Summary:
Currently, if RocksDB encounters errors during a write operation (user requested or BG operations), it sets DBImpl::bg_error_ and fails subsequent writes. This PR allows the DB to be resumed for certain classes of errors. It consists of 3 parts -
1. Introduce Status::Severity in rocksdb::Status to indicate whether a given error can be recovered from or not
2. Refactor the error handling code so that setting bg_error_ and deciding on severity is in one place
3. Provide an API for the user to clear the error and resume the DB instance

This whole change is broken up into multiple PRs. Initially, we only allow clearing the error for Status::NoSpace() errors during background flush/compaction. Subsequent PRs will expand this to include more errors and foreground operations such as Put(), and implement a polling mechanism for out-of-space errors.
Closes https://github.com/facebook/rocksdb/pull/3997

Differential Revision: D8653831

Pulled By: anand1976

fbshipit-source-id: 6dc835c76122443a7668497c0226b4f072bc6afd

Summary:
This patch record min log number to keep to the manifest while flushing SST files to ignore them and any WAL older than them during recovery. This is to avoid scenarios when we have a gap between the WAL files are fed to the recovery procedure. The gap could happen by for example out-of-order WAL deletion. Such gap could cause problems in 2PC recovery where the prepared and commit entry are placed into two separate WAL and gap in the WALs could result into not processing the WAL with the commit entry and hence breaking the 2PC recovery logic.

Before the commit, for 2PC case, we determined which log number to keep in FindObsoleteFiles(). We looked at the earliest logs with outstanding prepare entries, or prepare entries whose respective commit or abort are in memtable. With the commit, the same calculation is done while we apply the SST flush. Just before installing the flush file, we precompute the earliest log file to keep after the flush finishes using the same logic (but skipping the memtables just flushed), record this information to the manifest entry for this new flushed SST file. This pre-computed value is also remembered in memory, and will later be used to determine whether a log file can be deleted. This value is unlikely to change until next flush because the commit entry will stay in memtable. (In WritePrepared, we could have removed the older log files as soon as all prepared entries are committed. It's not yet done anyway. Even if we do it, the only thing we loss with this new approach is earlier log deletion between two flushes, which does not guarantee to happen anyway because the obsolete file clean-up function is only executed after flush or compaction)

This min log number to keep is stored in the manifest using the safely-ignore customized field of AddFile entry, in order to guarantee that the DB generated using newer release can be opened by previous releases no older than 4.2.
Closes https://github.com/facebook/rocksdb/pull/3765

Differential Revision: D7747618

Pulled By: siying

fbshipit-source-id: d00c92105b4f83852e9754a1b70d6b64cb590729

Summary:
Add `compaction_reason` as part of event log for event `compaction started`.
Add counters for each `CompactionReason`.
Closes https://github.com/facebook/rocksdb/pull/3679

Differential Revision: D7550348

Pulled By: riversand963

fbshipit-source-id: a19cff3a678c785aa5ef41aac78b9a5968fcc34d

Summary:
Right now flush reason "SuperVersion Change" covers a few different scenarios which is a bit vague. For example, the following db_bench job should trigger "Write Buffer Full"

> $ TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=fillrandom -write_buffer_size=1048576 -target_file_size_base=1048576 -max_bytes_for_level_base=4194304
$ grep 'flush_reason' /dev/shm/dbbench/LOG
...
2018/03/06-17:30:42.543638 7f2773b99700 EVENT_LOG_v1 {"time_micros": 1520386242543634, "job": 192, "event": "flush_started", "num_memtables": 1, "num_entries": 7006, "num_deletes": 0, "memory_usage": 1018024, "flush_reason": "SuperVersion Change"}
2018/03/06-17:30:42.569541 7f2773b99700 EVENT_LOG_v1 {"time_micros": 1520386242569536, "job": 193, "event": "flush_started", "num_memtables": 1, "num_entries": 7006, "num_deletes": 0, "memory_usage": 1018104, "flush_reason": "SuperVersion Change"}
2018/03/06-17:30:42.596396 7f2773b99700 EVENT_LOG_v1 {"time_micros": 1520386242596392, "job": 194, "event": "flush_started", "num_memtables": 1, "num_entries": 7008, "num_deletes": 0, "memory_usage": 1018048, "flush_reason": "SuperVersion Change"}
2018/03/06-17:30:42.622444 7f2773b99700 EVENT_LOG_v1 {"time_micros": 1520386242622440, "job": 195, "event": "flush_started", "num_memtables": 1, "num_entries": 7006, "num_deletes": 0, "memory_usage": 1018104, "flush_reason": "SuperVersion Change"}

