Skip to content

R
rt-thread

人间散章 / rt-thread
与 Fork 源项目一致

Fork自 RT-Thread / rt-thread

通知 1
Star 1
Fork 0
R
rt-thread

体验新版 GitCode，发现更多精彩内容 >>

提交 c4118f58 编写于 作者: S SummerGift
浏览文件
操作

Merge remote-tracking branch 'remotes/gitlab/master' into add_stm32_new_framework

上级 cf7292d4 bf62a7ff
展开全部 隐藏空白更改
内联 并排
Showing with 2348 addition and 820 deletion
bsp/CME_M7/rtconfig.h
浏览文件 @ c4118f58
......@@ -55,6 +55,7 @@
#define RT_USING_DEVICE
#define RT_USING_DEVICE_IPC
#define RT_USING_SERIAL
#define RT_SERIAL_USING_DMA
/* SECTION: Console options */
#define RT_USING_CONSOLE
......
bsp/allwinner_tina/.config
浏览文件 @ c4118f58
......@@ -120,6 +120,7 @@ CONFIG_RT_USING_DFS_DEVFS=y
#
CONFIG_RT_USING_DEVICE_IPC=y
CONFIG_RT_USING_SERIAL=y
CONFIG_RT_SERIAL_USING_DMA=y
# CONFIG_RT_USING_CAN is not set
# CONFIG_RT_USING_HWTIMER is not set
# CONFIG_RT_USING_CPUTIME is not set
......
bsp/allwinner_tina/rtconfig.h
浏览文件 @ c4118f58
......@@ -111,6 +111,7 @@
#define RT_USING_DEVICE_IPC
#define RT_USING_SERIAL
#define RT_SERIAL_USING_DMA
/* RT_USING_CAN is not set */
/* RT_USING_HWTIMER is not set */
/* RT_USING_CPUTIME is not set */
......
bsp/amebaz/.config
浏览文件 @ c4118f58
......@@ -106,6 +106,7 @@ CONFIG_FINSH_ARG_MAX=10
CONFIG_RT_USING_DEVICE_IPC=y
CONFIG_RT_PIPE_BUFSZ=512
CONFIG_RT_USING_SERIAL=y
CONFIG_RT_SERIAL_USING_DMA=y
# CONFIG_RT_USING_CAN is not set
# CONFIG_RT_USING_HWTIMER is not set
# CONFIG_RT_USING_CPUTIME is not set
......
bsp/amebaz/rtconfig.h
浏览文件 @ c4118f58
......@@ -75,6 +75,7 @@
#define RT_USING_DEVICE_IPC
#define RT_PIPE_BUFSZ 512
#define RT_USING_SERIAL
#define RT_SERIAL_USING_DMA
/* Using WiFi */
......
bsp/apollo2/rtconfig.h
浏览文件 @ c4118f58
......@@ -99,6 +99,7 @@
#define RT_USING_DEVICE_IPC
#define RT_USING_SERIAL
#define RT_SERIAL_USING_DMA
/* RT_USING_CAN is not set */
/* RT_USING_HWTIMER is not set */
#define RT_USING_I2C
......
bsp/asm9260t/.config
浏览文件 @ c4118f58
......@@ -83,6 +83,7 @@ CONFIG_FINSH_CMD_SIZE=80
#
CONFIG_RT_USING_DEVICE_IPC=y
CONFIG_RT_USING_SERIAL=y
CONFIG_RT_SERIAL_USING_DMA=y
# CONFIG_RT_USING_CAN is not set
# CONFIG_RT_USING_HWTIMER is not set
# CONFIG_RT_USING_I2C is not set
......
bsp/asm9260t/rtconfig.h
浏览文件 @ c4118f58
......@@ -75,6 +75,7 @@
#define RT_USING_DEVICE_IPC
#define RT_USING_SERIAL
#define RT_SERIAL_USING_DMA
/* RT_USING_CAN is not set */
/* RT_USING_HWTIMER is not set */
/* RT_USING_I2C is not set */
