description:Install, Uninstall, Start, Stop and Upgrade
---
import Tabs from "@theme/Tabs";
import TabItem from "@theme/TabItem";
TDengine community version provides deb and rpm packages for users to choose from, based on their system environment. The deb package supports Debian, Ubuntu and derivative systems. The rpm package supports CentOS, RHEL, SUSE and derivative systems. Furthermore, a tar.gz package is provided for TDengine Enterprise customers.
This document gives more information about installing, uninstalling, and upgrading TDengine.
## Install
...
...
@@ -15,11 +15,16 @@ About details of installing TDenine, please refer to [Installation Guide](../../
Deb package of TDengine can be uninstalled as below:
```bash
```
$ sudo dpkg -r tdengine
(Reading database ... 137504 files and directories currently installed.)
Removing tdengine (3.0.0.0) ...
...
...
@@ -46,115 +51,60 @@ tar.gz package of TDengine can be uninstalled as below:
```
$ rmtaos
Nginx for TDengine is running, stopping it...
TDengine is removed successfully!
taosKeeper is removed successfully!
```
</TabItem>
<TabItemlabel="Windows uninstall"value="windows">
Run C:\TDengine\unins000.exe to uninstall TDengine on a Windows system.
</TabItem>
</Tabs>
:::note
:::info
- We strongly recommend not to use multiple kinds of installation packages on a single host TDengine.
- After deb package is installed, if the installation directory is removed manually, uninstall or reinstall will not work. This issue can be resolved by using the command below which cleans up TDengine package information. You can then reinstall if needed.
- We strongly recommend not to use multiple kinds of installation packages on a single host TDengine. The packages may affect each other and cause errors.
```bash
$ sudo rm-f /var/lib/dpkg/info/tdengine*
```
- After deb package is installed, if the installation directory is removed manually, uninstall or reinstall will not work. This issue can be resolved by using the command below which cleans up TDengine package information.
- After rpm package is installed, if the installation directory is removed manually, uninstall or reinstall will not work. This issue can be resolved by using the command below which cleans up TDengine package information. You can then reinstall if needed.
```
$ sudo rm -f /var/lib/dpkg/info/tdengine*
```
```bash
$ sudo rpm -e--noscripts tdengine
```
You can then reinstall if needed.
:::
- After rpm package is installed, if the installation directory is removed manually, uninstall or reinstall will not work. This issue can be resolved by using the command below which cleans up TDengine package information.
## Installation Directory
TDengine is installed at /usr/local/taos if successful.
```bash
$ cd /usr/local/taos
$ ll
$ ll
total 28
drwxr-xr-x 7 root root 4096 Feb 22 09:34 ./
drwxr-xr-x 12 root root 4096 Feb 22 09:34 ../
drwxr-xr-x 2 root root 4096 Feb 22 09:34 bin/
drwxr-xr-x 2 root root 4096 Feb 22 09:34 cfg/
lrwxrwxrwx 1 root root 13 Feb 22 09:34 data -> /var/lib/taos/
drwxr-xr-x 2 root root 4096 Feb 22 09:34 driver/
drwxr-xr-x 10 root root 4096 Feb 22 09:34 examples/
- Configuration directory, data directory, and log directory are created automatically if they don't exist
- The default configuration file is located at /etc/taos/taos.cfg, which is a copy of /usr/local/taos/cfg/taos.cfg
- The default data directory is /var/lib/taos, which is a soft link to /usr/local/taos/data
- The default log directory is /var/log/taos, which is a soft link to /usr/local/taos/log
- The executables at /usr/local/taos/bin are linked to /usr/bin
- The DLL files at /usr/local/taos/driver are linked to /usr/lib
- The header files at /usr/local/taos/include are linked to /usr/include
:::
:::note
Uninstalling and Modifying Files
- When TDengine is uninstalled, the configuration /etc/taos/taos.cfg, data directory /var/lib/taos, log directory /var/log/taos are kept. They can be deleted manually with caution, because data can't be recovered. Please follow data integrity, security, backup or relevant SOPs before deleting any data.
- When reinstalling TDengine, if the default configuration file /etc/taos/taos.cfg exists, it will be kept and the configuration file in the installation package will be renamed to taos.cfg.orig and stored at /usr/local/taos/cfg to be used as configuration sample. Otherwise the configuration file in the installation package will be installed to /etc/taos/taos.cfg and used.
## Start and Stop
Linux system services `systemd`, `systemctl` or `service` are used to start, stop and restart TDengine. The server process of TDengine is `taosd`, which is started automatically after the Linux system is started. System operators can use `systemd`, `systemctl` or `service` to start, stop or restart TDengine server.
For example, if using `systemctl` , the commands to start, stop, restart and check TDengine server are below:
- Start server：`systemctl start taosd`
- Stop server：`systemctl stop taosd`
- Restart server：`systemctl restart taosd`
- Check server status：`systemctl status taosd`
Another component named as `taosAdapter` is to provide HTTP service for TDengine, it should be started and stopped using `systemctl`.
If the server process is OK, the output of `systemctl status` is like below:
```
Active: active (running)
```
Otherwise, the output is as below:
- When reinstalling TDengine, if the default configuration file /etc/taos/taos.cfg exists, it will be kept and the configuration file in the installation package will be renamed to taos.cfg.orig and stored at /usr/local/taos/cfg to be used as configuration sample. Otherwise the configuration file in the installation package will be installed to /etc/taos/taos.cfg and used.
```
Active: inactive (dead)
```
## Upgrade
There are two aspects in upgrade operation: upgrade installation package and upgrade a running server.
To upgrade a package, follow the steps mentioned previously to first uninstall the old version then install the new version.
Upgrading a running server is much more complex. First please check the version number of the old version and the new version. The version number of TDengine consists of 4 sections, only if the first 3 sections match can the old version be upgraded to the new version. The steps of upgrading a running server are as below:
- Stop inserting data
- Make sure all data is persisted to disk
- Make some simple queries (Such as total rows in stables, tables and so on. Note down the values. Follow best practices and relevant SOPs.)
- Stop the cluster of TDengine
- Uninstall old version and install new version
- Start the cluster of TDengine
- Execute simple queries, such as the ones executed prior to installing the new package, to make sure there is no data loss
- Execute simple queries, such as the ones executed prior to installing the new package, to make sure there is no data loss
- Run some simple data insertion statements to make sure the cluster works well
- Restore business services
:::warning
TDengine doesn't guarantee any lower version is compatible with the data generated by a higher version, so it's never recommended to downgrade the version.
It is important to plan computing and storage resources if using TDengine to build an IoT, time-series or Big Data platform. How to plan the CPU, memory and disk resources required, will be described in this chapter.
