Merge pull request #4957 from jqj96/master

为复旦微电子FM33LC0XX添加BSP。包含UART驱动，已经在板子上测试通过。

.ignore_format.yml

@@ -12,6 +12,7 @@ dir_path:
 - components/net/lwip-2.0.3
 - components/net/lwip-2.1.2
 - bsp/mm32f327x/Libraries
+- bsp/fm33lc026/libraries
 - bsp/stm32/libraries/STM32F0xx_HAL
 - bsp/stm32/libraries/STM32F2xx_HAL
 - bsp/stm32/libraries/STM32F4xx_HAL

bsp/Copyright_Notice.md

@@ -125,6 +125,17 @@ Path:
 - bsp/essemi/es32f0654/libraries/CMSIS/Include
 - bsp/essemi/es8p508x/libraries/CMSIS
 
+###fm33lc026
+
+License: Mulan PSL v1
+
+Copyright: Copyright (c) [2019] [Fudan Microelectronics]
+
+Path:
+
+- bsp/fm33lc026\libraries\FM33LC0xx_FL_Driver
+- bsp/fm33lc026\libraries\FM
+
 ### frdm-k64f
 
 License: bsd-new

bsp/fm33lc026/.config

+#
+# Automatically generated file; DO NOT EDIT.
+# RT-Thread Configuration
+#
+
+#
+# RT-Thread Kernel
+#
+CONFIG_RT_NAME_MAX=8
+# CONFIG_RT_USING_ARCH_DATA_TYPE is not set
+# CONFIG_RT_USING_SMP is not set
+CONFIG_RT_ALIGN_SIZE=4
+# CONFIG_RT_THREAD_PRIORITY_8 is not set
+CONFIG_RT_THREAD_PRIORITY_32=y
+# CONFIG_RT_THREAD_PRIORITY_256 is not set
+CONFIG_RT_THREAD_PRIORITY_MAX=32
+CONFIG_RT_TICK_PER_SECOND=500
+CONFIG_RT_USING_OVERFLOW_CHECK=y
+CONFIG_RT_USING_HOOK=y
+CONFIG_RT_USING_IDLE_HOOK=y
+CONFIG_RT_IDLE_HOOK_LIST_SIZE=4
+CONFIG_IDLE_THREAD_STACK_SIZE=256
+# CONFIG_RT_USING_TIMER_SOFT is not set
+
+#
+# kservice optimization
+#
+# CONFIG_RT_KSERVICE_USING_STDLIB is not set
+# CONFIG_RT_KSERVICE_USING_TINY_SIZE is not set
+# CONFIG_RT_USING_ASM_MEMCPY is not set
+CONFIG_RT_DEBUG=y
+CONFIG_RT_DEBUG_COLOR=y
+# CONFIG_RT_DEBUG_INIT_CONFIG is not set
+# CONFIG_RT_DEBUG_THREAD_CONFIG is not set
+# CONFIG_RT_DEBUG_SCHEDULER_CONFIG is not set
+# CONFIG_RT_DEBUG_IPC_CONFIG is not set
+# CONFIG_RT_DEBUG_TIMER_CONFIG is not set
+# CONFIG_RT_DEBUG_IRQ_CONFIG is not set
+# CONFIG_RT_DEBUG_MEM_CONFIG is not set
+# CONFIG_RT_DEBUG_SLAB_CONFIG is not set
+# CONFIG_RT_DEBUG_MEMHEAP_CONFIG is not set
+# CONFIG_RT_DEBUG_MODULE_CONFIG is not set
+
+#
+# Inter-Thread communication
+#
+CONFIG_RT_USING_SEMAPHORE=y
+CONFIG_RT_USING_MUTEX=y
+CONFIG_RT_USING_EVENT=y
+CONFIG_RT_USING_MAILBOX=y
+CONFIG_RT_USING_MESSAGEQUEUE=y
+# CONFIG_RT_USING_SIGNALS is not set
+
+#
+# Memory Management
+#
+CONFIG_RT_USING_MEMPOOL=y
+# CONFIG_RT_USING_MEMHEAP is not set
+# CONFIG_RT_USING_NOHEAP is not set
+CONFIG_RT_USING_SMALL_MEM=y
+# CONFIG_RT_USING_SLAB is not set
+# CONFIG_RT_USING_USERHEAP is not set
+# CONFIG_RT_USING_MEMTRACE is not set
+CONFIG_RT_USING_HEAP=y
+
+#
+# Kernel Device Object
+#
+CONFIG_RT_USING_DEVICE=y
+# CONFIG_RT_USING_DEVICE_OPS is not set
+# CONFIG_RT_USING_INTERRUPT_INFO is not set
+CONFIG_RT_USING_CONSOLE=y
+CONFIG_RT_CONSOLEBUF_SIZE=128
+CONFIG_RT_CONSOLE_DEVICE_NAME="uart4"
+# CONFIG_RT_PRINTF_LONGLONG is not set
+CONFIG_RT_VER_NUM=0x40004
+CONFIG_ARCH_ARM=y
+# CONFIG_RT_USING_CPU_FFS is not set
+CONFIG_ARCH_ARM_CORTEX_M=y
+CONFIG_ARCH_ARM_CORTEX_M0=y
+# CONFIG_ARCH_CPU_STACK_GROWS_UPWARD is not set
+
+#
+# RT-Thread Components
+#
+CONFIG_RT_USING_COMPONENTS_INIT=y
+CONFIG_RT_USING_USER_MAIN=y
+CONFIG_RT_MAIN_THREAD_STACK_SIZE=2048
+CONFIG_RT_MAIN_THREAD_PRIORITY=10
+
+#
+# C++ features
+#
+# CONFIG_RT_USING_CPLUSPLUS is not set
+
+#
+# Command shell
+#
+CONFIG_RT_USING_FINSH=y
+CONFIG_FINSH_THREAD_NAME="tshell"
+CONFIG_FINSH_USING_HISTORY=y
+CONFIG_FINSH_HISTORY_LINES=5
+CONFIG_FINSH_USING_SYMTAB=y
+CONFIG_FINSH_USING_DESCRIPTION=y
+# CONFIG_FINSH_ECHO_DISABLE_DEFAULT is not set
+CONFIG_FINSH_THREAD_PRIORITY=20
+CONFIG_FINSH_THREAD_STACK_SIZE=4096
+CONFIG_FINSH_CMD_SIZE=80
+# CONFIG_FINSH_USING_AUTH is not set
+CONFIG_FINSH_USING_MSH=y
+CONFIG_FINSH_USING_MSH_DEFAULT=y
+# CONFIG_FINSH_USING_MSH_ONLY is not set
+CONFIG_FINSH_ARG_MAX=10
+
+#
+# Device virtual file system
+#
+# CONFIG_RT_USING_DFS is not set
+
+#
+# Device Drivers
+#
+CONFIG_RT_USING_DEVICE_IPC=y
+CONFIG_RT_PIPE_BUFSZ=512
+# CONFIG_RT_USING_SYSTEM_WORKQUEUE is not set
+CONFIG_RT_USING_SERIAL=y
+CONFIG_RT_USING_SERIAL_V1=y
+# CONFIG_RT_USING_SERIAL_V2 is not set
+# CONFIG_RT_SERIAL_USING_DMA is not set
+CONFIG_RT_SERIAL_RB_BUFSZ=64
+# CONFIG_RT_USING_CAN is not set
+# CONFIG_RT_USING_HWTIMER is not set
+# CONFIG_RT_USING_CPUTIME is not set
+# CONFIG_RT_USING_I2C is not set
+# CONFIG_RT_USING_PHY is not set
+# CONFIG_RT_USING_PIN is not set
+# CONFIG_RT_USING_ADC is not set
+# CONFIG_RT_USING_DAC is not set
+# CONFIG_RT_USING_PWM is not set
+# CONFIG_RT_USING_MTD_NOR is not set
+# CONFIG_RT_USING_MTD_NAND is not set
+# CONFIG_RT_USING_PM is not set
+# CONFIG_RT_USING_RTC is not set
+# CONFIG_RT_USING_SDIO is not set
+# CONFIG_RT_USING_SPI is not set
+# CONFIG_RT_USING_WDT is not set
+# CONFIG_RT_USING_AUDIO is not set
+# CONFIG_RT_USING_SENSOR is not set
+# CONFIG_RT_USING_TOUCH is not set
+# CONFIG_RT_USING_HWCRYPTO is not set
+# CONFIG_RT_USING_PULSE_ENCODER is not set
+# CONFIG_RT_USING_INPUT_CAPTURE is not set
+# CONFIG_RT_USING_WIFI is not set
+
+#
+# Using USB
+#
+# CONFIG_RT_USING_USB_HOST is not set
+# CONFIG_RT_USING_USB_DEVICE is not set
+
+#
+# POSIX layer and C standard library
+#
+# CONFIG_RT_USING_LIBC is not set
+# CONFIG_RT_USING_PTHREADS is not set
+# CONFIG_RT_LIBC_USING_TIME is not set
+
+#
+# Network
+#
+
+#
+# Socket abstraction layer
+#
+# CONFIG_RT_USING_SAL is not set
+
+#
+# Network interface device
+#
+# CONFIG_RT_USING_NETDEV is not set
+
+#
+# light weight TCP/IP stack
+#
+# CONFIG_RT_USING_LWIP is not set
+
+#
+# AT commands
+#
+# CONFIG_RT_USING_AT is not set
+
+#
+# VBUS(Virtual Software BUS)
+#
+# CONFIG_RT_USING_VBUS is not set
+
+#
+# Utilities
+#
+# CONFIG_RT_USING_RYM is not set
+# CONFIG_RT_USING_ULOG is not set
+# CONFIG_RT_USING_UTEST is not set
+# CONFIG_RT_USING_RT_LINK is not set
+# CONFIG_RT_USING_LWP is not set
+
+#
+# RT-Thread Utestcases
+#
+# CONFIG_RT_USING_UTESTCASES is not set
+
+#
+# RT-Thread online packages
+#
+
+#
+# IoT - internet of things
+#
+# CONFIG_PKG_USING_LORAWAN_DRIVER is not set
+# CONFIG_PKG_USING_PAHOMQTT is not set
+# CONFIG_PKG_USING_UMQTT is not set
+# CONFIG_PKG_USING_WEBCLIENT is not set
+# CONFIG_PKG_USING_WEBNET is not set
+# CONFIG_PKG_USING_MONGOOSE is not set
+# CONFIG_PKG_USING_MYMQTT is not set
+# CONFIG_PKG_USING_KAWAII_MQTT is not set
+# CONFIG_PKG_USING_BC28_MQTT is not set
+# CONFIG_PKG_USING_WEBTERMINAL is not set
+# CONFIG_PKG_USING_CJSON is not set
+# CONFIG_PKG_USING_JSMN is not set
+# CONFIG_PKG_USING_LIBMODBUS is not set
+# CONFIG_PKG_USING_FREEMODBUS is not set
+# CONFIG_PKG_USING_LJSON is not set
+# CONFIG_PKG_USING_EZXML is not set
+# CONFIG_PKG_USING_NANOPB is not set
+
+#
+# Wi-Fi
+#
+
+#
+# Marvell WiFi
+#
+# CONFIG_PKG_USING_WLANMARVELL is not set
+
+#
+# Wiced WiFi
+#
+# CONFIG_PKG_USING_WLAN_WICED is not set
+# CONFIG_PKG_USING_RW007 is not set
+# CONFIG_PKG_USING_COAP is not set
+# CONFIG_PKG_USING_NOPOLL is not set
+# CONFIG_PKG_USING_NETUTILS is not set
+# CONFIG_PKG_USING_CMUX is not set
+# CONFIG_PKG_USING_PPP_DEVICE is not set
+# CONFIG_PKG_USING_AT_DEVICE is not set
+# CONFIG_PKG_USING_ATSRV_SOCKET is not set
+# CONFIG_PKG_USING_WIZNET is not set
+
+#
+# IoT Cloud
+#
+# CONFIG_PKG_USING_ONENET is not set
+# CONFIG_PKG_USING_GAGENT_CLOUD is not set
+# CONFIG_PKG_USING_ALI_IOTKIT is not set
+# CONFIG_PKG_USING_AZURE is not set
+# CONFIG_PKG_USING_TENCENT_IOT_EXPLORER is not set
+# CONFIG_PKG_USING_JIOT-C-SDK is not set
+# CONFIG_PKG_USING_UCLOUD_IOT_SDK is not set
+# CONFIG_PKG_USING_JOYLINK is not set
+# CONFIG_PKG_USING_NIMBLE is not set
+# CONFIG_PKG_USING_OTA_DOWNLOADER is not set
+# CONFIG_PKG_USING_IPMSG is not set
+# CONFIG_PKG_USING_LSSDP is not set
+# CONFIG_PKG_USING_AIRKISS_OPEN is not set
+# CONFIG_PKG_USING_LIBRWS is not set
+# CONFIG_PKG_USING_TCPSERVER is not set
+# CONFIG_PKG_USING_PROTOBUF_C is not set
+# CONFIG_PKG_USING_DLT645 is not set
+# CONFIG_PKG_USING_QXWZ is not set
+# CONFIG_PKG_USING_SMTP_CLIENT is not set
+# CONFIG_PKG_USING_ABUP_FOTA is not set
+# CONFIG_PKG_USING_LIBCURL2RTT is not set
+# CONFIG_PKG_USING_CAPNP is not set
+# CONFIG_PKG_USING_RT_CJSON_TOOLS is not set
+# CONFIG_PKG_USING_AGILE_TELNET is not set
+# CONFIG_PKG_USING_NMEALIB is not set
+# CONFIG_PKG_USING_AGILE_JSMN is not set
+# CONFIG_PKG_USING_PDULIB is not set
+# CONFIG_PKG_USING_BTSTACK is not set
+# CONFIG_PKG_USING_LORAWAN_ED_STACK is not set
+# CONFIG_PKG_USING_WAYZ_IOTKIT is not set