......
bsp/at91sam9260/rtconfig.h
浏览文件 @ c4118f58
......@@ -76,6 +76,7 @@
#define RT_USING_DEVICE_IPC
#define RT_USING_SERIAL
#define RT_SERIAL_USING_DMA
/* SECTION: Console options */
#define RT_USING_CONSOLE
......
bsp/beaglebone/.config
浏览文件 @ c4118f58
......@@ -115,6 +115,7 @@ CONFIG_RT_USING_DFS_DEVFS=y
CONFIG_RT_USING_DEVICE_IPC=y
CONFIG_RT_PIPE_BUFSZ=512
CONFIG_RT_USING_SERIAL=y
CONFIG_RT_SERIAL_USING_DMA=y
# CONFIG_RT_USING_CAN is not set
# CONFIG_RT_USING_HWTIMER is not set
# CONFIG_RT_USING_CPUTIME is not set
......
bsp/beaglebone/rtconfig.h
浏览文件 @ c4118f58
......@@ -77,6 +77,7 @@
#define RT_USING_DEVICE_IPC
#define RT_PIPE_BUFSZ 512
#define RT_USING_SERIAL
#define RT_SERIAL_USING_DMA
#define RT_USING_PIN
/* Using USB */
......
bsp/ck802/.config
浏览文件 @ c4118f58
......@@ -97,6 +97,7 @@ CONFIG_FINSH_ARG_MAX=10
#
CONFIG_RT_USING_DEVICE_IPC=y
CONFIG_RT_USING_SERIAL=y
CONFIG_RT_SERIAL_USING_DMA=y
# CONFIG_RT_USING_CAN is not set
# CONFIG_RT_USING_HWTIMER is not set
# CONFIG_RT_USING_CPUTIME is not set
......
bsp/ck802/rtconfig.h
浏览文件 @ c4118f58
......@@ -71,6 +71,7 @@
#define RT_USING_DEVICE_IPC
#define RT_USING_SERIAL
#define RT_SERIAL_USING_DMA
#define RT_USING_PIN
/* Using USB */
......
bsp/dm365/.config
浏览文件 @ c4118f58
......@@ -134,6 +134,7 @@ CONFIG_RT_NFS_HOST_EXPORT="192.168.1.5:/"
CONFIG_RT_USING_DEVICE_IPC=y
CONFIG_RT_PIPE_BUFSZ=512
CONFIG_RT_USING_SERIAL=y
CONFIG_RT_SERIAL_USING_DMA=y
# CONFIG_RT_USING_CAN is not set
# CONFIG_RT_USING_HWTIMER is not set
# CONFIG_RT_USING_CPUTIME is not set
......
bsp/dm365/rtconfig.h
浏览文件 @ c4118f58
......@@ -125,6 +125,7 @@
#define RT_USING_DEVICE_IPC
#define RT_PIPE_BUFSZ 512
#define RT_USING_SERIAL
#define RT_SERIAL_USING_DMA
/* RT_USING_CAN is not set */
/* RT_USING_HWTIMER is not set */
/* RT_USING_CPUTIME is not set */
......
bsp/fh8620/rtconfig.h
浏览文件 @ c4118f58
......@@ -74,6 +74,7 @@
#define RT_USING_DEVICE_IPC
// <bool name="RT_USING_SERIAL" description="Using Serial Device Driver Framework" default="true" />
#define RT_USING_SERIAL
#define RT_SERIAL_USING_DMA
// <integer name="RT_UART_RX_BUFFER_SIZE" description="The buffer size for UART reception" default="64" />
#define RT_UART_RX_BUFFER_SIZE 64
// </section>
......
bsp/frdm-k64f/rtconfig.h
浏览文件 @ c4118f58
......@@ -63,6 +63,7 @@
#define RT_USING_DEVICE_IPC
/* Using Serial Device Driver Framework" default="true" */
