Skip to content

L
lede

tbblgm119 / lede
与 Fork 源项目一致

从无法访问的项目Fork

通知 7
Star 0
Fork 0
L
lede

体验新版 GitCode，发现更多精彩内容 >>

提交 a75d5c7b 编写于 作者: C coolsnowwolf
浏览文件
操作

add 2.4G wireless support for ASUS RT-ACRH17

上级 6190cbe9
隐藏空白更改
内联 并排
Showing with 208 addition and 138 deletion
target/linux/ipq806x/base-files/etc/board.d/01_leds
浏览文件 @ a75d5c7b
......@@ -35,7 +35,16 @@ nbg6817)
ucidef_set_led_wlan "wlan5g" "WLAN5G" "$board:amber:wifi5g" "phy0tpt"
ucidef_set_led_netdev "wan" "WAN" "$board:white:internet" "eth1"
;;
rt-acrh17 |\
rt-acrh17)
ucidef_set_led_default "status" "STATUS" "${board}:blue:status" "1"
ucidef_set_led_wlan "wlan2g" "WLAN2G" "${board}:blue:wlan2g" "phy0tpt"
ucidef_set_led_wlan "wlan5g" "WLAN5G" "${board}:blue:wlan5g" "phy1tpt"
ucidef_set_led_switch "wan" "WAN(blue)" "${board}:blue:wan" "switch0" "0x20"
ucidef_set_led_switch "lan1" "LAN1" "${board}:blue:lan1" "switch0" "0x02"
ucidef_set_led_switch "lan2" "LAN2" "${board}:blue:lan2" "switch0" "0x04"
ucidef_set_led_switch "lan3" "LAN3" "${board}:blue:lan3" "switch0" "0x08"
ucidef_set_led_switch "lan4" "LAN4" "${board}:blue:lan4" "switch0" "0x10"
;;
rt-ac58u)
ucidef_set_led_wlan "wlan2g" "WLAN2G" "$board:blue:wlan2G" "phy0tpt"
ucidef_set_led_wlan "wlan5g" "WLAN5G" "$board:blue:wlan5G" "phy1tpt"
......
target/linux/ipq806x/base-files/etc/board.d/02_network
浏览文件 @ a75d5c7b
......@@ -53,7 +53,15 @@ nbg6817)
ucidef_set_interface_macaddr "lan" "$hw_mac_addr"
ucidef_set_interface_macaddr "wan" "$(macaddr_add $hw_mac_addr 1)"
;;
rt-acrh17 |\
rt-acrh17)
CI_UBIPART=UBI_DEV
lan_mac_addr=$(mtd_get_mac_binary_ubi Factory 4102)
wan_mac_addr=$(mtd_get_mac_binary_ubi Factory 36870)
ucidef_add_switch "switch0" \
"0t@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
ucidef_set_interface_macaddr "lan" "$lan_mac_addr"
ucidef_set_interface_macaddr "wan" "$wan_mac_addr"
;;
rt-ac58u)
CI_UBIPART=UBI_DEV
wan_mac_addr=$(mtd_get_mac_binary_ubi Factory 20486)
......
target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
浏览文件 @ a75d5c7b
......@@ -76,7 +76,6 @@ case "$FIRMWARE" in
;;
"ath10k/pre-cal-ahb-a800000.wifi.bin")
case "$board" in
rt-acrh17 |\
rt-ac58u)
. /lib/upgrade/nand.sh
......@@ -91,6 +90,11 @@ case "$FIRMWARE" in
"ath10k/pre-cal-pci-0000:01:00.0.bin")
case $board in
rt-acrh17)
CI_UBIPART=UBI_DEV
. /lib/upgrade/nand.sh
ath10kcal_ubi_extract "Factory" 36864 12064
;;
c2600)
ath10kcal_extract "radio" 4096 12064
# ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary default-mac 8) -1)
......
target/linux/ipq806x/base-files/lib/preinit/06_set_iface_mac 0 → 100644
浏览文件 @ a75d5c7b
