Skip to content

R
rt-thread

人间散章 / rt-thread
与 Fork 源项目一致

Fork自 RT-Thread / rt-thread

通知 1
Star 1
Fork 0
R
rt-thread

体验新版 GitCode，发现更多精彩内容 >>

提交 ea8e676f 编写于 作者: Y yungchi@cs.nctu.edu.tw
浏览文件
操作

move driver Dependency files into Driver folder 

git-svn-id: https://rt-thread.googlecode.com/svn/trunk@2083 bbd45198-f89e-11dd-88c7-29a3b14d5316
上级 bfad5e60
展开全部 隐藏空白更改
内联 并排
Showing with 1 addition and 5258 deletion
bsp/stm32f20x/Drivers/FM25Lx.h
浏览文件 @ ea8e676f
......@@ -15,7 +15,7 @@
#ifdef FM25CL64B
#define FM25_MAXSIZE 8192
#elif define(FM25LC256)
#elif defined(FM25LC256)
#define FM25_MAXSIZE 32768
#endif
......
bsp/stm32f20x/application.c 已删除 100644 → 0
浏览文件 @ bfad5e60
/*
* File : application.c
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2006, RT-Thread Development Team
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rt-thread.org/license/LICENSE
*
* Change Logs:
* Date Author Notes
* 2009-01-05 Bernard the first version
*/
/**
* @addtogroup STM32
*/
/*@{*/
#include <board.h>
#include <rtthread.h>
#include "stm32f2xx_eth.h"
#ifdef RT_USING_DFS
/* dfs init */
#include <dfs_init.h>
/* dfs filesystem:ELM filesystem init */
#include <dfs_elm.h>
/* dfs Filesystem APIs */
#include <dfs_fs.h>
#endif
#ifdef RT_USING_LWIP
#include <lwip/sys.h>
#include <lwip/api.h>
#include <netif/ethernetif.h>
#endif
void rt_init_thread_entry(void* parameter)
{
/* Filesystem Initialization */
#ifdef RT_USING_DFS
{
/* init the device filesystem */
dfs_init();
#ifdef RT_USING_DFS_ELMFAT
/* init the elm chan FatFs filesystam*/
elm_init();
/* mount sd card fat partition 1 as root directory */
if (dfs_mount("sd0", "/", "elm", 0, 0) == 0)
{
rt_kprintf("File System initialized!\n");
}
else
rt_kprintf("File System initialzation failed!\n");
#endif
}
#endif
/* LwIP Initialization */
#ifdef RT_USING_LWIP
{
extern void lwip_sys_init(void);
/* register ethernetif device */
eth_system_device_init();
/* initialize eth interface */
rt_hw_stm32_eth_init();
/* re-init device driver */
rt_device_init_all();
/* init lwip system */
lwip_sys_init();
rt_kprintf("TCP/IP initialized!\n");
}
#endif
}
int rt_application_init()
{
rt_thread_t tid;
tid = rt_thread_create("init",
rt_init_thread_entry, RT_NULL,
2048, RT_THREAD_PRIORITY_MAX/3, 20);
if (tid != RT_NULL)
rt_thread_startup(tid);
return 0;
}
/*@}*/
bsp/stm32f20x/board.c 已删除 100644 → 0
浏览文件 @ bfad5e60
/*
* File : board.c
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2009 RT-Thread Develop Team
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rt-thread.org/license/LICENSE
*
* Change Logs:
* Date Author Notes
* 2009-01-05 Bernard first implementation
*/
#include <rthw.h>
#include <rtthread.h>
#include "board.h"
/**
* @addtogroup STM32
*/
/*@{*/
#if STM32_USE_SDIO
/**
* @brief DeInitializes the SDIO interface.
* @param None
* @retval None
*/
void SD_LowLevel_DeInit(void)
{
GPIO_InitTypeDef GPIO_InitStructure;
/*!< Disable SDIO Clock */
SDIO_ClockCmd(DISABLE);
/*!< Set Power State to OFF */
SDIO_SetPowerState(SDIO_PowerState_OFF);
/*!< DeInitializes the SDIO peripheral */
SDIO_DeInit();
/* Disable the SDIO APB2 Clock */
RCC_APB2PeriphClockCmd(RCC_APB2Periph_SDIO, DISABLE);
GPIO_PinAFConfig(GPIOC, GPIO_PinSource8, GPIO_AF_MCO);
GPIO_PinAFConfig(GPIOC, GPIO_PinSource9, GPIO_AF_MCO);
GPIO_PinAFConfig(GPIOC, GPIO_PinSource10, GPIO_AF_MCO);
GPIO_PinAFConfig(GPIOC, GPIO_PinSource11, GPIO_AF_MCO);
GPIO_PinAFConfig(GPIOC, GPIO_PinSource12, GPIO_AF_MCO);
GPIO_PinAFConfig(GPIOD, GPIO_PinSource2, GPIO_AF_MCO);
/* Configure PC.08, PC.09, PC.10, PC.11 pins: D0, D1, D2, D3 pins */
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_8 | GPIO_Pin_9 | GPIO_Pin_10 | GPIO_Pin_11;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN;
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
GPIO_Init(GPIOC, &GPIO_InitStructure);
/* Configure PD.02 CMD line */
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_2;
GPIO_Init(GPIOD, &GPIO_InitStructure);
/* Configure PC.12 pin: CLK pin */
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_12;
GPIO_Init(GPIOC, &GPIO_InitStructure);
}
/**
* @brief Initializes the SD Card and put it into StandBy State (Ready for
* data transfer).
* @param None
* @retval None
*/
void SD_LowLevel_Init(void)
{
GPIO_InitTypeDef GPIO_InitStructure;
/* GPIOC and GPIOD Periph clock enable */
RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOC | RCC_AHB1Periph_GPIOD | SD_DETECT_GPIO_CLK, ENABLE);
GPIO_PinAFConfig(GPIOC, GPIO_PinSource8, GPIO_AF_SDIO);
GPIO_PinAFConfig(GPIOC, GPIO_PinSource9, GPIO_AF_SDIO);
GPIO_PinAFConfig(GPIOC, GPIO_PinSource10, GPIO_AF_SDIO);
GPIO_PinAFConfig(GPIOC, GPIO_PinSource11, GPIO_AF_SDIO);
GPIO_PinAFConfig(GPIOC, GPIO_PinSource12, GPIO_AF_SDIO);
GPIO_PinAFConfig(GPIOD, GPIO_PinSource2, GPIO_AF_SDIO);
/* Configure PC.08, PC.09, PC.10, PC.11 pins: D0, D1, D2, D3 pins */
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_8 | GPIO_Pin_9 | GPIO_Pin_10 | GPIO_Pin_11;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_25MHz;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;
GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_UP;
GPIO_Init(GPIOC, &GPIO_InitStructure);
/* Configure PD.02 CMD line */
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_2;
GPIO_Init(GPIOD, &GPIO_InitStructure);
/* Configure PC.12 pin: CLK pin */
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_12;
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
GPIO_Init(GPIOC, &GPIO_InitStructure);
/*!< Configure SD_SPI_DETECT_PIN pin: SD Card detect pin */
GPIO_InitStructure.GPIO_Pin = SD_DETECT_PIN;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN;
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_UP;
GPIO_Init(SD_DETECT_GPIO_PORT, &GPIO_InitStructure);
/* Enable the SDIO APB2 Clock */
RCC_APB2PeriphClockCmd(RCC_APB2Periph_SDIO, ENABLE);
/* Enable the DMA2 Clock */
RCC_AHB1PeriphClockCmd(SD_SDIO_DMA_CLK, ENABLE);
}
/**
* @brief Configures the DMA2 Channel4 for SDIO Tx request.
* @param BufferSRC: pointer to the source buffer
* @param BufferSize: buffer size
* @retval None
*/
void SD_LowLevel_DMA_TxConfig(uint32_t *BufferSRC, uint32_t BufferSize)
{
DMA_InitTypeDef SDDMA_InitStructure;
DMA_ClearFlag(SD_SDIO_DMA_STREAM, SD_SDIO_DMA_FLAG_FEIF | SD_SDIO_DMA_FLAG_DMEIF | SD_SDIO_DMA_FLAG_TEIF | SD_SDIO_DMA_FLAG_HTIF | SD_SDIO_DMA_FLAG_TCIF);
/* DMA2 Stream3 or Stream6 disable */
DMA_Cmd(SD_SDIO_DMA_STREAM, DISABLE);
/* DMA2 Stream3 or Stream6 Config */
DMA_DeInit(SD_SDIO_DMA_STREAM);
SDDMA_InitStructure.DMA_Channel = SD_SDIO_DMA_CHANNEL;
SDDMA_InitStructure.DMA_PeripheralBaseAddr = (uint32_t)SDIO_FIFO_ADDRESS;
SDDMA_InitStructure.DMA_Memory0BaseAddr = (uint32_t)BufferSRC;
SDDMA_InitStructure.DMA_DIR = DMA_DIR_MemoryToPeripheral;
SDDMA_InitStructure.DMA_BufferSize = 0;
SDDMA_InitStructure.DMA_PeripheralInc = DMA_PeripheralInc_Disable;
SDDMA_InitStructure.DMA_MemoryInc = DMA_MemoryInc_Enable;
SDDMA_InitStructure.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Word;
SDDMA_InitStructure.DMA_MemoryDataSize = DMA_MemoryDataSize_Word;
SDDMA_InitStructure.DMA_Mode = DMA_Mode_Normal;
SDDMA_InitStructure.DMA_Priority = DMA_Priority_VeryHigh;
SDDMA_InitStructure.DMA_FIFOMode = DMA_FIFOMode_Enable;
SDDMA_InitStructure.DMA_FIFOThreshold = DMA_FIFOThreshold_Full;
SDDMA_InitStructure.DMA_MemoryBurst = DMA_MemoryBurst_INC4;
SDDMA_InitStructure.DMA_PeripheralBurst = DMA_PeripheralBurst_INC4;
DMA_Init(SD_SDIO_DMA_STREAM, &SDDMA_InitStructure);
DMA_FlowControllerConfig(SD_SDIO_DMA_STREAM, DMA_FlowCtrl_Peripheral);
/* DMA2 Stream3 or Stream6 enable */
DMA_Cmd(SD_SDIO_DMA_STREAM, ENABLE);
}
/**
* @brief Configures the DMA2 Channel4 for SDIO Rx request.