With the fix:
> 2018/03/19-14:40:02.341451 7f11dc257700 EVENT_LOG_v1 {"time_micros": 1521495602341444, "job": 98, "event": "flush_started", "num_memtables": 1, "num_entries": 7009, "num_deletes": 0, "memory_usage": 1018008, "flush_reason": "Write Buffer Full"}
2018/03/19-14:40:02.379655 7f11dc257700 EVENT_LOG_v1 {"time_micros": 1521495602379642, "job": 100, "event": "flush_started", "num_memtables": 1, "num_entries": 7006, "num_deletes": 0, "memory_usage": 1018016, "flush_reason": "Write Buffer Full"}
2018/03/19-14:40:02.418479 7f11dc257700 EVENT_LOG_v1 {"time_micros": 1521495602418474, "job": 101, "event": "flush_started", "num_memtables": 1, "num_entries": 7009, "num_deletes": 0, "memory_usage": 1018104, "flush_reason": "Write Buffer Full"}
2018/03/19-14:40:02.455084 7f11dc257700 EVENT_LOG_v1 {"time_micros": 1521495602455079, "job": 102, "event": "flush_started", "num_memtables": 1, "num_entries": 7009, "num_deletes": 0, "memory_usage": 1018048, "flush_reason": "Write Buffer Full"}
2018/03/19-14:40:02.492293 7f11dc257700 EVENT_LOG_v1 {"time_micros": 1521495602492288, "job": 104, "event": "flush_started", "num_memtables": 1, "num_entries": 7007, "num_deletes": 0, "memory_usage": 1018056, "flush_reason": "Write Buffer Full"}
2018/03/19-14:40:02.528720 7f11dc257700 EVENT_LOG_v1 {"time_micros": 1521495602528715, "job": 105, "event": "flush_started", "num_memtables": 1, "num_entries": 7006, "num_deletes": 0, "memory_usage": 1018104, "flush_reason": "Write Buffer Full"}
2018/03/19-14:40:02.566255 7f11dc257700 EVENT_LOG_v1 {"time_micros": 1521495602566238, "job": 107, "event": "flush_started", "num_memtables": 1, "num_entries": 7009, "num_deletes": 0, "memory_usage": 1018112, "flush_reason": "Write Buffer Full"}
Closes https://github.com/facebook/rocksdb/pull/3627

Differential Revision: D7328772

Pulled By: miasantreble

fbshipit-source-id: 67c94065fbdd36930f09930aad0aaa6d2c152bb8

Summary:
It's always a mystery from the logs why flush was triggered -- user triggered it manually, WriteBufferManager triggered it,  logs were full, write buffer was full, etc.
This PR logs Flush reason whenever a flush is scheduled.
Closes https://github.com/facebook/rocksdb/pull/3401

Differential Revision: D6788142

Pulled By: miasantreble

fbshipit-source-id: a867e54d493c06adf5172bd36a180fb3faae3511

Summary:
Add a new histogram stat called rocksdb.db.flush.micros for memtable
flush
Closes https://github.com/facebook/rocksdb/pull/3269

Differential Revision: D6559496

Pulled By: anand1976

fbshipit-source-id: f5c771ba2568630458751795e8c37a493ff9b14d

Summary: Closes https://github.com/facebook/rocksdb/pull/3264

Differential Revision: D6552768

Pulled By: siying

fbshipit-source-id: 6303110aff22f341d5cff41f8d2d4f138a53652d

Summary:
`GetCurrentTime()` is used to populate `creation_time` table property during flushes and compactions. It is safe to ignore `GetCurrentTime()` failures here but they should be logged.

(Note that `creation_time` property was introduced as part of TTL-based FIFO compaction in #2480.)