#define RT_USING_SERIAL
#define RT_SERIAL_USING_DMA
// <section name="RT_USING_COMPONENTS_INIT" description="Using components init" default="false" >
#define RT_USING_COMPONENTS_INIT
......
bsp/gd32303e-eval/.config
浏览文件 @ c4118f58
......@@ -120,6 +120,7 @@ CONFIG_RT_USING_DFS_DEVFS=y
#
CONFIG_RT_USING_DEVICE_IPC=y
CONFIG_RT_USING_SERIAL=y
CONFIG_RT_SERIAL_USING_DMA=y
# CONFIG_RT_USING_CAN is not set
# CONFIG_RT_USING_HWTIMER is not set
# CONFIG_RT_USING_CPUTIME is not set
......
bsp/gd32303e-eval/rtconfig.h
浏览文件 @ c4118f58
......@@ -87,6 +87,7 @@
#define RT_USING_DEVICE_IPC
#define RT_USING_SERIAL
#define RT_SERIAL_USING_DMA
#define RT_USING_I2C
#define RT_USING_PIN
#define RT_USING_SPI
......
bsp/gd32450z-eval/.config
浏览文件 @ c4118f58
......@@ -131,6 +131,7 @@ CONFIG_RT_USING_DFS_DEVFS=y
CONFIG_RT_USING_DEVICE_IPC=y
CONFIG_RT_PIPE_BUFSZ=512
CONFIG_RT_USING_SERIAL=y
CONFIG_RT_SERIAL_USING_DMA=y
# CONFIG_RT_USING_CAN is not set
# CONFIG_RT_USING_HWTIMER is not set
# CONFIG_RT_USING_CPUTIME is not set
......
bsp/gd32450z-eval/rtconfig.h
浏览文件 @ c4118f58
......@@ -88,6 +88,7 @@
#define RT_USING_DEVICE_IPC
#define RT_PIPE_BUFSZ 512
#define RT_USING_SERIAL
#define RT_SERIAL_USING_DMA
#define RT_USING_PIN
/* Using USB */
......
bsp/gkipc/.config
浏览文件 @ c4118f58
......@@ -123,6 +123,7 @@ CONFIG_RT_NFS_HOST_EXPORT="192.168.10.82:/"
#
CONFIG_RT_USING_DEVICE_IPC=y
CONFIG_RT_USING_SERIAL=y
CONFIG_RT_SERIAL_USING_DMA=y
# CONFIG_RT_USING_CAN is not set
# CONFIG_RT_USING_HWTIMER is not set
# CONFIG_RT_USING_CPUTIME is not set
......
bsp/gkipc/rtconfig.h
浏览文件 @ c4118f58
......@@ -114,6 +114,7 @@
#define RT_USING_DEVICE_IPC
#define RT_USING_SERIAL
#define RT_SERIAL_USING_DMA
/* RT_USING_CAN is not set */
/* RT_USING_HWTIMER is not set */
/* RT_USING_CPUTIME is not set */
......
bsp/hifive1/.config
浏览文件 @ c4118f58
......@@ -107,6 +107,7 @@ CONFIG_FINSH_ARG_MAX=10
CONFIG_RT_USING_DEVICE_IPC=y
CONFIG_RT_PIPE_BUFSZ=512
CONFIG_RT_USING_SERIAL=y
CONFIG_RT_SERIAL_USING_DMA=y
# CONFIG_RT_USING_CAN is not set
# CONFIG_RT_USING_HWTIMER is not set
# CONFIG_RT_USING_CPUTIME is not set
......
bsp/hifive1/rtconfig.h
浏览文件 @ c4118f58
......@@ -74,6 +74,7 @@
#define RT_USING_DEVICE_IPC
#define RT_PIPE_BUFSZ 512
#define RT_USING_SERIAL
#define RT_SERIAL_USING_DMA
/* Using WiFi */
......
bsp/imx6sx/cortex-a9/.config
浏览文件 @ c4118f58
......@@ -116,6 +116,7 @@ CONFIG_RT_USING_DFS_DEVFS=y