#
# Copyright (C) 2014-2015 OpenWrt.org
# Copyright (C) 2016 LEDE-Project.org
#
preinit_set_mac_address() {
local mac
. /lib/functions.sh
case $(board_name) in
rt-acrh17)
CI_UBIPART=UBI_DEV
mac=$(mtd_get_mac_binary_ubi Factory 4102)
ifconfig eth0 hw ether $mac 2>/dev/null
esac
}
boot_hook_add preinit_main preinit_set_mac_address
target/linux/ipq806x/base-files/lib/upgrade/platform.sh
浏览文件 @ a75d5c7b
......@@ -34,6 +34,16 @@ EOF
platform_do_upgrade() {
case "$(board_name)" in
rt-acrh17)
CI_UBIPART="UBI_DEV"
CI_KERNPART="linux"
local ubidev=$(nand_find_ubi $CI_UBIPART)
local jffs2=$(nand_find_volume $ubidev jffs2)
local linux2=$(nand_find_volume $ubidev linux2)
[ -n "$jffs2" ] && ubirmvol /dev/$ubidev --name=jffs2
[ -n "$linux2" ] && ubirmvol /dev/$ubidev --name=linux2
nand_do_upgrade "$1"
;;
ap148 |\
ap-dk04.1-c1 |\
d7800 |\
......
target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-rt-acrh17.dts
浏览文件 @ a75d5c7b
......@@ -14,7 +14,7 @@
*
*/
#include "qcom-ipq4019-ap.dk01.1.dtsi"
#include "qcom-ipq4019-ap.dk04.1.dtsi"
#include "qcom-ipq4019-bus.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
......@@ -48,6 +48,91 @@
};
soc {
spi_0: spi@78b5000 {
status = "disabled";
};
pcie0: qcom,pcie@80000 {
compatible = "qcom,msm_pcie";
cell-index = <0>;
qcom,ctrl-amt = <1>;
reg = <0x80000 0x2000>,
<0x99000 0x800>,
<0x40000000 0xf1d>,
<0x40000f20 0xa8>,
<0x40100000 0x1000>,
<0x40200000 0x100000>,
<0x40300000 0xd00000>;
reg-names = "parf", "phy", "dm_core", "elbi",
"conf", "io", "bars";
#address-cells = <0>;
interrupt-parent = <&pcie0>;
interrupts = <0 1 2 3 4 5 6 7 8 9 10 11 12>;
#interrupt-cells = <1>;
interrupt-map-mask = <0xffffffff>;
interrupt-map = <0 &intc 0 141 0
1 &intc 0 142 0
2 &intc 0 143 0
3 &intc 0 144 0
4 &intc 0 145 0
5 &intc 0 146 0
6 &intc 0 147 0
7 &intc 0 148 0
8 &intc 0 149 0
9 &intc 0 150 0
10 &intc 0 151 0
11 &intc 0 152 0 >;
interrupt-names = "int_msi", "int_a", "int_b", "int_c", "int_d",
"int_pls_pme", "int_pme_legacy", "int_pls_err",
"int_aer_legacy", "int_pls_link_up",
"int_pls_link_down", "int_bridge_flush_n","int_wake";
qcom,ep-latency = <10>;
clocks = <&gcc GCC_PCIE_AHB_CLK>,
<&gcc GCC_PCIE_AXI_M_CLK>,
<&gcc GCC_PCIE_AXI_S_CLK>;
clock-names = "pcie_0_cfg_ahb_clk",
"pcie_0_mstr_axi_clk",
"pcie_0_slv_axi_clk";
max-clock-frequency-hz = <0>, <0>, <0>;
resets = <&gcc PCIE_AXI_M_ARES>,
<&gcc PCIE_AXI_S_ARES>,
<&gcc PCIE_PIPE_ARES>,
<&gcc PCIE_AXI_M_VMIDMT_ARES>,
<&gcc PCIE_AXI_S_XPU_ARES>,
<&gcc PCIE_PARF_XPU_ARES>,
<&gcc PCIE_PHY_ARES>,
<&gcc PCIE_AXI_M_STICKY_ARES>,
<&gcc PCIE_PIPE_STICKY_ARES>,
<&gcc PCIE_PWR_ARES>,
<&gcc PCIE_AHB_ARES>,
<&gcc PCIE_PHY_AHB_ARES>;
reset-names = "pcie_rst_axi_m_ares",
