ipq40xx: add support for Linksys EA6350v3

package/firmware/ipq-wifi/Makefile

@@ -17,7 +17,7 @@ endef
 # Please send a mail with your device-specific board files upstream.
 # You can find instructions and examples on the linux-wireless wiki:
 # <https://wireless.wiki.kernel.org/en/users/drivers/ath10k/boardfiles>
-ALLWIFIBOARDS:=rt-acrh17 engenius_eap1300
+ALLWIFIBOARDS:=linksys_ea6350v3 rt-acrh17 engenius_eap1300
 ALLWIFIPACKAGES:=$(foreach BOARD,$(ALLWIFIBOARDS),ipq-wifi-$(BOARD))
 
 define Package/ipq-wifi-default
@@ -51,6 +51,7 @@ Don't install it for any other device!
   PREV_BOARD+=ipq-wifi-$(1)
 endef
 
+$(eval $(call generate-ipq-wifi-package,linksys_ea6350v3,board-linksys_ea6350v3.bin,Linksys EA6350v3))
 $(eval $(call generate-ipq-wifi-package,rt-acrh17,board-rt-acrh17.bin,ASUS RT-ACRH17/RT-AC82U/RT-AC42U))
 #$(eval $(call generate-ipq-wifi-package,<devicename>,<filename>,<displayname>))
 $(eval $(call generate-ipq-wifi-package,engenius_eap1300,board-engenius_eap1300.bin,EnGenius EAP1300))

target/linux/ipq40xx/base-files/etc/board.d/02_network

@@ -22,6 +22,7 @@ asus,rt-acrh17)
 	ucidef_set_interface_macaddr "lan" "$lan_mac_addr"
 	ucidef_set_interface_macaddr "wan" "$wan_mac_addr"
 	;;
+linksys,ea6350v3 |\
 avm,fritzbox-4040)
 	ucidef_add_switch "switch0" \
 		"0t@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"

target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata

@@ -124,6 +124,7 @@ case "$FIRMWARE" in
 "ath10k/pre-cal-ahb-a000000.wifi.bin")
 	case "$board" in
 	8dev,jalapeno |\
+	linksys,ea6350v3 |\
 	glinet,gl-b1300 |\
 	qcom,ap-dk01.1-c1)
 		ath10kcal_extract "ART" 4096 12064
@@ -162,6 +163,7 @@ case "$FIRMWARE" in
 "ath10k/pre-cal-ahb-a800000.wifi.bin")
 	case "$board" in
 	8dev,jalapeno |\
+	linksys,ea6350v3 |\
 	glinet,gl-b1300 |\
 	qcom,ap-dk01.1-c1)
 		ath10kcal_extract "ART" 20480 12064

target/linux/ipq40xx/base-files/lib/upgrade/platform.sh

@@ -164,6 +164,7 @@ platform_do_upgrade() {
 		;;
 	asus,rt-ac1300uhp |\
 	asus,rt-acrh17|\
+	linksys,ea6350v3 |\
 	asus,rt-ac58u)
 		local magic=$(get_magic_long "$1")
 		CI_UBIPART="UBI_DEV"
@@ -195,6 +196,10 @@ platform_do_upgrade() {
 
 platform_nand_pre_upgrade() {
 	case "$(board_name)" in
+	linksys,ea6350v3)
+		CI_UBIPART="UBI_DEV"
+		CI_KERNPART="linux"
+		;;
 	meraki,mr33)
 		CI_KERNPART="part.safe"
 		;;

