Revert "ipq40xx: add p2w-r619ac 128M NAND support ( Needs Opboot 1.0.9 128M ver )"

This reverts commit 176f1241.

target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-p2w-r619ac-128m.dts

-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq4019-r619ac.dtsi"
-
-/ {
-	model = "P&W R619AC 128M";
-	compatible = "p2w,r619ac-128m";
-
-	chosen {
-		bootargs-append = " root=/dev/ubiblock0_1 rootfstype=squashfs";
-	};
-};
-
-&rootfs_part1 {
-	reg = <0x0 0x8000000>;
-};
-
-/delete-node/ &rootfs_part2;

target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-p2w-r619ac.dts

-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq4019-r619ac.dtsi"
-
-/ {
-	model = "P&W R619AC";
-	compatible = "p2w,r619ac";
-
-	chosen {
-		bootargs-append = " root=/dev/ubiblock0_1 rootfstype=squashfs";
-	};
-};

target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-r619ac.dtsi → target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-r619ac.dts

@@ -6,6 +6,9 @@
 #include <dt-bindings/soc/qcom,tcsr.h>
 
 / {
+	model = "P&W R619AC";
+	compatible = "p2w,r619ac";
+
 	aliases {
 		led-boot = &led_sys;
 		led-failsafe = &led_sys;
@@ -14,6 +17,10 @@
 		label-mac-device = &gmac0;
 	};
 
+	chosen {
+		bootargs-append = " root=/dev/ubiblock0_1 rootfstype=squashfs";
+	};
+
 	soc {
 		rng@22000 {
 			status = "okay";
@@ -80,8 +87,6 @@
 
 	leds {
 		compatible = "gpio-leds";
-		pinctrl-0 = <&led_pins>;
-		pinctrl-names = "default";
 
 		led_sys: sys {
 			label = "r619ac:blue:sys";
@@ -130,50 +135,8 @@
 			#size-cells = <1>;
 
 			partition@0 {
-				label = "SBL1";
-				reg = <0x0 0x40000>;
-				read-only;
-			};
-
-			partition@40000 {
-				label = "MIBIB";
-				reg = <0x40000 0x20000>;
-				read-only;
-			};
-
-			partition@60000 {
-				label = "QSEE";
-				reg = <0x60000 0x60000>;
-				read-only;
-			};
-
-			partition@c0000 {
-				label = "CDT";
-				reg = <0xc0000 0x10000>;
-				read-only;
-			};
-
-			partition@d0000 {
-				label = "DDRPARAMS";
-				reg = <0xd0000 0x10000>;
-				read-only;
-			};
-
-			partition@e0000 {
-				label = "APPSBLENV";
-				reg = <0xe0000 0x10000>;
-				read-only;
-			};
-
-			partition@f0000 {
-				label = "APPSBL";
-				reg = <0xf0000 0x80000>;
-				read-only;
-			};
-
-			partition@1 {
 				label = "Bootloader";
-				reg = <0x0 0x170000>;
+				reg = <0 0x170000>;
 			};
 
 			partition@170000 {
@@ -208,12 +171,12 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 
-			rootfs_part1: partition@0 {
+			partition@0 {
 				label = "rootfs";
 				reg = <0x0 0x4000000>;
 			};
 
-			rootfs_part2: partition@4000000 {
+			partition@4000000 {
 				label = "unused1";
 				reg = <0x4000000 0x4000000>;
 			};
@@ -221,6 +184,20 @@
 	};
 };
 
+&pcie0 {
+	status = "okay";
+	perst-gpio = <&tlmm 4 GPIO_ACTIVE_LOW>;
+	wake-gpio = <&tlmm 40 GPIO_ACTIVE_HIGH>;
+
+	/* Free slot for use */
+	bridge@0,0 {
+		reg = <0x00000000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
+	};
+};
+
 &qpic_bam {
 	status = "okay";
 };
@@ -228,6 +205,7 @@
 &sdhci {
 	pinctrl-0 = <&sd_0_pins>;
 	pinctrl-names = "default";
+	cd-gpios = <&tlmm 22 GPIO_ACTIVE_LOW>;
 	vqmmc-supply = <&vqmmc>;
 	status = "okay";
 };
@@ -259,6 +237,12 @@
 			function = "sdio";
 			drive-strength = <16>;
 		};
+
+		mux_3 {
+			pins = "gpio32";
+			function = "gpio";
+			output-low;
+		};
 	};
 
 	serial_0_pins: serial0-pinmux {
@@ -268,29 +252,6 @@
 			bias-disable;
 		};
 	};
-
-	led_pins: led_pinmux {
-		mux {
-			pins = "gpio32", "gpio39", "gpio50";
-			function = "gpio";
-			bias-pull-up;
-			output-low;
-		};
-
-		mux_1 {
-			pins = "gpio52";
-			function = "gpio";
-			bias-pull-up;
-			output-high;
-		};
-
-		mux_2 {
-			pins = "gpio61";
-			function = "gpio";
-			bias-pull-down;
-			output-high;
-		};
-	};
 };
 
 &usb3_ss_phy {
@@ -317,4 +278,4 @@
 &wifi1 {
 	status = "okay";
 	qcom,ath10k-calibration-variant = "R619AC";
-};
+};
\ No newline at end of file

target/linux/ipq40xx/image/Makefile

@@ -89,7 +89,7 @@ define Device/asus_rt-ac58u
 	KERNEL_INITRAMFS := $$(KERNEL) | uImage none
 	KERNEL_INITRAMFS_SUFFIX := -factory.trx
 	IMAGES := sysupgrade.bin
-	DEVICE_PACKAGES := kmod-usb-ledtrig-usbport -kmod-ath10k-ct -ath10k-firmware-qca4019-ct kmod-ath10k ath10k-firmware-qca4019
+	DEVICE_PACKAGES := kmod-usb-ledtrig-usbport
 endef
 TARGET_DEVICES += asus_rt-ac58u
 
@@ -291,20 +291,6 @@ define Device/p2w_r619ac
 endef
 TARGET_DEVICES += p2w_r619ac
 
-define Device/p2w_r619ac-128m
-	$(call Device/FitzImage)
-	$(call Device/UbiFit)
-	DEVICE_VENDOR := P&W
-	DEVICE_MODEL := R619AC
-	DEVICE_VARIANT := 128M
-	DEVICE_DTS := qcom-ipq4019-p2w-r619ac-128m
-	DEVICE_DTS_CONFIG := config@10
-	BLOCKSIZE := 128k
-	PAGESIZE := 2048
-	DEVICE_PACKAGES := ipq-wifi-p2w_r619ac
-endef
-TARGET_DEVICES += p2w_r619ac-128m
-
 define Device/qcom_ap-dk04.1-c1
 	$(call Device/FitImage)
 	$(call Device/UbiFit)