提交 8e012e7d 编写于 作者: C coolsnowwolf

ipq40xx: add support for ASUS RT-ACRH17 v5.4

上级 0c95d8ab
......@@ -18,6 +18,16 @@ asus,rt-ac58u)
ucidef_set_led_netdev "wan" "WAN" "${boardname}:blue:wan" "eth1"
ucidef_set_led_switch "lan" "LAN" "${boardname}:blue:lan" "switch0" "0x1e"
;;
asus,rt-acrh17)
ucidef_set_led_default "status" "STATUS" "${boardname}:blue:status" "1"
ucidef_set_led_wlan "wlan2g" "WLAN2G" "${boardname}:blue:wlan2g" "phy1tpt"
ucidef_set_led_wlan "wlan5g" "WLAN5G" "${boardname}:blue:wlan5g" "phy0tpt"
ucidef_set_led_switch "wan" "WAN(blue)" "${boardname}:blue:wan" "switch0" "0x20"
ucidef_set_led_switch "lan1" "LAN1" "${boardname}:blue:lan1" "switch0" "0x02"
ucidef_set_led_switch "lan2" "LAN2" "${boardname}:blue:lan2" "switch0" "0x04"
ucidef_set_led_switch "lan3" "LAN3" "${boardname}:blue:lan3" "switch0" "0x08"
ucidef_set_led_switch "lan4" "LAN4" "${boardname}:blue:lan4" "switch0" "0x10"
;;
avm,fritzbox-4040)
ucidef_set_led_wlan "wlan" "WLAN" "fritz4040:green:wlan" "phy0tpt" "phy1tpt"
ucidef_set_led_netdev "wan" "WAN" "fritz4040:green:wan" "eth1"
......
......@@ -42,6 +42,7 @@ ipq40xx_setup_interfaces()
openmesh,a62)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
;;
asus,rt-acrh17|\
asus,rt-ac58u|\
zyxel,nbg6617)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
......@@ -113,6 +114,7 @@ ipq40xx_setup_macs()
8dev,habanero-dvk)
label_mac=$(mtd_get_mac_binary "ART" 0x1006)
;;
asus,rt-acrh17|\
asus,rt-ac58u)
CI_UBIPART=UBI_DEV
wan_mac=$(mtd_get_mac_binary_ubi Factory 0x1006)
......
......@@ -23,6 +23,10 @@ case "$FIRMWARE" in
ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
;;
asus,rt-acrh17)
CI_UBIPART=UBI_DEV
caldata_extract_ubi "Factory" 0x9000 0x2f20
;;
avm,fritzrepeater-3000)
/usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
/usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
......@@ -64,6 +68,7 @@ case "$FIRMWARE" in
asus,map-ac2200)
caldata_extract_ubi "Factory" 0x1000 0x2f20
;;
asus,rt-acrh17|\
asus,rt-ac58u)
CI_UBIPART=UBI_DEV
caldata_extract_ubi "Factory" 0x1000 0x2f20
......
......@@ -2,6 +2,7 @@
preinit_set_mac_address() {
case $(board_name) in
asus,rt-acrh17|\
asus,map-ac2200)
base_mac=$(mtd_get_mac_binary_ubi Factory 0x1006)
ip link set dev eth0 address $(macaddr_add "$base_mac" +1)
......
......@@ -198,6 +198,7 @@ platform_do_upgrade() {
CI_KERNPART="linux"
nand_do_upgrade "$1"
;;
asus,rt-acrh17|\
asus,rt-ac58u)
local magic=$(get_magic_long "$1")
CI_UBIPART="UBI_DEV"
......