Tes Plan:
`make check`
Closes https://github.com/facebook/rocksdb/pull/3231

Differential Revision: D6501935

Pulled By: sagar0

fbshipit-source-id: 376adcf4ab801d3a43ec4453894b9a10909c8eb6

Summary:
Add a simple policy for NVMe write time life hint
Closes https://github.com/facebook/rocksdb/pull/3095

Differential Revision: D6298030

Pulled By: shligit

fbshipit-source-id: 9a72a42e32e92193af11599eb71f0cf77448e24d

Summary:
We don't propagate TableProperty::oldest_key_time on compaction and just write the default value to SST files. It is more natural to default the value to 0.

Also revert db_sst_test back to before #2842.
Closes https://github.com/facebook/rocksdb/pull/3079

Differential Revision: D6165702

Pulled By: yiwu-arbug

fbshipit-source-id: ca3ce5928d96ae79a5beb12bb7d8c640a71478a0

Pulled By: ajkr

Differential Revision: D6170448

fbshipit-source-id: 5fd6d1608fc0df27c94d9f5059315ce7f79b8f5c

Summary:
With FIFO compaction we would like to get the oldest data time for monitoring. The problem is we don't have timestamp for each key in the DB. As an approximation, we expose the earliest of sst file "creation_time" property.

My plan is to override the property with a more accurate value with blob db, where we actually have timestamp.
Closes https://github.com/facebook/rocksdb/pull/2842

Differential Revision: D5770600

Pulled By: yiwu-arbug

fbshipit-source-id: 03833c8f10bbfbee62f8ea5c0d03c0cafb5d853a

Summary:
Update Compaction/Flush to support WritePreparedTxnDB: Add SnapshotChecker which is a proxy to query WritePreparedTxnDB::IsInSnapshot. Pass SnapshotChecker to DBImpl on WritePreparedTxnDB open. CompactionIterator use it to check if a key has been committed and if it is visible to a snapshot. In CompactionIterator:
* check if key has been committed. If not, output uncommitted keys AS-IS.
* use SnapshotChecker to check if key is visible to a snapshot when in need.
* do not output key with seq = 0 if the key is not committed.
Closes https://github.com/facebook/rocksdb/pull/2926

Differential Revision: D5902907

Pulled By: yiwu-arbug

fbshipit-source-id: 945e037fdf0aa652dc5ba0ad879461040baa0320

Summary:
SUMMARY
Moves the bytes_per_sync and wal_bytes_per_sync options from immutableoptions to mutable options. Also if wal_bytes_per_sync is changed, the wal file and memtables are flushed.
TEST PLAN
ran make check
all passed

Two new tests SetBytesPerSync, SetWalBytesPerSync check that after issuing setoptions with a new value for the var, the db options have the new value.
Closes https://github.com/facebook/rocksdb/pull/2893

Reviewed By: yiwu-arbug

Differential Revision: D5845814

Pulled By: TheRushingWookie

fbshipit-source-id: 93b52d779ce623691b546679dcd984a06d2ad1bd

Summary: Closes https://github.com/facebook/rocksdb/pull/2589

Differential Revision: D5431502

Pulled By: siying

fbshipit-source-id: 8ebf8c87883daa9daa54b2303d11ce01ab1f6f75

Summary:
Valgrind had false positive complaints about the initialization pattern for `GetCurrentTime()`'s argument in #2480. We can instead have the client initialize the time variable before calling `GetCurrentTime()`, and have `GetCurrentTime()` promise to only overwrite it in success case.
Closes https://github.com/facebook/rocksdb/pull/2526

Differential Revision: D5358689

Pulled By: ajkr

fbshipit-source-id: 857b189f24c19196f6bb299216f3e23e7bc4be42

Summary:
Introducing FIFO compactions with TTL.

FIFO compaction is based on size only which makes it tricky to enable in production as use cases can have organic growth. A user requested an option to drop files based on the time of their creation instead of the total size.

To address that request:
- Added a new TTL option to FIFO compaction options.
- Updated FIFO compaction score to take TTL into consideration.
- Added a new table property, creation_time, to keep track of when the SST file is created.
- Creation_time is set as below:
  - On Flush: Set to the time of flush.
  - On Compaction: Set to the max creation_time of all the files involved in the compaction.
  - On Repair and Recovery: Set to the time of repair/recovery.
  - Old files created prior to this code change will have a creation_time of 0.
- FIFO compaction with TTL is enabled when ttl > 0. All files older than ttl will be deleted during compaction. i.e. `if (file.creation_time < (current_time - ttl)) then delete(file)`. This will enable cases where you might want to delete all files older than, say, 1 day.
- FIFO compaction will fall back to the prior way of deleting files based on size if:
  - the creation_time of all files involved in compaction is 0.
  - the total size (of all SST files combined) does not drop below `compaction_options_fifo.max_table_files_size` even if the files older than ttl are deleted.

