- 04 11月, 2020 1 次提交
-
-
由 Me No Dev 提交于
-
- 03 11月, 2020 22 次提交
-
-
由 lbernstone 提交于
Checks to see if a string is a key in the namespace. Fixes #4440
-
由 Mark D 提交于
* fix typo in WiFiMulti * clean up trailing spaces * clean up script file used in cleaning Co-authored-by: NMe No Dev <me-no-dev@users.noreply.github.com>
-
由 Denys Fedoryshchenko 提交于
This patch fixes update timeouts (error #6) on slow HTTP/HTTPS links.
-
由 HACKER3000 提交于
* Add more options to the AI thinker cam. The reason is power saving and compatibility of cheap chines clones with crappy flash chips.
-
由 saknarak 提交于
* improve & fix BLEScan when too many BLE devices - when wantDuplicates, no need to check duplicate and no more insert into vector - delete advertisedDevice when not insert into vector, fix memory leak - add showParse when you just want raw advertised data
-
由 Jorropo 提交于
Closes #4111. gcc: I was not able to find an arm64 build on espressif's website so I choosed to put the armhf version, even if this should works this is only ok as temporary, arm64 runs better on arm64 than armhf :) esptool: being interpreted python its ok mkspiff: need igrr/mkspiffs#74 to be merged and artifacts added in /package/package_esp32_index.template.json.
-
由 Ivorius 提交于
Add sdkconfig option CONFIG_ARDUINO_UDP_TASK_PRIORITY, which sets the task priority for the UDP vtask." (#4131)
-
由 buxtronix 提交于
Remove device from Peer list if connection fails. Only call onConnect callback if connection was successful. Only call onDisconnect callback if the connection was previously connected (ESP_GATTC_DISCONNECT_EVT is fired on a unsuccessful connection attempt also). Resolves a number of issues with phantom events and callbacks being fired.
-
由 buxtronix 提交于
::addPeerDevice and ::removePeerDevice are called with m_appId, so should ::updatePeerDevice as all use the same parameter for the underlying map's key.
-
由 Me No Dev 提交于
fixes #4454 closes #4455
-
由 Ernst Sikora 提交于
* Fix for issue #4158: Crash with stack trace originating in Bluedroid Improved configuration of scan response data in 'BLEAdvertising' avoids the crash: - Added member variable 'm_scanRespData' to configure scan response differently from advertising data - Initialization of 'm_scanRespData' in BLEAdvertising constructor - Use of 'm_scanRespData' within BLEAdvertising::start() to configure the scan response - 'Flags' and 'Appearance' are cleared in the scan response data - With this fix, device names of up to 29 characters can be used without causing a crash.
-
由 Niklas Mollenhauer 提交于
The web server currently lacks the ability to send a buffer. Only strings are supported. This PR adds an overload to sendContent.
-
由 Hristo Kapanakov 提交于
-
由 lbernstone 提交于
Make options list into a table
-
由 Ivan Golubic 提交于
Fixes: #3460 This code has been run in production for 1 month and it looks stable, no data dropped and it definitely fixes the issue described. I think that this can be merged to avoid using custom package referencing in PlatformIO that has been used in quite a few projects for now. Co-authored-by: NIvan Golubic <ivan@mvt-solutions.com>
-
由 Me No Dev 提交于
Add flash helper constructor to Uri
-
由 thewavelength 提交于
Add partition label argument to Update and ArduinoOTA classThe UpdateClass in the Updater component has the ability to update data toa SPIFFS partition. It selects the first available partition using theESP-IDF esp_partition_find_first() function.That behaviour is problematic if one has multiple SPIFFS partitions.This change allows a user to pass the label argument (defaults to NULL)to UpdateClass::begin() so a specific SPIFFS partition can be updated.Additionally, ArduinoOTA can set this partition label using thenew method ArduinoOTAClass::setPartitionLabel which is optional.This change does not break compatibility. (#4442) The UpdateClass in the Updater component has the ability to update data to a SPIFFS partition. It selects the first available partition using the ESP-IDF esp_partition_find_first() function. That behaviour is problematic if one has multiple SPIFFS partitions. This change allows a user to pass the label argument (defaults to NULL) to UpdateClass::begin() so a specific SPIFFS partition can be updated. Additionally, ArduinoOTA can set this partition label using the new method ArduinoOTAClass::setPartitionLabel which is optional. This change does not break compatibility.
-
由 thewavelength 提交于
* Add partition label argument to SPIFFSSPIFFS currently assumes there is only ever one partition.This change allows a user to pass the label argument (defaults to NULL)to SPIFFS::begin() so a specific SPIFFS partition can be referenced.This change does not break compatibility.
