- 29 11月, 2012 4 次提交
-
-
由 Abhishek Kona 提交于
Summary: Scripted and removed all trailing spaces and converted all tabs to spaces. Also fixed other lint errors. All lint errors from this point of time should be taken seriously. Test Plan: make all check Reviewers: dhruba Reviewed By: dhruba CC: leveldb Differential Revision: https://reviews.facebook.net/D7059
-
由 Dhruba Borthakur 提交于
Summary: Test Plan: Reviewers: CC: Task ID: # Blame Rev:
-
由 Dhruba Borthakur 提交于
Summary: LevelDB should delete almost-new keys when a long-open snapshot exists. The previous behavior is to keep all versions that were created after the oldest open snapshot. This can lead to database size bloat for high-update workloads when there are long-open snapshots and long-open snapshot will be used for logical backup. By "almost new" I mean that the key was updated more than once after the oldest snapshot. If there were two snapshots with seq numbers s1 and s2 (s1 < s2), and if we find two instances of the same key k1 that lie entirely within s1 and s2 (i.e. s1 < k1 < s2), then the earlier version of k1 can be safely deleted because that version is not visible in any snapshot. Test Plan: unit test attached make clean check Differential Revision: https://reviews.facebook.net/D6999
-
由 Abhishek Kona 提交于
Summary: Added FBCODE like linting support to our codebase. Test Plan: arc lint lint's the code. Reviewers: dhruba Reviewed By: dhruba CC: emayanke, leveldb Differential Revision: https://reviews.facebook.net/D7041
-
- 28 11月, 2012 1 次提交
-
-
由 Dhruba Borthakur 提交于
Summary: Print out status at the end of a compaction run. This helps in debugging. Test Plan: make clean check Reviewers: sheki Reviewed By: sheki Differential Revision: https://reviews.facebook.net/D7035
-
- 27 11月, 2012 5 次提交
-
-
由 sheki 提交于
Test Plan: make check Reviewers: dhruba Reviewed By: dhruba CC: emayanke Differential Revision: https://reviews.facebook.net/D6993
-
由 Dhruba Borthakur 提交于
Summary: When we expand the range of keys for a level 0 compaction, we need to invoke ParentFilesInCompaction() only once for the entire range of keys that is being compacted. We were invoking it for each file that was being compacted, but this triggers an assertion because each file's range were contiguous but non-overlapping. I renamed ParentFilesInCompaction to ParentRangeInCompaction to adequately represent that it is the range-of-keys and not individual files that we compact in a single compaction run. Here is the assertion that is fixed by this patch. db_test: db/version_set.cc:585: void leveldb::Version::ExtendOverlappingInputs(int, const leveldb::Slice&, const leveldb::Slice&, std::vector<leveldb::FileMetaData*, std::allocator<leveldb::FileMetaData*> >*, int): Assertion `user_cmp->Compare(flimit, user_begin) >= 0' failed. Test Plan: make clean check OPT=-g Reviewers: sheki Reviewed By: sheki CC: MarkCallaghan, emayanke, leveldb Differential Revision: https://reviews.facebook.net/D6963
-
由 Dhruba Borthakur 提交于
-
由 Dhruba Borthakur 提交于
Summary: On fast filesystems (e.g. /dev/shm and ext4), the flushing of memstore to disk was fast and quick, and the background compaction thread was not getting scheduled fast enough to delete obsolete files before the db was closed. This caused the repair method to pick up those files that were not part of the db and the unit test was failing. The fix is to enhance the unti test to run a compaction before closing the database so that all files that are not part of the database are truly deleted from the filesystem. Test Plan: make c_test; ./c_test Reviewers: chip, emayanke, sheki Reviewed By: chip CC: leveldb Differential Revision: https://reviews.facebook.net/D6915
-
由 Chip Turner 提交于
Summary: It would appear our unit tests make use of code from ldb_cmd, and don't always require a valid database handle. D6855 was not aware db_ could sometimes be NULL for such commands, and so it broke reduce_levels_test. This moves the check elsewhere to (at least) fix the 'ldb dump' case of segfaulting when it couldn't open a database. Test Plan: make check Reviewers: dhruba Reviewed By: dhruba CC: leveldb Differential Revision: https://reviews.facebook.net/D6903
-
- 22 11月, 2012 2 次提交
-
-
由 Chip Turner 提交于