+# CONFIG_PKG_USING_MAVLINK is not set
+# CONFIG_PKG_USING_RAPIDJSON is not set
+
+#
+# security packages
+#
+# CONFIG_PKG_USING_MBEDTLS is not set
+# CONFIG_PKG_USING_libsodium is not set
+# CONFIG_PKG_USING_TINYCRYPT is not set
+# CONFIG_PKG_USING_TFM is not set
+# CONFIG_PKG_USING_YD_CRYPTO is not set
+
+#
+# language packages
+#
+# CONFIG_PKG_USING_LUA is not set
+# CONFIG_PKG_USING_JERRYSCRIPT is not set
+# CONFIG_PKG_USING_MICROPYTHON is not set
+
+#
+# multimedia packages
+#
+# CONFIG_PKG_USING_OPENMV is not set
+# CONFIG_PKG_USING_MUPDF is not set
+# CONFIG_PKG_USING_STEMWIN is not set
+# CONFIG_PKG_USING_WAVPLAYER is not set
+# CONFIG_PKG_USING_TJPGD is not set
+# CONFIG_PKG_USING_HELIX is not set
+# CONFIG_PKG_USING_AZUREGUIX is not set
+# CONFIG_PKG_USING_TOUCHGFX2RTT is not set
+
+#
+# tools packages
+#
+# CONFIG_PKG_USING_CMBACKTRACE is not set
+# CONFIG_PKG_USING_EASYFLASH is not set
+# CONFIG_PKG_USING_EASYLOGGER is not set
+# CONFIG_PKG_USING_SYSTEMVIEW is not set
+# CONFIG_PKG_USING_RDB is not set
+# CONFIG_PKG_USING_QRCODE is not set
+# CONFIG_PKG_USING_ULOG_EASYFLASH is not set
+# CONFIG_PKG_USING_ULOG_FILE is not set
+# CONFIG_PKG_USING_LOGMGR is not set
+# CONFIG_PKG_USING_ADBD is not set
+# CONFIG_PKG_USING_COREMARK is not set
+# CONFIG_PKG_USING_DHRYSTONE is not set
+# CONFIG_PKG_USING_MEMORYPERF is not set
+# CONFIG_PKG_USING_NR_MICRO_SHELL is not set
+# CONFIG_PKG_USING_CHINESE_FONT_LIBRARY is not set
+# CONFIG_PKG_USING_LUNAR_CALENDAR is not set
+# CONFIG_PKG_USING_BS8116A is not set
+# CONFIG_PKG_USING_GPS_RMC is not set
+# CONFIG_PKG_USING_URLENCODE is not set
+# CONFIG_PKG_USING_UMCN is not set
+# CONFIG_PKG_USING_LWRB2RTT is not set
+# CONFIG_PKG_USING_CPU_USAGE is not set
+# CONFIG_PKG_USING_GBK2UTF8 is not set
+# CONFIG_PKG_USING_VCONSOLE is not set
+# CONFIG_PKG_USING_KDB is not set
+# CONFIG_PKG_USING_WAMR is not set
+# CONFIG_PKG_USING_MICRO_XRCE_DDS_CLIENT is not set
+# CONFIG_PKG_USING_LWLOG is not set
+# CONFIG_PKG_USING_ANV_TRACE is not set
+# CONFIG_PKG_USING_ANV_MEMLEAK is not set
+# CONFIG_PKG_USING_ANV_TESTSUIT is not set
+# CONFIG_PKG_USING_ANV_BENCH is not set
+
+#
+# system packages
+#
+# CONFIG_PKG_USING_GUIENGINE is not set
+# CONFIG_PKG_USING_CAIRO is not set
+# CONFIG_PKG_USING_PIXMAN is not set
+# CONFIG_PKG_USING_LWEXT4 is not set
+# CONFIG_PKG_USING_PARTITION is not set
+# CONFIG_PKG_USING_FAL is not set
+# CONFIG_PKG_USING_FLASHDB is not set
+# CONFIG_PKG_USING_SQLITE is not set
+# CONFIG_PKG_USING_RTI is not set
+# CONFIG_PKG_USING_LITTLEVGL2RTT is not set
+# CONFIG_PKG_USING_CMSIS is not set
+# CONFIG_PKG_USING_DFS_YAFFS is not set
+# CONFIG_PKG_USING_LITTLEFS is not set
+# CONFIG_PKG_USING_DFS_JFFS2 is not set
+# CONFIG_PKG_USING_DFS_UFFS is not set
+# CONFIG_PKG_USING_THREAD_POOL is not set
+# CONFIG_PKG_USING_ROBOTS is not set
+# CONFIG_PKG_USING_EV is not set
+# CONFIG_PKG_USING_SYSWATCH is not set
+# CONFIG_PKG_USING_SYS_LOAD_MONITOR is not set
+# CONFIG_PKG_USING_PLCCORE is not set
+# CONFIG_PKG_USING_RAMDISK is not set
+# CONFIG_PKG_USING_MININI is not set
+# CONFIG_PKG_USING_QBOOT is not set
+
+#
+# Micrium: Micrium software products porting for RT-Thread
+#
+# CONFIG_PKG_USING_UCOSIII_WRAPPER is not set
+# CONFIG_PKG_USING_UCOSII_WRAPPER is not set
+# CONFIG_PKG_USING_UC_CRC is not set
+# CONFIG_PKG_USING_UC_CLK is not set
+# CONFIG_PKG_USING_UC_COMMON is not set
+# CONFIG_PKG_USING_UC_MODBUS is not set
+# CONFIG_PKG_USING_PPOOL is not set
+# CONFIG_PKG_USING_OPENAMP is not set
+# CONFIG_PKG_USING_RT_KPRINTF_THREADSAFE is not set
+# CONFIG_PKG_USING_RT_MEMCPY_CM is not set
+# CONFIG_PKG_USING_QFPLIB_M0_FULL is not set
+# CONFIG_PKG_USING_QFPLIB_M0_TINY is not set
+# CONFIG_PKG_USING_QFPLIB_M3 is not set
+# CONFIG_PKG_USING_LPM is not set
+
+#
+# peripheral libraries and drivers
+#
+# CONFIG_PKG_USING_SENSORS_DRIVERS is not set
+# CONFIG_PKG_USING_REALTEK_AMEBA is not set
+# CONFIG_PKG_USING_SHT2X is not set
+# CONFIG_PKG_USING_SHT3X is not set
+# CONFIG_PKG_USING_AS7341 is not set
+# CONFIG_PKG_USING_STM32_SDIO is not set
+# CONFIG_PKG_USING_ICM20608 is not set
+# CONFIG_PKG_USING_U8G2 is not set
+# CONFIG_PKG_USING_BUTTON is not set
+# CONFIG_PKG_USING_PCF8574 is not set
+# CONFIG_PKG_USING_SX12XX is not set
+# CONFIG_PKG_USING_SIGNAL_LED is not set
+# CONFIG_PKG_USING_LEDBLINK is not set
+# CONFIG_PKG_USING_LITTLED is not set
+# CONFIG_PKG_USING_LKDGUI is not set
+# CONFIG_PKG_USING_NRF5X_SDK is not set
+# CONFIG_PKG_USING_NRFX is not set
+# CONFIG_PKG_USING_WM_LIBRARIES is not set
+# CONFIG_PKG_USING_KENDRYTE_SDK is not set
+# CONFIG_PKG_USING_INFRARED is not set
+# CONFIG_PKG_USING_ROSSERIAL is not set
+# CONFIG_PKG_USING_AGILE_BUTTON is not set
+# CONFIG_PKG_USING_AGILE_LED is not set
+# CONFIG_PKG_USING_AT24CXX is not set
+# CONFIG_PKG_USING_MOTIONDRIVER2RTT is not set
+# CONFIG_PKG_USING_AD7746 is not set
+# CONFIG_PKG_USING_PCA9685 is not set
+# CONFIG_PKG_USING_I2C_TOOLS is not set
+# CONFIG_PKG_USING_NRF24L01 is not set
+# CONFIG_PKG_USING_TOUCH_DRIVERS is not set
+# CONFIG_PKG_USING_MAX17048 is not set
+# CONFIG_PKG_USING_RPLIDAR is not set
+# CONFIG_PKG_USING_AS608 is not set
+# CONFIG_PKG_USING_RC522 is not set
+# CONFIG_PKG_USING_WS2812B is not set
+# CONFIG_PKG_USING_EMBARC_BSP is not set
+# CONFIG_PKG_USING_EXTERN_RTC_DRIVERS is not set
+# CONFIG_PKG_USING_MULTI_RTIMER is not set
+# CONFIG_PKG_USING_MAX7219 is not set
+# CONFIG_PKG_USING_BEEP is not set
+# CONFIG_PKG_USING_EASYBLINK is not set
+# CONFIG_PKG_USING_PMS_SERIES is not set
+# CONFIG_PKG_USING_CAN_YMODEM is not set
+# CONFIG_PKG_USING_LORA_RADIO_DRIVER is not set
+# CONFIG_PKG_USING_QLED is not set
+# CONFIG_PKG_USING_PAJ7620 is not set
+# CONFIG_PKG_USING_AGILE_CONSOLE is not set
+# CONFIG_PKG_USING_LD3320 is not set
+# CONFIG_PKG_USING_WK2124 is not set
+# CONFIG_PKG_USING_LY68L6400 is not set
+# CONFIG_PKG_USING_DM9051 is not set
+# CONFIG_PKG_USING_SSD1306 is not set
+# CONFIG_PKG_USING_QKEY is not set
+# CONFIG_PKG_USING_RS485 is not set
+# CONFIG_PKG_USING_NES is not set
+# CONFIG_PKG_USING_VIRTUAL_SENSOR is not set
+# CONFIG_PKG_USING_VDEVICE is not set
+# CONFIG_PKG_USING_SGM706 is not set
+# CONFIG_PKG_USING_RDA58XX is not set
+
+#
+# AI packages
+#
+# CONFIG_PKG_USING_LIBANN is not set
+# CONFIG_PKG_USING_NNOM is not set
+# CONFIG_PKG_USING_ONNX_BACKEND is not set
+# CONFIG_PKG_USING_ONNX_PARSER is not set
+# CONFIG_PKG_USING_TENSORFLOWLITEMICRO is not set
+# CONFIG_PKG_USING_ELAPACK is not set
+# CONFIG_PKG_USING_ULAPACK is not set
+# CONFIG_PKG_USING_QUEST is not set
+
+#
+# miscellaneous packages
+#
+# CONFIG_PKG_USING_LIBCSV is not set
+# CONFIG_PKG_USING_OPTPARSE is not set
+# CONFIG_PKG_USING_FASTLZ is not set
+# CONFIG_PKG_USING_MINILZO is not set
+# CONFIG_PKG_USING_QUICKLZ is not set
+# CONFIG_PKG_USING_LZMA is not set
+# CONFIG_PKG_USING_MULTIBUTTON is not set
+# CONFIG_PKG_USING_FLEXIBLE_BUTTON is not set
+# CONFIG_PKG_USING_CANFESTIVAL is not set
+# CONFIG_PKG_USING_ZLIB is not set
+# CONFIG_PKG_USING_DSTR is not set
+# CONFIG_PKG_USING_TINYFRAME is not set
+# CONFIG_PKG_USING_KENDRYTE_DEMO is not set
+# CONFIG_PKG_USING_DIGITALCTRL is not set
+# CONFIG_PKG_USING_UPACKER is not set
+# CONFIG_PKG_USING_UPARAM is not set
+
+#
+# samples: kernel and components samples
+#
+# CONFIG_PKG_USING_KERNEL_SAMPLES is not set
+# CONFIG_PKG_USING_FILESYSTEM_SAMPLES is not set
+# CONFIG_PKG_USING_NETWORK_SAMPLES is not set
+# CONFIG_PKG_USING_PERIPHERAL_SAMPLES is not set
+# CONFIG_PKG_USING_HELLO is not set
+# CONFIG_PKG_USING_VI is not set
+# CONFIG_PKG_USING_KI is not set
+# CONFIG_PKG_USING_ARMv7M_DWT is not set
+# CONFIG_PKG_USING_VT100 is not set
+# CONFIG_PKG_USING_UKAL is not set
+# CONFIG_PKG_USING_CRCLIB is not set
+
+#
+# games: games run on RT-Thread console
+#
+# CONFIG_PKG_USING_THREES is not set
+# CONFIG_PKG_USING_2048 is not set
+# CONFIG_PKG_USING_SNAKE is not set
+# CONFIG_PKG_USING_TETRIS is not set
+# CONFIG_PKG_USING_LWGPS is not set
+# CONFIG_PKG_USING_STATE_MACHINE is not set
+# CONFIG_PKG_USING_MCURSES is not set
+# CONFIG_PKG_USING_COWSAY is not set
+CONFIG_SOC_FAMILY_FM33=y
+CONFIG_SOC_SERIES_FM33LC0XX=y
+
+#
+# Hardware Drivers Config
+#
+CONFIG_SOC_FM33LC0XX=y
+
+#
+# On-chip Peripheral Drivers
+#
+CONFIG_BSP_USING_UART=y
+CONFIG_BSP_USING_UART0=y
+CONFIG_BSP_USING_UART1=y
+CONFIG_BSP_USING_UART4=y
+# CONFIG_BSP_USING_UART5 is not set

