Merge pull request #21495 from taosdata/docs/TD-23990-3.0

chore: update docs about support row/columns width up to 64KB

docs/en/12-taos-sql/01-data-type.md

@@ -45,7 +45,7 @@ In TDengine, the data types below can be used when specifying a column or tag.
 :::note
 
 - Only ASCII visible characters are suggested to be used in a column or tag of BINARY type. Multi-byte characters must be stored in NCHAR type.
-- The length of BINARY can be up to 16,374 bytes. The string value must be quoted with single quotes. You must specify a length in bytes for a BINARY value, for example binary(20) for up to twenty single-byte characters. If the data exceeds the specified length, an error will occur. The literal single quote inside the string must be preceded with back slash like `\'`
+- The length of BINARY can be up to 16,374(data column is 65,517 and tag column is 16,382 since version 3.0.5.0) bytes. The string value must be quoted with single quotes. You must specify a length in bytes for a BINARY value, for example binary(20) for up to twenty single-byte characters. If the data exceeds the specified length, an error will occur. The literal single quote inside the string must be preceded with back slash like `\'`
 - Numeric values in SQL statements will be determined as integer or float type according to whether there is decimal point or whether scientific notation is used, so attention must be paid to avoid overflow. For example, 9999999999999999999 will be considered as overflow because it exceeds the upper limit of long integer, but 9999999999999999999.0 will be considered as a legal float number.
 
 :::

docs/en/12-taos-sql/03-table.md

@@ -45,7 +45,7 @@ table_option: {
 
 1. The first column of a table MUST be of type TIMESTAMP. It is automatically set as the primary key.
 2. The maximum length of the table name is 192 bytes.
-3. The maximum length of each row is 48k bytes, please note that the extra 2 bytes used by each BINARY/NCHAR column are also counted.
+3. The maximum length of each row is 48k(64k since version 3.0.5.0) bytes, please note that the extra 2 bytes used by each BINARY/NCHAR column are also counted.
 4. The name of the subtable can only consist of characters from the English alphabet, digits and underscore. Table names can't start with a digit. Table names are case insensitive.
 5. The maximum length in bytes must be specified when using BINARY or NCHAR types.
 6. Escape character "\`" can be used to avoid the conflict between table names and reserved keywords, above rules will be bypassed when using escape character on table names, but the upper limit for the name length is still valid. The table names specified using escape character are case sensitive.

docs/en/12-taos-sql/19-limit.md

@@ -26,7 +26,7 @@ The following characters cannot occur in a password: single quotation marks ('),
 
 - Maximum length of database name is 64 bytes
 - Maximum length of table name is 192 bytes, excluding the database name prefix and the separator.
-- Maximum length of each data row is 48K bytes. Note that the upper limit includes the extra 2 bytes consumed by each column of BINARY/NCHAR type.
+- Maximum length of each data row is 48K(64K since version 3.0.5.0) bytes. Note that the upper limit includes the extra 2 bytes consumed by each column of BINARY/NCHAR type.
 - The maximum length of a column name is 64 bytes.
 - Maximum number of columns is 4096. There must be at least 2 columns, and the first column must be timestamp.
 - The maximum length of a tag name is 64 bytes

docs/en/14-reference/13-schemaless/13-schemaless.md

@@ -90,7 +90,7 @@ You can configure smlChildTableName in taos.cfg to specify table names, for exam
    Note: TDengine 3.0.3.0 and later automatically detect whether order is consistent. This parameter is no longer used.
 
 :::tip
-All processing logic of schemaless will still follow TDengine's underlying restrictions on data structures, such as the total length of each row of data cannot exceed 48 KB and the total length of a tag value cannot exceed 16 KB. See [TDengine SQL Boundary Limits](/taos-sql/limit) for specific constraints in this area.
+All processing logic of schemaless will still follow TDengine's underlying restrictions on data structures, such as the total length of each row of data cannot exceed 48 KB(64 KB since version 3.0.5.0) and the total length of a tag value cannot exceed 16 KB. See [TDengine SQL Boundary Limits](/taos-sql/limit) for specific constraints in this area.
 :::
 
 ## Time resolution recognition

docs/zh/12-taos-sql/01-data-type.md

@@ -45,9 +45,9 @@ CREATE DATABASE db_name PRECISION 'ns';
 
