docs: update taoskeeper docs for monitor and monitorFqdn (#19955)

* docs: update taoskeeper docs for monitor and monitorFqdn

* fix docs

docs/en/14-reference/12-config/index.md

@@ -106,7 +106,7 @@ The parameters described in this document by the effect that they have on the sy
 | Applicable | Server only                                           |
 | Meaning       | The switch for monitoring inside server. The main object of monitoring is to collect information about load on physical nodes, including CPU usage, memory usage, disk usage, and network bandwidth. Monitoring information is sent over HTTP to the taosKeeper service specified by `monitorFqdn` and `monitorProt`.
 | Value Range   | 0: monitoring disabled, 1: monitoring enabled                                                                                                                                                                |
-| Default   | 1                                                                                                                                                                                                  |
+| Default   | 0                                                                                                                                                                                                  |
 
 ### monitorFqdn
 

docs/en/14-reference/14-taosKeeper.md

@@ -24,7 +24,14 @@ You can compile taosKeeper separately and install it. Please refer to the [taosK
 
 taosKeeper needs to be executed on the terminal of the operating system, it supports three configuration methods: [Command-line arguments](#command-line-arguments-in-detail), [environment variable](#environment-variable-in-detail) and [configuration file](#configuration-file-parameters-in-detail). The precedence of those is Command-line, environment variable and configuration file.
 
-**Make sure that the TDengine cluster is running correctly before running taosKeeper. ** Ensure that the monitoring service in TDengine has been started. For more information, see [TDengine Monitoring Configuration](../config/#monitoring).
+**Make sure that the TDengine cluster is running correctly before running taosKeeper.** Ensure that the monitoring service in TDengine has been started. At least the values of `monitor` and `monitorFqdn` need to be set in `taos.cfg`.
+
+```shell
+monitor 1
+monitorFqdn localhost # taoskeeper's FQDN
+```
+
+For more information, see [TDengine Monitoring Configuration](../config/#monitoring).
 
 ### Command-Line Parameters
 

docs/zh/14-reference/12-config/index.md

@@ -106,7 +106,7 @@ taos --dump-config
 | 适用范围 | 仅服务端适用                                                                                                                                                                                       |
 | 含义     | 服务器内部的系统监控开关。监控主要负责收集物理节点的负载状况，包括 CPU、内存、硬盘、网络带宽的监控记录，监控信息将通过 HTTP 协议发送给由 `monitorFqdn` 和 `monitorProt` 指定的 TaosKeeper 监控服务 |
 | 取值范围 | 0：关闭监控服务， 1：激活监控服务。                                                                                                                                                                |
-| 缺省值   | 1                                                                                                                                                                                                  |
+| 缺省值   | 0                                                                                                                                                                                                  |
 
 ### monitorFqdn
 

docs/zh/14-reference/14-taosKeeper.md

@@ -24,7 +24,15 @@ taosKeeper 安装方式：
 
 taosKeeper 需要在操作系统终端执行，该工具支持三种配置方式：[命令行参数](#命令行参数启动)、[环境变量](#环境变量启动) 和 [配置文件](#配置文件启动)。优先级为：命令行参数、环境变量、配置文件参数。
 
-**在运行 taosKeeper 之前要确保 TDengine 集群与 taosAdapter 已经在正确运行。** 并且 TDengine 已经开启监控服务，具体请参考：[TDengine 监控配置](../config/#监控相关)。
+**在运行 taosKeeper 之前要确保 TDengine 集群与 taosAdapter 已经在正确运行。** 并且 TDengine 已经开启监控服务，TDengine 配置文件 `taos.cfg` 中至少需要配置 `monitor` 和 `monitorFqdn`。
+
+```shell
+monitor 1
+monitorFqdn localhost # taoskeeper 服务的 FQDN
+```
+
+TDengine 监控配置相关，具体请参考：[TDengine 监控配置](../config/#监控相关)。
+
 
 ### 命令行参数启动