/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
* Copyright (C) 2019 X-WRT <dev@x-wrt.com>
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
*/
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "ASUS RT-ACRH17";
compatible = "asus,rt-acrh17";
memory {
device_type = "memory";
reg = <0x80000000 0x10000000>;
};
aliases {
led-boot = &power;
led-failsafe = &power;
led-running = &power;
led-upgrade = &power;
};
chosen {
bootargs-append = " ubi.mtd=UBI_DEV";
};
soc {
rng@22000 {
status = "okay";
};
mdio@90000 {
status = "okay";
};
ess-psgmii@98000 {
status = "okay";
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
tcsr@194b000 {
compatible = "qcom,tcsr";
reg = <0x194b000 0x100>;
qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
usb2@60f8800 {
status = "okay";
};
usb3@8af8800 {
status = "okay";
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
ess-switch@c000000 {
status = "okay";
};
edma@c080000 {
status = "okay";
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&tlmm 11 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
leds {
compatible = "gpio-leds";
power: status {
label = "rt-acrh17:blue:status";
gpios = <&tlmm 40 GPIO_ACTIVE_LOW>;
};
lan1 {
label = "rt-acrh17:blue:lan1";
gpios = <&tlmm 45 GPIO_ACTIVE_LOW>;
};
lan2 {
label = "rt-acrh17:blue:lan2";
gpios = <&tlmm 43 GPIO_ACTIVE_LOW>;
};
lan3 {
label = "rt-acrh17:blue:lan3";
gpios = <&tlmm 42 GPIO_ACTIVE_LOW>;
};
lan4 {
label = "rt-acrh17:blue:lan4";
gpios = <&tlmm 49 GPIO_ACTIVE_LOW>;
};
wan_blue {
label = "rt-acrh17:blue:wan";
gpios = <&tlmm 61 GPIO_ACTIVE_HIGH>;
};
wan_red {
label = "rt-acrh17:red:wan";
gpios = <&tlmm 68 GPIO_ACTIVE_HIGH>;
};
wlan2g {
label = "rt-acrh17:blue:wlan2g";
gpios = <&tlmm 52 GPIO_ACTIVE_LOW>;
};
wlan5g {
label = "rt-acrh17:blue:wlan5g";
gpios = <&tlmm 54 GPIO_ACTIVE_LOW>;
};
};
};
&cryptobam {
status = "okay";
};
&blsp_dma {
status = "okay";
};
&qpic_bam {
status = "okay";
};
&nand {
pinctrl-0 = <&nand_pins>;
pinctrl-names = "default";
status = "okay";
nand@0 {
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "Bootloader";
reg = <0x000000000000 0x000000400000>;
read-only;
};
partition@400000 {
label = "UBI_DEV";
reg = <0x000000400000 0x000007C00000>;
};
};
};
};
&tlmm {
serial_pins: serial_pinmux {
mux {
pins = "gpio16", "gpio17";
function = "blsp_uart0";
bias-disable;
};
};
nand_pins: nand_pins {
pullups {
pins = "gpio53", "gpio58",
"gpio59";
function = "qpic";
bias-pull-up;
};
pulldowns {
pins = "gpio55", "gpio56",
"gpio57", "gpio60",
"gpio62", "gpio63", "gpio64",
"gpio65", "gpio66", "gpio67",
"gpio69";
function = "qpic";
bias-pull-down;
};
};
};
&pcie0 {
status = "okay";
perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
bridge@0,0 {
reg = <0x00000000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
wifi2: wifi@1,0 {
compatible = "qcom,ath10k";
status = "okay";
reg = <0x00010000 0 0 0 0>;
};
};
};
&wifi0 {
status = "okay";
qcom,ath10k-calibration-variant = "RT-ACRH17";
};
&blsp1_uart1 {
pinctrl-0 = <&serial_pins>;
pinctrl-names = "default";
status = "okay";
};
&usb3_ss_phy {
status = "okay";
};
&usb3_hs_phy {
status = "okay";
};
&usb2_hs_phy {
status = "okay";
};
......@@ -204,6 +204,24 @@ define Device/asus_rt-ac58u
endef
TARGET_DEVICES += asus_rt-ac58u
define Device/asus_rt-acrh17
$(call Device/FitImageLzma)
DEVICE_VENDOR := ASUS
DEVICE_MODEL := RT-ACRH17
SOC := qcom-ipq4019
BLOCKSIZE := 128k
PAGESIZE := 2048
DTB_SIZE := 65536
IMAGE_SIZE := 20439364
FILESYSTEMS := squashfs
UIMAGE_NAME:=$(shell echo -e '\03\01\01\01RT-AC82U')
KERNEL_INITRAMFS := $$(KERNEL) | uImage none
KERNEL_INITRAMFS_SUFFIX := -factory.trx
IMAGES := sysupgrade.bin
DEVICE_PACKAGES := ath10k-firmware-qca9984-ct ipq-wifi-asus_rt-acrh17 kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += asus_rt-acrh17
define Device/avm_fritzbox-4040
$(call Device/FitImageLzma)
DEVICE_VENDOR := AVM
......
......@@ -10,7 +10,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -785,11 +785,47 @@ dtb-$(CONFIG_ARCH_QCOM) += \
@@ -785,11 +785,48 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-apq8074-dragonboard.dtb \
qcom-apq8084-ifc6540.dtb \
qcom-apq8084-mtp.dtb \
......@@ -48,6 +48,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
+ qcom-ipq4019-e2600ac-c2.dtb \
+ qcom-ipq4019-rtl30vw.dtb \
+ qcom-ipq4019-u4019-32m.dtb \
+ qcom-ipq4019-rt-acrh17.dtb \
+ qcom-ipq4019-wpj419.dtb \
+ qcom-ipq4028-wpj428.dtb \
+ qcom-ipq4029-ap-303.dtb \
......
......@@ -10,7 +10,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -837,11 +837,48 @@ dtb-$(CONFIG_ARCH_QCOM) += \
@@ -837,11 +837,49 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-apq8074-dragonboard.dtb \
qcom-apq8084-ifc6540.dtb \
qcom-apq8084-mtp.dtb \
......@@ -49,6 +49,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
+ qcom-ipq4019-habanero-dvk.dtb \
+ qcom-ipq4019-rtl30vw.dtb \
+ qcom-ipq4019-u4019-32m.dtb \
+ qcom-ipq4019-rt-acrh17.dtb \
+ qcom-ipq4019-wpj419.dtb \
+ qcom-ipq4028-wpj428.dtb \
+ qcom-ipq4029-ap-303.dtb \
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册