bsp/fm33lc026/Kconfig

+mainmenu "RT-Thread Configuration"
+
+config BSP_DIR
+    string
+    option env="BSP_ROOT"
+    default "."
+
+config RTT_DIR
+    string
+    option env="RTT_ROOT"
+    default "../.."
+
+config PKGS_DIR
+    string
+    option env="PKGS_ROOT"
+    default "packages"
+
+source "$RTT_DIR/Kconfig"
+source "$PKGS_DIR/Kconfig"
+source "libraries/Kconfig"
+source "board/Kconfig"
+

bsp/fm33lc026/README.md

+# FM33LC026 #
+
+## 1. 简介
+
+[FM33LC026](开发者论坛：http://www.fmdevelopers.com.cn/forum.php)是复旦微的MCU，使用 Cortex-M0 内核。该BSP基于FM026开发调试，LC0XX系列通用，重新选择型号即可，可能需要改变部分引脚定义。
+FM33LC0xxx系列低功耗MCU，基于ARM Cortex-M0内核，集成大容量嵌入式闪存，具备丰富的模拟和数字外设，并具有优异的低功耗特性。FM33LC0xxx系列包含三个子系列，分别为支持无晶振USB FS device的FM33LC0xxU系列，和不支持USB的FM33LC0xxN系列，以及FM33LC0x4NR系列。
+主要资源如下：
+
+| 硬件 | 描述 |
+| -- | -- |
+|CPU| Cortex-M0|
+|主频| 64MHz |
+|SRAM| 24KB |
+|Flash| 128KB |
+
+## 2. 编译说明
+
+只适配了MDK5，使用MDK5编译。
+
+| IDE/编译器 | 已测试版本 |
+| -- | -- |
+| MDK5 | MDK5.27 | 
+
+## 3. 烧写及执行
+
+下载程序：使用 J-Link 工具。
+
+### 3.1 配置和仿真
+
+工程已经默认使能了RT-Thread UART驱动。若想进一步配置工程请
+使用ENV工具。
+
+## 4. 驱动支持情况及计划
+
+| 驱动 | 支持情况  |  备注  |
+| ------ | ----  | :------:  |
+| UART | 支持 | USART0/1/4/5 |
+
+## 5. 联系人信息
+
+维护人：
+
+- [jqj96](https://github.com/jqj96)
+
+## 6. 参考
+

