- 31 10月, 2019 2 次提交
-
-
由 Michael Klimushyn 提交于
This caused EmbedderTest.VerifyB143464703 to fail after merging into master. ``` ../../flutter/shell/platform/embedder/tests/embedder_unittests.cc:3111: Failure Value of: ImageMatchesFixture("verifyb143464703.png", renderered_scene) Actual: false Expected: true [ FAILED ] EmbedderTest.VerifyB143464703 (2507 ms) ``` This reverts commit 3ad3bc76.
-
由 Michael Klimushyn 提交于
Previously the cache was disabled on whether or not PlatformViews were globally enabled. Instead track their existence in the view hierarchy and only disable RasterCache if a PlatformView is actually present.
-
- 30 10月, 2019 1 次提交
-
-
由 Chinmay Garde 提交于
This used to only be handled correctly for non-root layer backing stores. This was mostly a side effect of the fact that we used recording canvases instead of rendering directly into the backing store. We now use recording canvases consistently. Fixes b/143464703 Fixes https://github.com/flutter/flutter/issues/43732
-
- 24 10月, 2019 1 次提交
-
-
由 Chinmay Garde 提交于
For embedder code that is configured for both AOT and JIT mode Dart execution based on the Flutter engine being linked to, this runtime check may be used to appropriately configure the `FlutterProjectArgs`. In JIT mode execution, the kernel snapshots must be present in the Flutter assets directory specified in the `FlutterProjectArgs`. For AOT execution, the fields `vm_snapshot_data`, `vm_snapshot_instructions`, `isolate_snapshot_data` and `isolate_snapshot_instructions` (along with their size fields) must be specified in `FlutterProjectArgs`.
-
- 23 10月, 2019 1 次提交
-
-
由 Chinmay Garde 提交于
This was previously only possible by sending an undocumented payload over an engine managed channel.
-
- 18 10月, 2019 3 次提交
-
-
由 Chinmay Garde 提交于
This reverts commit 6c2381da and applies iOS fixes.
-
由 Chinmay Garde 提交于
This reverts commit e53d10c3.
-
由 Chinmay Garde 提交于
The contents rendered into the backing stores are already correctly scaled. The initial implementation assumed this also held true for the metrics obtained via embedded view parameters. Fixes b/142699417
-
- 16 10月, 2019 1 次提交
-
-
由 Chinmay Garde 提交于
Embedders may use this to specify a thread whose event loop is managed by them instead of the engine. In addition, specifying the same task runner for both the platform and render task runners allows embedders to effectively perform GPU rendering operations on the platform thread. To affect this change, the following non breaking changes to the API have been made: * The `FlutterCustomTaskRunners` struct now has a new field `render_task_runner` for the specification of a custom render task runner. * The `FlutterTaskRunnerDescription` has a new field `identifier`. Embedders must supply a unique identifier for each task runner they specify. In addition, when describing multiple task runners that run their tasks on the same thread, their identifiers must match. * The embedder may need to process tasks during `FlutterEngineRun` and `FlutterEngineShutdown`. However, the embedder doesn't have the Flutter engine handle before `FlutterEngineRun` and is supposed to relinquish handle right before `FlutterEngineShutdown`. Since the embedder needs the Flutter engine handle to service tasks on other threads while these calls are underway, there exist opportunities for deadlock. To work around this scenario, three new calls have been added that allow more deliberate management of the Flutter engine instance. * `FlutterEngineRun` can be replaced with `FlutterEngineInitialize` and `FlutterEngineRunInitialized`. The embedder can obtain a handle to the engine after the first call but the engine will not post any tasks to custom task runners specified by the embedder till the `FlutterEngineRunInitialized` call. Embedders can guard the Flutter engine handle behind a mutex for safe task runner interop. * `FlutterEngineShutdown` can be preceded by the `FlutterEngineDeinitialize` call. After this call the Flutter engine will no longer post tasks onto embedder managed task runners. It is still embedder responsibility to collect the Flutter engine handle via `FlutterEngineShutdown`. * To maintain backwards compatibility with the old APIs, `FlutterEngineRun` is now just a convenience for `FlutterEngineInitialize` and `FlutterEngineRunInitilaized`. `FlutterEngineShutdown` now implicitly calls `FlutterEngineDeinitialize` as well. This allows existing users who don't care are custom task runner interop to keep using the old APIs. * Adds complete test coverage for both old and new paths. Fixes https://github.com/flutter/flutter/issues/42460 Prerequisite for https://github.com/flutter/flutter/issues/17579
-
- 09 10月, 2019 1 次提交
-
-
由 Chinmay Garde 提交于
Add a unit-test to verify that root surface transformation affect platform view coordinates. (#12783) See b/141980393 for details. In the issue, the embedder (assumed to render Flutter contents of size 800 x 600 [1]) is meant to be displayed on its side. To achieve this, it specifies a root surface transformation that translates the surface by its width (or height when it held in the correct viewing position) and then rotates it counter-clockwise by 90 degrees. This test verifies that the Flutter Engine accounts for those transformations in the custom compositor platform view coodinates. [1] The actual size is something different. 800x600 is for illustrative purposes.
