Update 03-get-started.md

docs-en/03-get-started/03-get-started.md

 ---
 title: Get Started
-description: "从 Docker，安装包或使用 apt-get 快速安装 TDengine, 通过命令行程序TAOS CLI和工具 taosdemo 快速体验 TDengine 功能"
+description: "Install TDengine from Docker image, apt-get or package, and run TAOS CLI and taosBenchmark to experience the features"
 ---
 
 import Tabs from "@theme/Tabs";
@@ -8,38 +8,38 @@ import TabItem from "@theme/TabItem";
 import PkgInstall from "./\_pkg_install.mdx";
 import AptGetInstall from "./\_apt_get_install.mdx";
 
-## 安装
+## Install
 
-TDengine 完整的软件包包括服务端(taosd)、用于与第三方系统对接并提供RESTful接口的taosAdapter、应用驱动(taosc)、命令行程序 (CLI，taos) 和一些工具软件，目前 2.X 版服务端taosd、taosAdapter 仅在 Linux 系统上安装和运行，后续将支持 Windows、macOS 等系统。应用驱动 taosc 与 TDengine CLI 可以在 Windows 或 Linux 上安装和运行。TDengine 除 RESTful接口外，还提供一些列编程语言的连接器。2.4 之前的版本中，无 taosAdapter，RESTfule 接口均由 taosd 内置的 http 服务提供。
+The complete package of TDengine includes server(taosd), taosAdapter for connecting with third-party systems and providing RESTful interface, application driver(taosc), command line program(CLI, taos) and some tools. For current version, the server taosd and taosAdapter can only be installed and run on Linux systems, and will support Windows, macOS and other systems in the future. The application driver taosc and TDengine CLI can be installed and run on Windows or Linux. In addition to the RESTful interface, TDengine also provides connectors for a number of programming languages. In versions before 2.4, there is no taosAdapter, and the RESTfule interface is provided by the built-in http service of taosd.
 
-TDengine 支持 X64/ARM64/MIPS64/Alpha64 硬件平台，后续将支持 ARM32、RISC-V 等 CPU 架构。
+TDengine supports X64/ARM64/MIPS64/Alpha64 hardware platforms, and will support ARM32, RISC-V and other CPU architectures in the future.
 
 <Tabs defaultValue="apt-get">
 <TabItem value="docker" label="Docker">
-如果已经安装了 docker， 只需执行下面的命令。
+If docker is already installed on your computer, execute the following command:           
 
 ```shell
 docker run -d -p 6030-6049:6030-6049 -p 6030-6049:6030-6049/udp tdengine/tdengine
 ```
 
-确定该容器已经启动并且在正常运行
+Make sure the container is running
 
 ```shell
 docker ps
 ```
 
-进入该容器并执行 bash
+Enter into container and execute bash
 
 ```shell
 docker exec -it <containrid> bash
 ```
 
-然后就可以执行相关的 Linux 命令操作和访问 TDengine
+Then you can execute the Linux commands and access TDengine.
 
-详细操作方法请参照 [通过 Docker 快速体验 TDengine](/train-faq/docker)。
+For detailed steps, please visit [Experience TDengine via Docker](/train-faq/docker)。
 
 :::info
-从 2.4.0.10 开始，除 taosd 以外，Docker 镜像还包含：taos、taosAdapter、taosdump、taosBenchmark、TDinsight 安装脚本和示例代码。启动 Docker 容器时，将同时启动 taosAdapter 和 taosd，实现对 RESTful 的支持。
+Starting from 2.4.0.10，besides taosd，TDengine docker image includes: taos，taosAdapter，taosdump，taosBenchmark，TDinsight, scripts and sample code. Once the TDengine container is started，it will start both taosAdapter and taosd automatically to support RESTful interface.
 
 :::
 
@@ -47,66 +47,64 @@ docker exec -it <containrid> bash
 <TabItem value="apt-get" label="apt-get">
 <AptGetInstall />
 </TabItem>
-<TabItem value="pkg" label="安装包">
+<TabItem value="pkg" label="Package">
 <PkgInstall />
 </TabItem>
-<TabItem value="src" label="源码">
+<TabItem value="src" label="Source Code">
 
-如果您希望对 TDengine 贡献代码或对内部实现感兴趣，请参考我们的 [TDengine GitHub 主页](https://github.com/taosdata/TDengine) 下载源码构建和安装.
-
-下载其他组件、最新 Beta 版及之前版本的安装包，请点击[这里](https://www.taosdata.com/cn/all-downloads/)。
+If you like to check the source code, build the package by youself or contribute to the project, please check [TDengine GitHub Repository](https://github.com/taosdata/TDengine) 
 