bsp/fm33lc026/SConscript

+# for module compiling
+import os
+Import('RTT_ROOT')
+from building import *
+
+cwd = GetCurrentDir()
+objs = []
+list = os.listdir(cwd)
+
+for d in list:
+    path = os.path.join(cwd, d)
+    if os.path.isfile(os.path.join(path, 'SConscript')):
+        objs = objs + SConscript(os.path.join(d, 'SConscript'))
+
+Return('objs')

bsp/fm33lc026/SConstruct

+import os
+import sys
+import rtconfig
+
+if os.getenv('RTT_ROOT'):
+    RTT_ROOT = os.getenv('RTT_ROOT')
+else:
+    RTT_ROOT = os.path.normpath(os.getcwd() + '/../..')
+
+sys.path = sys.path + [os.path.join(RTT_ROOT, 'tools')]
+try:
+    from building import *
+except:
+    print('Cannot found RT-Thread root directory, please check RTT_ROOT')
+    print(RTT_ROOT)
+    exit(-1)
+
+TARGET = 'rt-thread.' + rtconfig.TARGET_EXT
+
+DefaultEnvironment(tools=[])
+env = Environment(tools = ['mingw'],
+    AS = rtconfig.AS, ASFLAGS = rtconfig.AFLAGS,
+    CC = rtconfig.CC, CCFLAGS = rtconfig.CFLAGS,
+    AR = rtconfig.AR, ARFLAGS = '-rc',
+    CXX = rtconfig.CXX, CXXFLAGS = rtconfig.CXXFLAGS,
+    LINK = rtconfig.LINK, LINKFLAGS = rtconfig.LFLAGS)
+env.PrependENVPath('PATH', rtconfig.EXEC_PATH)
+
+if rtconfig.PLATFORM == 'iar':
+    env.Replace(CCCOM = ['$CC $CCFLAGS $CPPFLAGS $_CPPDEFFLAGS $_CPPINCFLAGS -o $TARGET $SOURCES'])
+    env.Replace(ARFLAGS = [''])
+    env.Replace(LINKCOM = ['$LINK $SOURCES $LINKFLAGS -o $TARGET --map rt-thread.map'])
+
+Export('RTT_ROOT')
+Export('rtconfig')
+
+SDK_ROOT = os.path.abspath('./')
+
+if os.path.exists(SDK_ROOT + '/libraries'):
+    libraries_path_prefix = SDK_ROOT + '/libraries'
+else:
+    libraries_path_prefix = os.path.dirname(SDK_ROOT) + '/libraries'
+
+SDK_LIB = libraries_path_prefix
+Export('SDK_LIB')
+
+# prepare building environment
+objs = PrepareBuilding(env, RTT_ROOT, has_libcpu=False)
+
+fm33_library = 'FM33LC0xx_FL_Driver'
+rtconfig.BSP_LIBRARY_TYPE = fm33_library
+
+# include libraries
+objs.extend(SConscript(os.path.join(libraries_path_prefix, fm33_library, 'SConscript')))
+
+# include drivers
+objs.extend(SConscript(os.path.join(libraries_path_prefix, 'HAL_Drivers', 'SConscript')))
+
+# make a building
+DoBuilding(TARGET, objs)

bsp/fm33lc026/applications/SConscript

+from building import *
+
+cwd = GetCurrentDir()
+src = Glob('*.c') + Glob('*.cpp')
+CPPPATH = [cwd]
+
+group = DefineGroup('Applications', src, depend = [''], CPPPATH = CPPPATH)
+
+Return('group')

bsp/fm33lc026/applications/main.c

+/*
+ * Copyright (c) 2006-2018, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2021-08-27     Jiao         first version
+ */
+
+#include <rtthread.h>
+#include "board.h"
+
+int main(void)
+{
+    FL_GPIO_InitTypeDef GPIO_InitStruct = {0};
+
+    FL_GPIO_SetOutputPin(GPIOD, FL_GPIO_PIN_4);
+    GPIO_InitStruct.pin = FL_GPIO_PIN_4;
+    GPIO_InitStruct.mode = FL_GPIO_MODE_OUTPUT;
+    GPIO_InitStruct.outputType = FL_GPIO_OUTPUT_PUSHPULL;
+    GPIO_InitStruct.pull = FL_DISABLE;
+    FL_GPIO_Init(GPIOD, &GPIO_InitStruct);
+    while (1)
+    {
+        FL_GPIO_SetOutputPin(GPIOD, FL_GPIO_PIN_4);
+        rt_thread_mdelay(500);
+        FL_GPIO_ResetOutputPin(GPIOD, FL_GPIO_PIN_4);
+        rt_thread_mdelay(500);
+    }
+
+}

bsp/fm33lc026/board/Kconfig

+menu "Hardware Drivers Config"
+
+config SOC_FM33LC0XX
+    bool
+    select SOC_SERIES_FM33LC0XX
+    select RT_USING_COMPONENTS_INIT
+    select RT_USING_USER_MAIN
+    default y
+
+menu "On-chip Peripheral Drivers"
+
+    menuconfig BSP_USING_UART
+        bool "Enable UART"
+        default y
+        select RT_USING_SERIAL
+        if BSP_USING_UART
+            config BSP_USING_UART0
+                bool "Enable UART0"
+                default n
+
+            config BSP_USING_UART1
+                bool "Enable UART1"
+                default y
+
+            config BSP_USING_UART4
+                bool "Enable UART4"
+                default n
+
+            config BSP_USING_UART5
+                bool "Enable UART5"
+                default y
+        endif
+    source "libraries/HAL_Drivers/Kconfig"
+    
+endmenu
+
+
+endmenu

bsp/fm33lc026/board/SConscript

+import os
+import rtconfig
+from building import *
+
+Import('SDK_LIB')
+
+cwd = GetCurrentDir()
+
+# add general drivers
+src = Split('''
+board.c
+''')
+
+path =  [cwd]
+
+startup_path_prefix = SDK_LIB
+
+if rtconfig.CROSS_TOOL == 'gcc':
+    src += [startup_path_prefix + '/FM/FM33xx/Source/Templates/gcc/startup_fm33lc0xx.s']
+elif rtconfig.CROSS_TOOL == 'keil':
+    src += [startup_path_prefix + '/FM/FM33xx/Source/Templates/ARM/startup_fm33lc0xx.s']
+elif rtconfig.CROSS_TOOL == 'iar':
+    src += [startup_path_prefix + '/FM/FM33xx/Source/Templates/iar/startup_fm33lc0xx.s']
+
+# FM33LC0XX
+# You can select chips from the list above
+CPPDEFINES = ['FM33LC0XX']
+group = DefineGroup('Drivers', src, depend = [''], CPPPATH = path, CPPDEFINES = CPPDEFINES)
+Return('group')