* @param BufferDST: pointer to the destination buffer
* @param BufferSize: buffer size
* @retval None
*/
void SD_LowLevel_DMA_RxConfig(uint32_t *BufferDST, uint32_t BufferSize)
{
DMA_InitTypeDef SDDMA_InitStructure;
DMA_ClearFlag(SD_SDIO_DMA_STREAM, SD_SDIO_DMA_FLAG_FEIF | SD_SDIO_DMA_FLAG_DMEIF | SD_SDIO_DMA_FLAG_TEIF | SD_SDIO_DMA_FLAG_HTIF | SD_SDIO_DMA_FLAG_TCIF);
/* DMA2 Stream3 or Stream6 disable */
DMA_Cmd(SD_SDIO_DMA_STREAM, DISABLE);
/* DMA2 Stream3 or Stream6 Config */
DMA_DeInit(SD_SDIO_DMA_STREAM);
SDDMA_InitStructure.DMA_Channel = SD_SDIO_DMA_CHANNEL;
SDDMA_InitStructure.DMA_PeripheralBaseAddr = (uint32_t)SDIO_FIFO_ADDRESS;
SDDMA_InitStructure.DMA_Memory0BaseAddr = (uint32_t)BufferDST;
SDDMA_InitStructure.DMA_DIR = DMA_DIR_PeripheralToMemory;
SDDMA_InitStructure.DMA_BufferSize = 0;
SDDMA_InitStructure.DMA_PeripheralInc = DMA_PeripheralInc_Disable;
SDDMA_InitStructure.DMA_MemoryInc = DMA_MemoryInc_Enable;
SDDMA_InitStructure.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Word;
SDDMA_InitStructure.DMA_MemoryDataSize = DMA_MemoryDataSize_Word;
SDDMA_InitStructure.DMA_Mode = DMA_Mode_Normal;
SDDMA_InitStructure.DMA_Priority = DMA_Priority_VeryHigh;
SDDMA_InitStructure.DMA_FIFOMode = DMA_FIFOMode_Enable;
SDDMA_InitStructure.DMA_FIFOThreshold = DMA_FIFOThreshold_Full;
SDDMA_InitStructure.DMA_MemoryBurst = DMA_MemoryBurst_INC4;
SDDMA_InitStructure.DMA_PeripheralBurst = DMA_PeripheralBurst_INC4;
DMA_Init(SD_SDIO_DMA_STREAM, &SDDMA_InitStructure);
DMA_FlowControllerConfig(SD_SDIO_DMA_STREAM, DMA_FlowCtrl_Peripheral);
/* DMA2 Stream3 or Stream6 enable */
DMA_Cmd(SD_SDIO_DMA_STREAM, ENABLE);
}
/**
* @brief Returns the DMA End Of Transfer Status.
* @param None
* @retval DMA SDIO Stream Status.
*/
uint32_t SD_DMAEndOfTransferStatus(void)
{
return (uint32_t)DMA_GetFlagStatus(SD_SDIO_DMA_STREAM, SD_SDIO_DMA_FLAG_TCIF);
}
#endif
/*******************************************************************************
* Function Name : NVIC_Configuration
* Description : Configures Vector Table base location.
* Input : None
* Output : None
* Return : None
*******************************************************************************/
void NVIC_Configuration(void)
{
#ifdef VECT_TAB_RAM
/* Set the Vector Table base location at 0x20000000 */
NVIC_SetVectorTable(NVIC_VectTab_RAM, 0x0);
#else /* VECT_TAB_FLASH */
/* Set the Vector Table base location at 0x08000000 */
NVIC_SetVectorTable(NVIC_VectTab_FLASH, 0x0);
#endif
}
/*******************************************************************************
* Function Name : SysTick_Configuration
* Description : Configures the SysTick for OS tick.
* Input : None
* Output : None
* Return : None
*******************************************************************************/
void SysTick_Configuration(void)
{
RCC_ClocksTypeDef rcc_clocks;
rt_uint32_t cnts;
RCC_GetClocksFreq(&rcc_clocks);
cnts = (rt_uint32_t)rcc_clocks.HCLK_Frequency / RT_TICK_PER_SECOND;
SysTick_Config(cnts);
SysTick_CLKSourceConfig(SysTick_CLKSource_HCLK);
}
/**
* This is the timer interrupt service routine.
*
*/
void SysTick_Handler(void)
{
/* enter interrupt */
rt_interrupt_enter();
rt_tick_increase();
/* leave interrupt */
rt_interrupt_leave();
}
/**
* This function will initial STM32 board.
*/
void rt_hw_board_init()
{
/* NVIC Configuration */
NVIC_Configuration();
/* Configure the SysTick */
SysTick_Configuration();
rt_hw_usart_init();
#ifdef RT_USING_CONSOLE
rt_console_set_device(CONSOLE_DEVICE);
#endif
}
/*@}*/
bsp/stm32f20x/board.h 已删除 100644 → 0
浏览文件 @ bfad5e60
/*
* File : board.h
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2009, RT-Thread Development Team
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rt-thread.org/license/LICENSE
*
* Change Logs:
* Date Author Notes
* 2009-09-22 Bernard add board.h to this bsp
*/
// <<< Use Configuration Wizard in Context Menu >>>
#ifndef __BOARD_H__
#define __BOARD_H__
#include <stm32f2xx.h>
/* board configuration */
// <o> SDCard Driver <1=>SDIO sdcard <0=>SPI MMC card
// <i>Default: 1
#define STM32_USE_SDIO 1
/* whether use board external SRAM memory */
// <e>Use external SRAM memory on the board
// <i>Enable External SRAM memory
#define STM32_EXT_SRAM 0
// <o>Begin Address of External SRAM
// <i>Default: 0x68000000
#define STM32_EXT_SRAM_BEGIN 0x68000000 /* the begining address of external SRAM */
// <o>End Address of External SRAM
// <i>Default: 0x68080000
#define STM32_EXT_SRAM_END 0x68080000 /* the end address of external SRAM */
// </e>
// <o> Internal SRAM memory size[Kbytes] <8-128>
// <i>Default: 64
#define STM32_SRAM_SIZE 128
#define STM32_SRAM_END (0x20000000 + STM32_SRAM_SIZE * 1024)
// <o> Console on USART: <0=> no console <1=>USART 1 <2=>USART 2 <3=> USART 3
// <i>Default: 1
#define STM32_CONSOLE_USART 1
// <o> Ethernet Interface: <0=> Microchip ENC28J60
#define STM32_ETH_IF 0
void rt_hw_board_led_on(int n);
void rt_hw_board_led_off(int n);
void rt_hw_board_init(void);
#if STM32_CONSOLE_USART == 0
#define CONSOLE_DEVICE "no"
#elif STM32_CONSOLE_USART == 1
#define CONSOLE_DEVICE "uart1"
#elif STM32_CONSOLE_USART == 2
#define CONSOLE_DEVICE "uart2"
#elif STM32_CONSOLE_USART == 3
#define CONSOLE_DEVICE "uart3"
#endif
#if STM32_USE_SDIO
/**
* @brief SD FLASH SDIO Interface
*/
#define SD_DETECT_PIN GPIO_Pin_0 /* PB.0 */
#define SD_DETECT_GPIO_PORT GPIOB /* GPIOB */
#define SD_DETECT_GPIO_CLK RCC_AHB1Periph_GPIOB
#define SDIO_FIFO_ADDRESS ((uint32_t)0x40012C80)
/**
* @brief SDIO Intialization Frequency (400KHz max)
*/
#define SDIO_INIT_CLK_DIV ((uint8_t)0x76)
/**
* @brief SDIO Data Transfer Frequency (25MHz max)
*/
#define SDIO_TRANSFER_CLK_DIV ((uint8_t)0x0)
#define SD_SDIO_DMA DMA2
#define SD_SDIO_DMA_CLK RCC_AHB1Periph_DMA2
#define SD_SDIO_DMA_STREAM3 3
//#define SD_SDIO_DMA_STREAM6 6
#ifdef SD_SDIO_DMA_STREAM3
#define SD_SDIO_DMA_STREAM DMA2_Stream3
#define SD_SDIO_DMA_CHANNEL DMA_Channel_4
#define SD_SDIO_DMA_FLAG_FEIF DMA_FLAG_FEIF3
#define SD_SDIO_DMA_FLAG_DMEIF DMA_FLAG_DMEIF3
#define SD_SDIO_DMA_FLAG_TEIF DMA_FLAG_TEIF3
#define SD_SDIO_DMA_FLAG_HTIF DMA_FLAG_HTIF3
#define SD_SDIO_DMA_FLAG_TCIF DMA_FLAG_TCIF3
#elif defined SD_SDIO_DMA_STREAM6
#define SD_SDIO_DMA_STREAM DMA2_Stream6
#define SD_SDIO_DMA_CHANNEL DMA_Channel_4
#define SD_SDIO_DMA_FLAG_FEIF DMA_FLAG_FEIF6
#define SD_SDIO_DMA_FLAG_DMEIF DMA_FLAG_DMEIF6
#define SD_SDIO_DMA_FLAG_TEIF DMA_FLAG_TEIF6
#define SD_SDIO_DMA_FLAG_HTIF DMA_FLAG_HTIF6
#define SD_SDIO_DMA_FLAG_TCIF DMA_FLAG_TCIF6
#endif /* SD_SDIO_DMA_STREAM3 */
void SD_LowLevel_DeInit(void);
void SD_LowLevel_Init(void);
void SD_LowLevel_DMA_TxConfig(uint32_t *BufferSRC, uint32_t BufferSize);
void SD_LowLevel_DMA_RxConfig(uint32_t *BufferDST, uint32_t BufferSize);
#endif
void rt_hw_usart_init(void);
/* SD Card init function */
void rt_hw_msd_init(void);
/* ETH interface init function */
#endif
// <<< Use Configuration Wizard in Context Menu >>>
bsp/stm32f20x/rtc.c 已删除 100644 → 0
浏览文件 @ bfad5e60
/*
* File : rtc.c
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2009, RT-Thread Development Team
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rt-thread.org/license/LICENSE
*
* Change Logs:
* Date Author Notes
* 2009-01-05 Bernard the first version
* 2011-11-26 aozima implementation time.