This feature is not supported if max_open_files != -1 or with table formats other than Block-based.

**Test Plan:**
Added tests.

**Benchmark results:**
Base: FIFO with max size: 100MB ::
```
svemuri@dev15905 ~/rocksdb (fifo-compaction) $ TEST_TMPDIR=/dev/shm ./db_bench --benchmarks=readwhilewriting --num=5000000 --threads=16 --compaction_style=2 --fifo_compaction_max_table_files_size_mb=100

readwhilewriting :       1.924 micros/op 519858 ops/sec;   13.6 MB/s (1176277 of 5000000 found)
```

With TTL (a low one for testing) ::
```
svemuri@dev15905 ~/rocksdb (fifo-compaction) $ TEST_TMPDIR=/dev/shm ./db_bench --benchmarks=readwhilewriting --num=5000000 --threads=16 --compaction_style=2 --fifo_compaction_max_table_files_size_mb=100 --fifo_compaction_ttl=20

readwhilewriting :       1.902 micros/op 525817 ops/sec;   13.7 MB/s (1185057 of 5000000 found)
```
Example Log lines:
```
2017/06/26-15:17:24.609249 7fd5a45ff700 (Original Log Time 2017/06/26-15:17:24.609177) [db/compaction_picker.cc:1471] [default] FIFO compaction: picking file 40 with creation time 1498515423 for deletion
2017/06/26-15:17:24.609255 7fd5a45ff700 (Original Log Time 2017/06/26-15:17:24.609234) [db/db_impl_compaction_flush.cc:1541] [default] Deleted 1 files
...
2017/06/26-15:17:25.553185 7fd5a61a5800 [DEBUG] [db/db_impl_files.cc:309] [JOB 0] Delete /dev/shm/dbbench/000040.sst type=2 #40 -- OK
2017/06/26-15:17:25.553205 7fd5a61a5800 EVENT_LOG_v1 {"time_micros": 1498515445553199, "job": 0, "event": "table_file_deletion", "file_number": 40}
```

SST Files remaining in the dbbench dir, after db_bench execution completed:
```
svemuri@dev15905 ~/rocksdb (fifo-compaction)  $ ls -l /dev/shm//dbbench/*.sst
-rw-r--r--. 1 svemuri users 30749887 Jun 26 15:17 /dev/shm//dbbench/000042.sst
-rw-r--r--. 1 svemuri users 30768779 Jun 26 15:17 /dev/shm//dbbench/000044.sst
-rw-r--r--. 1 svemuri users 30757481 Jun 26 15:17 /dev/shm//dbbench/000046.sst
```
Closes https://github.com/facebook/rocksdb/pull/2480

Differential Revision: D5305116

Pulled By: sagar0

fbshipit-source-id: 3e5cfcf5dd07ed2211b5b37492eb235b45139174

Summary: Closes https://github.com/facebook/rocksdb/pull/2226

Differential Revision: D4967547

Pulled By: siying

fbshipit-source-id: dd3b58ae1e7a106ab6bb6f37ab5c88575b125ab4

Summary:
Replace Options::use_direct_writes with Options::use_direct_io_for_flush_and_compaction
Now if Options::use_direct_io_for_flush_and_compaction = true, we will enable direct io for both reads and writes for flush and compaction job. Whereas Options::use_direct_reads controls user reads like iterator and Get().
Closes https://github.com/facebook/rocksdb/pull/2117

Differential Revision: D4860912

Pulled By: lightmark

fbshipit-source-id: d93575a8a5e780cf7e40797287edc425ee648c19

Summary:
Move memtable related files into memtable directory.
Closes https://github.com/facebook/rocksdb/pull/2087

Differential Revision: D4829242

Pulled By: yiwu-arbug

fbshipit-source-id: ca70ab6

Summary:
Move some files under util/ to new directories env/, monitoring/ options/ and cache/
Closes https://github.com/facebook/rocksdb/pull/2090