Summary: Link statically against snappy, using the gvfs one for facebook environments, and the bundled one otherwise. In addition, fix a few minor segfaults in ldb when it couldn't open the database, and update .gitignore to include a few other build artifacts. Test Plan: make check Reviewers: dhruba Reviewed By: dhruba CC: leveldb Differential Revision: https://reviews.facebook.net/D6855
-
由 Dhruba Borthakur 提交于
Support taking a configurable number of files from the same level to compact in a single compaction run. Summary: The compaction process takes some files from LevelK and merges it into LevelK+1. The number of files it picks from LevelK was capped such a way that the total amount of data picked does not exceed the maxfilesize of that level. This essentially meant that only one file from LevelK is picked for a single compaction. For bulkloads, we would like to take many many file from LevelK and compact them using a single compaction run. This patch introduces a option called the 'source_compaction_factor' (similar to expanded_compaction_factor). It is a multiplier that is multiplied by the maxfilesize of that level to arrive at the limit that is used to throttle the number of source files from LevelK. For bulk loads, set source_compaction_factor to a very high number so that multiple files from the same level are picked for compaction in a single compaction. The default value of source_compaction_factor is 1, so that we can keep backward compatibilty with existing compaction semantics. Test Plan: make clean check Reviewers: emayanke, sheki Reviewed By: emayanke CC: leveldb Differential Revision: https://reviews.facebook.net/D6867
-
- 21 11月, 2012 2 次提交
-
-
由 Dhruba Borthakur 提交于
Summary: This option is needed for fast bulk uploads. The goal is to load all the data into files in L0 without any interference from background compactions. Test Plan: make clean check Reviewers: sheki Reviewed By: sheki CC: leveldb Differential Revision: https://reviews.facebook.net/D6849
-
由 Dhruba Borthakur 提交于
Summary: The method Finalize() recomputes the compaction score of each level and then sorts these score from largest to smallest. The idea is that the level with the largest compaction score will be a better candidate for compaction. There are usually very few levels, and a bubble sort code was used to sort these compaction scores. There existed a bug in the sorting code that skipped looking at the score for the n-1 level. This meant that even if the compaction score of the n-1 level is large, it will not be picked for compaction. This patch fixes the bug and also introduces "asserts" in the code to detect any possible inconsistencies caused by future bugs. This bug existed in the very first code change that introduced multi-threaded compaction to the leveldb code. That version of code was committed on Oct 19th via https://github.com/facebook/leveldb/commit/1ca0584345af85d2dccc434f451218119626d36e Test Plan: make clean check OPT=-g Reviewers: emayanke, sheki, MarkCallaghan Reviewed By: sheki CC: leveldb Differential Revision: https://reviews.facebook.net/D6837
-
- 20 11月, 2012 10 次提交
-
-
由 Dhruba Borthakur 提交于
Summary: make check OPT=-g fails with the following assert. ==== Test DBTest.ApproximateSizes db_test: db/version_set.cc:765: void leveldb::VersionSet::Builder::CheckConsistencyForDeletes(leveldb::VersionEdit*, int, int): Assertion `found' failed. The assertion was that file #7 that was being deleted did not preexists, but actualy it did pre-exist as shown in the manifest dump shows below. The bug was that we did not check for file existance at the same level. *************************Edit[0] = VersionEdit { Comparator: leveldb.BytewiseComparator } *************************Edit[1] = VersionEdit { LogNumber: 8 PrevLogNumber: 0 NextFile: 9 LastSeq: 80 AddFile: 0 7 8005319 'key000000' @ 1 : 1 .. 'key000079' @ 80 : 1 } *************************Edit[2] = VersionEdit { LogNumber: 8 PrevLogNumber: 0 NextFile: 13 LastSeq: 80 CompactPointer: 0 'key000079' @ 80 : 1 DeleteFile: 0 7 AddFile: 1 9 2101425 'key000000' @ 1 : 1 .. 'key000020' @ 21 : 1 AddFile: 1 10 2101425 'key000021' @ 22 : 1 .. 'key000041' @ 42 : 1 AddFile: 1 11 2101425 'key000042' @ 43 : 1 .. 'key000062' @ 63 : 1 AddFile: 1 12 1701165 'key000063' @ 64 : 1 .. 'key000079' @ 80 : 1 } Test Plan: Reviewers: CC: Task ID: # Blame Rev:
-
由 Dhruba Borthakur 提交于
-
由 Dhruba Borthakur 提交于
Summary: Fix compilation error while compiling with OPT=-g Test Plan: make clean check OPT=-g Reviewers: CC: Task ID: # Blame Rev:
-
由 Dhruba Borthakur 提交于