 </TabItem>
 </Tabs>
 
-## 启动
+## Start
 
-安装后，请使用 `systemctl` 命令来启动 TDengine 的服务进程。
+After installation，please execute `systemctl` to start taosd, the server part of TDengine.
 
 ```bash
 systemctl start taosd
 ```
 
-检查服务是否正常工作：
+Check if taosd is running：
 
 ```bash
 systemctl status taosd
 ```
 
-如果 TDengine 服务正常工作，那么您可以通过 TDengine 的命令行程序 `taos` 来访问并体验 TDengine。
+If everything is fine，you can run TDengine command line interface `taos` to access TDengine and play around it.
 
 :::info
 
-- systemctl 命令需要 _root_ 权限来运行，如果您非 _root_ 用户，请在命令前添加 sudo 。
-- 为更好的获得产品反馈，改善产品，TDengine 会采集基本的使用信息，但您可以修改系统配置文件 taos.cfg 里的配置参数 telemetryReporting，将其设为 0，就可将其关闭。
-- TDengine 采用 FQDN（一般就是 hostname）作为节点的 ID，为保证正常运行，需要给运行 taosd 的服务器配置好 FQDN，在 TDengine CLI 或应用运行的机器配置好 DNS 服务或 hosts 文件，保证 FQDN 能够解析。
-- `systemctl stop taosd` 指令在执行后并不会马上停止 TDengine 服务，而是会等待系统中必要的落盘工作正常完成。在数据量很大的情况下，这可能会消耗较长时间。
+- systemctl requires _root_ privileges，if you are not _root_ ，please add sudo before the command.
+- To get feedback and keep polishing the prodcut, TDengine is colleting some basic usage information, but you can turn it off by setting telemetryReporting to 0 in configuration file taos.cfg. 
+- TDengine uses FQDN (hostname in simple case）as the ID for a node. To make system work, you need to configure the FQDN for the server running taosd, and configure the DNS service or hosts file on the TDengine CLI or the machine where the application runs to ensure that the FQDN can be resolved.     
+- `systemctl stop taosd` won't stop the server right away, it will wait until all the data in memory are flushed to disk. It may takes time depending on the cache size.
 
-TDengine 支持在使用 [`systemd`](https://en.wikipedia.org/wiki/Systemd) 做进程服务管理的 Linux 系统上安装，用 `which systemctl` 命令来检测系统中是否存在 `systemd` 包:
+TDengine supports the installation on system which runs [`systemd`](https://en.wikipedia.org/wiki/Systemd) for process management，use `which systemctl` to check if the system has `systemd` installed:
 
 ```bash
 which systemctl
 ```
 
-如果系统中不支持 `systemd`，也可以用手动运行 `/usr/local/taos/bin/taosd` 方式启动 TDengine 服务。
+If the system does not have `systemd`，you can start TDengine manually by executing `/usr/local/taos/bin/taosd`
 
 :::note
 
-## TDengine 命令行 (CLI)
-
-为便于检查 TDengine 的状态，执行各种即席(Ad Hoc)查询，TDengine 提供一命令行应用程序(以下简称为 TDengine CLI) taos。要进入 TDengine 命令行，您只要在安装有 TDengine 的 Linux 终端执行 `taos` 即可。
+## TDengine Command Line Interface
+           
+To manage the TDengine running instance，or execute ad-hoc queries, TDengine provides a Command Line Interface(hereinafter referred to as TDengine CLI) taos. To enter into the interactive CLI shell，execute `taos` on a Linux terminal where TDengine is installed.
 
 ```bash
 taos
 ```
 
-如果连接服务成功，将会打印出欢迎消息和版本信息。如果失败，则会打印错误消息出来（请参考 [FAQ](/train-faq/faq) 来解决终端连接服务端失败的问题）。 TDengine CLI 的提示符号如下：
+If it connects to the TDengine server successfully, it will print out the version and welcome message. If it fails, it will print out the error message, please check [FAQ](/train-faq/faq) for trouble shooting connection issue. TDengine CLI's prompt is：
 
 ```cmd
 taos>
 ```
 
-在 TDengine CLI中，用户可以通过 SQL 命令来创建/删除数据库、表等，并进行插入查询操作。在终端中运行的 SQL 语句需要以分号结束来运行。示例：
+Inside TDengine CLI，you can execute SQL commands to create/drop database/table, and run queries. The SQL command must be eneded with a semicolon. For example: 
 
 ```sql
 create database demo;
@@ -121,52 +119,50 @@ select * from t;
  2019-07-15 01:00:00.000 |          20 |
 Query OK, 2 row(s) in set (0.003128s)
 ```
+Besides executing SQL commands, system administrator can check running status, add/drop user accounts and manage the running instances. TAOS CLI with application driver can be installed and run on either Linux or windows machine. For more details on CLI, please [check here](../reference/taos-shell/).
 
