Test B210 in max sprate

sdr/uhd_io.cpp

@@ -37,22 +37,22 @@ int main(int /*argc*/, char * /*argv*/[])
     char dev_args[] = "";
     char error_string[512];
     //Sample rate in Hz
-    double sprate		= 61440000 /2 ;
+    double sprate		=  61.44e6/2 ;
     //接收频率
-    double rx_freq		= 200.0e6;
+    double rx_freq		= 107.7e6;
     double rx_sprate	= sprate;
     double rx_gain		= 55.0;
     bool   rx_agc		= false;
-    double rx_bw		= sprate/1.2;
+    double rx_bw		= 400000;
     //模组，左侧=0 右侧=1
     size_t rx_channel	= 0;
     //转发频率
-    double tx_freq		= 100.0e6;
+    double tx_freq		= 89.0e6;
     double tx_sprate	= sprate;
     double tx_gain		= 70;
-    double tx_bw		= sprate/1.2;
+    double tx_bw		= 400000;
     //模组，左侧=0 右侧=1
-    size_t tx_channel	= 1;
+    size_t tx_channel	= 0;
 
     //设备句柄
     uhd_usrp_handle usrp = 0;
@@ -237,13 +237,16 @@ int main(int /*argc*/, char * /*argv*/[])
 	fprintf(stderr, "Issuing stream command.\n");
 	UHD_DO(uhd_rx_streamer_issue_stream_cmd(rx_streamer, &rx_stream_cmd));
 
-	uhd_usrp_set_time_now(usrp,0,0,0);
+	//uhd_usrp_set_time_now(usrp,0,0,0);
 	size_t num_samps_sent = 0;
 	// Actual streaming, TX Threading
 	std::thread th_send([&]()->void
 	{
+
 				try{
 				    while (!stop_signal_called) {
+						if (rx_pos<5)
+							continue;
 					SPTYPE * tx_buff = io_buff[tx_pos % sz_buffer];
 					const void ** tx_buff_ptr = (const void **) &tx_buff;
 					UHD_DO(uhd_tx_streamer_send(tx_streamer, tx_buff_ptr, tx_sps_buff, &tx_meta, 1, &num_samps_sent));

sdr/uhd_io_cpp.cpp

@@ -3,6 +3,7 @@
  * Copyright 2018 Ettus Research, a National Instruments Company
  *
  * SPDX-License-Identifier: GPL-3.0-or-later
+ * 丁劲犇修改 2021
  */
 
 #include <uhd/types/tune_request.hpp>
@@ -29,39 +30,52 @@ void sigint_handler(int code){
 	(void)code;
 	stop_signal_called = true;
 }
-
+/*!
+ * \brief The tag_channelOptions struct
+ * 通道配置参数
+ */
 struct tag_channelOptions{
-	std::string type = "sc16";		//sample type: fc64, fc32, or sc16
-	std::string ant = "TX/RX";		//antenna selection
-	std::string subdev;				//subdevice specification
-	std::string wirefmt;			//wire format (sc8 or sc16)
-	size_t channel = 0;				//which channel to use
-	size_t spb	=	10000;			//samples per buffer
-	double rate = 61.44e6/2;		//rate of outgoing samples
-	double freq = 1.0e9;			//RF center frequency in Hz
-	double gain = 55;				//gain for the RF chain
-	double bw   = rate * 0.8;		//analog frontend filter bandwidth in Hz
-	double lo_offset = 0;			//Offset for frontend LO in Hz (optional)
-	bool   int_n_mod = false;		//int-n mode
-	double setup_time = 3.0;		//setup time for rx
+	std::string type = "sc16";		//样点类型，为上位机上类型: fc64, fc32, or sc16
+	std::string ant = "TX/RX";		//天线选取，B210 有 TX/RX 或者 RX2两个
+	std::string subdev;				//子设备，本例子没有配置
+	std::string wirefmt;			//内部类型 (sc8 or sc16)，是片上处理的类型
+	size_t channel = 0;				//通道号，可以是0（左侧）或者1（右侧）
+	size_t spb	=	10000;			//缓冲大小，太小会丢包，太大会超时
+	double rate = 61.44e6/2;		//采样率，单位Hz
+	double freq = 1.0e9;			//射频频率，单位Hz
+	double gain = 55;				//射频增益，单位dB
+	double bw   = rate;				//滤波带宽，默认为采样窗口
+	double lo_offset = 0;			//LO偏移，单位 Hz (缺省)
+	bool   int_n_mod = false;		//int-n 模式（本例不配置）
+	bool   docheck = true;			//在开始前执行检查
+	double setup_time = 1.0;		//rx配置检查时间，可选。
 };
+//通道检查函数
 bool check_tx_status(const std::string & ref, multi_usrp::sptr usrp);
 bool check_rx_status(const std::string & ref, multi_usrp::sptr usrp,const tag_channelOptions & op);
 