## Memory Requirement of Server Side
## Server Memory Requirements
By default, the number of vgroups created for each database is the same as the number of CPU cores. This can be configured by the parameter `maxVgroupsPerDb`. Each vnode in a vgroup stores one replica. Each vnode consumes a fixed amount of memory, i.e. `blocks` \* `cache`. In addition, some memory is required for tag values associated with each table. A fixed amount of memory is required for each cluster. So, the memory required for each DB can be calculated using the formula below:
Each database creates a fixed number of vgroups. This number is 2 by default and can be configured with the `vgroups` parameter. The number of replicas can be controlled with the `replica` parameter. Each replica requires one vnode per vgroup. Altogether, the memory required by each database depends on the following configuration options:
For example, assuming the default value of `maxVgroupPerDB` is 64, the default value of `cache` is 16M, the default value of `blocks` is 6, there are 100,000 tables in a DB, the replica number is 1, total length of tag values is 256 bytes, the total memory required for this DB is: 64 \* 1 \* (16 \* 6 + 10) + 100000 \* (0.25 + 0.5) / 1000 = 6792M.
For more information, see [Database](../../taos-sql/database).
In the real operation of TDengine, we are more concerned about the memory used by each TDengine server process `taosd`.
The memory required by a database is therefore greater than or equal to:
1. "vnode_memory" of a `taosd` process is the memory used by all vnodes hosted by this `taosd` process. It can be roughly calculated by firstly adding up the total memory of all DBs whose memory usage can be derived according to the formula for Database Memory Size, mentioned above, then dividing by number of dnodes and multiplying the number of replicas.
2. "mnode_memory" of a `taosd` process is the memory consumed by a mnode. If there is one (and only one) mnode hosted in a `taosd` process, the memory consumed by "mnode" is "0.2KB \* the total number of tables in the cluster".
3. "query_memory" is the memory used when processing query requests. Each ongoing query consumes at least "0.2 KB \* total number of involved tables".
Please note that the above formulas can only be used to estimate the minimum memory requirement, instead of maximum memory usage. In a real production environment, it's better to reserve some redundance beyond the estimated minimum memory requirement. If memory is abundant, it's suggested to increase the value of parameter `blocks` to speed up data insertion and data query.
However, note that this requirement is spread over all dnodes in the cluster, not on a single physical machine. The physical servers that run dnodes meet the requirement together. If a cluster has multiple databases, the memory required increases accordingly. In complex environments where dnodes were added after initial deployment in response to increasing resource requirements, load may not be balanced among the original dnodes and newer dnodes. In this situation, the actual status of your dnodes is more important than theoretical calculations.
## Memory Requirement of Client Side
## Client Memory Requirements
For the client programs using TDengine client driver `taosc` to connect to the server side there is a memory requirement as well.
...
...
@@ -56,10 +48,10 @@ So, at least 3GB needs to be reserved for such a client.
The CPU resources required depend on two aspects:
- **Data Insertion** Each dnode of TDengine can process at least 10,000 insertion requests in one second, while each insertion request can have multiple rows. The difference in computing resource consumed, between inserting 1 row at a time, and inserting 10 rows at a time is very small. So, the more the number of rows that can be inserted one time, the higher the efficiency. Inserting in batch also imposes requirements on the client side which needs to cache rows to insert in batch once the number of cached rows reaches a threshold.
- **Data Insertion** Each dnode of TDengine can process at least 10,000 insertion requests in one second, while each insertion request can have multiple rows. The difference in computing resource consumed, between inserting 1 row at a time, and inserting 10 rows at a time is very small. So, the more the number of rows that can be inserted one time, the higher the efficiency. If each insert request contains more than 200 records, a single core can process more than 1 million records per second. Inserting in batch also imposes requirements on the client side which needs to cache rows to insert in batch once the number of cached rows reaches a threshold.
- **Data Query** High efficiency query is provided in TDengine, but it's hard to estimate the CPU resource required because the queries used in different use cases and the frequency of queries vary significantly. It can only be verified with the query statements, query frequency, data size to be queried, and other requirements provided by users.
In short, the CPU resource required for data insertion can be estimated but it's hard to do so for query use cases. In real operation, it's suggested to control CPU usage below 50%. If this threshold is exceeded, it's a reminder for system operator to add more nodes in the cluster to expand resources.
In short, the CPU resource required for data insertion can be estimated but it's hard to do so for query use cases. If possible, ensure that CPU usage remains below 50%. If this threshold is exceeded, it's a reminder for system operator to add more nodes in the cluster to expand resources.
## Disk Requirement
...
...
@@ -77,6 +69,6 @@ To increase performance, multiple disks can be setup for parallel data reading o
## Number of Hosts
A host can be either physical or virtual. The total memory, total CPU, total disk required can be estimated according to the formulae mentioned previously. Then, according to the system resources that a single host can provide, assuming all hosts have the same resources, the number of hosts can be derived easily.
A host can be either physical or virtual. The total memory, total CPU, total disk required can be estimated according to the formulae mentioned previously. If the number of data replicas is not 1, the required resources are multiplied by the number of replicas.
**Quick Estimation for CPU, Memory and Disk** Please refer to [Resource Estimate](https://www.taosdata.com/config/config.html).
Then, according to the system resources that a single host can provide, assuming all hosts have the same resources, the number of hosts can be derived easily.
@@ -11,22 +10,21 @@ When a data block is received by TDengine, the original data block is first writ
There are 2 configuration parameters related to WAL:
- walLevel：
- 0：wal is disabled
- 1：wal is enabled without fsync
- 2：wal is enabled with fsync
- fsync：This parameter is only valid when walLevel is set to 2. It specifies the interval, in milliseconds, of invoking fsync. If set to 0, it means fsync is invoked immediately once WAL is written.
- wal_level: Specifies the WAL level. 1 indicates that WAL is enabled but fsync is disabled. 2 indicates that WAL and fsync are both enabled. The default value is 1.
- wal_fsync_period: This parameter is only valid when wal_level is set to 2. It specifies the interval, in milliseconds, of invoking fsync. If set to 0, it means fsync is invoked immediately once WAL is written.
To achieve absolutely no data loss, walLevel should be set to 2 and fsync should be set to 1. There is a performance penalty to the data ingestion rate. However, if the concurrent data insertion threads on the client side can reach a big enough number, for example 50, the data ingestion performance will be still good enough. Our verification shows that the drop is only 30% when fsync is set to 3,000 milliseconds.
To achieve absolutely no data loss, set wal_level to 2 and wal_fsync_period to 0. There is a performance penalty to the data ingestion rate. However, if the concurrent data insertion threads on the client side can reach a big enough number, for example 50, the data ingestion performance will be still good enough. Our verification shows that the drop is only 30% when wal_fsync_period is set to 3000 milliseconds.
## Disaster Recovery
TDengine uses replication to provide high availability and disaster recovery capability.
TDengine uses replication to provide high availability.
A TDengine cluster is managed by mnode. To ensure the high availability of mnode, multiple replicas can be configured by the system parameter `numOfMnodes`. The data replication between mnode replicas is performed in a synchronous way to guarantee metadata consistency.
A TDengine cluster is managed by mnodes. You can configure up to three mnodes to ensure high availability. The data replication between mnode replicas is performed in a synchronous way to guarantee metadata consistency.