Differential Revision: D4833681

Pulled By: siying

fbshipit-source-id: 2fd8bef

Summary:
It is confusing to have auto_roll_logger to stay under db/, which has nothing to do with database. Move filename together as it is a dependency.
Closes https://github.com/facebook/rocksdb/pull/2080

Differential Revision: D4821141

Pulled By: siying

fbshipit-source-id: ca7d768

Summary:
current logging
```
2017/03/14-14:20:30.393432 7fedde9f5700 (Original Log Time 2017/03/14-14:20:30.393414) [default] Level summary: base level 1 max bytes base 268435456 files[1 0 0 0 0 0 0] max score 0.25
2017/03/14-14:20:30.393438 7fedde9f5700 [JOB 2] Try to delete WAL files size 61417909, prev total WAL file size 73820858, number of live WAL files 2.
2017/03/14-14:20:30.393464 7fedde9f5700 [DEBUG] [JOB 2] Delete /dev/shm/old_logging//MANIFEST-000001 type=3 #1 -- OK
2017/03/14-14:20:30.393472 7fedde9f5700 [DEBUG] [JOB 2] Delete /dev/shm/old_logging//000003.log type=0 #3 -- OK
2017/03/14-14:20:31.427103 7fedd49f1700 [default] New memtable created with log file: #9. Immutable memtables: 0.
2017/03/14-14:20:31.427179 7fedde9f5700 [JOB 3] Syncing log #6
2017/03/14-14:20:31.427190 7fedde9f5700 (Original Log Time 2017/03/14-14:20:31.427170) Calling FlushMemTableToOutputFile with column family [default], flush slots available 1, compaction slots allowed 1, compaction slots scheduled 1
2017/03/14-14:20:31.
Closes https://github.com/facebook/rocksdb/pull/1990

Differential Revision: D4708695

Pulled By: IslamAbdelRahman

fbshipit-source-id: cb8968f

Summary:
Remove disableDataSync, and another similarly named disable_data_sync options.
This is being done to simplify options, and also because the performance gains of this feature can be achieved by other methods.
Closes https://github.com/facebook/rocksdb/pull/1859

Differential Revision: D4541292

Pulled By: sagar0

fbshipit-source-id: 5b3a6ca

Summary:
merger.h was always a confusing name for me, simply give the file a better name
Closes https://github.com/facebook/rocksdb/pull/1836

Differential Revision: D4505357

Pulled By: IslamAbdelRahman

fbshipit-source-id: 07b28d8

Summary:
Fix the bug when sync log fail, FlushJob::Run() will not be execute and
reference to cfd->current() will not be release.
Closes https://github.com/facebook/rocksdb/pull/1792

Differential Revision: D4441316

Pulled By: yiwu-arbug

fbshipit-source-id: 5523e28

Summary:
It was doing `&range_del_iters[0]` on an empty vector. Even though the resulting pointer is never dereferenced, it's still bad for two reasons:
* the practical reason: it crashes with `std::out_of_range` exception in our debug build,
* the "C++ standard lawyer" reason: it's undefined behavior because, in `std::vector` implementation, it probably "dereferences" a null pointer, which is invalid even though it doesn't actually read the pointed memory, just converts a pointer into a reference (and then flush_job.cc converts it back to pointer); nullptr references are undefined behavior.
Closes https://github.com/facebook/rocksdb/pull/1612

Differential Revision: D4265625

Pulled By: al13n321

fbshipit-source-id: db26fb9

Summary:
- Made RangeDelAggregator's InternalKeyComparator member a reference-to-const so we don't need to copy-construct it. Also added InternalKeyComparator to ImmutableCFOptions so we don't need to construct one for each DBIter.
- Made MemTable::NewRangeTombstoneIterator and the table readers' NewRangeTombstoneIterator() functions return nullptr instead of NewEmptyInternalIterator to avoid the allocation. Updated callers accordingly.
Closes https://github.com/facebook/rocksdb/pull/1548

Differential Revision: D4208169

Pulled By: ajkr

fbshipit-source-id: 2fd65cf

Summary:
The Arena construction/destruction introduced significant overhead to read-heavy workload just by creating empty vectors for its blocks, so avoid it in RangeDelAggregator.
Closes https://github.com/facebook/rocksdb/pull/1547

Differential Revision: D4207781

Pulled By: ajkr

fbshipit-source-id: 9d1c130

Summary:
Changed BuildTable() (used for flush) to (1) add range
tombstones to the aggregator, which is used by CompactionIterator to
determine which keys can be removed; and (2) add aggregator's range