*/
#include <rtthread.h>
#include <stm32f2xx.h>
#include <time.h>
__IO uint32_t AsynchPrediv = 0, SynchPrediv = 0;
RTC_TimeTypeDef RTC_TimeStructure;
RTC_InitTypeDef RTC_InitStructure;
RTC_AlarmTypeDef RTC_AlarmStructure;
RTC_DateTypeDef RTC_DateStructure;
#define MINUTE 60
#define HOUR (60*MINUTE)
#define DAY (24*HOUR)
#define YEAR (365*DAY)
static int month[12] =
{
0,
DAY*(31),
DAY*(31+29),
DAY*(31+29+31),
DAY*(31+29+31+30),
DAY*(31+29+31+30+31),
DAY*(31+29+31+30+31+30),
DAY*(31+29+31+30+31+30+31),
DAY*(31+29+31+30+31+30+31+31),
DAY*(31+29+31+30+31+30+31+31+30),
DAY*(31+29+31+30+31+30+31+31+30+31),
DAY*(31+29+31+30+31+30+31+31+30+31+30)
};
static struct rt_device rtc;
static time_t rt_mktime(struct tm *tm)
{
long res;
int year;
year = tm->tm_year - 70;
res = YEAR * year + DAY * ((year + 1) / 4);
res += month[tm->tm_mon];
if (tm->tm_mon > 1 && ((year + 2) % 4))
res -= DAY;
res += DAY * (tm->tm_mday - 1);
res += HOUR * tm->tm_hour;
res += MINUTE * tm->tm_min;
res += tm->tm_sec;
return res;
}
static rt_err_t rt_rtc_open(rt_device_t dev, rt_uint16_t oflag)
{
if (dev->rx_indicate != RT_NULL)
{
/* Open Interrupt */
}
return RT_EOK;
}
static rt_size_t rt_rtc_read(rt_device_t dev, rt_off_t pos, void* buffer, rt_size_t size)
{
return 0;
}
static rt_err_t rt_rtc_control(rt_device_t dev, rt_uint8_t cmd, void *args)
{
time_t *time;
struct tm ti,*to;
RT_ASSERT(dev != RT_NULL);
switch (cmd)
{
case RT_DEVICE_CTRL_RTC_GET_TIME:
time = (time_t *)args;
/* read device */
//RTC_GetTimeStamp(RTC_Format_BIN, &RTC_TimeStructure, &RTC_DateStructure);
RTC_GetTime(RTC_Format_BIN, &RTC_TimeStructure);
RTC_GetDate(RTC_Format_BIN, &RTC_DateStructure);
ti.tm_sec = RTC_TimeStructure.RTC_Seconds;
ti.tm_min = RTC_TimeStructure.RTC_Minutes;
ti.tm_hour = RTC_TimeStructure.RTC_Hours;
//ti.tm_wday = (RTC_DateStructure.RTC_WeekDay==7)?0:RTC_DateStructure.RTC_WeekDay;
ti.tm_mon = RTC_DateStructure.RTC_Month -1;
ti.tm_mday = RTC_DateStructure.RTC_Date;
ti.tm_year = RTC_DateStructure.RTC_Year + 70;
*time = rt_mktime(&ti);
//*time = RTC_GetCounter();
break;
case RT_DEVICE_CTRL_RTC_SET_TIME:
{
time = (time_t *)args;
/* Enable the PWR clock */
RCC_APB1PeriphClockCmd(RCC_APB1Periph_PWR, ENABLE);
/* Allow access to RTC */
PWR_BackupAccessCmd(ENABLE);
/* Wait until last write operation on RTC registers has finished */
//RTC_WaitForLastTask();
/* Change the current time */
//RTC_SetCounter(*time);
to = localtime(time);
RTC_TimeStructure.RTC_Seconds = to->tm_sec;
RTC_TimeStructure.RTC_Minutes = to->tm_min;
RTC_TimeStructure.RTC_Hours = to->tm_hour;
//RTC_DateStructure.RTC_WeekDay =(ti->tm_wday==0)?7:ti->tm_wday;
RTC_DateStructure.RTC_Month = to->tm_mon + 1;
RTC_DateStructure.RTC_Date = to->tm_mday;
RTC_DateStructure.RTC_Year = to->tm_year - 70;
RTC_SetTime(RTC_Format_BIN, &RTC_TimeStructure);
RTC_SetDate(RTC_Format_BIN, &RTC_DateStructure);
/* Wait until last write operation on RTC registers has finished */
//RTC_WaitForLastTask();
RTC_WriteBackupRegister(RTC_BKP_DR1, 0xA5A5);
//BKP_WriteBackupRegister(BKP_DR1, 0xA5A5);
}
break;
}
return RT_EOK;
}
/*******************************************************************************
* Function Name : RTC_Configuration
* Description : Configures the RTC.
* Input : None
* Output : None
* Return : 0 reday,-1 error.