target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-ea6350v3.dts

+/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+	model = "Linksys EA6350v3";
+	compatible = "linksys,ea6350v3", "qcom,ipq4019";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>;
+	};
+
+	aliases {
+		led-boot = &power;
+		led-failsafe = &power;
+		led-running = &power;
+		led-upgrade = &power;
+	};
+
+	soc {
+		mdio@90000 {
+			status = "okay";
+		};
+
+		ess-psgmii@98000 {
+			status = "okay";
+		};
+
+		tcsr@1949000 {
+			compatible = "qcom,tcsr";
+			reg = <0x1949000 0x100>;
+			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
+		};
+
+		tcsr@194b000 {
+			compatible = "qcom,tcsr";
+			reg = <0x194b000 0x100>;
+			qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
+		};
+
+		ess_tcsr@1953000 {
+			compatible = "qcom,tcsr";
+			reg = <0x1953000 0x1000>;
+			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
+		};
+
+		tcsr@1957000 {
+			compatible = "qcom,tcsr";
+			reg = <0x1957000 0x100>;
+			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
+		};
+
+		usb2@60f8800 {
+			status = "okay";
+		};
+
+		serial@78af000 {
+			pinctrl-0 = <&serial_pins>;
+			pinctrl-names = "default";
+			status = "okay";
+		};
+
+		usb3@8af8800 {
+			status = "okay";
+		};
+
+		crypto@8e3a000 {
+			status = "okay";
+		};
+
+		wifi@a000000 {
+			status = "okay";
+			qcom,ath10k-calibration-variant = "linksys-ea6350v3";
+		};
+
+		wifi@a800000 {
+			status = "okay";
+			qcom,ath10k-calibration-variant = "linksys-ea6350v3";
+		};
+
+		watchdog@b017000 {
+			status = "okay";
+		};
+
+		ess-switch@c000000 {
+			status = "okay";
+		};
+
+		edma@c080000 {
+			status = "okay";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&tlmm 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		power: status {
+			label = "rt-ac58u:blue:status";
+			gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&cryptobam {
+	status = "okay";
+};
+
+&blsp_dma {
+	status = "okay";
+};
+
+&tlmm {
+	serial_pins: serial_pinmux {
+		mux {
+			pins = "gpio60", "gpio61";
+			function = "blsp_uart0";
+			bias-disable;
+		};
+	};
+
+	spi_0_pins: spi_0_pinmux {
+		mux {
+			function = "blsp_spi0";
+			pins = "gpio55", "gpio56", "gpio57";
+			drive-strength = <12>;
+			bias-disable;
+		};
+
+		mux_cs {
+			function = "gpio";
+			pins = "gpio54", "gpio59";
+			drive-strength = <2>;
+			bias-disable;
+			output-high;
+		};
+	};
+};
+
+&blsp1_spi1 { /* BLSP1 QUP1 */
+	pinctrl-0 = <&spi_0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>,
+		   <&tlmm 59 GPIO_ACTIVE_HIGH>;
+
+	m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		/*
+		 * U-boot looks for "n25q128a11" node,
+		 * if we don't have it, it will spit out the following warning:
+		 * "ipq: fdt fixup unable to find compatible node".
+		 */
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		linux,modalias = "m25p80", "mx25l1606e", "n25q128a11";
+		spi-max-frequency = <24000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition0@0 {
+				label = "SBL1";
+				reg = <0x00000000 0x00040000>;
+				read-only;
+			};
+			partition1@40000 {
+				label = "MIBIB";
+				reg = <0x00040000 0x00020000>;
+				read-only;
+			};
+			partition2@60000 {
+				label = "QSEE";
+				reg = <0x00060000 0x00060000>;
+				read-only;
+			};
+			partition3@c0000 {
+				label = "CDT";
+				reg = <0x000c0000 0x00010000>;
+				read-only;
+			};
+			partition4@d0000 {
+				label = "APPSBLENV";
+				reg = <0x000d0000 0x00010000>;
+				read-only;
+			};
+			partition5@e0000 {
+				label = "APPSBL"; /* uboot */
+				reg = <0x000e0000 0x00080000>;
+				read-only;
+			};
+			partition6@160000 {
+				label = "ART";
+				reg = <0x00160000 0x00010000>;
+				read-only;
+			};
+			partition7@170000 {
+				label = "u_env";
+				reg = <0x00170000 0x00020000>;
+			};
+			partition8@190000 {
+				label = "s_env";
+				reg = <0x00190000 0x00020000>;
+			};
+			partition9@1b0000 {
+				label = "devinfo";
+				reg = <0x001b0000 0x00010000>;
+			};
+			/* 0x001c0000 - 0x00200000 unused */
+		};
+	};
+	mt29f@1 {
+                status = "okay";
+                #address-cells = <1>;
+                #size-cells = <0>;
+                compatible = "spinand,mt29f", "w25n01gv";
+                reg = <1>;
+                spi-max-frequency = <24000000>;
+                partitions {
+                        compatible = "fixed-partitions";
+                        #address-cells = <1>;
+                        #size-cells = <1>;
+			partition0@0 {
+                                label = "ubi";
+                                reg = <0x00000000 0x08000000>;
+                        };
+
+                };
+        };
+
+};
+
+&usb3_ss_phy {
+	status = "okay";
+};
+
+&usb3_hs_phy {
+	status = "okay";
+};
+
+&usb2_hs_phy {
+	status = "okay";
+};

target/linux/ipq40xx/image/Makefile

@@ -230,6 +230,20 @@ define Device/qcom_ap-dk01.1-c1
 endef
 TARGET_DEVICES += qcom_ap-dk01.1-c1
 
+define Device/linksys_ea6350v3
+	DEVICE_TITLE := Linksys EA6350v3
+	BOARD_NAME := ea6350v3
+	DEVICE_DTS := qcom-ipq4018-ea6350v3
+	DTB_SIZE := 65536
+	BLOCKSIZE := 128k
+	IMAGE_SIZE := 20439364
+	FILESYSTEMS := squashfs
+	IMAGES := sysupgrade.bin
+	$(call Device/FitImage)
+	DEVICE_PACKAGES := ath10k-firmware-qca4019 ipq-wifi-linksys_ea6350v3
+endef
+TARGET_DEVICES += linksys_ea6350v3
+
 define Device/qcom_ap-dk04.1-c1
 	$(call Device/FitImage)
 	$(call Device/UbiFit)

target/linux/ipq40xx/patches-4.14/901-arm-boot-add-dts-files.patch

@@ -10,7 +10,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
 
 --- a/arch/arm/boot/dts/Makefile
 +++ b/arch/arm/boot/dts/Makefile
-@@ -697,7 +697,22 @@ dtb-$(CONFIG_ARCH_QCOM) += \
+@@ -697,7 +697,23 @@ dtb-$(CONFIG_ARCH_QCOM) += \
  	qcom-apq8074-dragonboard.dtb \
  	qcom-apq8084-ifc6540.dtb \
  	qcom-apq8084-mtp.dtb \
@@ -30,6 +30,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
 +	qcom-ipq4028-wpj428.dtb \
 +	qcom-ipq4029-gl-b1300.dtb \
 +	qcom-ipq4029-mr33.dtb \
++	qcom-ipq4018-ea6350v3.dtb \
  	qcom-ipq8064-ap148.dtb \
  	qcom-msm8660-surf.dtb \
  	qcom-msm8960-cdp.dtb \