 :::note
 
-- 表的每行长度不能超过 48KB（注意：每个 BINARY/NCHAR 类型的列还会额外占用 2 个字节的存储位置）。
+- 表的每行长度不能超过 48KB（从 3.0.5.0 版本开始为 64KB）（注意：每个 BINARY/NCHAR 类型的列还会额外占用 2 个字节的存储位置）。
 - 虽然 BINARY 类型在底层存储上支持字节型的二进制字符，但不同编程语言对二进制数据的处理方式并不保证一致，因此建议在 BINARY 类型中只存储 ASCII 可见字符，而避免存储不可见字符。多字节的数据，例如中文字符，则需要使用 NCHAR 类型进行保存。如果强行使用 BINARY 类型保存中文字符，虽然有时也能正常读写，但并不带有字符集信息，很容易出现数据乱码甚至数据损坏等情况。
-- BINARY 类型理论上最长可以有 16,374 字节。BINARY 仅支持字符串输入，字符串两端需使用单引号引用。使用时须指定大小，如 BINARY(20) 定义了最长为 20 个单字节字符的字符串，每个字符占 1 字节的存储空间，总共固定占用 20 字节的空间，此时如果用户字符串超出 20 字节将会报错。对于字符串内的单引号，可以用转义字符反斜线加单引号来表示，即 `\'`。
+- BINARY 类型理论上最长可以有 16,374（从 3.0.5.0 版本开始，数据列为 65,517，标签列为 16,382） 字节。BINARY 仅支持字符串输入，字符串两端需使用单引号引用。使用时须指定大小，如 BINARY(20) 定义了最长为 20 个单字节字符的字符串，每个字符占 1 字节的存储空间，总共固定占用 20 字节的空间，此时如果用户字符串超出 20 字节将会报错。对于字符串内的单引号，可以用转义字符反斜线加单引号来表示，即 `\'`。
 - SQL 语句中的数值类型将依据是否存在小数点，或使用科学计数法表示，来判断数值类型是否为整型或者浮点型，因此在使用时要注意相应类型越界的情况。例如，9999999999999999999 会认为超过长整型的上边界而溢出，而 9999999999999999999.0 会被认为是有效的浮点数。
 
 :::

docs/zh/12-taos-sql/03-table.md

@@ -43,7 +43,7 @@ table_option: {
 
 1. 表的第一个字段必须是 TIMESTAMP，并且系统自动将其设为主键；
 2. 表名最大长度为 192；
-3. 表的每行长度不能超过 48KB;（注意：每个 BINARY/NCHAR 类型的列还会额外占用 2 个字节的存储位置）
+3. 表的每行长度不能超过 48KB（从 3.0.5.0 版本开始为 64KB）;（注意：每个 BINARY/NCHAR 类型的列还会额外占用 2 个字节的存储位置）
 4. 子表名只能由字母、数字和下划线组成，且不能以数字开头，不区分大小写
 5. 使用数据类型 binary 或 nchar，需指定其最长的字节数，如 binary(20)，表示 20 字节；
 6. 为了兼容支持更多形式的表名，TDengine 引入新的转义符 "\`"，可以让表名与关键词不冲突，同时不受限于上述表名称合法性约束检查。但是同样具有长度限制要求。使用转义字符以后，不再对转义字符中的内容进行大小写统一。

docs/zh/12-taos-sql/19-limit.md

@@ -26,7 +26,7 @@ description: 合法字符集和命名中的限制规则
 
 - 数据库名最大长度为 64 字节
 - 表名最大长度为 192 字节，不包括数据库名前缀和分隔符
-- 每行数据最大长度 48KB （注意：数据行内每个 BINARY/NCHAR 类型的列还会额外占用 2 个字节的存储位置）
+- 每行数据最大长度 48KB（从 3.0.5.0 版本开始为 64KB） （注意：数据行内每个 BINARY/NCHAR 类型的列还会额外占用 2 个字节的存储位置）
 - 列名最大长度为 64 字节
 - 最多允许 4096 列，最少需要 2 列，第一列必须是时间戳。
 - 标签名最大长度为 64 字节

docs/zh/14-reference/13-schemaless/13-schemaless.md

@@ -87,7 +87,7 @@ st,t1=3,t2=4,t3=t3 c1=3i64,c3="passit",c2=false,c4=4f64 1626006833639000000
 
 :::tip
 无模式所有的处理逻辑，仍会遵循 TDengine 对数据结构的底层限制，例如每行数据的总长度不能超过
-48KB，标签值的总长度不超过16KB。这方面的具体限制约束请参见 [TDengine SQL 边界限制](/taos-sql/limit)
+48KB（从 3.0.5.0 版本开始为 64KB），标签值的总长度不超过16KB。这方面的具体限制约束请参见 [TDengine SQL 边界限制](/taos-sql/limit)
 
 :::