-template <class FMT>
+/*!
+ * 范例吞吐函数,使用环形队列保持跟随收发
+ */
+template <class FMT = short>
 void do_io(
 		const tag_channelOptions & oprx,
 		const tag_channelOptions & optx,
 		rx_streamer::sptr rx,
 		tx_streamer::sptr tx)
 {
+	//初始化队列
 	std::vector< std::shared_ptr< FMT > > vec_buffer;
+	std::vector< int > vec_buffersz;
 	const int bufsz = 65536;
 	for (int i=0;i<bufsz;++i)
-		vec_buffer.push_back(std::shared_ptr< FMT > (new FMT[oprx.spb]));
-
+	{
+		vec_buffer.push_back(std::shared_ptr< FMT > (new FMT[oprx.spb * 2]));
+		vec_buffersz.push_back(0);
+	}
+	//收发计数
 	long long rx_count = 0, tx_count = 0;
-
+	//接收线程
 	auto thcall_rx = [&]()->void{
 		uhd::rx_metadata_t md_rx;
 		uhd::stream_cmd_t stream_cmd(uhd::stream_cmd_t::STREAM_MODE_START_CONTINUOUS);
@@ -71,7 +85,7 @@ void do_io(
 		rx->issue_stream_cmd(stream_cmd);
 		while (!stop_signal_called)
 		{
-			const size_t samples_recv = rx->recv((void *)(vec_buffer[rx_count % bufsz].get()),oprx.spb,md_rx,0.1,false);
+			vec_buffersz[rx_count % bufsz] = rx->recv((void *)(vec_buffer[rx_count % bufsz].get()),oprx.spb,md_rx,0.1,false);
 			++rx_count;
 			if (md_rx.error_code == uhd::rx_metadata_t::ERROR_CODE_TIMEOUT)
 				fputs("Time out.",stderr);
@@ -79,18 +93,23 @@ void do_io(
 				fputs("Over flow",stderr);
 			else if (md_rx.error_code != uhd::rx_metadata_t::ERROR_CODE_NONE)
 				cerr << "Receiver error: "<< md_rx.strerror() << endl ;
-			if (samples_recv != oprx.spb)
-				cerr << "Receiver error, samples_recv "<<samples_recv << "!= spb " <<oprx.spb<< endl ;
 		}
 	};
-
+	//发射线程
 	auto thcall_tx = [&]()->void{
 		uhd::tx_metadata_t md_tx;
 		md_tx.end_of_burst   = false;
 		md_tx.start_of_burst = false;
+		long long last_tx = -1;
 		while (!stop_signal_called)
 		{
-			const size_t samples_sent = tx->send((void *)(vec_buffer[tx_count % bufsz].get()),oprx.spb,md_tx,0.1);
+			//等待一会数据，以便TX可以保持跟随。也可以不设置，这样开始时会争夺。
+			if (rx_count<100)
+				continue;
+			if (last_tx==tx_count)
+				cerr<<"Blocked!"<<endl;
+			const size_t samples_sent = tx->send((void *)(vec_buffer[tx_count % bufsz].get()),vec_buffersz[tx_count % bufsz],md_tx,0.1);
+			last_tx = tx_count;
 			if (tx_count<rx_count)
 				++tx_count;
 			if (samples_sent != optx.spb)
@@ -98,19 +117,17 @@ void do_io(
 		}
 	};
 