*******************************************************************************/
int RTC_Config(void)
{
u32 count=0x200000;
/* Enable the PWR clock */
RCC_APB1PeriphClockCmd(RCC_APB1Periph_PWR, ENABLE);
/* Allow access to RTC */
PWR_BackupAccessCmd(ENABLE);
RCC_LSEConfig(RCC_LSE_ON);
/* Wait till LSE is ready */
while ( (RCC_GetFlagStatus(RCC_FLAG_LSERDY) == RESET) && (--count) );
if ( count == 0 )
{
return -1;
}
/* Select the RTC Clock Source */
RCC_RTCCLKConfig(RCC_RTCCLKSource_LSE);
SynchPrediv = 0xFF;
AsynchPrediv = 0x7F;
/* Enable the RTC Clock */
RCC_RTCCLKCmd(ENABLE);
/* Wait for RTC APB registers synchronisation */
RTC_WaitForSynchro();
/* Enable The TimeStamp */
//RTC_TimeStampCmd(RTC_TimeStampEdge_Falling, ENABLE);
return 0;
}
int RTC_Configuration(void)
{
if(RTC_Config() < 0 )
return -1;
/* Set the Time */
RTC_TimeStructure.RTC_Hours = 0;
RTC_TimeStructure.RTC_Minutes = 0;
RTC_TimeStructure.RTC_Seconds = 0;
/* Set the Date */
RTC_DateStructure.RTC_Month = 1;
RTC_DateStructure.RTC_Date = 1;
RTC_DateStructure.RTC_Year = 0;
RTC_DateStructure.RTC_WeekDay = 4;
/* Calendar Configuration */
RTC_InitStructure.RTC_AsynchPrediv = AsynchPrediv;
RTC_InitStructure.RTC_SynchPrediv = SynchPrediv;
RTC_InitStructure.RTC_HourFormat = RTC_HourFormat_24;
RTC_Init(&RTC_InitStructure);
/* Set Current Time and Date */
RTC_SetTime(RTC_Format_BCD, &RTC_TimeStructure);
RTC_SetDate(RTC_Format_BCD, &RTC_DateStructure);
if (RTC_Init(&RTC_InitStructure) == ERROR)
return -1;
return 0;
}
void rt_hw_rtc_init(void)
{
rtc.type = RT_Device_Class_RTC;
if (RTC_ReadBackupRegister(RTC_BKP_DR1) != 0xA5A5)
{
rt_kprintf("rtc is not configured\n");
rt_kprintf("please configure with set_date and set_time\n");
if ( RTC_Configuration() != 0)
{
rt_kprintf("rtc configure fail...\r\n");
return ;
}
}
else
{
/* Wait for RTC registers synchronization */
RTC_WaitForSynchro();
}
/* register rtc device */
rtc.init = RT_NULL;
rtc.open = rt_rtc_open;
rtc.close = RT_NULL;
rtc.read = rt_rtc_read;
rtc.write = RT_NULL;
rtc.control = rt_rtc_control;
/* no private */
rtc.user_data = RT_NULL;
rt_device_register(&rtc, "rtc", RT_DEVICE_FLAG_RDWR);
return;
}
#include <time.h>
#if defined (__IAR_SYSTEMS_ICC__) && (__VER__) >= 6020000 /* for IAR 6.2 later Compiler */
#pragma module_name = "?time"
time_t (__time32)(time_t *t) /* Only supports 32-bit timestamp */
#else
time_t time(time_t* t)
#endif
{
rt_device_t device;
time_t time=0;
device = rt_device_find("rtc");
if (device != RT_NULL)
{
rt_device_control(device, RT_DEVICE_CTRL_RTC_GET_TIME, &time);
if (t != RT_NULL) *t = time;
}
return time;
}
#ifdef RT_USING_FINSH
#include <finsh.h>
void set_date(rt_uint32_t year, rt_uint32_t month, rt_uint32_t day)
{
time_t now;
struct tm* ti;
rt_device_t device;
ti = RT_NULL;
/* get current time */
time(&now);
ti = localtime(&now);
if (ti != RT_NULL)
{
ti->tm_year = year - 1900;
ti->tm_mon = month - 1; /* ti->tm_mon = month; */
ti->tm_mday = day;
}
now = mktime(ti);
device = rt_device_find("rtc");
if (device != RT_NULL)
{
rt_rtc_control(device, RT_DEVICE_CTRL_RTC_SET_TIME, &now);
}
}
FINSH_FUNCTION_EXPORT(set_date, set date. e.g: set_date(2010,2,28))
void set_time(rt_uint32_t hour, rt_uint32_t minute, rt_uint32_t second)
{
time_t now;
struct tm* ti;
rt_device_t device;
ti = RT_NULL;
/* get current time */
time(&now);
ti = localtime(&now);
if (ti != RT_NULL)
{
ti->tm_hour = hour;
ti->tm_min = minute;
ti->tm_sec = second;
}
now = mktime(ti);
device = rt_device_find("rtc");
if (device != RT_NULL)
{
rt_rtc_control(device, RT_DEVICE_CTRL_RTC_SET_TIME, &now);
}
}
FINSH_FUNCTION_EXPORT(set_time, set time. e.g: set_time(23,59,59))
void list_date()
{
time_t now;
time(&now);
rt_kprintf("%s\n", ctime(&now));
}
FINSH_FUNCTION_EXPORT(list_date, show date and time.)
#endif
bsp/stm32f20x/rtc.h 已删除 100644 → 0
浏览文件 @ bfad5e60
/*
* File : rtc.h
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2009, RT-Thread Development Team
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rt-thread.org/license/LICENSE
*
* Change Logs:
* Date Author Notes
* 2009-01-05 Bernard the first version
*/
#ifndef __RTC_H__
#define __RTC_H__
void rt_hw_rtc_init(void);
#endif
bsp/stm32f20x/sdio_sd.c 已删除 100644 → 0
浏览文件 @ bfad5e60
此差异已折叠。
bsp/stm32f20x/sdio_sd.h 已删除 100644 → 0
浏览文件 @ bfad5e60
/**
******************************************************************************
* @file stm32_eval_sdio_sd.h
* @author MCD Application Team
* @version V4.6.1
* @date 18-April-2011
* @brief This file contains all the functions prototypes for the SD Card
* stm32_eval_sdio_sd driver firmware library.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32_EVAL_SDIO_SD_H
#define __STM32_EVAL_SDIO_SD_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "board.h"
/** @addtogroup Utilities
* @{
*/
/** @addtogroup STM32_EVAL
* @{
*/
/** @addtogroup Common
* @{
*/
/** @addtogroup STM32_EVAL_SDIO_SD
* @{
*/
/** @defgroup STM32_EVAL_SDIO_SD_Exported_Types
* @{
*/
typedef enum
{
/**
* @brief SDIO specific error defines
*/
SD_CMD_CRC_FAIL = (1), /*!< Command response received (but CRC check failed) */
SD_DATA_CRC_FAIL = (2), /*!< Data bock sent/received (CRC check Failed) */
SD_CMD_RSP_TIMEOUT = (3), /*!< Command response timeout */
SD_DATA_TIMEOUT = (4), /*!< Data time out */
SD_TX_UNDERRUN = (5), /*!< Transmit FIFO under-run */
SD_RX_OVERRUN = (6), /*!< Receive FIFO over-run */
SD_START_BIT_ERR = (7), /*!< Start bit not detected on all data signals in widE bus mode */
SD_CMD_OUT_OF_RANGE = (8), /*!< CMD's argument was out of range.*/
SD_ADDR_MISALIGNED = (9), /*!< Misaligned address */
SD_BLOCK_LEN_ERR = (10), /*!< Transferred block length is not allowed for the card or the number of transferred bytes does not match the block length */
SD_ERASE_SEQ_ERR = (11), /*!< An error in the sequence of erase command occurs.*/
SD_BAD_ERASE_PARAM = (12), /*!< An Invalid selection for erase groups */
SD_WRITE_PROT_VIOLATION = (13), /*!< Attempt to program a write protect block */
SD_LOCK_UNLOCK_FAILED = (14), /*!< Sequence or password error has been detected in unlock command or if there was an attempt to access a locked card */
SD_COM_CRC_FAILED = (15), /*!< CRC check of the previous command failed */
SD_ILLEGAL_CMD = (16), /*!< Command is not legal for the card state */
SD_CARD_ECC_FAILED = (17), /*!< Card internal ECC was applied but failed to correct the data */
SD_CC_ERROR = (18), /*!< Internal card controller error */
SD_GENERAL_UNKNOWN_ERROR = (19), /*!< General or Unknown error */
SD_STREAM_READ_UNDERRUN = (20), /*!< The card could not sustain data transfer in stream read operation. */
SD_STREAM_WRITE_OVERRUN = (21), /*!< The card could not sustain data programming in stream mode */
SD_CID_CSD_OVERWRITE = (22), /*!< CID/CSD overwrite error */
SD_WP_ERASE_SKIP = (23), /*!< only partial address space was erased */
SD_CARD_ECC_DISABLED = (24), /*!< Command has been executed without using internal ECC */
SD_ERASE_RESET = (25), /*!< Erase sequence was cleared before executing because an out of erase sequence command was received */
SD_AKE_SEQ_ERROR = (26), /*!< Error in sequence of authentication. */
SD_INVALID_VOLTRANGE = (27),
SD_ADDR_OUT_OF_RANGE = (28),
SD_SWITCH_ERROR = (29),
SD_SDIO_DISABLED = (30),
SD_SDIO_FUNCTION_BUSY = (31),
SD_SDIO_FUNCTION_FAILED = (32),
SD_SDIO_UNKNOWN_FUNCTION = (33),
/**
* @brief Standard error defines
*/
SD_INTERNAL_ERROR,
SD_NOT_CONFIGURED,