The number of replicas for time series data in TDengine is associated with each database. There can be many databases in a cluster and each database can be configured with a different number of replicas. When creating a database, parameter `replica` is used to configure the number of replications. To achieve high availability, `replica` needs to be higher than 1.
The number of replicas for time series data in TDengine is associated with each database. There can be many databases in a cluster and each database can be configured with a different number of replicas. When creating a database, the parameter `replica` is used to specify the number of replicas. To achieve high availability, set `replica` to 3.
The number of dnodes in a TDengine cluster must NOT be lower than the number of replicas for any database, otherwise it would fail when trying to create a table.
As long as the dnodes of a TDengine cluster are deployed on different physical machines and the replica number is higher than 1, high availability can be achieved without any other assistance. For disaster recovery, dnodes of a TDengine cluster should be deployed in geographically different data centers.
Alternatively, you can use taosX to synchronize the data from one TDengine cluster to another cluster in a remote location. For more information, see [taosX](../../reference/taosX).
1. If the port range to be diagnosed is being occupied by a `taosd` server process, please first stop `taosd.
2. On the server side, execute command `taos -n server -P <port> -l <pktlen>` to monitor the port range starting from the port specified by `-P` parameter with the role of "server".
3. On the client side, execute command `taos -n client -h <fqdnofserver> -P <port> -l <pktlen>` to send a testing package to the specified server and port.
-l <pktlen\>： The size of the testing package, in bytes. The value range is [11, 64,000] and default value is 1,000. Please note that the package length must be same in the above 2 commands executed on server side and client side respectively.
-l <pktlen\>： The size of the testing package, in bytes. The value range is [11, 64,000] and default value is 1,000.
Please note that the package length must be same in the above 2 commands executed on server side and client side respectively.
Output of the server side for the example is below:
```bash
# taos -n server -P 6000
12/21 14:50:13.522509 0x7f536f455200 UTL work as server, host:172.27.0.7 startPort:6000 endPort:6011 pkgLen:1000
12/21 14:50:13.522659 0x7f5352242700 UTL TCP server at port:6000 is listening
12/21 14:50:13.522727 0x7f5351240700 UTL TCP server at port:6001 is listening
...
...
# taos -n server -P 6030 -l 1000
network test server is initialized, port:6030
request is received, size:1000
request is received, size:1000
...
12/21 14:50:13.523954 0x7f5342fed700 UTL TCP server at port:6011 is listening
12/21 14:50:13.523989 0x7f53437ee700 UTL UDP server at port:6010 is listening
12/21 14:50:13.524019 0x7f53427ec700 UTL UDP server at port:6011 is listening
12/21 14:50:22.192849 0x7f5352242700 UTL TCP: read:1000 bytes from 172.27.0.8 at 6000
12/21 14:50:22.192993 0x7f5352242700 UTL TCP: write:1000 bytes to 172.27.0.8 at 6000
12/21 14:50:22.237082 0x7f5351a41700 UTL UDP: recv:1000 bytes from 172.27.0.8 at 6000
12/21 14:50:22.237203 0x7f5351a41700 UTL UDP: send:1000 bytes to 172.27.0.8 at 6000
12/21 14:50:22.237450 0x7f5351240700 UTL TCP: read:1000 bytes from 172.27.0.8 at 6001
12/21 14:50:22.237576 0x7f5351240700 UTL TCP: write:1000 bytes to 172.27.0.8 at 6001
12/21 14:50:22.281038 0x7f5350a3f700 UTL UDP: recv:1000 bytes from 172.27.0.8 at 6001
12/21 14:50:22.281141 0x7f5350a3f700 UTL UDP: send:1000 bytes to 172.27.0.8 at 6001
...
...
...
12/21 14:50:22.677443 0x7f5342fed700 UTL TCP: read:1000 bytes from 172.27.0.8 at 6011
12/21 14:50:22.677576 0x7f5342fed700 UTL TCP: write:1000 bytes to 172.27.0.8 at 6011
12/21 14:50:22.721144 0x7f53427ec700 UTL UDP: recv:1000 bytes from 172.27.0.8 at 6011
12/21 14:50:22.721261 0x7f53427ec700 UTL UDP: send:1000 bytes to 172.27.0.8 at 6011
request is received, size:1000
request is received, size:1000
```
Output of the client side for the example is below:
```bash
# taos -n client -h 172.27.0.7 -P 6000
12/21 14:50:22.192434 0x7fc95d859200 UTL work as client, host:172.27.0.7 startPort:6000 endPort:6011 pkgLen:1000
12/21 14:50:22.192472 0x7fc95d859200 UTL server ip:172.27.0.7 is resolved from host:172.27.0.7
12/21 14:50:22.236869 0x7fc95d859200 UTL successed to test TCP port:6000
12/21 14:50:22.237215 0x7fc95d859200 UTL successed to test UDP port:6000
taos -n client -h v3s2 -P 6030 -l 1000
network test client is initialized, the server is v3s2:6030
request is sent, size:1000
response is received, size:1000
request is sent, size:1000
response is received, size:1000
...
...
...
12/21 14:50:22.676891 0x7fc95d859200 UTL successed to test TCP port:6010
12/21 14:50:22.677240 0x7fc95d859200 UTL successed to test UDP port:6010
12/21 14:50:22.720893 0x7fc95d859200 UTL successed to test TCP port:6011
12/21 14:50:22.721274 0x7fc95d859200 UTL successed to test UDP port:6011
```
The output needs to be checked carefully for the system operator to find the root cause and resolve the problem.
## Startup Status and RPC Diagnostic
`taos -n startup -h <fqdnofserver>` can be used to check the startup status of a `taosd` process. This is a common task which should be performed by a system operator, especially in the case of a cluster, to determine whether `taosd` has been started successfully.
`taos -n rpc -h <fqdnofserver>` can be used to check whether the port of a started `taosd` can be accessed or not. If `taosd` process doesn't respond or is working abnormally, this command can be used to initiate a rpc communication with the specified fqdn to determine whether it's a network problem or whether `taosd` is abnormal.
## Sync and Arbitrator Diagnostic
request is sent, size:1000
response is received, size:1000
request is sent, size:1000
response is received, size:1000
```bash
taos -n sync -P 6040 -h <fqdn of server>
taos -n sync -P 6042 -h <fqdn of server>
total succ: 100/100 cost: 16.23 ms speed: 5.87 MB/s
```
The above commands can be executed in a Linux shell to check whether the port for sync is working well and whether the sync module on the server side is working well. Additionally, `-P 6042` is used to check whether the arbitrator is configured properly and is working well.
From version 2.2.0.0 onwards, the above command can be executed in a Linux shell to test network speed. The command sends uncompressed packages to a running `taosd` server process or a simulated server process started by `taos -n server` to test the network speed. Parameters can be used when testing network speed are as below:
-n：When set to "speed", it means testing network speed.
-h：The FQDN or IP of the server process to be connected to; if not set, the FQDN configured in `taos.cfg` is used.
