[stm32f1] 对于RTC-Alarm进行添加STM32F1宏控制 (#6765)

并确认并列出已经在什么情况或板卡上进行了测试。
And confirm in which case or board has been tested. -->
STM32F103ZET6

为什么提交这份PR (why to submit this PR)
使用STM32F103ZET6的RTC的Alarm功能出现问题，按照原本的驱动代码编译会报错。

你的解决方案是什么 (what is your solution)
修改底层驱动drv_rtc.c文件，将报错的几个结构体给注释掉即可。

在什么测试环境下测试通过 (what is the test environment)
rtstudio下对STM32F103ZET6进行测试并且成功运行Alarm功能

bsp/stm32/libraries/HAL_Drivers/drv_rtc.c

@@ -368,14 +368,16 @@ static rt_err_t rtc_alarm_time_set(struct rtc_device_object* p_dev)
     if (p_dev->wkalarm.enable)
     {
         Alarm_InitStruct.Alarm = RTC_ALARM_A;
+        Alarm_InitStruct.AlarmTime.Hours = p_dev->wkalarm.tm_hour;
+        Alarm_InitStruct.AlarmTime.Minutes = p_dev->wkalarm.tm_min;
+        Alarm_InitStruct.AlarmTime.Seconds = p_dev->wkalarm.tm_sec;
+#ifndef SOC_SERIES_STM32F1
         Alarm_InitStruct.AlarmDateWeekDay = RTC_WEEKDAY_MONDAY;
         Alarm_InitStruct.AlarmDateWeekDaySel = RTC_ALARMDATEWEEKDAYSEL_WEEKDAY;
         Alarm_InitStruct.AlarmMask = RTC_ALARMMASK_DATEWEEKDAY;
         Alarm_InitStruct.AlarmSubSecondMask = RTC_ALARMSUBSECONDMASK_NONE;
         Alarm_InitStruct.AlarmTime.TimeFormat = RTC_HOURFORMAT12_AM;
-        Alarm_InitStruct.AlarmTime.Hours = p_dev->wkalarm.tm_hour;
-        Alarm_InitStruct.AlarmTime.Minutes = p_dev->wkalarm.tm_min;
-        Alarm_InitStruct.AlarmTime.Seconds = p_dev->wkalarm.tm_sec;
+#endif  /* SOC_SERIES_STM32F1 */
         LOG_D("alarm set:%d:%d:%d", Alarm_InitStruct.AlarmTime.Hours,
             Alarm_InitStruct.AlarmTime.Minutes,
             Alarm_InitStruct.AlarmTime.Seconds);