- 07 10月, 2020 2 次提交
-
-
由 CN_SZTL 提交于
* Revert "uboot-rockchip: update NanoPi R2S patches" This reverts commit bda6f6572be630bcf9a1c8a429e40d8a53033af5. This commit breaks the onboard ethernet on some units. Revert it for now. Signed-off-by: NDavid Bauer <mail@david-bauer.net> * rockchip: enable Realtek PHY support The NanoPi R2S features a Realtek Gigabit Ethernet PHY. Enable the Realtek specific PHY driver to correctly configure internal delays. Signed-off-by: NDavid Bauer <mail@david-bauer.net> * uboot-rockchip: fix nanopi-r2s failed to boot on some sd cards Add regulator-boot-on parameters to vcc_sd. Add startup-delay-us parameters to vcc_sdio. This will improve the problem that in some SD cards are failing to boot up. Signed-off-by: NYuan Tao <ty@wevs.org> * rockchip: fix NanoPi R2S GMAC clock name This commit fixes the name for the GMAC clock to gmac_clkin, as this is the name of the clock provided by the rk3328-clk driver. Without this commit, the GMAC will not work in TX direction. Suggested-by: NTobias Waldvogel <tobias.waldvogel@gmail.com> Signed-off-by: NDavid Bauer <mail@david-bauer.net> Co-authored-by: NDavid Bauer <mail@david-bauer.net> Co-authored-by: NYuan Tao <ty@wevs.org>
-
由 AmadeusGhost 提交于
* treewide: remove support for 'DEVICE_COMPAT' variable This commit removes support for the DEVICE_COMPAT variable due to it requires relatively few changes. * Revert "ramips: disable PORT 5 MAC RX/TX flow control by default" The TX/RX flow control is not the cause of the TX timeouts issue Signed-off-by: NChen Minqiang <ptpt52@gmail.com> * ramips: net/mediatek fix logical error fe_empty_txd() should return `tx_ring_size - 1` on ring empty, and return 0 on ring full. Signed-off-by: NChen Minqiang <ptpt52@gmail.com> * ramips: net/mediatek disable eee This disable eee for mt7530 ports, it causes the link down/up issue, which happens when connecting to 100Mbit switch Fixes: FS#1449 Signed-off-by: NChen Minqiang <ptpt52@gmail.com> * ramips: XiaoYu-C5: reuse ralink-eth driver Co-authored-by: NChen Minqiang <ptpt52@gmail.com>
-
- 03 10月, 2020 2 次提交
-
-
由 AmadeusGhost 提交于
[mac80211] ca5ee6e mac80211: Fix potential endless loop 2c14710 mac80211: add more AQL fixes/improvements 91fb3ce mac80211: remove an obsolete patch that is no longer doing anything useful acf1733 mac80211: add preliminary support for enabling 802.11ax in config d717343 mac80211: update encap offload patches to the latest version 673062f mac80211: allow bigger A-MSDU sizes in VHT, even if HT is limited caf7277 mac80211: do not allow bigger VHT MPDUs than the hardware supports cd36c0d mac80211: select the first available channel for 5GHz interfaces 1c6d456 mac80211: fix regression in station connection monitor optimization 4bd7689 mac80211: update sta connection monitor regression fix [target] Sync: at91, ath25, ath79, lantiq, mediatek, mvebu.
-
由 CN_SZTL 提交于
* rockchip: refresh NanoPi R2S patches Update the patches for the NanoPi R2S to the v3 sent (and accepted) upstream. Signed-off-by: NDavid Bauer <mail@david-bauer.net> * rockchip: rk3328: add compatible to NanoPi R2S ethernet PHY This adds the compatible property to the NanoPi R2S ethernet PHY node. Otherwise, the PHY might not be probed, as the PHY ID reads all 0xff when it is still in reset. Signed-off-by: NDavid Bauer <mail@david-bauer.net> * uboot-rockchip: update NanoPi R2S patches Update the patches required for the NanoPi R2S to match the DTS accepted for upstream Linux. The U-Boot patch meanwhile is still pending upstream. Signed-off-by: NDavid Bauer <mail@david-bauer.net> * rockchip: refresh target patches Signed-off-by: NCN_SZTL <cnsztl@project-openwrt.eu.org> Co-authored-by: NCN_SZTL <cnsztl@project-openwrt.eu.org> Co-authored-by: Nwevsty <ty@wevs.org> * rockchip: fix NanoPi R2S PHY ID Fix the PHY ID for the NanoPi R2S PHY compatible to match the used PHY. The ID was wrong as I've accidentally picked the wrong upstream patch. Signed-off-by: NDavid Bauer <mail@david-bauer.net> Co-authored-by: NDavid Bauer <mail@david-bauer.net> Co-authored-by: Nwevsty <ty@wevs.org>