-P：The port of the server process to connect to, the default value is 6030.
-N：The number of packages that will be sent in the test, range is [1,10000], default value is 100.
-l：The size of each package in bytes, range is [1024, 1024 \* 1024 \* 1024], default value is 1024.
-S：The type of network packages to send, can be either TCP or UDP, default value is TCP.
## FQDN Resolution Diagnostic
`taos -n fqdn -h <fqdnofserver>`
From version 2.2.0.0 onward, the above command can be executed in a Linux shell to test the resolution speed of FQDN. It can be used to try to resolve a FQDN to an IP address and record the time spent in this process. The parameters that can be used for this purpose are as below:
-n：When set to "fqdn", it means testing the speed of resolving FQDN.
-h：The FQDN to be resolved. If not set, the `FQDN` parameter in `taos.cfg` is used by default.
The output needs to be checked carefully for the system operator to find the root cause and resolve the problem.
## Server Log
The parameter `debugFlag` is used to control the log level of the `taosd` server process. The default value is 131. For debugging and tracing, it needs to be set to either 135 or 143 respectively.
Once this parameter is set to 135 or 143, the log file grows very quickly especially when there is a huge volume of data insertion and data query requests. If all the logs are stored together, some important information may be missed very easily and so on the server side, important information is stored in a different place from other logs.
The parameter `debugFlag` is used to control the log level of the `taosd` server process. The default value is 131. For debugging and tracing, it needs to be set to either 135 or 143 respectively.
- The log at level of INFO, WARNING and ERROR is stored in `taosinfo` so that it is easy to find important information
- The log at level of DEBUG (135) and TRACE (143) and other information not handled by `taosinfo` are stored in `taosdlog`
Once this parameter is set to 135 or 143, the log file grows very quickly especially when there is a huge volume of data insertion and data query requests. Ensure that the disk drive on which logs are stored has sufficient space.
## Client Log
An independent log file, named as "taoslog+<seq num\>" is generated for each client program, i.e. a client process. The default value of `debugFlag` is also 131 and only logs at level of INFO/ERROR/WARNING are recorded. As stated above, for debugging and tracing, it needs to be changed to 135 or 143 respectively, so that logs at DEBUG or TRACE level can be recorded.
An independent log file, named as "taoslog+<seq num\>" is generated for each client program, i.e. a client process. The parameter `debugFlag` is used to control the log level. The default value is 131. For debugging and tracing, it needs to be set to either 135 or 143 respectively.
The default value of `debugFlag` is also 131 and only logs at level of INFO/ERROR/WARNING are recorded. As stated above, for debugging and tracing, it needs to be changed to 135 or 143 respectively, so that logs at DEBUG or TRACE level can be recorded.
The maximum length of a single log file is controlled by parameter `numOfLogLines` and only 2 log files are kept for each `taosd` server process.
Log files are written in an async way to minimize the workload on disk, but the trade off for performance is that a few log lines may be lost in some extreme conditions.
Log files are written in an async way to minimize the workload on disk, but the trade off for performance is that a few log lines may be lost in some extreme conditions. You can configure asynclog to 0 when needed for troubleshooting purposes to ensure that no log information is lost.
In IoT applications, data is collected for many purposes such as intelligent control, business analysis, device monitoring and so on. Due to changes in business or functional requirements or changes in device hardware, the application logic and even the data collected may change. To provide the flexibility needed in such cases and in a rapidly changing IoT landscape, TDengine provides a series of interfaces for the schemaless writing method. These interfaces eliminate the need to create super tables and subtables in advance by automatically creating the storage structure corresponding to the data as the data is written to the interface. When necessary, schemaless writing will automatically add the required columns to ensure that the data written by the user is stored correctly.
In IoT applications, data is collected for many purposes such as intelligent control, business analysis, device monitoring and so on. Due to changes in business or functional requirements or changes in device hardware, the application logic and even the data collected may change. Schemaless writing automatically creates storage structures for your data as it is being written to TDengine, so that you do not need to create supertables in advance. When necessary, schemaless writing
will automatically add the required columns to ensure that the data written by the user is stored correctly.
The schemaless writing method creates super tables and their corresponding subtables. These are completely indistinguishable from the super tables and subtables created directly via SQL. You can write data directly to them via SQL statements. Note that the names of tables created by schemaless writing are based on fixed mapping rules for tag values, so they are not explicitly ideographic and they lack readability.
...
...
@@ -19,12 +20,12 @@ With the following formatting conventions, schemaless writing uses a single stri
measurement,tag_setfield_settimestamp
```
where:
where:
- measurement will be used as the data table name. It will be separated from tag_set by a comma.
-tag_set will be used as tag data in the format `<tag_key>=<tag_value>,<tag_key>=<tag_value>`, i.e. multiple tags' data can be separated by a comma. It is separated from field_set by space.
-field_set will be used as normal column data in the format of `<field_key>=<field_value>,<field_key>=<field_value>`, again using a comma to separate multiple normal columns of data. It is separated from the timestamp by a space.
-The timestamp is the primary key corresponding to the data in this row.
-`tag_set` will be used as tags, with format like `<tag_key>=<tag_value>,<tag_key>=<tag_value>` Enter a space between `tag_set` and `field_set`.
-`field_set`will be used as data columns, with format like `<field_key>=<field_value>,<field_key>=<field_value>` Enter a space between `field_set` and `timestamp`.
-`timestamp` is the primary key timestamp corresponding to this row of data
All data in tag_set is automatically converted to the NCHAR data type and does not require double quotes (").
...
...
@@ -37,16 +38,18 @@ In the schemaless writing data line protocol, each data item in the field_set ne
-`t`, `T`, `true`, `True`, `TRUE`, `f`, `F`, `false`, and `False` will be handled directly as BOOL types.
For example, the following data rows indicate that the t1 label is "3" (NCHAR), the t2 label is "4" (NCHAR), and the t3 label is "t3" to the super table named `st` labeled "t3" (NCHAR), write c1 column as 3 (BIGINT), c2 column as false (BOOL), c3 column is "passit" (BINARY), c4 column is 4 (DOUBLE), and the primary key timestamp is 1626006833639000000 in one row.
For example, the following data rows indicate that the t1 label is "3" (NCHAR), the t2 label is "4" (NCHAR), and the t3 label
is "t3" to the super table named `st` labeled "t3" (NCHAR), write c1 column as 3 (BIGINT), c2 column as false (BOOL), c3 column
is "passit" (BINARY), c4 column is 4 (DOUBLE), and the primary key timestamp is 1626006833639000000 in one row.
@@ -65,18 +68,22 @@ Schemaless writes process row data according to the following principles.
```
Note that tag_key1, tag_key2 are not the original order of the tags entered by the user but the result of using the tag names in ascending order of the strings. Therefore, tag_key1 is not the first tag entered in the line protocol.
The string's MD5 hash value "md5_val" is calculated after the ranking is completed. The calculation result is then combined with the string to generate the table name: "t_md5_val". "t*" is a fixed prefix that every table generated by this mapping relationship has.