-
- 05 10月, 2019 1 次提交
-
-
由 Chinmay Garde 提交于
Re-enabling this is tracked in https://github.com/flutter/flutter/issues/41999
-
- 28 9月, 2019 1 次提交
-
-
由 liyuqian 提交于
This reverts commit fcc4ab32. Fixes https://github.com/flutter/flutter/issues/41394 and other related correctness issues. TBR: @arbreng @jason-simmons @mehmetf
-
- 26 9月, 2019 1 次提交
-
-
由 David Worsham 提交于
On Fuchsia, add a build flag for compositing OpacityLayers using the system compositor vs Skia, which exposes a fastpath for opacity via Scenic. This will only work under certain circumstances, in particular nested OpacityLayers will not render correctly! On Fuchsia, add a build flag for compositing PhysicalShapeLayers using the system compositor vs Skia. Set to off by default, which restores performant shadows on Fuchsia. Remove the opacity exposed from ChildView, as that was added mistakenly. Finally, we centralize the logic for switching between the system-composited and in-process-composited paths inside of ContainerLayer. We also centralize the logic for computing elevation there. This allows the removal of many OS_FUCHSIA-specific code-paths. Test: Ran workstation on Fuchsia; benchmarked before and after Bug: 23711 Bug: 24163 * Fix broken tests
-
- 24 9月, 2019 1 次提交
-
-
由 chunhtai 提交于
* Add windows font change logic * update * fix comment
-
- 18 9月, 2019 2 次提交
-
-
由 Chinmay Garde 提交于
Account for root surface transformation on the surfaces managed by the external view embedder. (#11384) The earlier design speculated that embedders could affect the same transformations on the layers post engine compositor presentation but before final composition. However, the linked issue points out that this design is not suitable for use with hardware overlay planes. When rendering to the same, to affect the transformation before composition, embedders would have to render to an off-screen render target and then apply the transformation before presentation. This patch negates the need for that off-screen render pass. To be clear, the previous architecture is still fully viable. Embedders still have full control over layer transformations before composition. This is an optimization for the hardware overlay planes use-case. Fixes b/139758641
-
由 Chinmay Garde 提交于
The tests we write must be resilient to the order in which they are run in the harness. That is, they must not rely on global state set by other tests that have already run in the process. Also, these tests must themselves be repeatable. That is, they must correctly clean up after themselves and be able to run successfully again in the same process. This patch adds some safeguards against (but does NOT guarantee) the addition of tests that violate the dictum. Additionally, test failures must be easily reproducible for folks investigating the test failure. Also, tests that assert correctness of unrelated code must not stop progress on the authors patch. This changes does not hinder reproducibility of test failures because the random seed is printed in the logs before running each test. Developers attempting to reproduce the failure locally can do the same via the following invocation `--gtest_shuffle --gtest_repeat=<the count> --gtest_random_seed=<seed from failing run>`. This change does introduce potential burden on patch authors that may see failures in unrelated code as a newly failing shuffle seed is used on their runs. To ameliorate this, we will formulate guidance for them to aggressively mark such tests as disabled and file bugs to enable the same. The test seed is intentionally kept low because it’s purpose is to test that individual tests are repeatable. It must not be used as a replacement for fuzzing.