bsp/fm33lc026/board/board.c

+/*
+ * Copyright (c) 2006-2018, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2021-08-27     Jiao         first version
+ */
+
+#include "board.h"
+
+FL_ErrorStatus FL_UART_GPIO_Init(UART_Type *UARTx)
+{
+    FL_ErrorStatus status = FL_FAIL;
+    FL_GPIO_InitTypeDef    GPIO_InitStruct;
+    if (UARTx ==  UART0)
+    {
+        GPIO_InitStruct.pin = FL_GPIO_PIN_13;
+        GPIO_InitStruct.mode = FL_GPIO_MODE_DIGITAL;
+        GPIO_InitStruct.outputType = FL_GPIO_OUTPUT_PUSHPULL;
+        GPIO_InitStruct.pull = FL_DISABLE;
+        GPIO_InitStruct.remapPin = FL_DISABLE;
+
+        status = FL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+
+        GPIO_InitStruct.pin = FL_GPIO_PIN_14;
+        GPIO_InitStruct.mode = FL_GPIO_MODE_DIGITAL;
+        GPIO_InitStruct.outputType = FL_GPIO_OUTPUT_PUSHPULL;
+        GPIO_InitStruct.pull = FL_DISABLE;
+        GPIO_InitStruct.remapPin = FL_DISABLE;
+
+        status = FL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+    }
+    else if (UARTx ==  UART1)
+    {
+        GPIO_InitStruct.pin = FL_GPIO_PIN_13;
+        GPIO_InitStruct.mode = FL_GPIO_MODE_DIGITAL;
+        GPIO_InitStruct.outputType = FL_GPIO_OUTPUT_PUSHPULL;
+        GPIO_InitStruct.pull = FL_DISABLE;
+        GPIO_InitStruct.remapPin = FL_DISABLE;
+
+        status = FL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+
+        GPIO_InitStruct.pin = FL_GPIO_PIN_14;
+        GPIO_InitStruct.mode = FL_GPIO_MODE_DIGITAL;
+        GPIO_InitStruct.outputType = FL_GPIO_OUTPUT_PUSHPULL;
+        GPIO_InitStruct.pull = FL_DISABLE;
+        GPIO_InitStruct.remapPin = FL_DISABLE;
+
+        status = FL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+    }
+    else if (UARTx ==  UART4)
+    {
+        GPIO_InitStruct.pin = FL_GPIO_PIN_0;
+        GPIO_InitStruct.mode = FL_GPIO_MODE_DIGITAL;
+        GPIO_InitStruct.outputType = FL_GPIO_OUTPUT_PUSHPULL;
+        GPIO_InitStruct.pull = FL_DISABLE;
+        GPIO_InitStruct.remapPin = FL_DISABLE;
+
+        status = FL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+
+        GPIO_InitStruct.pin = FL_GPIO_PIN_1;
+        GPIO_InitStruct.mode = FL_GPIO_MODE_DIGITAL;
+        GPIO_InitStruct.outputType = FL_GPIO_OUTPUT_PUSHPULL;
+        GPIO_InitStruct.pull = FL_DISABLE;
+        GPIO_InitStruct.remapPin = FL_DISABLE;
+
+        status = FL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+    }
+    return status;
+}
+
+
+
+static void RCC_PLL_ConfigDomain_SYS(uint32_t Source, uint32_t PLL_R, uint32_t PLL_DB, uint32_t PLL_O)
+{
+    MODIFY_REG(RCC->PLLCR, RCC_PLLCR_DB_Msk | RCC_PLLCR_REFPRSC_Msk | RCC_PLLCR_OSEL_Msk | RCC_PLLCR_INSEL_Msk,
+               (PLL_DB << RCC_PLLCR_DB_Pos) | PLL_R | PLL_O | Source);
+}
+
+static void RCHFInit(uint32_t clock)
+{
+    switch (clock)
+    {
+    case FL_RCC_RCHF_FREQUENCY_8MHZ:
+        FL_RCC_RCHF_WriteTrimValue(RCHF8M_TRIM);
+        break;
+
+    case FL_RCC_RCHF_FREQUENCY_16MHZ:
+        FL_RCC_RCHF_WriteTrimValue(RCHF16M_TRIM);
+        break;
+
+    case FL_RCC_RCHF_FREQUENCY_24MHZ:
+        FL_RCC_RCHF_WriteTrimValue(RCHF24M_TRIM);
+        break;
+
+    default:
+        FL_RCC_RCHF_WriteTrimValue(RCHF8M_TRIM);
+        break;
+    }
+
+    FL_RCC_RCHF_SetFrequency(clock);
+}
+
+void SelRCHFToPLL(uint32_t rchf, uint32_t clock)
+{
+    uint32_t div = FL_RCC_PLL_PSC_DIV8;
+
+    if (clock > 64)
+    {
+        return;
+    }
+
+    RCHFInit(rchf);
+
+    switch (rchf)
+    {
+    case FL_RCC_RCHF_FREQUENCY_16MHZ:
+        div = FL_RCC_PLL_PSC_DIV16;
+        break;
+
+    case FL_RCC_RCHF_FREQUENCY_24MHZ:
+        div = FL_RCC_PLL_PSC_DIV24;
+        break;
+
+    default:
+        break;
+    }
+
+    if (clock <= 24)
+    {
+        FL_FLASH_SetReadWait(FLASH, FL_FLASH_READ_WAIT_0CYCLE);
+    }
+
+    else
+    {
+        if ((clock > 24) && (clock <= 48))
+        {
+            FL_FLASH_SetReadWait(FLASH, FL_FLASH_READ_WAIT_1CYCLE);
+        }
+
+        else
+        {
+            FL_FLASH_SetReadWait(FLASH, FL_FLASH_READ_WAIT_1CYCLE);
+        }
+    }
+
+    RCC_PLL_ConfigDomain_SYS(FL_RCC_PLL_CLK_SOURCE_RCHF, div, clock, FL_RCC_PLL_OUTPUT_X1);
+    FL_RCC_PLL_Enable();
+
+    while (FL_RCC_IsActiveFlag_PLLReady() != FL_SET);
+
+    FL_RCC_SetAHBPrescaler(FL_RCC_AHBCLK_PSC_DIV1);
+    FL_RCC_SetAPB1Prescaler(FL_RCC_APB1CLK_PSC_DIV1);
+    FL_RCC_SetAPB2Prescaler(FL_RCC_APB2CLK_PSC_DIV1);
+    FL_RCC_SetSystemClockSource(FL_RCC_SYSTEM_CLK_SOURCE_PLL);
+}

bsp/fm33lc026/board/board.h

+/*
+ * Copyright (c) 2006-2018, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2021-08-27     Jiao         first version
+ */
+
+#ifndef __BOARD_H__
+#define __BOARD_H__
+
+#include <rtthread.h>
+#include "fm33lc0xx_fl.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __BOARD_H__ */