tombstones to the table that is output for the flush.
Closes https://github.com/facebook/rocksdb/pull/1438

Differential Revision: D4100025

Pulled By: ajkr

fbshipit-source-id: cb01a70

Summary: Use ImmutableDBOptions/MutableDBOptions internally and DBOptions only for user-facing APIs. MutableDBOptions is barely a placeholder for now. I'll start to move options to MutableDBOptions in following diffs.

Test Plan:
  make all check

Reviewers: yhchiang, IslamAbdelRahman, sdong

Reviewed By: sdong

Subscribers: andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D64065

Summary: One more small refactor before I split DBOptions into mutable and immutable parts.

Test Plan: existing unit tests.

Reviewers: yhchiang, IslamAbdelRahman, sdong

Reviewed By: sdong

Subscribers: andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D64047

Summary: Multiput atomiciy is broken across multiple column families if we don't sync WAL before flushing one column family. The WAL file may contain a write batch containing writes to a key to the CF to be flushed and a key to other CF. If we don't sync WAL before flushing, if machine crashes after flushing, the write batch will only be partial recovered. Data to other CFs are lost.

Test Plan: Add a new unit test which will fail without the diff.

Reviewers: yhchiang, IslamAbdelRahman, igor, yiwu

Reviewed By: yiwu

Subscribers: yiwu, leveldb, andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D60915

Summary:
Fixing erros reported by clang static analyzer.
* Removing some unused variables.
* Adding assertions to fix false positives reported by clang analyzer.
* Adding `__clang_analyzer__` macro to suppress false positive warnings.

Test Plan:
    USE_CLANG=1 OPT=-g make analyze -j64

Reviewers: andrewkr, sdong

Reviewed By: sdong

Subscribers: andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D60549

Summary:
We see some write stalls because of number of unflushed memtables. With existing logging I couldn't figure out what's happening exactly. See internal task t11446054 for details if interested. This diff adds:
- logging of memtable creation at info level; I wanted it on multiple occasions for different reasons; also include number of immutable memtables,
- logging of number of remaining immutable memtables after a flush.

Test Plan: ran tests

Reviewers: sdong

Reviewed By: sdong

Subscribers: andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D58833

Summary:
make more ColumnFamilyOptions dynamic:
- compression
- soft_pending_compaction_bytes_limit
- hard_pending_compaction_bytes_limit
- min_partial_merge_operands
- report_bg_io_stats
- paranoid_file_checks

Test Plan:
Add sanity check in `db_test.cc` for all above options except for soft_pending_compaction_bytes_limit and hard_pending_compaction_bytes_limit.
All passed.

Reviewers: andrewkr, sdong, IslamAbdelRahman

Reviewed By: IslamAbdelRahman

Subscribers: andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D57519

Summary: Added EventListener::OnTableFileCreationStarted. EventListener::OnTableFileCreated will be called on failure case. User can check creation status via TableFileCreationInfo::status.

Test Plan: unit test.

Reviewers: dhruba, yhchiang, ott, sdong

Reviewed By: sdong

Subscribers: sdong, kradhakrishnan, IslamAbdelRahman, andrewkr, yhchiang, leveldb, ott, dhruba

Differential Revision: https://reviews.facebook.net/D56337

Summary:
In https://reviews.facebook.net/D56271, we fixed an issue where
we consider flush as compaction.  However, that makes us mistakenly
count FLUSH_WRITE_BYTES twice (one in flush_job and one in db_impl.)

This patch removes the one incremented in db_impl.

Test Plan: db_test

Reviewers: yiwu, andrewkr, IslamAbdelRahman, kradhakrishnan, sdong

Reviewed By: sdong

Subscribers: andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D57111

Summary: It is useful to print out IO stats in flush jobs too. Extend options.compaction_measure_io_stats to flush jobs and raname it.

Test Plan: Try db_bench and see the stats are printed out.

Reviewers: yhchiang

Reviewed By: yhchiang

Subscribers: kradhakrishnan, yiwu, IslamAbdelRahman, leveldb, andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D56769