未验证 提交 dbd882ff 编写于 作者: L Linhe Huo 提交者: GitHub

Merge pull request #19626 from taosdata/fix/update-helm-chart-version

docs: update helm chart version to 3.0.2
......@@ -22,7 +22,7 @@ Helm uses the kubectl and kubeconfig configurations to perform Kubernetes operat
To use TDengine Chart, download it from GitHub:
```bash
wget https://github.com/taosdata/TDengine-Operator/raw/3.0/helm/tdengine-3.0.0.tgz
wget https://github.com/taosdata/TDengine-Operator/raw/3.0/helm/tdengine-3.0.2.tgz
```
......@@ -38,7 +38,7 @@ With minikube, the default value is standard.
Use Helm commands to install TDengine:
```bash
helm install tdengine tdengine-3.0.0.tgz \
helm install tdengine tdengine-3.0.2.tgz \
--set storage.className=<your storage class name>
```
......@@ -46,7 +46,7 @@ helm install tdengine tdengine-3.0.0.tgz \
You can configure a small storage size in minikube to ensure that your deployment does not exceed your available disk space.
```bash
helm install tdengine tdengine-3.0.0.tgz \
helm install tdengine tdengine-3.0.2.tgz \
--set storage.className=standard \
--set storage.dataSize=2Gi \
--set storage.logSize=10Mi
......@@ -83,14 +83,14 @@ You can configure custom parameters in TDengine with the `values.yaml` file.
Run the `helm show values` command to see all parameters supported by TDengine Chart.
```bash
helm show values tdengine-3.0.0.tgz
helm show values tdengine-3.0.2.tgz
```
Save the output of this command as `values.yaml`. Then you can modify this file with your desired values and use it to deploy a TDengine cluster:
```bash
helm install tdengine tdengine-3.0.0.tgz -f values.yaml
helm install tdengine tdengine-3.0.2.tgz -f values.yaml
```
......@@ -107,7 +107,7 @@ image:
prefix: tdengine/tdengine
#pullPolicy: Always
# Overrides the image tag whose default is the chart appVersion.
# tag: "3.0.0.0"
# tag: "3.0.2.0"
service:
# ClusterIP is the default service type, use NodeIP only if you know what you are doing.
......@@ -155,15 +155,15 @@ clusterDomainSuffix: ""
# See the [Configuration Variables](../../reference/config)
#
# Note:
# 1. firstEp/secondEp: should not be setted here, it's auto generated at scale-up.
# 2. serverPort: should not be setted, we'll use the default 6030 in many places.
# 3. fqdn: will be auto generated in kubenetes, user should not care about it.
# 1. firstEp/secondEp: should not be set here, it's auto generated at scale-up.
# 2. serverPort: should not be set, we'll use the default 6030 in many places.
# 3. fqdn: will be auto generated in kubernetes, user should not care about it.
# 4. role: currently role is not supported - every node is able to be mnode and vnode.
#
# Btw, keep quotes "" around the value like below, even the value will be number or not.
taoscfg:
# Starts as cluster or not, must be 0 or 1.
# 0: all pods will start as a seperate TDengine server
# 0: all pods will start as a separate TDengine server
# 1: pods will start as TDengine server cluster. [default]
CLUSTER: "1"
......
......@@ -4,7 +4,7 @@ title: 使用 Helm 部署 TDengine 集群
description: 使用 Helm 部署 TDengine 集群的详细指南
---
Helm 是 Kubernetes 的包管理器,上一节使用 Kubernets 部署 TDengine 集群的操作已经足够简单,但 Helm 依然可以提供更强大的能力。
Helm 是 Kubernetes 的包管理器,上一节使用 Kubernetes 部署 TDengine 集群的操作已经足够简单,但 Helm 依然可以提供更强大的能力。
## 安装 Helm
......@@ -23,7 +23,7 @@ Helm 会使用 kubectl 和 kubeconfig 的配置来操作 Kubernetes,可以参
TDengine Chart 尚未发布到 Helm 仓库,当前可以从 GitHub 直接下载:
```bash
wget https://github.com/taosdata/TDengine-Operator/raw/3.0/helm/tdengine-3.0.0.tgz
wget https://github.com/taosdata/TDengine-Operator/raw/3.0/helm/tdengine-3.0.2.tgz
```
......@@ -39,7 +39,7 @@ kubectl get storageclass
之后,使用 helm 命令安装:
```bash
helm install tdengine tdengine-3.0.0.tgz \
helm install tdengine tdengine-3.0.2.tgz \
--set storage.className=<your storage class name>
```
......@@ -47,7 +47,7 @@ helm install tdengine tdengine-3.0.0.tgz \
在 minikube 环境下,可以设置一个较小的容量避免超出磁盘可用空间:
```bash
helm install tdengine tdengine-3.0.0.tgz \
helm install tdengine tdengine-3.0.2.tgz \
--set storage.className=standard \
--set storage.dataSize=2Gi \
--set storage.logSize=10Mi
......@@ -84,14 +84,14 @@ TDengine 支持 `values.yaml` 自定义。
通过 helm show values 可以获取 TDengine Chart 支持的全部 values 列表:
```bash
helm show values tdengine-3.0.0.tgz
helm show values tdengine-3.0.2.tgz
```
你可以将结果保存为 values.yaml,之后可以修改其中的各项参数,如 replica 数量,存储类名称,容量大小,TDengine 配置等,然后使用如下命令安装 TDengine 集群:
```bash
helm install tdengine tdengine-3.0.0.tgz -f values.yaml
helm install tdengine tdengine-3.0.2.tgz -f values.yaml
```
......@@ -108,7 +108,7 @@ image:
prefix: tdengine/tdengine
#pullPolicy: Always
# Overrides the image tag whose default is the chart appVersion.
# tag: "3.0.0.0"
# tag: "3.0.2.0"
service:
# ClusterIP is the default service type, use NodeIP only if you know what you are doing.
......@@ -156,15 +156,15 @@ clusterDomainSuffix: ""
# See the variable list at https://www.taosdata.com/cn/documentation/administrator .
#
# Note:
# 1. firstEp/secondEp: should not be setted here, it's auto generated at scale-up.
# 2. serverPort: should not be setted, we'll use the default 6030 in many places.
# 3. fqdn: will be auto generated in kubenetes, user should not care about it.
# 1. firstEp/secondEp: should not be set here, it's auto generated at scale-up.
# 2. serverPort: should not be set, we'll use the default 6030 in many places.
# 3. fqdn: will be auto generated in kubernetes, user should not care about it.
# 4. role: currently role is not supported - every node is able to be mnode and vnode.
#
# Btw, keep quotes "" around the value like below, even the value will be number or not.
taoscfg:
# Starts as cluster or not, must be 0 or 1.
# 0: all pods will start as a seperate TDengine server
# 0: all pods will start as a separate TDengine server
# 1: pods will start as TDengine server cluster. [default]
CLUSTER: "1"
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册