* Update config.lua

* Update frp

* Update frp.po

This commit fix sysupgrade failed for bcm27xx.

* feat(rcloneng): an angular web application for rclone
* feat(backup): backup rclone configuration files during system upgrade
* 🐛 luci-app-rclone: rclone service without bash
* 🔇 filter out duplicate log
* 🐛 luci-app-rclone: proxy work around
* 📄 add license header
* rclone: set /etc/rclone/rclone.conf as default config path

ps3netsrv: add ps3netsrv allows you to stream games and ISOs over the network to your CFW PlayStation(R) 3 system

Co-authored-by: Nhyird <1326606797@qq.com>

Fix
Issued an emergency fix for VMess weakness described in https://github.com/v2ray/v2ray-core/issues/2523
This fix can significantly hindrance attack based on the weakness described. Only servers need to be updated to apply this emergency fix, it not expected for well-behaved clients to be influenced. A more permanent solution is underway.

mt76: fix build
ath10k-ct: rollback to 4.19
Revert "iw/iwinfo/mwlwifi: bump version"
Revert "mac80211/5.4: fix build on kernel 4.9"
Revert "mac80211: switch to upstream owl-loader driver"

This reverts commit 9206d58b.

纯净的ubuntu在搭建编译环境时会提示没有安装wget

arch/arm/boot/dts/qcom-ipq4019-cm520-79f.dtb: Warning (reg_format):
"reg" property in /led_spi/led_gpio@0 has invalid length (4 bytes)
(#address-cells == 1, #size-cells == 1)
arch/arm/boot/dts/qcom-ipq4019-cm520-79f.dtb: Warning
(avoid_default_addr_size): Relying on default #size-cells value for
/led_spi/led_gpio@0
arch/arm/boot/dts/qcom-ipq4019-wpj419.dtb: Warning (reg_format):
/soc/spi@78b5000/flash0@0/partitions/partition@0:reg: property has
invalid length (8 bytes) (#size-cells == 1)
Signed-off-by: NAmadeusGhost <amadeus@jmu.edu.cn>

* ramips: add support for Linksys EA7500 v2

* fix build

* fix build

* update build config

缺少fuse-utils模块，导致rclone 无法运行。

* luci-app-unblockmusic: Refresh ipset music list when ifup

* Update 099-unblockmusic

This commit add support for the TP-LINK TL-WDR8500 v1

SOC:	Qualcomm QCA9563 775MHz
RAM:    128MB M14D1G1664A-2.5B DDR2
FLASH:  8MB Winbond 25Q64FVSIG
WLAN1:  QCA9563 2.4GHz 802.11b/g/n 3x3
WLAN2:  QCA9984 5GHz 802.11 n/ac 4x4
Ethernet: 5 x 1000Mbps (1wan, 4lan)

Installation via breed:
Flash into breed-qca956x-uart_rx18_tx22-reset1.bin,
and then edit the environment variables:
  Field: autoboot.command
  Value: boot mem 0x9f020200

From https://www.right.com.cn/forum/thread-328619-1-1.htmlSigned-off-by: NAmadeusGhost <42570690+AmadeusGhost@users.noreply.github.com>

* Tested on RaspberryPi 4B(bcm2711)
Signed-off-by: NMkfsSion <mkfssion@mkfssion.com>