"pcie_rst_axi_s_ares",
"pcie_rst_pipe_ares",
"pcie_rst_axi_m_vmidmt_ares",
"pcie_rst_axi_s_xpu_ares",
"pcie_rst_parf_xpu_ares",
"pcie_rst_phy_ares",
"pcie_rst_axi_m_sticky_ares",
"pcie_rst_pipe_sticky_ares",
"pcie_rst_pwr_ares",
"pcie_rst_ahb_res",
"pcie_rst_phy_ahb_ares";
status = "ok";
perst-gpio = <&tlmm 38 0>;
wake-gpio = <&tlmm 50 0>;
clkreq-gpio = <&tlmm 39 0>;
};
tcsr@194b000 {
/* select hostmode */
......@@ -63,7 +148,6 @@
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
......@@ -76,11 +160,6 @@
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
counter@4a1000 {
compatible = "qcom,qca-gcnt";
reg = <0x4a1000 0x4>;
};
mdio@90000 {
status = "okay";
};
......@@ -97,20 +176,20 @@
status = "okay";
};
wifi@a000000 {
status = "okay";
};
wifi@a800000 {
status = "okay";
};
cryptobam: dma@8e04000 {
status = "okay";
wifi0: wifi@a000000 {
status = "ok";
core-id = <0x0>;
qca,msi_addr = <0x0b006040>;
qca,msi_base = <0x40>;
wifi_led_num = <2>; /* Wifi 2G */
wifi_led_source = <0>; /* source id 0 */
qcom,mtd-name = "0:ART";
qcom,cal-offset = <0x1000>;
qcom,cal-len = <12064>;
};
crypto@8e3a000 {
status = "okay";
wifi1: wifi@a800000 {
status = "disabled";
};
};
......@@ -119,13 +198,13 @@
reset {
label = "reset";
gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
gpios = <&tlmm 11 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
......@@ -135,137 +214,78 @@
power: status {
label = "rt-acrh17:blue:status";
gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
gpios = <&tlmm 40 GPIO_ACTIVE_LOW>;
};
wan {
label = "rt-acrh17:blue:wan";
gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
lan1 {
label = "rt-acrh17:blue:lan1";
gpios = <&tlmm 45 GPIO_ACTIVE_LOW>;
};
wlan2G {
label = "rt-acrh17:blue:wlan2G";
gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
lan2 {
label = "rt-acrh17:blue:lan2";
gpios = <&tlmm 43 GPIO_ACTIVE_LOW>;
};
wan5G {
label = "rt-acrh17:blue:wlan5G";
gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
lan3 {
label = "rt-acrh17:blue:lan3";
gpios = <&tlmm 42 GPIO_ACTIVE_LOW>;
};
usb {
label = "rt-acrh17:blue:usb";
gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
lan4 {
label = "rt-acrh17:blue:lan4";
gpios = <&tlmm 49 GPIO_ACTIVE_LOW>;
};
lan {
label = "rt-acrh17:blue:lan";
gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
wan_blue {
label = "rt-acrh17:blue:wan";
gpios = <&tlmm 61 GPIO_ACTIVE_HIGH>;
};
};
};
&spi_0_pins {
pinmux_cs {
function = "gpio";
pins = "gpio54", "gpio59";
};
pinconf_cs {
pins = "gpio54", "gpio59";
drive-strength = <2>;
bias-disable;
output-high;
};
};
wan_red {
label = "rt-acrh17:red:wan";
gpios = <&tlmm 68 GPIO_ACTIVE_HIGH>;