-除执行 SQL 语句外，系统管理员还可以从 TDengine CLI 进行检查系统运行状态、添加删除用户账号等操作。TAOS CLI 连同应用驱动也可以独立安装在 Linux 或 windows 机器上运行，更多细节请参考 [这里](../reference/taos-shell/)
-
-## 使用 taosBenchmark 体验写入速度
+## run taosBenchmark to experience the high-performance
 
-启动 TDengine 的服务，在 Linux 终端执行 `taosBenchmark` （曾命名为 `taosdemo`）：
+After TDengine server is running，execute `taosBenchmark`(named as taosdemo before) from a Linux terminal：
 
 ```bash
 taosBenchmark
 ```
+This command will create a super table "meters" under database "test". Unde "meters", 10000 tables are created with name from "d0" to "d9999". Each table has 10000 rows and each row has four columns (ts, current, voltage, phase). Time stamp is starting from "2017-07-14 10:40:00 000" to "2017-07-14 10:40:09 999". Each table has tags "location" and "groupId". groupId is set 1 to 10 randomly, and location is set to "beijing" or "shanghai".
 
-该命令将在数据库 test 下面自动创建一张超级表 meters，该超级表下有 1 万张表，表名为 "d0" 到 "d9999"，每张表有 1 万条记录，每条记录有 (ts, current, voltage, phase) 四个字段，时间戳从 "2017-07-14 10:40:00 000" 到 "2017-07-14 10:40:09 999"，每张表带有标签 location 和 groupId，groupId 被设置为 1 到 10， location 被设置为 "beijing" 或者 "shanghai"。
-
-这条命令很快完成 1 亿条记录的插入。具体时间取决于硬件性能，即使在一台普通的 PC 服务器往往也仅需十几秒。
-
-taosBenchmark 命令本身带有很多选项，配置表的数目、记录条数等等，您可以设置不同参数进行体验，请执行 `taosBenchmark --help` 详细列出。taosBenchmark 详细使用方法请参照 [如何使用 taosBenchmark 对 TDengine 进行性能测试](https://www.taosdata.com/2021/10/09/3111.html)。
+This command will insert 100 million rows into database quickly. Depends on the hardware configuration, it only takes around 15 seconds for a regular PC server.            
 
-## 使用 TDengine CLI 体验查询速度
+taosBenchmark provides you command line options and confuguration file to customize the scenarios, like number of tables, number of rows per table, number of columns and more. Please execute `taosBenchmark --help` to list them. For details on running taosBenchmark, please check [reference for taosBenchmark](/reference/taosbenchmark)
 
-使用上述 taosBenchmark 插入数据后，可以在 TDengine CLI 输入查询命令，体验查询速度。
+## Experience query speed with TDengine CLI
+           
+After using taosBenchmark to insert a number of rows data, you can execute queries to experience the performance from CLI.
 
-查询超级表下记录总条数：
+query the total number of rows under super table "meters"：
 
 ```sql
 taos> select count(*) from test.meters;
 ```
 
-查询 1 亿条记录的平均值、最大值、最小值等：
+query the average, maximum, minimum of 100 million rows:
 
 ```sql
 taos> select avg(current), max(voltage), min(phase) from test.meters;
 ```
 
-查询 location="beijing" 的记录总条数：
+query the total number of rows with location="beijing":
 
 ```sql
 taos> select count(*) from test.meters where location="beijing";
 ```
 
-查询 groupId=10 的所有记录的平均值、最大值、最小值等：
+query the average, maximum, minimum of all rows with groupId=10:
 
 ```sql
 taos> select avg(current), max(voltage), min(phase) from test.meters where groupId=10;
 ```
 
-对表 d10 按 10s 进行平均值、最大值和最小值聚合统计：
+query the average, maximum, minimum for table d10 in 10 seconds time interal：
 
 ```sql
 taos> select avg(current), max(voltage), min(phase) from test.d10 interval(10s);