-
- 27 8月, 2019 1 次提交
-
-
由 Amir Hardon 提交于
This change sets up a "spying canvas" to try and detect empty canvases. When using platform views with a custom embedder, if a platform view overlay canvas is known to be empty we skip creating a compositor layer for that overlay.
-
- 24 8月, 2019 2 次提交
-
-
由 Chinmay Garde 提交于
Uses the same technique used during OpenGL composition to elide root surface access. The refactoring of this approach is tracked in https://github.com/flutter/flutter/issues/38466 Fixes https://github.com/flutter/flutter/issues/39009.
-
由 Chinmay Garde 提交于
We will end up creating fewer threads in tests.
-
- 23 8月, 2019 1 次提交
-
-
由 Chinmay Garde 提交于
-
- 22 8月, 2019 1 次提交
-
-
由 Chinmay Garde 提交于
No functional change. Just makes testing with fixture images easier. Adding a whole lot more tests that use this path for the embedder surface rotation patches. Want to land stuff in smaller chunks.
-
- 21 8月, 2019 2 次提交
-
-
由 Chinmay Garde 提交于
The root canvas is managed by the external view embedder when using a custom compositor. Due to this, frame submission on the surface will not end up flushing the same (because the surface doesn’t have it to begin with). Fixed with tests.
-
由 Jason Simmons 提交于
This test queues tasks to a custom task runner that runs the tasks on the platform thread. After shutting down the engine, the test must wait until these tasks are drained before the test exits.
-
- 20 8月, 2019 1 次提交
-
-
由 Chinmay Garde 提交于
This issue would only manifest when a custom task runner was being used with a custom compositor. Both were tested separately but not together. A new test has been added for this. We still create the GPU thread merger unnecessarily but I can patch that later. I also cleaned up the existing custom task runner test to not submit tasks on a dead engine as they just log errors unnecessarily. Filed new: https://github.com/flutter/flutter/issues/38844
-
- 14 8月, 2019 1 次提交
-
-
由 Chinmay Garde 提交于
This patch allows embedders to split the Flutter layer tree into multiple chunks. These chunks are meant to be composed one on top of another. This gives embedders a chance to interleave their own contents between these chunks. The Flutter embedder API already provides hooks for the specification of textures for the Flutter engine to compose within its own hierarchy (for camera feeds, video, etc..). However, not all embedders can render the contents of such sources into textures the Flutter engine can accept. Moreover, this composition model may have overheads that are non-trivial for certain use cases. In such cases, the embedder may choose to specify multiple render target for Flutter to render into instead of just one. The use of this API allows embedders to perform composition very similar to the iOS embedder. This composition model is used on that platform for the embedding of UIKit view such and web view and map views within the Flutter hierarchy. However, do note that iOS also has threading configurations that are currently not available to custom embedders. The embedder API updates in this patch are ABI stable and existing embedders will continue to work are normal. For embedders that want to enable this composition mode, the API is designed to make it easy to opt into the same in an incremental manner. Rendering of contents into the “root” rendering surface remains unchanged. However, now the application can push “platform views” via a scene builder. These platform views need to handled by a FlutterCompositor specified in a new field at the end of the FlutterProjectArgs struct. When a new platform view in introduced within the layer tree, the compositor will ask the embedder to create a new render target for that platform view. Render targets can currently be OpenGL framebuffers, OpenGL textures or software buffers. The type of the render target returned by the embedder must be compatible with the root render surface. That is, if the root render surface is an OpenGL framebuffer, the render target for each platform view must either be a texture or a framebuffer in the same OpenGL context. New render target types as well as root renderers for newer APIs like Metal & Vulkan can and will be added in the future. The addition of these APIs will be done in an ABI & API stable manner. As Flutter renders frames, it gives the embedder a callback with information about the position of the various platform views in the effective hierarchy. The embedder is then meant to put the contents of the render targets that it setup and had previously given to the engine onto the screen (of course interleaving the contents of the platform views). Unit-tests have been added that test not only the structure and properties of layer hierarchy given to the compositor, but also the contents of the texels rendered by a test compositor using both the OpenGL and software rendering backends. Fixes b/132812775 Fixes flutter/flutter#35410
-
- 09 8月, 2019 1 次提交
-
-
由 Chinmay Garde 提交于
-
- 07 8月, 2019 1 次提交
-
-
由 Chinmay Garde 提交于
This exposes the `Settings::leak_vm` flag to custom embedders. All embedder unit-tests now shut down the VM on the shutdown of the last engine in the process. The mechanics of VM shutdown are already tested in the Shell unit-tests harness in the DartLifecycleUnittests set of of assertions. This just exposes that functionality to custom embedders. Since it is part of the public stable API, I also switched the name of the field to be something less snarky than the field in private shell settings.