-	std::cout<<"Press Enter to Start."<<endl;
-
-	thread rx_thread(thcall_rx);
+	//启动线程
+	thread rx_thread(thcall_rx);	
 	thread tx_thread(thcall_tx);
-
 	std::cout<<"Press ^C to Stop."<<endl;
-
+	//主线程不断打印状态
 	while (!stop_signal_called)
 	{
 		cerr<<"RX" << rx_count<< " TX " << tx_count<<"\r";
 		std::this_thread::sleep_for(std::chrono::milliseconds(400));
 	}
-
+	//退出
 	rx_thread.join();
 	tx_thread.join();
 
@@ -119,29 +136,29 @@ void do_io(
 
 int UHD_SAFE_MAIN(int /*argc*/, char* /*argv*/[])
 {
-	// create a usrp device
+	//1.创建一个设备，可以不填写，则使用第一台设备。
 	std::string args ("");
-	//reference source (internal, external, mimo)
+	//2.设置时钟参考 (internal, external, mimo)
 	std::string ref = "internal";
 	cerr << "Creating the usrp device with: "  << args  <<"..."<< endl;
 	multi_usrp::sptr usrp = multi_usrp::make(args);
 	usrp->set_clock_source(ref);
 
-	//Set Tx channal----------------------
-
+	//3.配置发射
 	tag_channelOptions tx_op;
-	tx_op.channel = 1;//using channel No.2
-	tx_op.freq = 88.0e6;
-	//subdevice specification
+	tx_op.channel = 0;
+	tx_op.freq = 89e6;
+	tx_op.bw = 400e3;
+	tx_op.gain=70;
+	//3.1子设备配置（默认）
 	if (tx_op.subdev.size())
 		usrp->set_tx_subdev_spec(tx_op.subdev);
 	cerr << "TX Using Device: " << usrp->get_pp_string() << endl;
-
+	//3.2速率配置
 	cerr << "Setting TX Rate: " <<  (tx_op.rate / 1e6) << "Msps..." << endl;
 	usrp->set_tx_rate(tx_op.rate);
 	cerr << "Actual TX Rate: " << usrp->get_tx_rate() / 1e6 << "Msps..." << endl;
-
-	// set the center frequency
+	//3.3中心频率配置
 	cerr << "Setting TX Freq: "  << (tx_op.freq / 1e6) <<"MHz..." << endl;
 	cerr << "Setting TX LO Offset: " << (tx_op.lo_offset / 1e6) << "MHz..." <<endl;
 	tune_request_t tune_request_tx = tune_request_t(tx_op.freq, tx_op.lo_offset);
@@ -149,34 +166,34 @@ int UHD_SAFE_MAIN(int /*argc*/, char* /*argv*/[])
 		tune_request_tx.args = uhd::device_addr_t("mode_n=integer");
 	usrp->set_tx_freq(tune_request_tx);
 	cerr << "Actual TX Freq: " <<  (usrp->get_tx_freq() / 1e6) << "MHz..." << endl;
-
-	// set the rf gain
+	//3.4增益配置
 	cerr << "Setting TX Gain: " << tx_op.gain <<" dB..." << endl;
 	usrp->set_tx_gain(tx_op.gain);
 	cerr << "Actual TX Gain: " << usrp->get_tx_gain() << " dB..." << endl;
-
-	// set the analog frontend filter bandwidth
+	//3.5模拟前端滤波器带宽配置
 	cerr << "Setting TX Bandwidth: " << (tx_op.bw / 1e6) << "MHz..."  << endl;
 	usrp->set_tx_bandwidth(tx_op.bw);
 	cerr << "Actual TX Bandwidth: " << usrp->get_tx_bandwidth() / 1e6 << "MHz..." << endl;
-	// set the antenna
+	//3.6指定天线
 	if (tx_op.ant.size())
 		usrp->set_tx_antenna(tx_op.ant);
 