The string's MD5 hash value "md5_val" is calculated after the ranking is completed. The calculation result is then combined with the string to generate the table name: "t_md5_val". "t_" is a fixed prefix that every table generated by this mapping relationship has.
You can configure smlChildTableName to specify table names, for example, `smlChildTableName=tname`. You can insert `st,tname=cpul,t1=4 c1=3 1626006833639000000` and the cpu1 table will be automatically created. Note that if multiple rows have the same tname but different tag_set values, the tag_set of the first row is used to create the table and the others are ignored.
2. If the super table obtained by parsing the line protocol does not exist, this super table is created.
If the subtable obtained by the parse line protocol does not exist, Schemaless creates the sub-table according to the subtable name determined in steps 1 or 2.
3.If the subtable obtained by the parse line protocol does not exist, Schemaless creates the sub-table according to the subtable name determined in steps 1 or 2.
4. If the specified tag or regular column in the data row does not exist, the corresponding tag or regular column is added to the super table (only incremental).
5. If there are some tag columns or regular columns in the super table that are not specified to take values in a data row, then the values of these columns are set to NULL.
5. If there are some tag columns or regular columns in the super table that are not specified to take values in a data row, then the values of these columns are set to
NULL.
6. For BINARY or NCHAR columns, if the length of the value provided in a data row exceeds the column type limit, the maximum length of characters allowed to be stored in the column is automatically increased (only incremented and not decremented) to ensure complete preservation of the data.
7. Errors encountered throughout the processing will interrupt the writing process and return an error code.
8. In order to improve the efficiency of writing, it is assumed by default that the order of the fields in the same Super is the same (the first data contains all fields, and the following data is in this order). If the order is different, the parameter smlDataFormat needs to be configured to be false. Otherwise, the data is written in the same order, and the data in the library will be abnormal.
8. It is assumed that the order of field_set in a supertable is consistent, meaning that the first record contains all fields and subsequent records store fields in the same order. If the order is not consistent, set smlDataFormat to false. Otherwise, data will be written out of order and a database error will occur.
:::tip
All processing logic of schemaless will still follow TDengine's underlying restrictions on data structures, such as the total length of each row of data cannot exceed 16k bytes. See [TAOS SQL Boundary Limits](/taos-sql/limit) for specific constraints in this area.
All processing logic of schemaless will still follow TDengine's underlying restrictions on data structures, such as the total length of each row of data cannot exceed
16KB. See [TAOS SQL Boundary Limits](/taos-sql/limit) for specific constraints in this area.
:::
## Time resolution recognition
...
...
@@ -85,75 +92,74 @@ Three specified modes are supported in the schemaless writing process, as follow
In the SML_LINE_PROTOCOL parsing mode, the user is required to specify the time resolution of the input timestamp. The available time resolutions are shown in the following table.
In InfluxDB line protocol mode, you must specify the precision of the input timestamp. Valid precisions are described in the following table.
In SML_TELNET_PROTOCOL and SML_JSON_PROTOCOL modes, the time precision is determined based on the length of the timestamp (in the same way as the OpenTSDB standard operation), and the user-specified time resolution is ignored at this point.
| 1 | TSDB_SML_TIMESTAMP_NOT_CONFIGURED | Not defined (invalid) |
In OpenTSDB file and JSON protocol modes, the precision of the timestamp is determined from its length in the standard OpenTSDB manner. User input is ignored.
This section describes how data for line protocols are mapped to data with a schema. The data measurement in each line protocol is mapped as follows:
- The tag name in tag_set is the name of the tag in the data schema
- The name in field_set is the column's name.
## Data Model Mapping
The following data is used as an example to illustrate the mapping rules.
This section describes how data in line protocol is mapped to a schema. The data measurement in each line is mapped to a
supertable name. The tag name in tag_set is the tag name in the schema, and the name in field_set is the column name in the schema. The following example shows how data is mapped:
The row data mapping generates a super table: `st`, which contains three labels of type NCHAR: t1, t2, t3. Five data columns are ts (timestamp), c1 (bigint), c3 (binary), c2 (bool), c4 (bigint). The mapping becomes the following SQL statement.
This row is mapped to a supertable: `st` contains three NCHAR tags: t1, t2, and t3. Five columns are created: ts (timestamp), c1 (bigint), c3 (binary), c2 (bool), and c4 (bigint). The following SQL statement is generated:
This section describes the impact on the data schema for different line protocol data writing cases.
This section describes the impact on the schema caused by different data being written.
When writing to an explicitly identified field type using the line protocol, subsequent changes to the field's type definition will result in an explicit data schema error, i.e., will trigger a write API report error. As shown below, the
If you use line protocol to write to a specific tag field and then later change the field type, a schema error will ocur. This triggers an error on the write API. This is shown as follows:
The data type mapping in the first row defines column c4 as DOUBLE, but the data in the second row is declared as BIGINT by the numeric suffix, which triggers a parsing error with schemaless writing.
The first row defines c4 as a double. However, in the second row, the suffix indicates that the value of c4 is a bigint. This causes schemaless writing to throw an error.
If the line protocol before the column declares the data column as BINARY, the subsequent one requires a longer binary length, which triggers a super table schema change.
An error also occurs if data input into a binary column exceeds the defined length of the column.
The first line of the line protocol parsing will declare column c5 is a BINARY(4) field. The second line data write will parse column c5 as a BINARY column. But in the second line, c5's width is 6 so you need to increase the width of the BINARY field to be able to accommodate the new string.
The first row defines c5 as a binary(4). but the second row writes 6 bytes to it. This means that the length of the binary column must be expanded to contain the data.
The second line of data has an additional column c6 of type BINARY(6) compared to the first row. Then a column c6 of type BINARY(6) is automatically added at this point.
The preceding data includes a new entry, c6, with type binary(6). When this occurs, a new column c6 with type binary(6) is added automatically.
## Write integrity
## Write Integrity
TDengine provides idempotency guarantees for data writing, i.e., you can repeatedly call the API to write data with errors. However, it does not give atomicity guarantees for writing multiple rows of data. During the process of writing numerous rows of data in one batch, some data will be written successfully, and some data will fail.
TDengine guarantees the idempotency of data writes. This means that you can repeatedly call the API to perform write operations with bad data. However, TDengine does not guarantee the atomicity of multi-row writes. In a multi-row write, some data may be written successfully and other data unsuccessfully.
## Error code
##: Error Codes
If it is an error in the data itself during the schemaless writing process, the application will get `TSDB_CODE_TSC_LINE_SYNTAX_ERROR` error message, which indicates that the error occurred in writing. The other error codes are consistent with the TDengine and can be obtained via the `taos_errstr()` to get the specific cause of the error.
The TSDB_CODE_TSC_LINE_SYNTAX_ERROR indicates an error in the schemaless writing component.