-
由 Jimmy Durand Wesolowski 提交于
* BLERemoteChar: fix descriptor 2902 write for characteristic notifications When registering a notification on a characteristic, the 2902 descriptor (CCCD) value is set to 1 (or 2 for indication). According to the BLUETOOTH CORE SPECIFICATION Version 5.2, Revision Date 2019-12-31, section 4.12.3 "Write Characteristic Descriptors" (page 1588), the characteristic descriptor write must expect a response. Currently, the descriptor write is performed without expecting a reponse, which prevents the notification to be functional with some BLE stacks. This commit modify the write to expect the response. Signed-off-by: NJimmy Durand Wesolowski <jimmy.durand.wesolowski@commsolid.com> * BLERemoteChar: forward GATT client event to characteristic descriptors This commits prevents a permanent wait when calling BLERemoteDescriptor readValue function, on the m_semaphoreReadDescrEvt semaphore. ESP32 BLE stack calls to remote characteristic - notification, - value read - value write and remote characteristic descriptor - value read are asynchronous. When such a call is performed by this library, a semaphore is taken prior to the BLE stack read or write operation, and waited on after it. Releasing the semaphore is done by the characteristic event handling function (gattClientEventHandler), when the appropriate event is received. However, the characteristic descriptor events are discarded, and the value read semaphore is never released. This commits forwards the GATT client events from the remote characteristic down to their remote characteristic descriptor, and implements their event handling. Adding a semaphore for the remote characteristic descriptor value write will be done in a separate commit. Signed-off-by: NJimmy Durand Wesolowski <jimmy.durand.wesolowski@commsolid.com> * BLERemoteDescriptor: add semaphore to characteristic descriptor write This adds a semaphore to characteristic descriptor value write, to mimic the value read function, and to ensure completion of the operation before we carry on. Signed-off-by: NJimmy Durand Wesolowski <jimmy.durand.wesolowski@commsolid.com> Co-authored-by: NJimmy Durand Wesolowski <jimmy.durand.wesolowski@commsolid.com>
-
由 Muhammad Mobashir 提交于
esp8266 --> esp32
-
由 snosrap 提交于
fixes: #4472
-
- 27 10月, 2020 2 次提交
- 19 10月, 2020 1 次提交
-
-
由 Bob Mooij 提交于
-
- 17 10月, 2020 1 次提交
-
-
由 Valerii Koval 提交于
Fixes possible issues with assembly files in external libraries
-
- 14 10月, 2020 9 次提交
-
-
由 Alexandre Trevizoli 提交于
* Corrections of Find, FindUntil and FindMulti Find has some bug that is not working with Ethernet.find() so, I copied code from Stream.h and Stream.cpp in AVR-CORE library and now it's working perfectly. I don't know where was the error, but an Ethernet.find compiled to MEGA2560 was working but not working when compiled to esp32, after corrections of code (copy of AVR-Core libraries) it's working perfect. So probably has some error on original ESP32-Core library. Below is part of code that was working with MEGA2560 and not with ESP32 libraries. client.find never return TRUE with ESP32 original library and with AVR it's works. boolean esp32_fw_update(EthernetClient &client, DecodedHeader &header, const String &field_filename, const String &field_crc) { char bound[header.boundary.length()+3]; char term[]="\r\n"; strcpy(bound,header.boundary.c_str()); strcat(bound,term); while (client.find(bound)) { String line=client.readStringUntil('\r'); * Update Stream.h * Update Stream.cpp Co-authored-by: NMe No Dev <me-no-dev@users.noreply.github.com>
-
由 Dirk-Willem van Gulik 提交于
* Add an aditional (void *) arg to the RMT callback - to allow more flexible handling of the callback (e.g. by passing a private struct or a class pointer). Same pattern as used by the Ticker() and many others. Example updated & new example with a trapoline added. * Fix example for new API * Fix lint warnings * Add a second missed example. * Correct timeout & improve socket error handling.
-
由 Marco Sirabella 提交于
This is in line with the [arduino platform specification](https://arduino.github.io/arduino-cli/platform-specification/#recipes-for-extraction-of-executable-files-and-other-binary-data) specifying that the file extension after recipe.objcopy is arbitrary and that the AVR platform uses `eep` & `hex`, while the esp32 platform seems to have file extensions `partition.bin` & `bin`
-
由 Dan Oprescu 提交于
Fix support for following redirects added by ee88c42c (#4240) (#4385)
-
由 Andrey 提交于
-
由 programminghoch10 提交于
-
由 programminghoch10 提交于
* fix typos * made return value description a bit more helpful
-
由 Saptarsi Saha 提交于
* Updated Readme.md Added links to latest release. Made it look a lot cleaner. * Update README.md
-
由 Vo Linh Truc 提交于
I met problem while I was working with the WiFiClientSecure. I tried to found the source of the problem, and I found it in the sll_client.cpp. Please check my contribution. I've open this problem in #4335 but received no response.
-
- 03 10月, 2020 4 次提交
-
-
由 TANAKA Masayuki 提交于
-
由 Alex 提交于
-
由 Shawn A 提交于
-
由 Pakpoom Eiamsouyngam 提交于
Please add OpenKB Board Product from INEX Co. Ltd. https://inex.co.th/shop/openkb.html
-