bsp/fm33lc026/libraries/FM/FM33xx/Include/core_cmFunc.h

+/**************************************************************************//**
+ * @file     core_cmFunc.h
+ * @brief    CMSIS Cortex-M Core Function Access Header File
+ * @version  V4.10
+ * @date     18. March 2015
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+   All rights reserved.
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions are met:
+   - Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+   - Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in the
+     documentation and/or other materials provided with the distribution.
+   - Neither the name of ARM nor the names of its contributors may be used
+     to endorse or promote products derived from this software without
+     specific prior written permission.
+   *
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+   ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+   LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+   CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+   SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+   INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+   CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+   POSSIBILITY OF SUCH DAMAGE.
+   ---------------------------------------------------------------------------*/
+
+
+#ifndef __CORE_CMFUNC_H
+#define __CORE_CMFUNC_H
+
+
+/* ###########################  Core Function Access  ########################### */
+/** \ingroup  CMSIS_Core_FunctionInterface
+    \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
+  @{
+ */
+
+#if   defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+#if (__ARMCC_VERSION < 400677)
+  #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
+#endif
+
+/* intrinsic void __enable_irq();     */
+/* intrinsic void __disable_irq();    */
+
+/** \brief  Get Control Register
+
+    This function returns the content of the Control Register.
+
+    \return               Control Register value
+ */
+__STATIC_INLINE uint32_t __get_CONTROL(void)
+{
+  register uint32_t __regControl         __ASM("control");
+  return(__regControl);
+}
+
+
+/** \brief  Set Control Register
+
+    This function writes the given value to the Control Register.
+
+    \param [in]    control  Control Register value to set
+ */
+__STATIC_INLINE void __set_CONTROL(uint32_t control)
+{
+  register uint32_t __regControl         __ASM("control");
+  __regControl = control;
+}
+
+
+/** \brief  Get IPSR Register
+
+    This function returns the content of the IPSR Register.
+
+    \return               IPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_IPSR(void)
+{
+  register uint32_t __regIPSR          __ASM("ipsr");
+  return(__regIPSR);
+}
+
+
+/** \brief  Get APSR Register
+
+    This function returns the content of the APSR Register.
+
+    \return               APSR Register value
+ */
+__STATIC_INLINE uint32_t __get_APSR(void)
+{
+  register uint32_t __regAPSR          __ASM("apsr");
+  return(__regAPSR);
+}
+
+
+/** \brief  Get xPSR Register
+
+    This function returns the content of the xPSR Register.
+
+    \return               xPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_xPSR(void)
+{
+  register uint32_t __regXPSR          __ASM("xpsr");
+  return(__regXPSR);
+}
+
+
+/** \brief  Get Process Stack Pointer
+
+    This function returns the current value of the Process Stack Pointer (PSP).
+
+    \return               PSP Register value
+ */
+__STATIC_INLINE uint32_t __get_PSP(void)
+{
+  register uint32_t __regProcessStackPointer  __ASM("psp");
+  return(__regProcessStackPointer);
+}
+
+
+/** \brief  Set Process Stack Pointer
+
+    This function assigns the given value to the Process Stack Pointer (PSP).
+
+    \param [in]    topOfProcStack  Process Stack Pointer value to set
+ */
+__STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
+{
+  register uint32_t __regProcessStackPointer  __ASM("psp");
+  __regProcessStackPointer = topOfProcStack;
+}
+
+
+/** \brief  Get Main Stack Pointer
+
+    This function returns the current value of the Main Stack Pointer (MSP).
+
+    \return               MSP Register value
+ */
+__STATIC_INLINE uint32_t __get_MSP(void)
+{
+  register uint32_t __regMainStackPointer     __ASM("msp");
+  return(__regMainStackPointer);
+}
+
+
+/** \brief  Set Main Stack Pointer
+
+    This function assigns the given value to the Main Stack Pointer (MSP).
+
+    \param [in]    topOfMainStack  Main Stack Pointer value to set
+ */
+__STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
+{
+  register uint32_t __regMainStackPointer     __ASM("msp");
+  __regMainStackPointer = topOfMainStack;
+}
+
+
+/** \brief  Get Priority Mask
+
+    This function returns the current state of the priority mask bit from the Priority Mask Register.
+
+    \return               Priority Mask value
+ */
+__STATIC_INLINE uint32_t __get_PRIMASK(void)
+{
+  register uint32_t __regPriMask         __ASM("primask");
+  return(__regPriMask);
+}
+
+
+/** \brief  Set Priority Mask
+
+    This function assigns the given value to the Priority Mask Register.
+
+    \param [in]    priMask  Priority Mask
+ */
+__STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
+{
+  register uint32_t __regPriMask         __ASM("primask");
+  __regPriMask = (priMask);
+}
+
+
+#if       (__CORTEX_M >= 0x03) || (__CORTEX_SC >= 300)
+
+/** \brief  Enable FIQ
+
+    This function enables FIQ interrupts by clearing the F-bit in the CPSR.
+    Can only be executed in Privileged modes.
+ */
+#define __enable_fault_irq                __enable_fiq
+
+
+/** \brief  Disable FIQ
+
+    This function disables FIQ interrupts by setting the F-bit in the CPSR.
+    Can only be executed in Privileged modes.
+ */
+#define __disable_fault_irq               __disable_fiq
+
+
+/** \brief  Get Base Priority
+
+    This function returns the current value of the Base Priority register.
+
+    \return               Base Priority register value
+ */
+__STATIC_INLINE uint32_t  __get_BASEPRI(void)
+{
+  register uint32_t __regBasePri         __ASM("basepri");
+  return(__regBasePri);
+}
+
+
+/** \brief  Set Base Priority
+
+    This function assigns the given value to the Base Priority register.
+
+    \param [in]    basePri  Base Priority value to set
+ */
+__STATIC_INLINE void __set_BASEPRI(uint32_t basePri)
+{
+  register uint32_t __regBasePri         __ASM("basepri");
+  __regBasePri = (basePri & 0xff);
+}
+
+
+/** \brief  Set Base Priority with condition
+
+    This function assigns the given value to the Base Priority register only if BASEPRI masking is disabled,
+    or the new value increases the BASEPRI priority level.
+
+    \param [in]    basePri  Base Priority value to set
+ */
+__STATIC_INLINE void __set_BASEPRI_MAX(uint32_t basePri)
+{
+  register uint32_t __regBasePriMax      __ASM("basepri_max");
+  __regBasePriMax = (basePri & 0xff);
+}
+
+
+/** \brief  Get Fault Mask
+
+    This function returns the current value of the Fault Mask register.
+
+    \return               Fault Mask register value
+ */
+__STATIC_INLINE uint32_t __get_FAULTMASK(void)
+{
+  register uint32_t __regFaultMask       __ASM("faultmask");
+  return(__regFaultMask);
+}
+
+
+/** \brief  Set Fault Mask
+
+    This function assigns the given value to the Fault Mask register.
+
+    \param [in]    faultMask  Fault Mask value to set
+ */
+__STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
+{
+  register uint32_t __regFaultMask       __ASM("faultmask");
+  __regFaultMask = (faultMask & (uint32_t)1);
+}
+
+#endif /* (__CORTEX_M >= 0x03) || (__CORTEX_SC >= 300) */
+
+
+#if       (__CORTEX_M == 0x04) || (__CORTEX_M == 0x07)
+
+/** \brief  Get FPSCR
+
+    This function returns the current value of the Floating Point Status/Control register.
+
+    \return               Floating Point Status/Control register value
+ */
+__STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+  register uint32_t __regfpscr         __ASM("fpscr");
+  return(__regfpscr);
+#else
+   return(0);
+#endif
+}
+
+
+/** \brief  Set FPSCR
+
+    This function assigns the given value to the Floating Point Status/Control register.
+
+    \param [in]    fpscr  Floating Point Status/Control value to set
+ */
+__STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+  register uint32_t __regfpscr         __ASM("fpscr");
+  __regfpscr = (fpscr);
+#endif
+}
+
+#endif /* (__CORTEX_M == 0x04) || (__CORTEX_M == 0x07) */
+
+
+#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+/** \brief  Enable IRQ Interrupts
+
+  This function enables IRQ interrupts by clearing the I-bit in the CPSR.
+  Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_irq(void)
+{
+  __ASM volatile ("cpsie i" : : : "memory");
+}
+
+
+/** \brief  Disable IRQ Interrupts
+
+  This function disables IRQ interrupts by setting the I-bit in the CPSR.
+  Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_irq(void)
+{
+  __ASM volatile ("cpsid i" : : : "memory");
+}
+
+
+/** \brief  Get Control Register
+
+    This function returns the content of the Control Register.
+
+    \return               Control Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_CONTROL(void)
+{
+  uint32_t result;
+
+  __ASM volatile ("MRS %0, control" : "=r" (result) );
+  return(result);
+}
+
+
+/** \brief  Set Control Register
+
+    This function writes the given value to the Control Register.
+
+    \param [in]    control  Control Register value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_CONTROL(uint32_t control)
+{
+  __ASM volatile ("MSR control, %0" : : "r" (control) : "memory");
+}
+
+
+/** \brief  Get IPSR Register
+
+    This function returns the content of the IPSR Register.
+
+    \return               IPSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_IPSR(void)
+{
+  uint32_t result;
+
+  __ASM volatile ("MRS %0, ipsr" : "=r" (result) );
+  return(result);
+}
+
+
+/** \brief  Get APSR Register
+
+    This function returns the content of the APSR Register.
+
+    \return               APSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_APSR(void)
+{
+  uint32_t result;
+
+  __ASM volatile ("MRS %0, apsr" : "=r" (result) );
+  return(result);
+}
+
+
+/** \brief  Get xPSR Register
+
+    This function returns the content of the xPSR Register.
+
+    \return               xPSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_xPSR(void)
+{
+  uint32_t result;
+
+  __ASM volatile ("MRS %0, xpsr" : "=r" (result) );
+  return(result);
+}
+
+
+/** \brief  Get Process Stack Pointer
+
+    This function returns the current value of the Process Stack Pointer (PSP).
+
+    \return               PSP Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_PSP(void)
+{
+  register uint32_t result;
+
+  __ASM volatile ("MRS %0, psp\n"  : "=r" (result) );
+  return(result);
+}
+
+
+/** \brief  Set Process Stack Pointer
+
+    This function assigns the given value to the Process Stack Pointer (PSP).
+
+    \param [in]    topOfProcStack  Process Stack Pointer value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
+{
+  __ASM volatile ("MSR psp, %0\n" : : "r" (topOfProcStack) : "sp");
+}
+
+
+/** \brief  Get Main Stack Pointer
+
+    This function returns the current value of the Main Stack Pointer (MSP).
+
+    \return               MSP Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_MSP(void)
+{
+  register uint32_t result;
+
+  __ASM volatile ("MRS %0, msp\n" : "=r" (result) );
+  return(result);
+}
+
+
+/** \brief  Set Main Stack Pointer
+
+    This function assigns the given value to the Main Stack Pointer (MSP).
+
+    \param [in]    topOfMainStack  Main Stack Pointer value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
+{
+  __ASM volatile ("MSR msp, %0\n" : : "r" (topOfMainStack) : "sp");
+}
+
+
+/** \brief  Get Priority Mask
+
+    This function returns the current state of the priority mask bit from the Priority Mask Register.
+
+    \return               Priority Mask value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_PRIMASK(void)
+{
+  uint32_t result;
+
+  __ASM volatile ("MRS %0, primask" : "=r" (result) );
+  return(result);
+}
+
+
+/** \brief  Set Priority Mask
+
+    This function assigns the given value to the Priority Mask Register.
+
+    \param [in]    priMask  Priority Mask
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
+{
+  __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory");
+}
+
+
+#if       (__CORTEX_M >= 0x03)
+
+/** \brief  Enable FIQ
+
+    This function enables FIQ interrupts by clearing the F-bit in the CPSR.
+    Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_fault_irq(void)
+{
+  __ASM volatile ("cpsie f" : : : "memory");
+}
+
+
+/** \brief  Disable FIQ
+
+    This function disables FIQ interrupts by setting the F-bit in the CPSR.
+    Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_fault_irq(void)
+{
+  __ASM volatile ("cpsid f" : : : "memory");
+}
+
+
+/** \brief  Get Base Priority
+
+    This function returns the current value of the Base Priority register.
+
+    \return               Base Priority register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_BASEPRI(void)
+{
+  uint32_t result;
+
+  __ASM volatile ("MRS %0, basepri" : "=r" (result) );
+  return(result);
+}
+
+
+/** \brief  Set Base Priority
+
+    This function assigns the given value to the Base Priority register.
+
+    \param [in]    basePri  Base Priority value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_BASEPRI(uint32_t value)
+{
+  __ASM volatile ("MSR basepri, %0" : : "r" (value) : "memory");
+}
+
+
+/** \brief  Set Base Priority with condition
+
+    This function assigns the given value to the Base Priority register only if BASEPRI masking is disabled,
+	or the new value increases the BASEPRI priority level.
+
+    \param [in]    basePri  Base Priority value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_BASEPRI_MAX(uint32_t value)
+{
+  __ASM volatile ("MSR basepri_max, %0" : : "r" (value) : "memory");
+}
+
+
+/** \brief  Get Fault Mask
+
+    This function returns the current value of the Fault Mask register.
+
+    \return               Fault Mask register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FAULTMASK(void)
+{
+  uint32_t result;
+
+  __ASM volatile ("MRS %0, faultmask" : "=r" (result) );
+  return(result);
+}
+
+
+/** \brief  Set Fault Mask
+
+    This function assigns the given value to the Fault Mask register.
+
+    \param [in]    faultMask  Fault Mask value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
+{
+  __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory");
+}
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+#if       (__CORTEX_M == 0x04) || (__CORTEX_M == 0x07)
+
+/** \brief  Get FPSCR
+
+    This function returns the current value of the Floating Point Status/Control register.
+
+    \return               Floating Point Status/Control register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+  uint32_t result;
+
+  /* Empty asm statement works as a scheduling barrier */
+  __ASM volatile ("");
+  __ASM volatile ("VMRS %0, fpscr" : "=r" (result) );
+  __ASM volatile ("");
+  return(result);
+#else
+   return(0);
+#endif
+}
+
+
+/** \brief  Set FPSCR
+
+    This function assigns the given value to the Floating Point Status/Control register.
+
+    \param [in]    fpscr  Floating Point Status/Control value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+  /* Empty asm statement works as a scheduling barrier */
+  __ASM volatile ("");
+  __ASM volatile ("VMSR fpscr, %0" : : "r" (fpscr) : "vfpcc");
+  __ASM volatile ("");
+#endif
+}
+
+#endif /* (__CORTEX_M == 0x04) || (__CORTEX_M == 0x07) */
+
+
+#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+#include <cmsis_iar.h>
+
+
+#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/
+/* TI CCS specific functions */
+#include <cmsis_ccs.h>
+
+
+#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/
+/* TASKING carm specific functions */
+/*
+ * The CMSIS functions have been implemented as intrinsics in the compiler.
+ * Please use "carm -?i" to get an up to date list of all intrinsics,
+ * Including the CMSIS ones.
+ */
+
+
+#elif defined ( __CSMC__ ) /*------------------ COSMIC Compiler -------------------*/
+/* Cosmic specific functions */
+#include <cmsis_csm.h>
+
+#endif
+
+/*@} end of CMSIS_Core_RegAccFunctions */
+
+#endif /* __CORE_CMFUNC_H */