-
- 11 9月, 2020 1 次提交
-
-
由 DoveKi 提交于
-
- 01 9月, 2020 1 次提交
-
-
由 chongshengB 提交于
Manually merged: backport-5.4 011-kbuild-export-SUBARCH.patch layerscape 701-net-0262-net-dsa-ocelot-add-tagger-for-Ocelot-Felix-switches.patch All other modifications made by update_kernel.sh Build-tested: x86/64, lantiq/xrx200, ramips/mt7621 Run-tested: ipq806x (R7800), lantiq/xrx200, x86/64, ramips (RT-AC57U) No dmesg regressions, everything functional Signed-off-by: NJohn Audia <graysky@archlinux.us> [minor commit message adjustments] Signed-off-by: NAdrian Schmutzler <freifunk@adrianschmutzler.de> Co-authored-by: NJohn Audia <graysky@archlinux.us>
-
- 30 8月, 2020 1 次提交
-
-
由 CN_SZTL 提交于
* kernel: bump 5.4 to 5.4.60 Deleted upstream patches: generic: 041-genirq-affinity-Make-affinity-setting-if-activated-o.patch ipq806x: 093-5-v5.8-ipq806x-PCI-qcom-Define-some-PARF-params-needed-for-ipq8064-SoC.patch 093-6-v5.8-ipq806x-PCI-qcom-Add-support-for-tx-term-offset-for-rev-2_1_0.patch Merged manually: ipq806x: 093-4-v5.8-ipq806x-PCI-qcom-Use-bulk-clk-api-and-assert-on-error.patch layerscape: 804-crypto-0016-MLKU-114-1-crypto-caam-reduce-page-0-regs-access-to-.patch Build-tested: ath79/generic, ipq806x, layerscape/armv7, layerscape/armv8_64b Run-tested: ipq806x (R7800) Signed-off-by: NAdrian Schmutzler <freifunk@adrianschmutzler.de> * kernel: Update kernel 4.14 to version 4.14.195 Compile and runtime tested on lantiq/xrx200 and x86/64. Signed-off-by: NHauke Mehrtens <hauke@hauke-m.de> Co-authored-by: NAdrian Schmutzler <freifunk@adrianschmutzler.de> Co-authored-by: NHauke Mehrtens <hauke@hauke-m.de>
-
- 27 8月, 2020 1 次提交
-
-
由 AmadeusGhost 提交于
-
- 26 8月, 2020 1 次提交
-
-
由 AmadeusGhost 提交于
kernel: bump to 4.14.193, 4.19.138, 5.4.59 (#5350) 431fb8c mac80211: add AQL improvements 6bdd4c9 mac80211: add missing backports for building with 4.14 kernels 0106820 mac80211: add missing return code checks in AQL improvements e7f7101 mac80211: rework encapsulation offload support [package] base-files: add function for generating random MAC dnsmasq: abort dhcp_check on interface state boot: sync upstream source code ath10k-ct-firmware/mt76/sch_cake: update to latest git HEAD [script] download: add China Mirror Station [target] Sync: arc770, ath79, bcm63xx, kirkwood, lantiq, layerscape, mediatek, mvebu, octeon, oxnas, pistachio, uml Sync most of the target patches. Run-compiled-on: ipq40xx (4.19 & 5.4), ramips
-
- 18 8月, 2020 1 次提交
-
-
由 AmadeusGhost 提交于
-
- 11 8月, 2020 1 次提交
-
-
由 AmadeusGhost 提交于
* mac80211: refresh patches * mac80211: build compat on kernel 4.14 * mac80211: Update to version 5.8 The removed patches were applied upstream. Signed-off-by: NHauke Mehrtens <hauke@hauke-m.de> Co-authored-by: NChen Minqiang <ptpt52@gmail.com> Co-authored-by: NHauke Mehrtens <hauke@hauke-m.de>
-
- 09 8月, 2020 1 次提交
-
-
由 AmadeusGhost 提交于
* mac80211-5.8: fix build on kernel 4.14 * mac80211: sync upstream commit
-
- 07 8月, 2020 1 次提交
-
-
由 AmadeusGhost 提交于
