable LVGL for LCD"
         select PKG_USING_LVGL
         default n
-        if BSP_USING_LVGL      
+        if BSP_USING_LVGL
             config BSP_USING_LCD_ILI9431
                 bool "Enable LVGL for LCD_ILI9431"
                 select BSP_USING_SPI_LCD

bsp/renesas/ra6m4-cpk/board/Kconfig

@@ -459,7 +459,7 @@ menu "Hardware Drivers Config"
                 bool "Enable LVGL for LCD"
                 select PKG_USING_LVGL
                 default n
-                if BSP_USING_LVGL      
+                if BSP_USING_LVGL
                     config BSP_USING_LCD_ILI9431
                         bool "Enable LVGL for LCD_ILI9431"
                         select BSP_USING_SPI_LCD

bsp/stm32/stm32f401-weact-blackpill/Kconfig

@@ -14,7 +14,7 @@ config PKGS_DIR
     string
     option env="PKGS_ROOT"
     default "packages"
- 
+
 source "$RTT_DIR/Kconfig"
 source "$PKGS_DIR/Kconfig"
 source "../libraries/Kconfig"

bsp/stm32/stm32f401-weact-blackpill/board/Kconfig

@@ -32,13 +32,13 @@ menu "On-chip Peripheral Drivers"
                 depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA
                 default n
         endif
-        
-    source "../libraries/HAL_Drivers/Kconfig"    
-    
+
+    source "../libraries/HAL_Drivers/Kconfig"
+
 endmenu
 
 menu "Board extended module Drivers"
 
 endmenu
- 
+
 endmenu

bsp/wch/risc-v/ch32v208w-r0/SConstruct

@@ -24,7 +24,7 @@ env = Environment(tools = ['mingw'],
     AS = rtconfig.AS, ASFLAGS = rtconfig.AFLAGS,
     CC = rtconfig.CC, CFLAGS = rtconfig.CFLAGS,
     AR = rtconfig.AR, ARFLAGS = '-rc',
-    CXX = rtconfig.CXX, 
+    CXX = rtconfig.CXX,
     LINK = rtconfig.LINK, LINKFLAGS = rtconfig.LFLAGS)
 env.PrependENVPath('PATH', rtconfig.EXEC_PATH)