luci-app-cpufreq: drop untest target (#3915)

Someone reports that it has bug in arm64

package/lean/luci-app-cpufreq/Makefile

@@ -7,10 +7,10 @@
 include $(TOPDIR)/rules.mk
 
 LUCI_TITLE:=LuCI for CPU Freq Setting
-LUCI_DEPENDS:=@(arm||aarch64)
+LUCI_DEPENDS:=@arm
 PKG_NAME:=luci-app-cpufreq
 PKG_VERSION:=1
-PKG_RELEASE:=3
+PKG_RELEASE:=4
 
 include $(TOPDIR)/feeds/luci/luci.mk
 

package/lean/luci-app-cpufreq/luasrc/controller/cpufreq.lua

@@ -5,7 +5,6 @@ function index()
 	if not nixio.fs.access("/etc/config/cpufreq") then
 		return
 	end
-	
+
 	entry({"admin", "services", "cpufreq"}, cbi("cpufreq"), _("CPU Freq"), 900).dependent=false
 end
-

package/lean/luci-app-cpufreq/root/etc/init.d/cpufreq

@@ -16,14 +16,12 @@ start()
 	local maxfreq=$(uci_get_by_type settings maxfreq 716000)
 	local upthreshold=$(uci_get_by_type settings upthreshold 50)
 	local factor=$(uci_get_by_type settings factor 10)
-	
+
 	echo $governor > /sys/devices/system/cpu/cpufreq/policy0/scaling_governor
-  echo $minifreq > /sys/devices/system/cpu/cpufreq/policy0/scaling_min_freq
-  echo $maxfreq > /sys/devices/system/cpu/cpufreq/policy0/scaling_max_freq
+	echo $minifreq > /sys/devices/system/cpu/cpufreq/policy0/scaling_min_freq
+	echo $maxfreq > /sys/devices/system/cpu/cpufreq/policy0/scaling_max_freq
 	if [ "$governor" == "ondemand" ]; then
-    echo $upthreshold > /sys/devices/system/cpu/cpufreq/ondemand/up_threshold
-    echo $factor > /sys/devices/system/cpu/cpufreq/ondemand/sampling_down_factor
+		echo $upthreshold > /sys/devices/system/cpu/cpufreq/ondemand/up_threshold
+		echo $factor > /sys/devices/system/cpu/cpufreq/ondemand/sampling_down_factor
 	fi
 }
-
-

package/lean/luci-app-cpufreq/root/etc/uci-defaults/cpufreq

@@ -8,4 +8,4 @@ uci -q batch <<-EOF >/dev/null
 EOF
 
 rm -f /tmp/luci-indexcache
-exit 0
\ No newline at end of file
+exit 0

target/linux/ipq806x/base-files/etc/init.d/linksys_recovery

@@ -3,21 +3,18 @@
 
 START=97
 boot() {
-. /lib/functions.sh
+	. /lib/functions.sh
 
-case $(board_name) in
-	linksys,ea8500)
-		# make sure auto_recovery in uboot is always on
-		AUTO_RECOVERY_ENA="`fw_printenv -n auto_recovery`"
-		if [ "$AUTO_RECOVERY_ENA" != "yes" ] ; then
-			fw_setenv auto_recovery yes
-		fi
-		# reset the boot counter
-		mtd resetbc s_env
-		;;
-esac
+	case $(board_name) in
+		linksys,ea8500)
+			# make sure auto_recovery in uboot is always on
+			AUTO_RECOVERY_ENA="`fw_printenv -n auto_recovery`"
+			if [ "$AUTO_RECOVERY_ENA" != "yes" ] ; then
+				fw_setenv auto_recovery yes
+			fi
+			# reset the boot counter
+			mtd resetbc s_env
+			;;
+	esac
 
-echo 35 > /sys/devices/system/cpu/cpufreq/ondemand/up_threshold
-echo 10 > /sys/devices/system/cpu/cpufreq/ondemand/sampling_down_factor
 }
-