SD_REQUEST_PENDING,
SD_REQUEST_NOT_APPLICABLE,
SD_INVALID_PARAMETER,
SD_UNSUPPORTED_FEATURE,
SD_UNSUPPORTED_HW,
SD_ERROR,
SD_OK = 0
} SD_Error;
/**
* @brief SDIO Transfer state
*/
typedef enum
{
SD_TRANSFER_OK = 0,
SD_TRANSFER_BUSY = 1,
SD_TRANSFER_ERROR
} SDTransferState;
/**
* @brief SD Card States
*/
typedef enum
{
SD_CARD_READY = ((uint32_t)0x00000001),
SD_CARD_IDENTIFICATION = ((uint32_t)0x00000002),
SD_CARD_STANDBY = ((uint32_t)0x00000003),
SD_CARD_TRANSFER = ((uint32_t)0x00000004),
SD_CARD_SENDING = ((uint32_t)0x00000005),
SD_CARD_RECEIVING = ((uint32_t)0x00000006),
SD_CARD_PROGRAMMING = ((uint32_t)0x00000007),
SD_CARD_DISCONNECTED = ((uint32_t)0x00000008),
SD_CARD_ERROR = ((uint32_t)0x000000FF)
}SDCardState;
/**
* @brief Card Specific Data: CSD Register
*/
typedef struct
{
__IO uint8_t CSDStruct; /*!< CSD structure */
__IO uint8_t SysSpecVersion; /*!< System specification version */
__IO uint8_t Reserved1; /*!< Reserved */
__IO uint8_t TAAC; /*!< Data read access-time 1 */
__IO uint8_t NSAC; /*!< Data read access-time 2 in CLK cycles */
__IO uint8_t MaxBusClkFrec; /*!< Max. bus clock frequency */
__IO uint16_t CardComdClasses; /*!< Card command classes */
__IO uint8_t RdBlockLen; /*!< Max. read data block length */
__IO uint8_t PartBlockRead; /*!< Partial blocks for read allowed */
__IO uint8_t WrBlockMisalign; /*!< Write block misalignment */
__IO uint8_t RdBlockMisalign; /*!< Read block misalignment */
__IO uint8_t DSRImpl; /*!< DSR implemented */
__IO uint8_t Reserved2; /*!< Reserved */
__IO uint32_t DeviceSize; /*!< Device Size */
__IO uint8_t MaxRdCurrentVDDMin; /*!< Max. read current @ VDD min */
__IO uint8_t MaxRdCurrentVDDMax; /*!< Max. read current @ VDD max */
__IO uint8_t MaxWrCurrentVDDMin; /*!< Max. write current @ VDD min */
__IO uint8_t MaxWrCurrentVDDMax; /*!< Max. write current @ VDD max */
__IO uint8_t DeviceSizeMul; /*!< Device size multiplier */
__IO uint8_t EraseGrSize; /*!< Erase group size */
__IO uint8_t EraseGrMul; /*!< Erase group size multiplier */
__IO uint8_t WrProtectGrSize; /*!< Write protect group size */
__IO uint8_t WrProtectGrEnable; /*!< Write protect group enable */
__IO uint8_t ManDeflECC; /*!< Manufacturer default ECC */
__IO uint8_t WrSpeedFact; /*!< Write speed factor */
__IO uint8_t MaxWrBlockLen; /*!< Max. write data block length */
__IO uint8_t WriteBlockPaPartial; /*!< Partial blocks for write allowed */
__IO uint8_t Reserved3; /*!< Reserded */
__IO uint8_t ContentProtectAppli; /*!< Content protection application */
__IO uint8_t FileFormatGrouop; /*!< File format group */
__IO uint8_t CopyFlag; /*!< Copy flag (OTP) */
__IO uint8_t PermWrProtect; /*!< Permanent write protection */
__IO uint8_t TempWrProtect; /*!< Temporary write protection */
__IO uint8_t FileFormat; /*!< File Format */
__IO uint8_t ECC; /*!< ECC code */
__IO uint8_t CSD_CRC; /*!< CSD CRC */
__IO uint8_t Reserved4; /*!< always 1*/
} SD_CSD;
/**
* @brief Card Identification Data: CID Register
*/
typedef struct
{
__IO uint8_t ManufacturerID; /*!< ManufacturerID */
__IO uint16_t OEM_AppliID; /*!< OEM/Application ID */
__IO uint32_t ProdName1; /*!< Product Name part1 */
__IO uint8_t ProdName2; /*!< Product Name part2*/
__IO uint8_t ProdRev; /*!< Product Revision */
__IO uint32_t ProdSN; /*!< Product Serial Number */
__IO uint8_t Reserved1; /*!< Reserved1 */
__IO uint16_t ManufactDate; /*!< Manufacturing Date */
__IO uint8_t CID_CRC; /*!< CID CRC */
__IO uint8_t Reserved2; /*!< always 1 */
} SD_CID;
/**
* @brief SD Card Status
*/
typedef struct
{
__IO uint8_t DAT_BUS_WIDTH;
__IO uint8_t SECURED_MODE;
__IO uint16_t SD_CARD_TYPE;
__IO uint32_t SIZE_OF_PROTECTED_AREA;
__IO uint8_t SPEED_CLASS;
__IO uint8_t PERFORMANCE_MOVE;
__IO uint8_t AU_SIZE;
__IO uint16_t ERASE_SIZE;
__IO uint8_t ERASE_TIMEOUT;
__IO uint8_t ERASE_OFFSET;
} SD_CardStatus;
/**
* @brief SD Card information
*/
typedef struct
{
SD_CSD SD_csd;
SD_CID SD_cid;
uint32_t CardCapacity; /*!< Card Capacity */
uint32_t CardBlockSize; /*!< Card Block Size */
uint16_t RCA;
uint8_t CardType;
} SD_CardInfo;
/**
* @}
*/
/** @defgroup STM32_EVAL_SDIO_SD_Exported_Constants
* @{
*/
/**
* @brief SDIO Commands Index
*/
#define SD_CMD_GO_IDLE_STATE ((uint8_t)0)
#define SD_CMD_SEND_OP_COND ((uint8_t)1)
#define SD_CMD_ALL_SEND_CID ((uint8_t)2)
#define SD_CMD_SET_REL_ADDR ((uint8_t)3) /*!< SDIO_SEND_REL_ADDR for SD Card */
#define SD_CMD_SET_DSR ((uint8_t)4)
#define SD_CMD_SDIO_SEN_OP_COND ((uint8_t)5)
#define SD_CMD_HS_SWITCH ((uint8_t)6)
#define SD_CMD_SEL_DESEL_CARD ((uint8_t)7)
#define SD_CMD_HS_SEND_EXT_CSD ((uint8_t)8)
#define SD_CMD_SEND_CSD ((uint8_t)9)
#define SD_CMD_SEND_CID ((uint8_t)10)
#define SD_CMD_READ_DAT_UNTIL_STOP ((uint8_t)11) /*!< SD Card doesn't support it */
#define SD_CMD_STOP_TRANSMISSION ((uint8_t)12)
#define SD_CMD_SEND_STATUS ((uint8_t)13)
#define SD_CMD_HS_BUSTEST_READ ((uint8_t)14)
#define SD_CMD_GO_INACTIVE_STATE ((uint8_t)15)
#define SD_CMD_SET_BLOCKLEN ((uint8_t)16)
#define SD_CMD_READ_SINGLE_BLOCK ((uint8_t)17)
#define SD_CMD_READ_MULT_BLOCK ((uint8_t)18)
#define SD_CMD_HS_BUSTEST_WRITE ((uint8_t)19)
#define SD_CMD_WRITE_DAT_UNTIL_STOP ((uint8_t)20) /*!< SD Card doesn't support it */
#define SD_CMD_SET_BLOCK_COUNT ((uint8_t)23) /*!< SD Card doesn't support it */
#define SD_CMD_WRITE_SINGLE_BLOCK ((uint8_t)24)
#define SD_CMD_WRITE_MULT_BLOCK ((uint8_t)25)
#define SD_CMD_PROG_CID ((uint8_t)26) /*!< reserved for manufacturers */
#define SD_CMD_PROG_CSD ((uint8_t)27)
#define SD_CMD_SET_WRITE_PROT ((uint8_t)28)
#define SD_CMD_CLR_WRITE_PROT ((uint8_t)29)
#define SD_CMD_SEND_WRITE_PROT ((uint8_t)30)
#define SD_CMD_SD_ERASE_GRP_START ((uint8_t)32) /*!< To set the address of the first write
block to be erased. (For SD card only) */
#define SD_CMD_SD_ERASE_GRP_END ((uint8_t)33) /*!< To set the address of the last write block of the
continuous range to be erased. (For SD card only) */
#define SD_CMD_ERASE_GRP_START ((uint8_t)35) /*!< To set the address of the first write block to be erased.
(For MMC card only spec 3.31) */
#define SD_CMD_ERASE_GRP_END ((uint8_t)36) /*!< To set the address of the last write block of the
continuous range to be erased. (For MMC card only spec 3.31) */
#define SD_CMD_ERASE ((uint8_t)38)
#define SD_CMD_FAST_IO ((uint8_t)39) /*!< SD Card doesn't support it */
#define SD_CMD_GO_IRQ_STATE ((uint8_t)40) /*!< SD Card doesn't support it */
#define SD_CMD_LOCK_UNLOCK ((uint8_t)42)
#define SD_CMD_APP_CMD ((uint8_t)55)
#define SD_CMD_GEN_CMD ((uint8_t)56)
#define SD_CMD_NO_CMD ((uint8_t)64)
/**
* @brief Following commands are SD Card Specific commands.
* SDIO_APP_CMD should be sent before sending these commands.
*/
#define SD_CMD_APP_SD_SET_BUSWIDTH ((uint8_t)6) /*!< For SD Card only */
#define SD_CMD_SD_APP_STAUS ((uint8_t)13) /*!< For SD Card only */
#define SD_CMD_SD_APP_SEND_NUM_WRITE_BLOCKS ((uint8_t)22) /*!< For SD Card only */
#define SD_CMD_SD_APP_OP_COND ((uint8_t)41) /*!< For SD Card only */
#define SD_CMD_SD_APP_SET_CLR_CARD_DETECT ((uint8_t)42) /*!< For SD Card only */
#define SD_CMD_SD_APP_SEND_SCR ((uint8_t)51) /*!< For SD Card only */
#define SD_CMD_SDIO_RW_DIRECT ((uint8_t)52) /*!< For SD I/O Card only */
#define SD_CMD_SDIO_RW_EXTENDED ((uint8_t)53) /*!< For SD I/O Card only */
/**
* @brief Following commands are SD Card Specific security commands.
* SDIO_APP_CMD should be sent before sending these commands.