-
- 17 7月, 2019 1 次提交
-
-
由 Pierre Champion 提交于
-
- 07 7月, 2019 1 次提交
-
-
由 Chinmay Garde 提交于
-
- 04 7月, 2019 1 次提交
-
-
- 18 6月, 2019 1 次提交
-
-
由 Jason Simmons 提交于
Applications can use an embedder API to obtain the isolate ID and then use it in calls to the Dart service protocol.
-
- 13 6月, 2019 1 次提交
-
-
由 Chinmay Garde 提交于
Currently, all our host unit-tests that have rendering concerns use the software backend because of OpenGL ES availability and stability issues on the various platforms where we run host tests. Unfortunately, entire subsystems are disabled (and not tested) when rendering with the software backend. This patch pulls in SwiftShader and via pending patches in the buildroot, configures the host unit-tests to optionally use OpenGL ES in a stable manner without relying on the OpenGL drivers being present (and functional). I have wired up the embedder test fixture in this patch to use the SwiftShader based OpenGL ES driver. I will update the shell and runtime unittests in a subsequent patch as well. The on and offscreen surfaces are configured as 1x1 pbuffer surface because we should be able to write pixel tests using OpenGL directly wihout having to deal with surfaces.
-
- 26 5月, 2019 1 次提交
-
-
由 Chris Bracken 提交于
Corects a bnuch of typeos throughout teh engien codebsae. Also makes a couple minor Commonwealth -> US spelling adjustments for consistency with the rest of Flutter's codebase. Made use of `misspell` tool: https://github.com/client9/misspell
-
- 10 4月, 2019 1 次提交
-
-
由 Chinmay Garde 提交于
-
- 29 3月, 2019 1 次提交
-
-
由 Chinmay Garde 提交于
-
- 28 3月, 2019 2 次提交
-
-
由 Chinmay Garde 提交于
Currently, all Flutter threads are managed by the engine itself. This works for all threads except the platform thread. On this thread, the engine cannot see the underlying event multiplexing mechanism. Using the new task runner interfaces, the engine can relinquish the task of setting up the event multiplexing mechanism and instead have the embedder provide one for it during setup. This scheme is only wired up for the platform thread. But, the eventual goal is to expose this message loop interoperability for all threads.
-
由 Chinmay Garde 提交于
This reverts commit 7e77d5c4 after fixing Windows issues.
-
- 27 3月, 2019 3 次提交
-
-
由 Chinmay Garde 提交于
Revert "Allow specification of std::functions as native entrypoints from Dart code. (#8309)" (#8312) This reverts commit 400a86a6.
-
由 Chinmay Garde 提交于
This allows for the specification of std::functions (using EmbedderContext::NativeEntry) with their captures as native entrypoints. Earlier, only C functions we allowed which meant that there were no captures and assertions had to use globals which could introduce bugs when used with gtest_repeat.
-
由 Chinmay Garde 提交于
-