This error occurs when writing text. For other errors, schemaless writing uses the standard TDengine error codes
TDengine can be quickly integrated with the open-source data visualization system [Grafana](https://www.grafana.com/) to build a data monitoring and alerting system. The whole process does not require any code development. And you can visualize the contents of the data tables in TDengine on a dashboard.
You can learn more about using the TDengine plugin on [GitHub](https://github.com/taosdata/grafanaplugin/blob/master/README.md).
TDengine can be quickly integrated with the open-source data visualization system [Grafana](https://www.grafana.com/) to build a data monitoring and alerting system. The whole process does not require any code development. And you can visualize the contents of the data tables in TDengine on a dashboard. You can learn more about using the TDengine plugin on [GitHub](https://github.com/taosdata/grafanaplugin/blob/master/README.md).
## Prerequisites
...
...
@@ -65,7 +63,6 @@ Restart Grafana service and open Grafana in web-browser, usually <http://localho
Save the script and type `./install.sh --help` for the full usage of the script.
Follow the installation steps in [Grafana](https://grafana.com/grafana/plugins/tdengine-datasource/?tab=installation) with the [``grafana-cli`` command-line tool](https://grafana.com/docs/grafana/latest/administration/cli/) for plugin installation.
Alternatively, you can manually download the .zip file from [GitHub](https://github.com/taosdata/grafanaplugin/releases/tag/latest) or [Grafana](https://grafana.com/grafana/plugins/tdengine-datasource/?tab=installation) and unpack it into your grafana plugins directory.
You can also download zip files from [GitHub](https://github.com/taosdata/grafanaplugin/releases/tag/latest) or [Grafana](https://grafana.com/grafana/plugins/tdengine-datasource/?tab=installation) and install manually. The commands are as follows:
```bash
GF_VERSION=3.2.2
...
...
@@ -131,7 +128,7 @@ docker run -d \
grafana/grafana
```
You can setup a zero-configuration stack for TDengine + Grafana by [docker-compose](https://docs.docker.com/compose/) and [Grafana provisioning](https://grafana.com/docs/grafana/latest/administration/provisioning/) file：
You can setup a zero-configuration stack for TDengine + Grafana by [docker-compose](https://docs.docker.com/compose/) and [Grafana provisioning](https://grafana.com/docs/grafana/latest/administration/provisioning/) file:
1. Save the provisioning configuration file to `tdengine.yml`.
...
...
@@ -196,7 +193,7 @@ Go back to the main interface to create a dashboard and click Add Query to enter
As shown above, select the `TDengine` data source in the `Query` and enter the corresponding SQL in the query box below for query.
- INPUT SQL: enter the statement to be queried (the result set of the SQL statement should be two columns and multiple rows), for example: `select avg(mem_system) from log.dn where ts >= $from and ts < $to interval($interval)`, where, from, to and interval are built-in variables of the TDengine plugin, indicating the range and time interval of queries fetched from the Grafana plugin panel. In addition to the built-in variables, custom template variables are also supported.
- INPUT SQL: Enter the desired query (the results being two columns and multiple rows), such as `select _wstart, avg(mem_system) from log.dnodes_info where ts >= $from and ts < $to interval($interval)`. In this statement, $from, $to, and $interval are variables that Grafana replaces with the query time range and interval. In addition to the built-in variables, custom template variables are also supported.
- ALIAS BY: This allows you to set the current query alias.
- GENERATE SQL: Clicking this button will automatically replace the corresponding variables and generate the final executed statement.
...
...
@@ -208,7 +205,11 @@ Follow the default prompt to query the average system memory usage for the speci
### Importing the Dashboard
You can install TDinsight dashboard in data source configuration page (like `http://localhost:3000/datasources/edit/1/dashboards`) as a monitoring visualization tool for TDengine cluster. The dashboard is published in Grafana as [Dashboard 15167 - TDinsight](https://grafana.com/grafana/dashboards/15167). Check the [TDinsight User Manual](/reference/tdinsight/) for the details.
You can install TDinsight dashboard in data source configuration page (like `http://localhost:3000/datasources/edit/1/dashboards`) as a monitoring visualization tool for TDengine cluster. Ensure that you use TDinsight for 3.x.
A dashboard for TDengine 2.x has been published on Grafana: [Dashboard 15167 - TDinsight](https://grafana.com/grafana/dashboards/15167)) 。 Check the [TDinsight User Manual](/reference/tdinsight/) for the details.
For more dashboards using TDengine data source, [search here in Grafana](https://grafana.com/grafana/dashboards/?dataSource=tdengine-datasource). Here is a sub list:
[HiveMQ](https://www.hivemq.com/) is an MQTT broker that provides community and enterprise editions. HiveMQ is mainly for enterprise emerging machine-to-machine M2M communication and internal transport, meeting scalability, ease of management, and security features. HiveMQ provides an open-source plug-in development kit. MQTT data can be saved to TDengine via TDengine extension for HiveMQ. Please refer to the [HiveMQ extension - TDengine documentation](https://github.com/huskar-t/hivemq-tdengine-extension/blob/b62a26ecc164a310104df57691691b237e091c89/README_EN.md) for details on how to use it.
\ No newline at end of file
[HiveMQ](https://www.hivemq.com/) is an MQTT broker that provides community and enterprise editions. HiveMQ is mainly for enterprise emerging machine-to-machine M2M communication and internal transport, meeting scalability, ease of management, and security features. HiveMQ provides an open-source plug-in development kit. MQTT data can be saved to TDengine via TDengine extension for HiveMQ. For more information, see [HiveMQ TDengine Extension](https://github.com/huskar-t/hivemq-tdengine-extension/blob/b62a26ecc164a310104df57691691b237e091c89/README_EN.md).
If the tips in FAQ don't help much, please submit an issue on [GitHub](https://github.com/taosdata/TDengine) to describe your problem. In your description please include the TDengine version, hardware and OS information, the steps to reproduce the problem and any other relevant information. It would be very helpful if you can package the contents in `/var/log/taos` and `/etc/taos` and upload. These two are the default directories used by TDengine. If you have changed the default directories in your configuration, please package the files in your configured directories. We recommended setting `debugFlag` to 135 in `taos.cfg`, restarting `taosd`, then reproducing the problem and collecting the logs. If you don't want to restart, an alternative way of setting `debugFlag` is executing `alter dnode <dnode_id> debugFlag 135` command in TDengine CLI `taos`. During normal running, however, please make sure `debugFlag` is set to 131.
If your issue could not be resolved by reviewing this documentation, you can submit your issue on GitHub and receive support from the TDengine Team. When you submit an issue, attach the following directories from your TDengine deployment:
## Frequently Asked Questions
1. The directory containing TDengine logs (`/var/log/taos` by default)
2. The directory containing TDengine configuration files (`/etc/taos` by default)
### 1. How to upgrade to TDengine 2.0 from older version?
In your GitHub issue, provide the version of TDengine and the operating system and environment for your deployment, the operations that you performed when the issue occurred, and the time of occurrence and affected tables.
version 2.x is not compatible with version 1.x. With regard to the configuration and data files, please perform the following steps before upgrading. Please follow data integrity, security, backup and other relevant SOPs, best practices before removing/deleting any data.