bsp/fm33lc026/libraries/FM/FM33xx/Include/fm33_assert.h

+/**
+  ****************************************************************************************************
+  * @file    fm33_assert.h
+  * @author  FMSH Application Team
+  * @brief   Assert function define
+  ****************************************************************************************************
+  * @attention
+  *
+  * Copyright (c) [2019] [Fudan Microelectronics]
+  * THIS SOFTWARE is licensed under the Mulan PSL v1.
+  * can use this software according to the terms and conditions of the Mulan PSL v1.
+  * You may obtain a copy of Mulan PSL v1 at:
+  * http://license.coscl.org.cn/MulanPSL
+  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND, EITHER EXPRESS OR
+  * IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT, MERCHANTABILITY OR FIT FOR A PARTICULAR
+  * PURPOSE.
+  * See the Mulan PSL v1 for more details.
+  *
+  ****************************************************************************************************
+  */
+#ifndef __FM33_ASSERT_H
+#define __FM33_ASSERT_H
+#include "fm33xx.h"
+#ifdef __cplusplus
+ extern "C" {
+#endif
+     
+     
+#ifdef  USE_FULL_ASSERT
+#define assert_param(expr) do{if((expr) == 0)for(;;);}while(0)
+#else
+#define assert_param(expr) ((void)0U)
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif
+

bsp/fm33lc026/libraries/FM/FM33xx/Include/fm33xx.h

+/**
+  ****************************************************************************************************
+  * @file    fm33xx.h
+  * @author  FMSH Application Team
+  * @brief   Header file of FL Module
+  ****************************************************************************************************
+  * @attention
+  *
+  * Copyright (c) [2019] [Fudan Microelectronics]
+  * THIS SOFTWARE is licensed under the Mulan PSL v1.
+  * can use this software according to the terms and conditions of the Mulan PSL v1.
+  * You may obtain a copy of Mulan PSL v1 at:
+  * http://license.coscl.org.cn/MulanPSL
+  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND, EITHER EXPRESS OR
+  * IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT, MERCHANTABILITY OR FIT FOR A PARTICULAR
+  * PURPOSE.
+  * See the Mulan PSL v1 for more details.
+  *
+  ****************************************************************************************************
+  */ 
+
+/** @addtogroup CMSIS
+  * @{
+  */
+    
+#ifndef __FM33xx_H
+#define __FM33xx_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+   
+/** @addtogroup Library_configuration_section
+  * @{
+  */
+         
+     
+/**
+  * @brief FM33 Family
+  */
+#if !defined (FM33xx)
+#define FM33xx
+#endif /* FM33XX */
+/**
+  * @brief CMSIS Device version number
+  */
+#define __FM33x0xx_CMSIS_VERSION_MAIN   (0x02) /*!< [31:24] main version */
+#define __FM33x0xx_CMSIS_VERSION_SUB1   (0x00) /*!< [23:16] sub1 version */
+#define __FM33x0xx_CMSIS_VERSION_SUB2   (0x00) /*!< [15:8]  sub2 version */
+#define __FM33x0xx_CMSIS_VERSION_RC     (0x00) /*!< [7:0]  release candidate */
+#define __FM33x0xx_CMSIS_VERSION        ((__FM33x0xx_CMSIS_VERSION_MAIN  << 24)\
+                                         |(__FM33x0xx_CMSIS_VERSION_SUB1 << 16)\
+                                         |(__FM33x0xx_CMSIS_VERSION_SUB2 << 8 )\
+                                         |(__FM33x0xx_CMSIS_VERSION_RC))
+                                             
+/**
+  * @}
+  */
+
+/** @addtogroup Device_Included
+  * @{
+  */
+#if defined(FM33L0XX)
+  #include "fm33l0xx.h"
+#elif defined(FM33LC0XX)
+  #include "fm33lc0xx.h"
+#elif defined(FM33LG0XX)
+  #include "fm33lg0xx.h"
+#else
+ #error "Please select first the target FM33x0xx device used in your application (in FM33xxx.h file)"
+#endif
+
+/**
+  * @}
+  */
+
+/** @addtogroup Exported_macro
+  * @{
+  */
+
+#define SET_BIT(REG, BIT)     ((REG) |= (BIT))
+
+#define CLEAR_BIT(REG, BIT)   ((REG) &= ~(BIT))
+
+#define READ_BIT(REG, BIT)    ((REG) & (BIT))
+
+#define CLEAR_REG(REG)        ((REG) = (0x0))
+
+#define WRITE_REG(REG, VAL)   ((REG) = (VAL))
+
+#define READ_REG(REG)         ((REG))
+
+#define MODIFY_REG(REG, CLEARMASK, SETMASK)  WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __FM33xx_H */
+
+/**
+  * @}
+  */
+  
+
+/************************ (C) COPYRIGHT Fudan Microelectronics *****END OF FILE****/

bsp/fm33lc026/libraries/FM/FM33xx/Include/system_fm33lc0xx.h

+/**************************************************************************//**
+ * @file     system_fm33lc0xx.h
+ * @brief    CMSIS Cortex-M0 Device Peripheral Access Layer Header File for
+ *           Device FM33LC0XX
+ * @version  V2.00
+ * @date     15. March 2021
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2012 ARM LIMITED
+
+   All rights reserved.
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions are met:
+   - Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+   - Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in the
+     documentation and/or other materials provided with the distribution.
+   - Neither the name of ARM nor the names of its contributors may be used
+     to endorse or promote products derived from this software without
+     specific prior written permission.
+   *
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+   ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+   LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+   CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+   SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+   INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+   CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+   POSSIBILITY OF SUCH DAMAGE.
+   ---------------------------------------------------------------------------*/
+
+
+#ifndef SYSTEM_FM33LC0XX_H
+#define SYSTEM_FM33LC0XX_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdint.h>
+#include <stdio.h>
+#include "fm33lc0xx.h"
+    
+#define   USE_LSCLK_CLOCK_SRC_XTLF
+
+//#define   SYSCLK_SRC_RC4M
+//#define   SYSCLK_SRC_XTHF
+#define   SYSCLK_SRC_RCHF
+//#define   SYSCLK_SRC_PLL
+
+    
+    
+//#define   USE_PLL_CLOCK_SRC_RCHF
+//#define   USE_PLL_CLOCK_SRC_XTHF
+
+
+#if ((!defined(SYSCLK_SRC_RC4M)) && (!defined(SYSCLK_SRC_XTHF))&&(!defined(SYSCLK_SRC_PLL))&&(!defined(SYSCLK_SRC_RCHF)))
+    #error "Must select a clock source form the SYSCLK_SRC_RC4M or SYSCLK_SRC_XTHF or SYSCLK_SRC_PLL or SYSCLK_SRC_RCHF as the master clock."
+#elif (((defined(SYSCLK_SRC_RC4M)) && ((defined(SYSCLK_SRC_XTHF))||(defined(SYSCLK_SRC_PLL))||(defined(SYSCLK_SRC_RCHF))))||\
+     ((defined(SYSCLK_SRC_XTHF)) && ((defined(SYSCLK_SRC_RC4M))||(defined(SYSCLK_SRC_PLL))||(defined(SYSCLK_SRC_RCHF))))||\
+     ((defined(SYSCLK_SRC_PLL)) && ((defined(SYSCLK_SRC_XTHF))||(defined(SYSCLK_SRC_RC4M))||(defined(SYSCLK_SRC_RCHF))))||\
+     ((defined(SYSCLK_SRC_RCHF)) && ((defined(SYSCLK_SRC_XTHF))||(defined(SYSCLK_SRC_PLL))||(defined(SYSCLK_SRC_RC4M)))))
+    #error "Only one clock source can be selected as the master clock."
+#endif
+
+#if defined(SYSCLK_SRC_PLL) && !defined(USE_PLL_CLOCK_SRC_RCHF) && !defined(USE_PLL_CLOCK_SRC_XTHF)
+    #error "You have chosen to enable the PLL, so you need to specify the clock source for the PLL.."
+#elif defined(SYSCLK_SRC_PLL) && (defined(USE_PLL_CLOCK_SRC_RCHF) && defined(USE_PLL_CLOCK_SRC_XTHF))
+    #error "Please select one of the USE_PLL_CLOCK_SRC_RCHF and USE_PLL_CLOCK_SRC_XTHF in your application"
+#endif
+
+#if !defined  (XTHF_VALUE)
+    #define XTHF_VALUE    ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */
+#endif /* XTHF_VALUE */    
+
+#if !defined  (XTLF_VALUE)
+    #define XTLF_VALUE    ((uint32_t)32768U) /*!< Value of the Internal oscillator in Hz*/
+#endif /* XTLF_VALUE */         
+
+
+#define LDT_CHECK(_N_VALUE_, _T_VALUE_)                         \
+                            ((((_N_VALUE_ >> 16) & 0xffff) ==   \
+                            ((~_N_VALUE_) & 0xffff)) ? _N_VALUE_ : _T_VALUE_)
+
+#define LPOSC_LDT_TRIM      (*(uint32_t *)0x1FFFFB20)   // LPOSC 常温校准值
+#define RCHF8M_LDT_TRIM     (*(uint32_t *)0x1FFFFB40)	// RC8M 常温校准值
+#define RCHF16M_LDT_TRIM 	(*(uint32_t *)0x1FFFFB3C)	// RC16M 常温校准值
+#define RCHF24M_LDT_TRIM 	(*(uint32_t *)0x1FFFFB38)	// RC24M 常温校准值
+#define RCMF4M_LDT_TRIM     (*(uint32_t *)0x1FFFFB44)   // RCMF 常温校准值
+
+#define LPOSC_TRIM          (LDT_CHECK(LPOSC_LDT_TRIM, 0x80) & 0xff)
+#define RCMF4M_TRIM         (LDT_CHECK(RCMF4M_LDT_TRIM, 0x40) & 0x7f)
+#define RCHF8M_TRIM         (LDT_CHECK(RCHF8M_LDT_TRIM, 0x40) & 0x7f)
+#define RCHF16M_TRIM        (LDT_CHECK(RCHF16M_LDT_TRIM, 0x40) & 0x7f)
+#define RCHF24M_TRIM        (LDT_CHECK(RCHF24M_LDT_TRIM, 0x40) & 0x7f)
+         
+
+#define __SYSTEM_CLOCK      (8000000)
+
+
+/**
+  * @brief FL NVIC Init Sturcture definition
+  */
+typedef  struct
+{
+    /* 中断抢占优先级 */
+    uint32_t preemptPriority;
+    
+}NVIC_ConfigTypeDef;
+
+
+/**
+ * Initialize the system
+ *
+ * @param  none
+ * @return none
+ *
+ * @brief  Setup the microcontroller system.
+ *         Initialize the System and update the SystemCoreClock variable.
+ */
+void SystemInit (void);
+
+/**
+ * Update SystemCoreClock variable
+ *
+ * @param  none
+ * @return none
+ *
+ * @brief  Updates the SystemCoreClock with current core Clock
+ *         retrieved from cpu registers.
+ */
+extern uint32_t SystemCoreClock;
+void SystemCoreClockUpdate (void);
+/**
+  * @brief	NVIC_Init config NVIC
+  *
+  * @param 	NVIC_configStruct configParams
+  *
+  * @param 	IRQn Interrupt number
+  *
+  * @retval	None
+  */
+void NVIC_Init(NVIC_ConfigTypeDef  *NVIC_configStruct,IRQn_Type IRQn);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* SYSTEM_FM33LC0XX_H */