*/
#define SD_CMD_SD_APP_GET_MKB ((uint8_t)43) /*!< For SD Card only */
#define SD_CMD_SD_APP_GET_MID ((uint8_t)44) /*!< For SD Card only */
#define SD_CMD_SD_APP_SET_CER_RN1 ((uint8_t)45) /*!< For SD Card only */
#define SD_CMD_SD_APP_GET_CER_RN2 ((uint8_t)46) /*!< For SD Card only */
#define SD_CMD_SD_APP_SET_CER_RES2 ((uint8_t)47) /*!< For SD Card only */
#define SD_CMD_SD_APP_GET_CER_RES1 ((uint8_t)48) /*!< For SD Card only */
#define SD_CMD_SD_APP_SECURE_READ_MULTIPLE_BLOCK ((uint8_t)18) /*!< For SD Card only */
#define SD_CMD_SD_APP_SECURE_WRITE_MULTIPLE_BLOCK ((uint8_t)25) /*!< For SD Card only */
#define SD_CMD_SD_APP_SECURE_ERASE ((uint8_t)38) /*!< For SD Card only */
#define SD_CMD_SD_APP_CHANGE_SECURE_AREA ((uint8_t)49) /*!< For SD Card only */
#define SD_CMD_SD_APP_SECURE_WRITE_MKB ((uint8_t)48) /*!< For SD Card only */
/* Uncomment the following line to select the SDIO Data transfer mode */
#define SD_DMA_MODE ((uint32_t)0x00000000)
/*#define SD_POLLING_MODE ((uint32_t)0x00000002)*/
/**
* @brief SD detection on its memory slot
*/
#define SD_PRESENT ((uint8_t)0x01)
#define SD_NOT_PRESENT ((uint8_t)0x00)
/**
* @brief Supported SD Memory Cards
*/
#define SDIO_STD_CAPACITY_SD_CARD_V1_1 ((uint32_t)0x00000000)
#define SDIO_STD_CAPACITY_SD_CARD_V2_0 ((uint32_t)0x00000001)
#define SDIO_HIGH_CAPACITY_SD_CARD ((uint32_t)0x00000002)
#define SDIO_MULTIMEDIA_CARD ((uint32_t)0x00000003)
#define SDIO_SECURE_DIGITAL_IO_CARD ((uint32_t)0x00000004)
#define SDIO_HIGH_SPEED_MULTIMEDIA_CARD ((uint32_t)0x00000005)
#define SDIO_SECURE_DIGITAL_IO_COMBO_CARD ((uint32_t)0x00000006)
#define SDIO_HIGH_CAPACITY_MMC_CARD ((uint32_t)0x00000007)
/**
* @}
*/
/** @defgroup STM32_EVAL_SDIO_SD_Exported_Macros
* @{
*/
/**
* @}
*/
/** @defgroup STM32_EVAL_SDIO_SD_Exported_Functions
* @{
*/
void SD_DeInit(void);
SD_Error SD_Init(void);
SDTransferState SD_GetStatus(void);
SDCardState SD_GetState(void);
uint8_t SD_Detect(void);
SD_Error SD_PowerON(void);
SD_Error SD_PowerOFF(void);
SD_Error SD_InitializeCards(void);
SD_Error SD_GetCardInfo(SD_CardInfo *cardinfo);
SD_Error SD_GetCardStatus(SD_CardStatus *cardstatus);
SD_Error SD_EnableWideBusOperation(uint32_t WideMode);
SD_Error SD_SelectDeselect(uint32_t addr);
SD_Error SD_ReadBlock(uint32_t ReadAddr, uint8_t *readbuff, uint16_t BlockSize);
SD_Error SD_ReadMultiBlocks(uint32_t ReadAddr, uint8_t *readbuff, uint16_t BlockSize, uint32_t NumberOfBlocks);
SD_Error SD_WriteBlock(uint32_t WriteAddr, uint8_t *writebuff, uint16_t BlockSize);
SD_Error SD_WriteMultiBlocks(uint32_t WriteAddr, uint8_t *writebuff, uint16_t BlockSize, uint32_t NumberOfBlocks);
SDTransferState SD_GetTransferState(void);
SD_Error SD_StopTransfer(void);
SD_Error SD_Erase(uint32_t startaddr, uint32_t endaddr);
SD_Error SD_SendStatus(uint32_t *pcardstatus);
SD_Error SD_SendSDStatus(uint32_t *psdstatus);
SD_Error SD_ProcessIRQSrc(void);
SD_Error SD_WaitReadOperation(void);
SD_Error SD_WaitWriteOperation(void);
#ifdef __cplusplus
}
#endif
#endif /* __STM32_EVAL_SDIO_SD_H */
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f20x/serial.c 已删除 100644 → 0
浏览文件 @ bfad5e60
/*
* File : serial.c
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2009, RT-Thread Development Team
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rt-thread.org/license/LICENSE
*
* Change Logs:
* Date Author Notes
* 2009-02-05 Bernard first version
* 2009-10-25 Bernard fix rt_serial_read bug when there is no data
* in the buffer.
* 2010-03-29 Bernard cleanup code.
*/
#include "serial.h"
#include <stm32f2xx_dma.h>
#include <stm32f2xx_usart.h>
static void rt_serial_enable_dma(DMA_Stream_TypeDef* dma_channel,
rt_uint32_t address, rt_uint32_t size);
/**
* @addtogroup STM32
*/
/*@{*/
/* RT-Thread Device Interface */
static rt_err_t rt_serial_init (rt_device_t dev)
{
struct stm32_serial_device* uart = (struct stm32_serial_device*) dev->user_data;
if (!(dev->flag & RT_DEVICE_FLAG_ACTIVATED))
{
if (dev->flag & RT_DEVICE_FLAG_INT_RX)
{
rt_memset(uart->int_rx->rx_buffer, 0,
sizeof(uart->int_rx->rx_buffer));
uart->int_rx->read_index = 0;
uart->int_rx->save_index = 0;
}
if (dev->flag & RT_DEVICE_FLAG_DMA_TX)
{
RT_ASSERT(uart->dma_tx->dma_channel != RT_NULL);
uart->dma_tx->list_head = uart->dma_tx->list_tail = RT_NULL;
/* init data node memory pool */
rt_mp_init(&(uart->dma_tx->data_node_mp), "dn",
uart->dma_tx->data_node_mem_pool,
sizeof(uart->dma_tx->data_node_mem_pool),
sizeof(struct stm32_serial_data_node));
}
/* Enable USART */
USART_Cmd(uart->uart_device, ENABLE);
dev->flag |= RT_DEVICE_FLAG_ACTIVATED;
}
return RT_EOK;
}
static rt_err_t rt_serial_open(rt_device_t dev, rt_uint16_t oflag)
{
return RT_EOK;
}
static rt_err_t rt_serial_close(rt_device_t dev)
{
return RT_EOK;
}
static rt_size_t rt_serial_read (rt_device_t dev, rt_off_t pos, void* buffer, rt_size_t size)
{
rt_uint8_t* ptr;
rt_err_t err_code;
struct stm32_serial_device* uart;
ptr = buffer;
err_code = RT_EOK;
uart = (struct stm32_serial_device*)dev->user_data;
if (dev->flag & RT_DEVICE_FLAG_INT_RX)
{
/* interrupt mode Rx */
while (size)
{
rt_base_t level;
/* disable interrupt */
level = rt_hw_interrupt_disable();
if (uart->int_rx->read_index != uart->int_rx->save_index)
{
/* read a character */
*ptr++ = uart->int_rx->rx_buffer[uart->int_rx->read_index];
size--;
/* move to next position */
uart->int_rx->read_index ++;
if (uart->int_rx->read_index >= UART_RX_BUFFER_SIZE)
uart->int_rx->read_index = 0;
}
else
{
/* set error code */
err_code = -RT_EEMPTY;
/* enable interrupt */
rt_hw_interrupt_enable(level);
break;
}
/* enable interrupt */
rt_hw_interrupt_enable(level);
}
}
else
{
/* polling mode */
while ((rt_uint32_t)ptr - (rt_uint32_t)buffer < size)
{
while (uart->uart_device->SR & USART_FLAG_RXNE)
{
*ptr = uart->uart_device->DR & 0xff;
ptr ++;
}
}
}
/* set error code */
rt_set_errno(err_code);
return (rt_uint32_t)ptr - (rt_uint32_t)buffer;
}
static void rt_serial_enable_dma(DMA_Stream_TypeDef* dma_channel,
rt_uint32_t address, rt_uint32_t size)
{
RT_ASSERT(dma_channel != RT_NULL);
/* disable DMA */
DMA_Cmd(dma_channel, DISABLE);
/* set buffer address */
dma_channel->M0AR = address;
/* set size */
dma_channel->NDTR = size;
/* enable DMA */
DMA_Cmd(dma_channel, ENABLE);
}
static rt_size_t rt_serial_write (rt_device_t dev, rt_off_t pos, const void* buffer, rt_size_t size)
{
rt_uint8_t* ptr;
rt_err_t err_code;
struct stm32_serial_device* uart;
err_code = RT_EOK;
ptr = (rt_uint8_t*)buffer;
uart = (struct stm32_serial_device*)dev->user_data;
if (dev->flag & RT_DEVICE_FLAG_INT_TX)
{
/* interrupt mode Tx, does not support */
RT_ASSERT(0);
}
else if (dev->flag & RT_DEVICE_FLAG_DMA_TX)
{
/* DMA mode Tx */
/* allocate a data node */
struct stm32_serial_data_node* data_node = (struct stm32_serial_data_node*)
rt_mp_alloc (&(uart->dma_tx->data_node_mp), RT_WAITING_FOREVER);
if (data_node == RT_NULL)
{
/* set error code */
err_code = -RT_ENOMEM;
}
else
{
rt_uint32_t level;
/* fill data node */
data_node->data_ptr = ptr;
data_node->data_size = size;
/* insert to data link */
data_node->next = RT_NULL;
/* disable interrupt */
level = rt_hw_interrupt_disable();
data_node->prev = uart->dma_tx->list_tail;
if (uart->dma_tx->list_tail != RT_NULL)
uart->dma_tx->list_tail->next = data_node;
uart->dma_tx->list_tail = data_node;
if (uart->dma_tx->list_head == RT_NULL)
{
/* start DMA to transmit data */