7889e094 Summary: Fix compilation error introduced by previous commit 7889e094 Test Plan: make clean check
-
由 Dhruba Borthakur 提交于
Summary: The manifest file contains a series of edits. If the verbose option is switched on, then print each individual edit in the manifest file. This helps in debugging. Test Plan: make clean manifest_dump Reviewers: emayanke, sheki Reviewed By: sheki CC: leveldb Differential Revision: https://reviews.facebook.net/D6807
-
由 Abhishek Kona 提交于
Summary: StringStream.clear() does not clear the stream. It sets some flags. Who knew? Fixing that is not printing the stuff again and again. Test Plan: ran it on a local db Reviewers: dhruba, emayanke Reviewed By: dhruba Differential Revision: https://reviews.facebook.net/D6795
-
由 amayank 提交于
Summary: The new function MinLevelToCompress in db_test.cc was incomplete. It needs to tell the calling function-TEST whether the test has to be skipped or not Test Plan: make all;./db_test Reviewers: dhruba, heyongqiang Reviewed By: dhruba CC: sheki Differential Revision: https://reviews.facebook.net/D6771
-
由 Abhishek Kona 提交于
Summary: Add option to read WAL and print a summary for each record. facebook task => #1885013 E.G. Output : ./ldb dump_wal --walfile=/tmp/leveldbtest-5907/dbbench/026122.log --header Sequence,Count,ByteSize 49981,1,100033 49981,1,100033 49982,1,100033 49981,1,100033 49982,1,100033 49983,1,100033 49981,1,100033 49982,1,100033 49983,1,100033 49984,1,100033 49981,1,100033 49982,1,100033 Test Plan: Works run ./ldb read_wal --wal-file=/tmp/leveldbtest-5907/dbbench/000078.log --header Reviewers: dhruba, heyongqiang Reviewed By: dhruba CC: emayanke, leveldb, zshao Differential Revision: https://reviews.facebook.net/D6675
-
由 Dhruba Borthakur 提交于
Summary: The manifest file contains a series of edits. If the verbose option is switched on, then print each individual edit in the manifest file. This helps in debugging. Test Plan: make clean manifest_dump Reviewers: emayanke, sheki Reviewed By: sheki CC: leveldb Differential Revision: https://reviews.facebook.net/D6807
-
由 Abhishek Kona 提交于
Summary: StringStream.clear() does not clear the stream. It sets some flags. Who knew? Fixing that is not printing the stuff again and again. Test Plan: ran it on a local db Reviewers: dhruba, emayanke Reviewed By: dhruba Differential Revision: https://reviews.facebook.net/D6795
-
- 19 11月, 2012 1 次提交
-
-
由 Dhruba Borthakur 提交于
Summary: dbstress has an option to reopen the database. Make it such that the previous handle is not closed before we reopen, this simulates a situation similar to a process crash. Added new api to DMImpl to remove the lock file. Test Plan: run db_stress Reviewers: emayanke Reviewed By: emayanke CC: leveldb Differential Revision: https://reviews.facebook.net/D6777
-
- 17 11月, 2012 2 次提交
-
-
由 amayank 提交于
Summary: The new function MinLevelToCompress in db_test.cc was incomplete. It needs to tell the calling function-TEST whether the test has to be skipped or not Test Plan: make all;./db_test Reviewers: dhruba, heyongqiang Reviewed By: dhruba CC: sheki Differential Revision: https://reviews.facebook.net/D6771
-
由 Abhishek Kona 提交于
Summary: Add option to read WAL and print a summary for each record. facebook task => #1885013 E.G. Output : ./ldb dump_wal --walfile=/tmp/leveldbtest-5907/dbbench/026122.log --header Sequence,Count,ByteSize 49981,1,100033 49981,1,100033 49982,1,100033 49981,1,100033 49982,1,100033 49983,1,100033 49981,1,100033 49982,1,100033 49983,1,100033 49984,1,100033 49981,1,100033 49982,1,100033 Test Plan: Works run ./ldb read_wal --wal-file=/tmp/leveldbtest-5907/dbbench/000078.log --header Reviewers: dhruba, heyongqiang Reviewed By: dhruba CC: emayanke, leveldb, zshao Differential Revision: https://reviews.facebook.net/D6675
-
- 15 11月, 2012 3 次提交
-
-
由 Dhruba Borthakur 提交于
Summary: Create more than one background compaction thread if specified. This code peice is similar to what exists in db_bench. Test Plan: make check Differential Revision: https://reviews.facebook.net/D6753
-
由 Dhruba Borthakur 提交于
Conflicts: db/db_impl.h
-
由 Dhruba Borthakur 提交于
Summary: The value specified in max_grandparent_overlap_factor is used to limit the file size in a compaction run. This patch makes it configurable when using db_bench. Test Plan: make clean db_bench Reviewers: MarkCallaghan, heyongqiang Reviewed By: heyongqiang CC: leveldb Differential Revision: https://reviews.facebook.net/D6729