};
wlan2g {
label = "rt-acrh17:blue:wlan2g";
gpios = <&tlmm 52 GPIO_ACTIVE_LOW>;
};
&spi_0 { /* BLSP1 QUP1 */
status = "ok";
cs-gpios = <&tlmm 54 0>,
<&tlmm 59 0>;
wlan5g {
label = "rt-acrh17:blue:wlan5g";
gpios = <&tlmm 54 GPIO_ACTIVE_LOW>;
};
};
};
mx25l25635e@0 {
status = "disabled";
&nand_pins {
pullups {
pins = "gpio53", "gpio58",
"gpio59";
function = "qpic";
bias-pull-up;
};
m25p80@0 {
#address-cells = <1>;
#size-cells = <0>;
/*
* U-boot looks for "n25q128a11" node,
* if we don't have it, it will spit out the following warning:
* "ipq: fdt fixup unable to find compatible node".
*/
compatible = "mx25l1606e", "n25q128a11", "jedec,spi-nor";
reg = <0>;
linux,modalias = "m25p80", "mx25l1606e", "n25q128a11";
spi-max-frequency = <24000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition0@0 {
label = "SBL1";
reg = <0x00000000 0x00040000>;
read-only;
};
partition1@40000 {
label = "MIBIB";
reg = <0x00040000 0x00020000>;
read-only;
};
partition2@60000 {
label = "QSEE";
reg = <0x00060000 0x00060000>;
read-only;
};
partition3@c0000 {
label = "CDT";
reg = <0x000c0000 0x00010000>;
read-only;
};
partition4@d0000 {
label = "DDRPARAMS";
reg = <0x000d0000 0x00010000>;
read-only;
};
partition5@e0000 {
label = "APPSBLENV"; /* uboot env*/
reg = <0x000e0000 0x00010000>;
read-only;
};
partition5@f0000 {
label = "APPSBL"; /* uboot */
reg = <0x000f0000 0x00080000>;
read-only;
};
partition5@170000 {
label = "ART";
reg = <0x00170000 0x00010000>;
read-only;
};
/* 0x00180000 - 0x00200000 unused */
};
pulldowns {
pins = "gpio55", "gpio56",
"gpio57", "gpio60",
"gpio62", "gpio63", "gpio64",
"gpio65", "gpio66", "gpio67",
"gpio69";
function = "qpic";
bias-pull-down;
};
};
mt29f@1 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "spinand,mt29f", "w25n01gv";
reg = <1>;
spi-max-frequency = <24000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition0@0 {
label = "ubi";
reg = <0x00000000 0x08000000>;
};
};
&i2c_0_pins {
pinmux {
function = "blsp_i2c0";
pins = "gpio10";
};
pinconf {
pins = "gpio10";
drive-strength = <16>;
bias-disable;
};
};
target/linux/ipq806x/image/Makefile
浏览文件 @ a75d5c7b
......@@ -267,7 +267,7 @@ define Device/RT-ACRH17
IMAGES = sysupgrade.tar flash-factory.trx
IMAGE/flash-factory.trx := copy-file $(KDIR)/tmp/$$(KERNEL_INITRAMFS_IMAGE) | uImage none
IMAGE/sysupgrade.tar := sysupgrade-tar | append-metadata
DEVICE_PACKAGES := kmod-usb-phy-qcom-ipq4019 ipq-wifi-rt-ac58u ath10k-firmware-qca9984
DEVICE_PACKAGES := kmod-usb-phy-qcom-ipq4019 ath10k-firmware-qca4019 ath10k-firmware-qca9984
endef
define Device/NBG6817
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或