-	//Set Rx Channel
+	//4.配置接收
 	tag_channelOptions rx_op;
 	rx_op.ant = "RX2";
 	rx_op.channel = 0;
-	//subdevice specification
+	rx_op.bw = 400e3;
+	rx_op.freq = 107.7e6;
+	rx_op.gain = 50;
+	//4.1 子设备
 	if (rx_op.subdev.size())
 		usrp->set_rx_subdev_spec(rx_op.subdev);
 	cerr << "RX Using Device: " << usrp->get_pp_string() << endl;
-
+	//4.2 采样率
 	cerr << "Setting RX Rate: " <<  (rx_op.rate / 1e6) << "Msps..." << endl;
 	usrp->set_rx_rate(rx_op.rate);
 	cerr << "Actual RX Rate: " << usrp->get_rx_rate() / 1e6 << "Msps..." << endl;
-
-	// set the center frequency
+	//4.3 中心频率
 	cerr << "Setting RX Freq: "  << (rx_op.freq / 1e6) <<"MHz..." << endl;
 	cerr << "Setting RX LO Offset: " << (rx_op.lo_offset / 1e6) << "MHz..." <<endl;
 	tune_request_t tune_request_rx = tune_request_t(rx_op.freq, rx_op.lo_offset);
@@ -184,37 +201,37 @@ int UHD_SAFE_MAIN(int /*argc*/, char* /*argv*/[])
 		tune_request_rx.args = uhd::device_addr_t("mode_n=integer");
 	usrp->set_rx_freq(tune_request_rx);
 	cerr << "Actual RX Freq: " <<  (usrp->get_rx_freq() / 1e6) << "MHz..." << endl;
-
-	// set the rf gain
+	//4.4 增益
 	cerr << "Setting RX Gain: " << rx_op.gain <<" dB..." << endl;
 	usrp->set_rx_gain(rx_op.gain);
 	cerr << "Actual RX Gain: " << usrp->get_rx_gain() << " dB..." << endl;
-
-	// set the analog frontend filter bandwidth
+	//4.5 前端模拟滤波带宽
 	cerr << "Setting RX Bandwidth: " << (rx_op.bw / 1e6) << "MHz..."  << endl;
 	usrp->set_rx_bandwidth(rx_op.bw);
 	cerr << "Actual RX Bandwidth: " << usrp->get_rx_bandwidth() / 1e6 << "MHz..." << endl;
-	// set the antenna
+	//4.6 选择天线
 	if (rx_op.ant.size())
 		usrp->set_rx_antenna(rx_op.ant);
 
-	check_tx_status(ref,usrp);
-	check_rx_status(ref,usrp,rx_op);
-	// create a transmit streamer
+	//5 检查状态
+	if (tx_op.docheck)	check_tx_status(ref,usrp);
+	if (rx_op.docheck)	check_rx_status(ref,usrp,rx_op);
+
+	//6.创建流对象实例
+	//6.1 发射
 	std::vector<size_t> channel_nums_tx;
 	uhd::stream_args_t stream_args_tx(tx_op.type, tx_op.wirefmt);
 	channel_nums_tx.push_back(tx_op.channel);
 	stream_args_tx.channels             = channel_nums_tx;
 	tx_streamer::sptr tx_stream = usrp->get_tx_stream(stream_args_tx);
-
-	// create a receive streamer
+	// 6.2 接收
 	uhd::stream_args_t stream_args_rx(rx_op.type, rx_op.wirefmt);
 	std::vector<size_t> channel_nums_rx;
 	channel_nums_rx.push_back(rx_op.channel);
 	stream_args_rx.channels             = channel_nums_rx;
 	rx_streamer::sptr rx_stream = usrp->get_rx_stream(stream_args_rx);
 
-
+	//开始收发循环
 	do_io<short>(rx_op,tx_op,rx_stream,tx_stream);
 
 	// finished