To obtain more debugging information, open `taos.cfg` and set the `debugFlag` parameter to `135`. Then restart TDengine Server and reproduce the issue. The debug-level logs generated help the TDengine Team to resolve your issue. If it is not possible to restart TDengine Server, you can run the following command in the TDengine CLI to set the debug flag:
3. Delete data files if the data doesn't need to be kept: `sudo rm -rf /var/lib/taos/`
4. Install latest 2.x version
5. If the data needs to be kept and migrated to newer version, please contact professional service at TDengine for assistance.
```
alter dnode <dnode_id> 'debugFlag' '135';
```
### 2. How to handle "Unable to establish connection"？
You can run the `SHOW DNODES` command to determine the dnode ID.
When the client is unable to connect to the server, you can try the following ways to troubleshoot and resolve the problem.
When debugging information is no longer needed, set `debugFlag` to 131.
1. Check the network
## Frequently Asked Questions
- Check if the hosts where the client and server are running are accessible to each other, for example by `ping` command.
- Check if the TCP/UDP on port 6030-6042 are open for access if firewall is enabled. If possible, disable the firewall for diagnostics, but please ensure that you are following security and other relevant protocols.
- Check if the FQDN and serverPort are configured correctly in `taos.cfg` used by the server side.
- Check if the `firstEp` is set properly in the `taos.cfg` used by the client side.
### 1. What are the best practices for upgrading a previous version of TDengine to version 3.0?
2. Make sure the client version and server version are same.
TDengine 3.0 is not compatible with the configuration and data files from previous versions. Before upgrading, perform the following steps:
3. On server side, check the running status of `taosd` by executing `systemctl status taosd` . If your server is started using another way instead of `systemctl`, use the proper method to check whether the server process is running normally.
1. Run `sudo rm -rf /etc/taos/taos.cfg` to delete your configuration file.
2. Run `sudo rm -rf /var/log/taos/` to delete your log files.
3. Run `sudo rm -rf /var/lib/taos/` to delete your data files.
4. Install TDengine 3.0.
5. For assistance in migrating data to TDengine 3.0, contact [TDengine Support](https://tdengine.com/support).
4. If using connector of Python, Java, Go, Rust, C#, node.JS on Linux to connect to the server, please make sure `libtaos.so` is in directory `/usr/local/taos/driver` and `/usr/local/taos/driver` is in system lib search environment variable `LD_LIBRARY_PATH`.
### 4. How can I resolve the "Unable to establish connection" error?
5. If using connector on Windows, please make sure `C:\TDengine\driver\taos.dll` is in your system lib search path. We recommend putting `taos.dll` under `C:\Windows\System32`.
This error indicates that the client could not connect to the server. Perform the following troubleshooting steps:
6. Some advanced network diagnostics tools
1. Check the network.
- On Linux system tool `nc` can be used to check whether the TCP/UDP can be accessible on a specified port
Check whether a UDP port is open: `nc -vuz {hostIP} {port} `
Check whether a TCP port on server side is open: `nc -l {port}`
Check whether a TCP port on client side is open: `nc {hostIP} {port}`
- For machines deployed in the cloud, verify that your security group can access ports 6030 and 6031 (TCP and UDP).
- For virtual machines deployed locally, verify that the hosts where the client and server are running are accessible to each other. Do not use localhost as the hostname.
- For machines deployed on a corporate network, verify that your NAT configuration allows the server to respond to the client.
- On Windows system `Test-NetConnection -ComputerName {fqdn} -Port {port}` on PowerShell can be used to check whether the port on server side is open for access.
2. Verify that the client and server are running the same version of TDengine.
7. TDengine CLI `taos` can also be used to check network, please refer to [TDengine CLI](/reference/taos-shell).
3. On the server, run `systemctl status taosd` to verify that taosd is running normally. If taosd is stopped, run `systemctl start taosd`.
### 3. How to handle "Unexpected generic error in RPC" or "Unable to resolve FQDN" ?
4. Verify that the client is configured with the correct FQDN for the server.
This error is caused because the FQDN can't be resolved. Please try following ways:
5. If the server cannot be reached with the `ping` command, verify that network and DNS or hosts file settings are correct. For a TDengine cluster, the client must be able to ping the FQDN of every node in the cluster.
1. Check whether the FQDN is configured properly on the server side
2. If DSN server is configured in the network, please check whether it works; otherwise, check `/etc/hosts` to see whether the FQDN is configured with correct IP
3. If the network configuration on the server side is OK, try to ping the server from the client side.
4. If TDengine has been used before with an old hostname then the hostname has been changed, please check `/var/lib/taos/taos/dnode/dnodeEps.json`. Before setting up a new TDengine cluster, it's better to cleanup the directories configured.
6. Verify that your firewall settings allow all hosts in the cluster to communicate on ports 6030 and 6041 (TCP and UDP). You can run `ufw status` (Ubuntu) or `firewall-cmd --list-port` (CentOS) to check the configuration.
### 4. "Invalid SQL" is returned even though the Syntax is correct
7. If you are using the Python, Java, Go, Rust, C#, or Node.js connector on Linux to connect to the server, verify that `libtaos.so` is in the `/usr/local/taos/driver` directory and `/usr/local/taos/driver` is in the `LD_LIBRARY_PATH` environment variable.
"Invalid SQL" is returned when the length of SQL statement exceeds maximum allowed length or the syntax is not correct.
8. If you are using Windows, verify that `C:\TDengine\driver\taos.dll` is in the `PATH` environment variable. If possible, move `taos.dll` to the `C:\Windows\System32` directory.
### 5. Whether validation queries are supported?
9. On Linux systems, you can use the `nc` tool to check whether a port is accessible:
- To check whether a UDP port is open, run `nc -vuz {hostIP} {port}`.
- To check whether a TCP port on the server side is open, run `nc -l {port}`.
- To check whether a TCP port on client side is open, run `nc {hostIP} {port}`.
It's suggested to use a builtin database named as `log` to monitor.
10. On Windows systems, you can run `Test-NetConnection -ComputerName {fqdn} -Port {port}` in PowerShell to check whether a port on the server side is accessible.
<aclass="anchor"id="update"></a>
11. You can also use the TDengine CLI to diagnose network issues. For more information, see [Problem Diagnostics](https://docs.tdengine.com/operation/diagnose/).
### 6. Can I delete a record?
### 5. How can I resolve the "Unable to resolve FQDN" error?
From version 2.6.0.0 Enterprise version, deleting data can be supported.
Clients and dnodes must be able to resolve the FQDN of each required node. You can confirm your configuration as follows:
### 7. How to create a table of over 1024 columns?
1. Verify that the FQDN is configured properly on the server.
2. If your network has a DNS server, verify that it is operational.
3. If your network does not have a DNS server, verify that the FQDNs in the `hosts` file are correct.
4. On the client, use the `ping` command to test your connection to the server. If you cannot ping an FQDN, TDengine cannot reach it.
