update ipq40xx target

target/linux/ipq40xx/base-files/lib/upgrade/openmesh.sh

@@ -98,16 +98,9 @@ platform_do_upgrade_openmesh() {
 	printf "rootfs_checksum %s\n" ${rootfs_md5} >> $setenv_script
 
 	# store u-boot env changes
+	mkdir -p /var/lock
 	fw_setenv -s $setenv_script || {
 		echo "failed to update U-Boot environment"
 		return 1
 	}
 }
-
-# create /var/lock for the lock "fw_setenv.lock" of fw_setenv
-# the rest is copied using ipq806x's RAMFS_COPY_BIN and RAMFS_COPY_DATA
-platform_add_ramfs_ubootenv()
-{
-	mkdir -p $RAM_ROOT/var/lock
-}
-append sysupgrade_pre_upgrade platform_add_ramfs_ubootenv

target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts

@@ -183,7 +183,7 @@
 			output-low;
 		};
 	};
-	led_pins: led_pinmux  {
+	led_pins: led_pinmux {
 		mux {
 			pins = "gpio0", "gpio1", "gpio3", "gpio5", "gpio58";
 			drive-strength = <0x8>;

target/linux/ipq40xx/image/Makefile

@@ -91,7 +91,7 @@ define Device/asus_rt-acrh17
 	KERNEL_INITRAMFS := $$(KERNEL) | uImage none
 	KERNEL_INITRAMFS_SUFFIX := -factory.trx
 	IMAGES := sysupgrade.bin
-	DEVICE_PACKAGES := ipq-wifi-rt-acrh17 ath10k-firmware-qca9984-ct
+	DEVICE_PACKAGES := ipq-wifi-rt-acrh17 ath10k-firmware-qca9984
 endef
 TARGET_DEVICES += asus_rt-acrh17
 
@@ -240,7 +240,7 @@ define Device/zyxel_nbg6617
 #	at least as large as the one of the initial firmware image (not the current
 #	one on the device). This only applies to the Web-UI, the bootlaoder ignores
 #	this minimum-size. However, the larger image can be flashed both ways.
-	IMAGE/factory.bin := append-rootfs | pad-rootfs | check-size $$$$(ROOTFS_SIZE) | make-ras
+	IMAGE/factory.bin := append-rootfs | pad-rootfs | pad-to 64k | check-size $$$$(ROOTFS_SIZE) | zyxel-ras-image separate-kernel
 	IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | check-size $$$$(ROOTFS_SIZE) | sysupgrade-tar rootfs=$$$$@ | append-metadata
 	DEVICE_PACKAGES := ipq-wifi-zyxel_nbg6617 uboot-envtools
 endef