uart->dma_tx->list_head = data_node;
/* Enable DMA Channel */
rt_serial_enable_dma(uart->dma_tx->dma_channel,
(rt_uint32_t)uart->dma_tx->list_head->data_ptr,
uart->dma_tx->list_head->data_size);
}
/* enable interrupt */
rt_hw_interrupt_enable(level);
}
}
else
{
/* polling mode */
if (dev->flag & RT_DEVICE_FLAG_STREAM)
{
/* stream mode */
while (size)
{
if (*ptr == '\n')
{
while (!(uart->uart_device->SR & USART_FLAG_TXE));
uart->uart_device->DR = '\r';
}
while (!(uart->uart_device->SR & USART_FLAG_TXE));
uart->uart_device->DR = (*ptr & 0x1FF);
++ptr; --size;
}
}
else
{
/* write data directly */
while (size)
{
while (!(uart->uart_device->SR & USART_FLAG_TXE));
uart->uart_device->DR = (*ptr & 0x1FF);
++ptr; --size;
}
}
}
/* set error code */
rt_set_errno(err_code);
return (rt_uint32_t)ptr - (rt_uint32_t)buffer;
}
static rt_err_t rt_serial_control (rt_device_t dev, rt_uint8_t cmd, void *args)
{
struct stm32_serial_device* uart;
RT_ASSERT(dev != RT_NULL);
uart = (struct stm32_serial_device*)dev->user_data;
switch (cmd)
{
case RT_DEVICE_CTRL_SUSPEND:
/* suspend device */
dev->flag |= RT_DEVICE_FLAG_SUSPENDED;
USART_Cmd(uart->uart_device, DISABLE);
break;
case RT_DEVICE_CTRL_RESUME:
/* resume device */
dev->flag &= ~RT_DEVICE_FLAG_SUSPENDED;
USART_Cmd(uart->uart_device, ENABLE);
break;
}
return RT_EOK;
}
/*
* serial register for STM32
* support STM32F103VB and STM32F103ZE
*/
rt_err_t rt_hw_serial_register(rt_device_t device, const char* name, rt_uint32_t flag, struct stm32_serial_device *serial)
{
RT_ASSERT(device != RT_NULL);
if ((flag & RT_DEVICE_FLAG_DMA_RX) ||
(flag & RT_DEVICE_FLAG_INT_TX))
{
RT_ASSERT(0);
}
device->type = RT_Device_Class_Char;
device->rx_indicate = RT_NULL;
device->tx_complete = RT_NULL;
device->init = rt_serial_init;
device->open = rt_serial_open;
device->close = rt_serial_close;
device->read = rt_serial_read;
device->write = rt_serial_write;
device->control = rt_serial_control;
device->user_data = serial;
/* register a character device */
return rt_device_register(device, name, RT_DEVICE_FLAG_RDWR | flag);
}
/* ISR for serial interrupt */
void rt_hw_serial_isr(rt_device_t device)
{
struct stm32_serial_device* uart = (struct stm32_serial_device*) device->user_data;
if(USART_GetITStatus(uart->uart_device, USART_IT_RXNE) != RESET)
{
/* interrupt mode receive */
RT_ASSERT(device->flag & RT_DEVICE_FLAG_INT_RX);
/* save on rx buffer */
while (uart->uart_device->SR & USART_FLAG_RXNE)
{
rt_base_t level;
/* disable interrupt */
level = rt_hw_interrupt_disable();
/* save character */
uart->int_rx->rx_buffer[uart->int_rx->save_index] = uart->uart_device->DR & 0xff;
uart->int_rx->save_index ++;
if (uart->int_rx->save_index >= UART_RX_BUFFER_SIZE)
uart->int_rx->save_index = 0;
/* if the next position is read index, discard this 'read char' */
if (uart->int_rx->save_index == uart->int_rx->read_index)
{
uart->int_rx->read_index ++;
if (uart->int_rx->read_index >= UART_RX_BUFFER_SIZE)
uart->int_rx->read_index = 0;
}
/* enable interrupt */
rt_hw_interrupt_enable(level);
}
/* clear interrupt */
USART_ClearITPendingBit(uart->uart_device, USART_IT_RXNE);
/* invoke callback */
if (device->rx_indicate != RT_NULL)
{
rt_size_t rx_length;
/* get rx length */
rx_length = uart->int_rx->read_index > uart->int_rx->save_index ?
UART_RX_BUFFER_SIZE - uart->int_rx->read_index + uart->int_rx->save_index :
uart->int_rx->save_index - uart->int_rx->read_index;
device->rx_indicate(device, rx_length);
}
}
if (USART_GetITStatus(uart->uart_device, USART_IT_TC) != RESET)
{
/* clear interrupt */
USART_ClearITPendingBit(uart->uart_device, USART_IT_TC);
}
}
/*
* ISR for DMA mode Tx
*/
void rt_hw_serial_dma_tx_isr(rt_device_t device)
{
rt_uint32_t level;
struct stm32_serial_data_node* data_node;
struct stm32_serial_device* uart = (struct stm32_serial_device*) device->user_data;
/* DMA mode receive */
RT_ASSERT(device->flag & RT_DEVICE_FLAG_DMA_TX);
/* get the first data node */
data_node = uart->dma_tx->list_head;
RT_ASSERT(data_node != RT_NULL);
/* invoke call to notify tx complete */
if (device->tx_complete != RT_NULL)
device->tx_complete(device, data_node->data_ptr);
/* disable interrupt */
level = rt_hw_interrupt_disable();
/* remove list head */
uart->dma_tx->list_head = data_node->next;
if (uart->dma_tx->list_head == RT_NULL) /* data link empty */
uart->dma_tx->list_tail = RT_NULL;
/* enable interrupt */
rt_hw_interrupt_enable(level);
/* release data node memory */
rt_mp_free(data_node);
if (uart->dma_tx->list_head != RT_NULL)
{
/* transmit next data node */
rt_serial_enable_dma(uart->dma_tx->dma_channel,
(rt_uint32_t)uart->dma_tx->list_head->data_ptr,
uart->dma_tx->list_head->data_size);
}
else
{
/* no data to be transmitted, disable DMA */
DMA_Cmd(uart->dma_tx->dma_channel, DISABLE);
}
}
/*@}*/
bsp/stm32f20x/serial.h 已删除 100644 → 0
浏览文件 @ bfad5e60
/*
* File : serial.h
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2009 - 2010, RT-Thread Development Team
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rt-thread.org/license/LICENSE
*
* Change Logs:
* Date Author Notes
* 2009-01-05 Bernard first version
* 2010-03-29 Bernard remove interrupt tx and DMA rx mode.
*/
#ifndef __RT_HW_SERIAL_H__
#define __RT_HW_SERIAL_H__
#include <rthw.h>
#include <rtthread.h>
/* STM32F10x library definitions */
#include <stm32f2xx.h>
#define UART_RX_BUFFER_SIZE 64
#define UART_TX_DMA_NODE_SIZE 4
/* data node for Tx Mode */
struct stm32_serial_data_node
{
rt_uint8_t *data_ptr;
rt_size_t data_size;
struct stm32_serial_data_node *next, *prev;
};
struct stm32_serial_dma_tx
{
/* DMA Channel */
DMA_Stream_TypeDef* dma_channel;
/* data list head and tail */
struct stm32_serial_data_node *list_head, *list_tail;
/* data node memory pool */
struct rt_mempool data_node_mp;
rt_uint8_t data_node_mem_pool[UART_TX_DMA_NODE_SIZE *
(sizeof(struct stm32_serial_data_node) + sizeof(void*))];
};
struct stm32_serial_int_rx
{
rt_uint8_t rx_buffer[UART_RX_BUFFER_SIZE];
rt_uint32_t read_index, save_index;
};
struct stm32_serial_device
{
USART_TypeDef* uart_device;
/* rx structure */
struct stm32_serial_int_rx* int_rx;
/* tx structure */
struct stm32_serial_dma_tx* dma_tx;
};
rt_err_t rt_hw_serial_register(rt_device_t device, const char* name, rt_uint32_t flag, struct stm32_serial_device *serial);
void rt_hw_serial_isr(rt_device_t device);
void rt_hw_serial_dma_tx_isr(rt_device_t device);
#endif
bsp/stm32f20x/startup.c 已删除 100644 → 0
浏览文件 @ bfad5e60
/*
* File : startup.c
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2006, RT-Thread Develop Team
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://openlab.rt-thread.com/license/LICENSE
*
* Change Logs:
* Date Author Notes
* 2006-08-31 Bernard first implementation
*/
#include <rthw.h>
#include <rtthread.h>
#include <stm32f2xx.h>
#include "board.h"
/**
* @addtogroup STM32
*/
/*@{*/
extern int rt_application_init(void);
#ifdef RT_USING_FINSH
extern void finsh_system_init(void);
extern void finsh_set_device(const char* device);
#endif
#ifdef __CC_ARM
extern int Image$$RW_IRAM1$$ZI$$Limit;
#elif __ICCARM__
#pragma section="HEAP"
#else
extern int __bss_end;
#endif
#ifdef DEBUG
/*******************************************************************************
* Function Name : assert_failed
* Description : Reports the name of the source file and the source line number
* where the assert error has occurred.