5. If TDengine has been previously installed and the `hostname` was modified, open `dnode.json` in the `data` folder and verify that the endpoint configuration is correct. The default location of the dnode file is `/var/lib/taos/dnode`. Ensure that you clean up previous installations before reinstalling TDengine.
6. Confirm whether FQDNs are preconfigured in `/etc/hosts` and `/etc/hostname`.
From version 2.1.7.0, at most 4096 columns can be defined for a table.
### 6. What is the most effective way to write data to TDengine?
### 8. How to improve the efficiency of inserting data?
Writing data in batches provides higher efficiency in most situations. You can insert one or more data records into one or more tables in a single SQL statement.
Inserting data in batch is a good practice. Single SQL statement can insert data for one or multiple tables in batch.
### 9. Why are table names not fully displayed?
### 9. JDBC Error： the executed SQL is not a DML or a DDL？
The number of columns in the TDengine CLI terminal display is limited. This can cause table names to be cut off, and if you use an incomplete name in a statement, the "Table does not exist" error will occur. You can increase the display size with the `maxBinaryDisplayWidth` parameter or the SQL statement `set max_binary_display_width`. You can also append `\G` to your SQL statement to bypass this limitation.
Please upgrade to latest JDBC driver, for details please refer to [Java Connector](/reference/connector/java)
### 10. How can I migrate data?
### 10. Failed to connect with error "invalid timestamp"
In TDengine, the `hostname` uniquely identifies a machine. When you move data files to a new machine, you must configure the new machine to have the same `host name` as the original machine.
The most common reason is that the time setting is not aligned on the client side and the server side. On Linux system, please use `ntpdate` command. On Windows system, please enable automatic sync in system time setting.
:::note
### 11. Table name is not shown in full
The data structure of previous versions of TDengine is not compatible with version 3.0. To migrate from TDengine 1.x or 2.x to 3.0, you must export data from your older deployment and import it back into TDengine 3.0.
There is a display width setting in TDengine CLI `taos`. It can be controlled by configuration parameter `maxBinaryDisplayWidth`, or can be set using SQL command `set max_binary_display_width`. A more convenient way is to append `\G` in a SQL command to bypass this limitation.
:::
### 12. How to change log level temporarily?
### 11. How can I temporary change the log level from the TDengine Client?
Below SQL command can be used to adjust log level temporarily
To change the log level for debugging purposes, you can use the following command:
```sql
ALTERLOCALflag_nameflag_value;
ALTERLOCALlocal_option
local_option:{
'resetLog'
|'rpcDebugFlag'value
|'tmrDebugFlag'value
|'cDebugFlag'value
|'uDebugFlag'value
|'debugFlag'value
}
```
- flag_name can be: debugFlag，cDebugFlag，tmrDebugFlag，uDebugFlag，rpcDebugFlag
Use `resetlog` to remove all logs generated on the local client. Use the other parameters to specify a log level for a specific component.
### 13. What to do if go compilation fails?
For each parameter, you can set the value to `131` (error and warning), `135` (error, warning, and debug), or `143` (error, warning, debug, and trace).
From version 2.3.0.0, a new component named `taosAdapter` is introduced. Its' developed in Go. If you want to compile from source code and meet go compilation problems, try to do below steps to resolve Go environment problems.
### Why do TDengine components written in Go fail to compile?
```sh
go env-wGO111MODULE=on
go env-wGOPROXY=https://goproxy.cn,direct
```
TDengine includes taosAdapter, an independent component written in Go. This component provides the REST API as well as data access for other products such as Prometheus and Telegraf.
When using the develop branch, you must run `git submodule update --init --recursive` to download the taosAdapter repository and then compile it.
TDengine Go components require Go version 1.14 or later.
### 13. How can I query the storage space being used by my data?
The TDengine data files are stored in `/var/lib/taos` by default. Log files are stored in `/var/log/taos`.
To see how much space your data files occupy, run `du -sh /var/lib/taos/vnode --exclude='wal'`. This excludes the write-ahead log (WAL) because its size is relatively fixed while writes are occurring, and it is written to disk and cleared when you shut down TDengine.
If you want to see how much space is occupied by a single database, first determine which vgroup is storing the database by running `show vgroups`. Then check `/var/lib/taos/vnode` for the files associated with the vgroup ID.
### 15. How is timezone information processed for timestamps?
TDengine uses the timezone of the client for timestamps. The server timezone does not affect timestamps. The client converts Unix timestamps in SQL statements to UTC before sending them to the server. When you query data on the server, it provides timestamps in UTC to the client, which converts them to its local time.
Timestamps are processed as follows:
1. The client uses its system timezone unless it has been configured otherwise.
2. A timezone configured in `taos.cfg` takes precedence over the system timezone.
3. A timezone explicitly specified when establishing a connection to TDengine through a connector takes precedence over `taos.cfg` and the system timezone. For example, the Java connector allows you to specify a timezone in the JDBC URL.
4. If you use an RFC 3339 timestamp (2013-04-12T15:52:01.123+08:00), or an ISO 8601 timestamp (2013-04-12T15:52:01.123+0800), the timezone specified in the timestamp is used instead of the timestamps configured using any other method.
### 16. Which network ports are required by TDengine?
See [serverPort](https://docs.tdengine.com/reference/config/#serverport) in Configuration Parameters.
Note that ports are specified using 6030 as the default first port. If you change this port, all other ports change as well.
### 17. Why do applications such as Grafana fail to connect to TDengine over the REST API?
In TDengine, the REST API is provided by taosAdapter. Ensure that taosAdapter is running before you connect an application to TDengine over the REST API. You can run `systemctl start taosadapter` to start the service.
Note that the log path for taosAdapter must be configured separately. The default path is `/var/log/taos`. You can choose one of eight log levels. The default is `info`. You can set the log level to `panic` to disable log output. You can modify the taosAdapter configuration file to change these settings. The default location is `/etc/taos/taosadapter.toml`.
For more information, see [taosAdapter](https://docs.tdengine.com/reference/taosadapter/).
### 18. How can I resolve out-of-memory (OOM) errors?
OOM errors are thrown by the operating system when its memory, including swap, becomes insufficient and it needs to terminate processes to remain operational. Most OOM errors in TDengine occur for one of the following reasons: free memory is less than the value of `vm.min_free_kbytes` or free memory is less than the size of the request. If TDengine occupies reserved memory, an OOM error can occur even when free memory is sufficient.
TDengine preallocates memory to each vnode. The number of vnodes per database is determined by the `vgroups` parameter, and the amount of memory per vnode is determined by the `buffer` parameter. To prevent OOM errors from occurring, ensure that you prepare sufficient memory on your hosts to support the number of vnodes that your deployment requires. Configure an appropriately sized swap space. If you continue to receive OOM errors, your SQL statements may be querying too much data for your system. TDengine Enterprise Edition includes optimized memory management that increases stability for enterprise customers.