-
- 14 11月, 2012 4 次提交
-
-
由 Dhruba Borthakur 提交于
Summary: Test Plan: Reviewers: CC: Task ID: # Blame Rev:
-
由 Dhruba Borthakur 提交于
Summary: The fbcode compilation was always switching on msse by default. This patch keeps the same behaviour but allows the compilation process to switch off msse if needed. If one does not want to use sse, then do the following: export USE_SSE=0 make clean all Test Plan: make clean all Reviewers: heyongqiang Reviewed By: heyongqiang CC: leveldb Differential Revision: https://reviews.facebook.net/D6717
-
由 Dhruba Borthakur 提交于
Summary: There are applications that operate on multiple leveldb instances. These applications will like to pass in an opaque type for each leveldb instance and this type should be passed back to the application with every invocation of the CompactionFilter api. Test Plan: Enehanced unit test for opaque parameter to CompactionFilter. Reviewers: heyongqiang Reviewed By: heyongqiang CC: MarkCallaghan, sheki, emayanke Differential Revision: https://reviews.facebook.net/D6711
-
由 Dhruba Borthakur 提交于
Summary: Compilation used to fail with the error: db/version_set.cc:1773: error: ‘number_of_files_to_sort_’ is not a member of ‘leveldb::VersionSet’ I created a new method called CheckConsistencyForDeletes() so that all the high cost checking is done only when OPT=-g is specified. I also fixed a bug in PickCompactionBySize that was triggered when OPT=-g was switched on. The base_index in the compaction record was not set correctly. Test Plan: make check OPT=-g Differential Revision: https://reviews.facebook.net/D6687
-
- 13 11月, 2012 3 次提交
-
-
由 Dhruba Borthakur 提交于
Summary: The db_bench utility was broken in 1.5.4.fb because of a signed-unsigned comparision. The static variable FLAGS_min_level_to_compress was recently changed from int to 'unsigned in' but it is initilized to a nagative value -1. The segfault is of this type: Program received signal SIGSEGV, Segmentation fault. Open (this=0x7fffffffdee0) at db/db_bench.cc:939 939 db/db_bench.cc: No such file or directory. (gdb) where Test Plan: run db_bench with no options. Reviewers: heyongqiang Reviewed By: heyongqiang CC: MarkCallaghan, emayanke, sheki Differential Revision: https://reviews.facebook.net/D6663
-
由 amayank 提交于
Introducing "database reopens" into the stress test. Database will reopen after a specified number of iterations (configurable) of each thread when they will wait for the databse to reopen. Summary: FLAGS_reopen (configurable) specifies the number of times the databse is to be reopened. FLAGS_ops_per_thread is divided into points based on that reopen field. At these points all threads come together to wait for the databse to reopen. Each thread "votes" for the database to reopen and when all have voted, the database reopens. Test Plan: make all;./db_stress Reviewers: dhruba, MarkCallaghan, sheki, asad, heyongqiang Reviewed By: dhruba Differential Revision: https://reviews.facebook.net/D6627
-
由 heyongqiang 提交于
Summary: I changed the reduce_num_levels logic to avoid "compactRange()" call if the current number of levels in use (levels that contain files) is smaller than the new num of levels. And that change breaks the assert in reduce_levels_test Test Plan: run reduce_levels_test Reviewers: dhruba, MarkCallaghan Reviewed By: dhruba CC: emayanke, sheki Differential Revision: https://reviews.facebook.net/D6651
-
- 11 11月, 2012 1 次提交
-
-
由 Dhruba Borthakur 提交于
Summary: make clean check OPT=-g fails leveldb::DBStatistics::getTickerCount(leveldb::Tickers)’: ./db/db_statistics.h:34: error: ‘MAX_NO_TICKERS’ was not declared in this scope util/ldb_cmd.cc:255: warning: left shift count >= width of type Test Plan: make clean check OPT=-g Reviewers: CC: Task ID: # Blame Rev:
-
- 10 11月, 2012 2 次提交
-
-
由 Abhishek Kona 提交于
Summary: Record BloomFliter hits and drop off reasons during compaction. Test Plan: Unit tests work. Reviewers: dhruba, heyongqiang Reviewed By: dhruba Differential Revision: https://reviews.facebook.net/D6591
-
由 heyongqiang 提交于
Summary: disable size compaction in ldb reduce_levels, this will avoid compactions rather than the manual comapction, added --compression=none|snappy|zlib|bzip2 and --file_size= per-file size to ldb reduce_levels command Test Plan: run ldb Reviewers: dhruba, MarkCallaghan Reviewed By: dhruba CC: sheki, emayanke Differential Revision: https://reviews.facebook.net/D6597
-