bsp/fm33lc026/libraries/FM/FM33xx/Include/system_fm33lg0xx.h

+/**************************************************************************//**
+ * @file     system_FM33LG0XX.h
+ * @brief    CMSIS Cortex-M# Device Peripheral Access Layer Header File for
+ *           Device FM33LG0XX
+ * @version  V1.02
+ * @date     31-8-2018
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2012 ARM LIMITED
+
+   All rights reserved.
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions are met:
+   - Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+   - Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in the
+     documentation and/or other materials provided with the distribution.
+   - Neither the name of ARM nor the names of its contributors may be used
+     to endorse or promote products derived from this software without
+     specific prior written permission.
+   *
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+   ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+   LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+   CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+   SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+   INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+   CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+   POSSIBILITY OF SUCH DAMAGE.
+   ---------------------------------------------------------------------------*/
+
+
+#ifndef SYSTEM_FM33LG0XX_H
+#define SYSTEM_FM33LG0XX_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdint.h>
+#include <stdio.h>
+#include "fm33lg0xx.h"
+            
+
+#if !defined  (XTHF_VALUE)
+    #define XTHF_VALUE    ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */
+#endif /* XTHF_VALUE */    
+
+#if !defined  (XTLF_VALUE)
+    #define XTLF_VALUE    ((uint32_t)32768U) /*!< Value of the Internal oscillator in Hz*/
+#endif /* XTLF_VALUE */        
+    
+    
+#define __SYSTEM_CLOCK          (8000000)
+#define DELAY_US                (__SYSTEM_CLOCK/1000000)
+#define DELAY_MS                (__SYSTEM_CLOCK/1000)
+
+
+#define Do_DelayStart()  { \
+                        uint32_t LastTick = SysTick->VAL;   do {
+                        
+#define While_DelayMsEnd(Count) }while(((LastTick - SysTick->VAL)&0xFFFFFF)<DELAY_MS*Count); \
+                      }
+                      
+#define While_DelayUsEnd(Count) }while(((LastTick - SysTick->VAL)&0xFFFFFF)<DELAY_US*Count); \
+}            
+
+/**
+ * Initialize the system
+ *
+ * @param  none
+ * @return none
+ *
+ * @brief  Setup the microcontroller system.
+ *         Initialize the System and update the SystemCoreClock variable.
+ */
+void SystemInit (void);
+
+/**
+ * Update SystemCoreClock variable
+ *
+ * @param  none
+ * @return none
+ *
+ * @brief  Updates the SystemCoreClock with current core Clock
+ *         retrieved from cpu registers.
+ */
+void SystemCoreClockUpdate (void);
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* SYSTEM_MVCM3_H */

bsp/fm33lc026/libraries/FM/FM33xx/Source/Templates/gcc/linker/fm33lc01x_flash.ld

+/* Entry Point */
+ENTRY(Reset_Handler)
+
+/* Highest address of the user mode stack */
+_estack = 0x20006000;    /* end of RAM */
+/* Generate a link error if heap and stack don't fit into RAM */
+_Min_Heap_Size  = 0x400;		/* required amount of heap  */
+_Stack_Size = 0x400;		 	/* amount of stack */
+
+/* Specify the memory areas */
+MEMORY
+{
+RAM (xrw)      : ORIGIN = 0x20000000, LENGTH = 24K
+FLASH (rx)     : ORIGIN = 0x00000000, LENGTH = 64K
+}
+
+/* Define output sections */
+SECTIONS
+{
+  /* The startup code goes first into FLASH */
+  .isr_vector :
+  {
+    . = ALIGN(4);
+    KEEP(*(.isr_vector)) /* Startup code */
+    . = ALIGN(4);
+  } >FLASH
+
+  /* The program code and other data goes into FLASH */
+  .text :
+  {
+    . = ALIGN(4);
+    *(.text)           /* .text sections (code) */
+    *(.text*)          /* .text* sections (code) */
+    *(.glue_7)         /* glue arm to thumb code */
+    *(.glue_7t)        /* glue thumb to arm code */
+    *(.eh_frame)
+
+    KEEP (*(.init))
+    KEEP (*(.fini))
+
+    . = ALIGN(4);
+    _etext = .;        /* define a global symbols at end of code */
+  } >FLASH
+
+  /* Constant data goes into FLASH */
+  .rodata :
+  {
+    . = ALIGN(4);
+    *(.rodata)         /* .rodata sections (constants, strings, etc.) */
+    *(.rodata*)        /* .rodata* sections (constants, strings, etc.) */
+    . = ALIGN(4);
+  } >FLASH
+
+  .ARM.extab   : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
+  .ARM : {
+    __exidx_start = .;
+    *(.ARM.exidx*)
+    __exidx_end = .;
+  } >FLASH
+
+  .preinit_array     :
+  {
+    PROVIDE_HIDDEN (__preinit_array_start = .);
+    KEEP (*(.preinit_array*))
+    PROVIDE_HIDDEN (__preinit_array_end = .);
+  } >FLASH
+  .init_array :
+  {
+    PROVIDE_HIDDEN (__init_array_start = .);
+    KEEP (*(SORT(.init_array.*)))
+    KEEP (*(.init_array*))
+    PROVIDE_HIDDEN (__init_array_end = .);
+  } >FLASH
+  .fini_array :
+  {
+    PROVIDE_HIDDEN (__fini_array_start = .);
+    KEEP (*(SORT(.fini_array.*)))
+    KEEP (*(.fini_array*))
+    PROVIDE_HIDDEN (__fini_array_end = .);
+  } >FLASH
+
+  /* used by the startup to initialize data */
+  _sidata = LOADADDR(.data);
+
+  /* Initialized data sections goes into RAM, load LMA copy after code */
+  .data : 
+  {
+    . = ALIGN(4);
+    _sdata = .;        /* create a global symbol at data start */
+    *(.data)           /* .data sections */
+    *(.data*)          /* .data* sections */
+
+    . = ALIGN(4);
+    _edata = .;        /* define a global symbol at data end */
+  } >RAM AT> FLASH
+
+  
+  /* Uninitialized data section */
+  . = ALIGN(4);
+  .bss :
+  {
+    /* This is used by the startup in order to initialize the .bss secion */
+    _sbss = .;         /* define a global symbol at bss start */
+    __bss_start__ = _sbss;
+    *(.bss)
+    *(.bss*)
+    *(COMMON)
+
+    . = ALIGN(4);
+    _ebss = .;         /* define a global symbol at bss end */
+    __bss_end__ = _ebss;
+  } >RAM
+
+  /* User_heap_stack section, used to check that there is enough RAM left */
+  . = ALIGN(8);
+  PROVIDE ( end     = . );
+  PROVIDE ( _end    = . );
+
+  /* system stack */
+  PROVIDE (_stack_base  = _estack - _Stack_Size); /* _estack is top of stack*/
+  ASSERT  ((_stack_base > end), "Error: No room left for the stack")
+  /* _estack is top of stack*/
+
+  /* left ram for heap */
+  PROVIDE (heap_start = _end);
+  PROVIDE (heap_end   = _stack_base);
+  PROVIDE (heap_len   = heap_end - heap_start);
+  ASSERT  ((heap_len > _Min_Heap_Size), "Error: No room left for the heap")
+
+  .ARM.attributes 0 : { *(.ARM.attributes) }
+}

bsp/fm33lc026/libraries/FM33LC0xx_FL_Driver/CMSIS/Include/fm33_assert.h

+/**
+  ****************************************************************************************************
+  * @file    fm33_assert.h
+  * @author  FMSH Application Team
+  * @brief   Assert function define
+  ****************************************************************************************************
+  * @attention
+  *
+  * Copyright (c) [2019] [Fudan Microelectronics]
+  * THIS SOFTWARE is licensed under the Mulan PSL v1.
+  * can use this software according to the terms and conditions of the Mulan PSL v1.
+  * You may obtain a copy of Mulan PSL v1 at:
+  * http://license.coscl.org.cn/MulanPSL
+  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND, EITHER EXPRESS OR
+  * IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT, MERCHANTABILITY OR FIT FOR A PARTICULAR
+  * PURPOSE.
+  * See the Mulan PSL v1 for more details.
+  *
+  ****************************************************************************************************
+  */
+#ifndef __FM33_ASSERT_H
+#define __FM33_ASSERT_H
+#include "fm33xx.h"
+#ifdef __cplusplus
+ extern "C" {
+#endif
+     
+     
+#ifdef  USE_FULL_ASSERT
+#define assert_param(expr) do{if((expr) == 0)for(;;);}while(0)
+#else
+#define assert_param(expr) ((void)0U)
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif
+