* Input : - file: pointer to the source file name
* - line: assert error line source number
* Output : None
* Return : None
*******************************************************************************/
void assert_failed(u8* file, u32 line)
{
rt_kprintf("\n\r Wrong parameter value detected on\r\n");
rt_kprintf(" file %s\r\n", file);
rt_kprintf(" line %d\r\n", line);
while (1) ;
}
#endif
/**
* This function will startup RT-Thread RTOS.
*/
void rtthread_startup(void)
{
/* init board */
rt_hw_board_init();
/* show version */
rt_show_version();
/* init tick */
rt_system_tick_init();
/* init kernel object */
rt_system_object_init();
/* init timer system */
rt_system_timer_init();
#ifdef RT_USING_HEAP
#if STM32_EXT_SRAM
rt_system_heap_init((void*)STM32_EXT_SRAM_BEGIN, (void*)STM32_EXT_SRAM_END);
#else
#ifdef __CC_ARM
rt_system_heap_init((void*)&Image$$RW_IRAM1$$ZI$$Limit, (void*)STM32_SRAM_END);
#elif __ICCARM__
rt_system_heap_init(__segment_end("HEAP"), (void*)STM32_SRAM_END);
#else
/* init memory system */
rt_system_heap_init((void*)&__bss_end, (void*)STM32_SRAM_END);
#endif
#endif
#endif
/* init scheduler system */
rt_system_scheduler_init();
#ifdef RT_USING_DFS
/* init sdcard driver */
#if STM32_USE_SDIO
rt_hw_sdcard_init();
#else
rt_hw_msd_init();
#endif
#endif
rt_hw_rtc_init();
/* init all device */
rt_device_init_all();
/* init application */
rt_application_init();
#ifdef RT_USING_FINSH
/* init finsh */
finsh_system_init();
finsh_set_device("uart1");
#endif
/* init timer thread */
rt_system_timer_thread_init();
/* init idle thread */
rt_thread_idle_init();
/* start scheduler */
rt_system_scheduler_start();
/* never reach here */
return ;
}
int main(void)
{
/* disable interrupt first */
rt_hw_interrupt_disable();
/* init system setting */
SystemInit();
/* startup RT-Thread RTOS */
rtthread_startup();
return 0;
}
/*@}*/
bsp/stm32f20x/stm32f20x_it.c 已删除 100644 → 0
浏览文件 @ bfad5e60
/**
******************************************************************************
* @file Project/Template/stm32f10x_it.c
* @author MCD Application Team
* @version V3.1.0
* @date 06/19/2009
* @brief Main Interrupt Service Routines.
* This file provides template for all exceptions handler and
* peripherals interrupt service routine.
******************************************************************************
* @copy
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2009 STMicroelectronics</center></h2>
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f20x_it.h"
#include <rtthread.h>
/** @addtogroup Template_Project
* @{
*/
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/******************************************************************************/
/* Cortex-M3 Processor Exceptions Handlers */
/******************************************************************************/
/**
* @brief This function handles NMI exception.
* @param None
* @retval None
*/
void NMI_Handler(void)
{
}
/**
* @brief This function handles Memory Manage exception.
* @param None
* @retval None
*/
void MemManage_Handler(void)
{
/* Go to infinite loop when Memory Manage exception occurs */
while (1)
{
}
}
/**
* @brief This function handles Bus Fault exception.
* @param None
* @retval None
*/
void BusFault_Handler(void)
{
/* Go to infinite loop when Bus Fault exception occurs */
while (1)
{
}
}
/**
* @brief This function handles Usage Fault exception.
* @param None
* @retval None
*/
void UsageFault_Handler(void)
{
/* Go to infinite loop when Usage Fault exception occurs */
while (1)
{
}
}
/**
* @brief This function handles SVCall exception.
* @param None
* @retval None
*/
void SVC_Handler(void)
{
}
/**
* @brief This function handles Debug Monitor exception.
* @param None
* @retval None
*/
void DebugMon_Handler(void)
{
}
#if defined(RT_USING_DFS) && STM32_USE_SDIO
/*******************************************************************************
* Function Name : SDIO_IRQHandler
* Description : This function handles SDIO global interrupt request.
* Input : None
* Output : None
* Return : None
*******************************************************************************/
void SDIO_IRQHandler(void)
{
extern int SD_ProcessIRQSrc(void);
/* enter interrupt */
rt_interrupt_enter();
/* Process All SDIO Interrupt Sources */
if( SD_ProcessIRQSrc() == 2)
rt_kprintf("SD Error\n");
/* leave interrupt */
rt_interrupt_leave();
}
#endif
/**
* @}
*/
/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/
bsp/stm32f20x/stm32f20x_it.h 已删除 100644 → 0
浏览文件 @ bfad5e60
/**
******************************************************************************
* @file Project/Template/stm32f10x_it.h
* @author MCD Application Team
* @version V3.1.0
* @date 06/19/2009
* @brief This file contains the headers of the interrupt handlers.
******************************************************************************
* @copy
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2009 STMicroelectronics</center></h2>
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F10x_IT_H
#define __STM32F10x_IT_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include <stm32f2xx.h>
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions ------------------------------------------------------- */
void NMI_Handler(void);
void HardFault_Handler(void);
void MemManage_Handler(void);
void BusFault_Handler(void);
void UsageFault_Handler(void);
void SVC_Handler(void);
void DebugMon_Handler(void);
void PendSV_Handler(void);
void SysTick_Handler(void);
#ifdef __cplusplus
}
#endif
#endif /* __STM32F10x_IT_H */
/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/
bsp/stm32f20x/stm32f2xx_conf.h 已删除 100644 → 0
浏览文件 @ bfad5e60
/**
******************************************************************************
* @file USART/USART_Printf/stm32f2xx_conf.h
* @author MCD Application Team
* @version V1.0.0
* @date 18-April-2011
* @brief Library configuration file.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F2xx_CONF_H
#define __STM32F2xx_CONF_H
/* Includes ------------------------------------------------------------------*/
/* Uncomment the line below to enable peripheral header file inclusion */
#include "stm32f2xx_adc.h"
#include "stm32f2xx_can.h"
#include "stm32f2xx_crc.h"
#include "stm32f2xx_cryp.h"
#include "stm32f2xx_dac.h"
#include "stm32f2xx_dbgmcu.h"
#include "stm32f2xx_dcmi.h"
#include "stm32f2xx_dma.h"
#include "stm32f2xx_exti.h"
#include "stm32f2xx_flash.h"
#include "stm32f2xx_fsmc.h"
#include "stm32f2xx_hash.h"
#include "stm32f2xx_gpio.h"
#include "stm32f2xx_i2c.h"
#include "stm32f2xx_iwdg.h"
#include "stm32f2xx_pwr.h"
#include "stm32f2xx_rcc.h"
#include "stm32f2xx_rng.h"
#include "stm32f2xx_rtc.h"
#include "stm32f2xx_sdio.h"
#include "stm32f2xx_spi.h"
#include "stm32f2xx_syscfg.h"
#include "stm32f2xx_tim.h"
#include "stm32f2xx_usart.h"
#include "stm32f2xx_wwdg.h"
#include "misc.h" /* High level functions for NVIC and SysTick (add-on to CMSIS functions) */
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/* If an external clock source is used, then the value of the following define
should be set to the value of the external clock source, else, if no external
clock is used, keep this define commented */
/*#define I2S_EXTERNAL_CLOCK_VAL 12288000 */ /* Value of the external clock in Hz */
/* Uncomment the line below to expanse the "assert_param" macro in the
Standard Peripheral Library drivers code */
/* #define USE_FULL_ASSERT 1 */
/* Exported macro ------------------------------------------------------------*/
#ifdef USE_FULL_ASSERT
/**
* @brief The assert_param macro is used for function's parameters check.
* @param expr: If expr is false, it calls assert_failed function
* which reports the name of the source file and the source
* line number of the call that failed.
* If expr is true, it returns no value.
* @retval None
*/
#define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
/* Exported functions ------------------------------------------------------- */
void assert_failed(uint8_t* file, uint32_t line);
#else
#define assert_param(expr) ((void)0)
#endif /* USE_FULL_ASSERT */
#endif /* __STM32F2xx_CONF_H */
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f20x/usart.c 已删除 100644 → 0
浏览文件 @ bfad5e60
此差异已折叠。
bsp/stm32f20x/usart.h 已删除 100644 → 0
浏览文件 @ bfad5e60
/*
* File : usart.h
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2009, RT-Thread Development Team
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rt-thread.org/license/LICENSE
*
* Change Logs:
* Date Author Notes
* 2009-01-05 Bernard the first version
*/
#ifndef __USART_H__
#define __USART_H__
#include <rthw.h>
#include <rtthread.h>
void rt_hw_usart_init(void);
#endif
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或