* mac80211: bump to 5.8-rc2 changelog: dfe0bc8 mac80211: allow ACS restriction with fixed channel 727685c mac80211: rt2x00: define RF5592 in init_eeprom routine cfd2f3b mac80211: create channel list for fixed channel operation d1100c7 mac80211: Update to version 5.7.5-1 ed2015c mac80211: Update to version 5.8-rc2-1 a956c14 mac80211: util: don't warn on missing sband iftype data 8b3e170 hostapd: fix incorrect service name 68bf5a9 mac80211: don't kill wireless daemon on teardown 25e0ae6 mac80211: make cfg80211 testmode support optional (and disabled by default) b7727a8 mac80211: fix AQL issues 3d731fc mac80211: merge performance improvement patches * mt76: update to 2020-07-22 Signed-off-by: NFelix Fietkau <nbd@nbd.name> * mac80211: allow VHT on 2.4GHz Allow VHT rate on 2.4GHz in order to use 256-QAM Signed-off-by: NDENG Qingfang <dengqf6@mail2.sysu.edu.cn> * ath10k: allow VHT on 2.4GHz Signed-off-by: NDENG Qingfang <dengqf6@mail2.sysu.edu.cn> * hostapd: add vendor_vht option hostapd has vendor_vht option to enable VHT (256-QAM) on 2.4GHz Add this option to hostapd.sh so users can enable it via uci Signed-off-by: NDENG Qingfang <dengqf6@mail2.sysu.edu.cn> * ipq807x: Refresh kernel configuration Signed-off-by: NHauke Mehrtens <hauke@hauke-m.de> * ipq807x: Add WCSS bus This is needed to build ath11k. Signed-off-by: NHauke Mehrtens <hauke@hauke-m.de> * mac80211: Add ath11k This adds the Qualcomm 802.11ax wireless chipset support. Signed-off-by: NHauke Mehrtens <hauke@hauke-m.de> Co-authored-by: NFelix Fietkau <nbd@nbd.name> Co-authored-by: NDENG Qingfang <dengqf6@mail2.sysu.edu.cn> Co-authored-by: NHauke Mehrtens <hauke@hauke-m.de>
-
- 05 8月, 2020 1 次提交
-
-
由 DoveKi 提交于
-
- 29 7月, 2020 1 次提交
-
-
由 CN_SZTL 提交于
-
- 26 7月, 2020 1 次提交
-
-
由 AmadeusGhost 提交于
The apcli interface can be bound to either lan or wan, so cancel the default settings.
-
- 20 7月, 2020 3 次提交
-
-
由 coolsnowwolf 提交于
-
由 coolsnowwolf 提交于
-
由 coolsnowwolf 提交于
-
- 19 7月, 2020 1 次提交
-
-
由 AmadeusGhost 提交于
-
- 18 7月, 2020 1 次提交
-
-
由 AmadeusGhost 提交于
* ramips: mt7621.dtsi: add missing pinctrl to ethernet node Add rgmii1_pins (1st GMAC) and mdio_pins to ethernet node pinctrl to ensure they are set to correct mode * ramips: kernel: ralink-eth support mt7621 Signed-off-by: NChen Minqiang <ptpt52@gmail.com> * ramips: some devices use ralink-eth driver Also re-added mt7621 hwnat support for some devices. Signed-off-by: NChen Minqiang <ptpt52@gmail.com> Signed-off-by: NAmadeusGhost <amadeus@openjmu.xyz> * ramips/mt7621: re-added hwnat support Co-authored-by: NLGA1150 <dqfext@gmail.com> Co-authored-by: NChen Minqiang <ptpt52@gmail.com>
-
- 17 7月, 2020 1 次提交
-
-
由 AmadeusGhost 提交于
Fix startup by Mr.chilauhe. Signed-off-by: NAmadeusGhost <42570690+AmadeusGhost@users.noreply.github.com>
-
- 13 7月, 2020 1 次提交
-
-
由 AmadeusGhost 提交于
-
- 10 7月, 2020 2 次提交
-
-
由 coolsnowwolf 提交于
-
由 AmadeusGhost 提交于
-
- 09 7月, 2020 1 次提交
-
-
由 Crazy365 提交于
解决K3无线驱动未被选中编译问题
-
- 08 7月, 2020 5 次提交
-
-
由 coolsnowwolf 提交于
-
由 hyy-666 提交于
-
由 hyy-666 提交于
-
由 hyy-666 提交于
* ramips: add support for Dlink DIR-878 A1 DIR-882 A1 Motorola MR2600 * ramips: add support for Dlink DIR-878 A1 DIR-882 A1 Motorola MR2600 * ramips: add support for Dlink DIR-878 A1 DIR-882 A1 Motorola MR2600 Co-authored-by: Nhyy-666 <hyiy666@gmail.com>
-
由 BoBppy 提交于
R2S的描述是eth1为LAN,eth0为WAN(强迫症xD
-
- 07 7月, 2020 2 次提交
-
-
由 coolsnowwolf 提交于
-
由 coolsnowwolf 提交于
-
- 06 7月, 2020 6 次提交
-
-
由 coolsnowwolf 提交于
-
由 coolsnowwolf 提交于
-
由 AmadeusGhost 提交于
-
由 coolsnowwolf 提交于
-
由 coolsnowwolf 提交于
-
由 coolsnowwolf 提交于
-
- 05 7月, 2020 1 次提交
-
-
由 coolsnowwolf 提交于
-