add check and format 'security' parameter in function  scan_app , and  function connect_ap add bssid option (#5200)

* check and format security

* apcli add bssid option

* updat PKG_RELEASE to 16

编译提示/bin/sh: 1: rsync: not found
增加 rsync 默认依赖

The apcli interface can be bound to either lan or wan, so cancel the
default settings.

* luci-app-mtwifi: add wifi relay support

Source code: Nossiac/mtk-openwrt-feeds
Based on commit 'wireless: wext: remove ndo_do_ioctl fallback'

* luci-app-mtwifi: fix ap-scan failed

* luci-app-mtwifi: show overview when relay is enabled

用来修复编译失败。

* ramips: mt7621.dtsi: add missing pinctrl to ethernet node

Add rgmii1_pins (1st GMAC) and mdio_pins to ethernet node
pinctrl to ensure they are set to correct mode

* ramips: kernel: ralink-eth support mt7621
Signed-off-by: NChen Minqiang <ptpt52@gmail.com>

* ramips: some devices use ralink-eth driver

Also re-added mt7621 hwnat support for some devices.
Signed-off-by: NChen Minqiang <ptpt52@gmail.com>
Signed-off-by: NAmadeusGhost <amadeus@openjmu.xyz>

* ramips/mt7621: re-added hwnat support
Co-authored-by: NLGA1150 <dqfext@gmail.com>
Co-authored-by: NChen Minqiang <ptpt52@gmail.com>

Fix startup by Mr.chilauhe.
Signed-off-by: NAmadeusGhost <42570690+AmadeusGhost@users.noreply.github.com>

修复防火墙端口号。用户如果设置自定义端口，例如1197，则升级固件时，需要uci查询用户设定的自定义端口号，然后打开防火墙端口。

出于以下两个原因，调整快鸟服务对于iface事件的处理策略：
1. 快鸟服务跟随系统启动，ifup事件使快鸟服务重复启动，出现2个快鸟脚本运行实例（原始脚本对于重复运行的判断失效，原因未知）。修改为restart后可保证快鸟服务启动前关闭正在运行的快鸟服务。
2. ifdown事件后不应该立即停止快鸟服务。iface下线后，快鸟脚本无法访问快鸟服务器进行账户注销。未正常注销的账户在外部ip变动后重新上线会触发812错误（12或24小时内无法提速）。因此ifdown事件触发后不停止快鸟服务，而是等iface重新上线（网络恢复正常）后重启服务，以此保证账户注销流程可以正常进行。

* translate `Open Web Interface`

* 打开管理页面自适应 http 和 https

解决K3无线驱动未被选中编译问题

解决target名称变化造成k3screenctrl无法选中编译问题

* ramips: add support for Dlink DIR-878 A1 DIR-882 A1 Motorola MR2600

* ramips: add support for Dlink DIR-878 A1 DIR-882 A1 Motorola MR2600

* ramips: add support for Dlink DIR-878 A1 DIR-882 A1 Motorola MR2600
Co-authored-by: Nhyy-666 <hyiy666@gmail.com>