CONFIG_RT_USING_DEVICE_IPC=y
CONFIG_RT_PIPE_BUFSZ=512
CONFIG_RT_USING_SERIAL=y
CONFIG_RT_SERIAL_USING_DMA=y
# CONFIG_RT_USING_CAN is not set
# CONFIG_RT_USING_HWTIMER is not set
# CONFIG_RT_USING_CPUTIME is not set
......
bsp/imx6sx/cortex-a9/rtconfig.h
浏览文件 @ c4118f58
......@@ -77,6 +77,7 @@
#define RT_USING_DEVICE_IPC
#define RT_PIPE_BUFSZ 512
#define RT_USING_SERIAL
#define RT_SERIAL_USING_DMA
#define RT_USING_PIN
/* Using USB */
......
bsp/imx6ul/rtconfig.h
浏览文件 @ c4118f58
......@@ -72,6 +72,7 @@
#define RT_USING_DEVICE_IPC
// <bool name="RT_USING_SERIAL" description="Using Serial Device Driver Framework" default="true" />
#define RT_USING_SERIAL
#define RT_SERIAL_USING_DMA
// <integer name="RT_UART_RX_BUFFER_SIZE" description="The buffer size for UART reception" default="64" />
#define RT_UART_RX_BUFFER_SIZE 64
// <bool name="RT_USING_INTERRUPT_INFO" description="Using interrupt information description" default="true" />
......
bsp/imxrt/imxrt1050-ArchMix/.config
浏览文件 @ c4118f58
......@@ -135,6 +135,7 @@ CONFIG_RT_USING_DFS_DEVFS=y
CONFIG_RT_USING_DEVICE_IPC=y
CONFIG_RT_PIPE_BUFSZ=512
CONFIG_RT_USING_SERIAL=y
CONFIG_RT_SERIAL_USING_DMA=y
# CONFIG_RT_USING_CAN is not set
# CONFIG_RT_USING_HWTIMER is not set
CONFIG_RT_USING_CPUTIME=y
......
bsp/imxrt/imxrt1050-ArchMix/rtconfig.h
浏览文件 @ c4118f58
......@@ -95,6 +95,7 @@
#define RT_USING_DEVICE_IPC
#define RT_PIPE_BUFSZ 512
#define RT_USING_SERIAL
#define RT_SERIAL_USING_DMA
#define RT_USING_CPUTIME
#define RT_USING_CPUTIME_CORTEXM
#define RT_USING_I2C
......
bsp/imxrt/imxrt1050-evk/.config
浏览文件 @ c4118f58
......@@ -136,6 +136,7 @@ CONFIG_RT_USING_DFS_DEVFS=y
CONFIG_RT_USING_DEVICE_IPC=y
CONFIG_RT_PIPE_BUFSZ=512
CONFIG_RT_USING_SERIAL=y
CONFIG_RT_SERIAL_USING_DMA=y
# CONFIG_RT_USING_CAN is not set
# CONFIG_RT_USING_HWTIMER is not set
CONFIG_RT_USING_CPUTIME=y
......
bsp/imxrt/imxrt1050-evk/rtconfig.h
浏览文件 @ c4118f58
......@@ -95,6 +95,7 @@
#define RT_USING_DEVICE_IPC
#define RT_PIPE_BUFSZ 512
#define RT_USING_SERIAL
#define RT_SERIAL_USING_DMA
#define RT_USING_CPUTIME
#define RT_USING_CPUTIME_CORTEXM
#define RT_USING_I2C
......
bsp/imxrt1052-evk/.config
浏览文件 @ c4118f58
......@@ -124,6 +124,7 @@ CONFIG_RT_USING_DFS_DEVFS=y
#
CONFIG_RT_USING_DEVICE_IPC=y
CONFIG_RT_USING_SERIAL=y
CONFIG_RT_SERIAL_USING_DMA=y
# CONFIG_RT_USING_CAN is not set
# CONFIG_RT_USING_HWTIMER is not set
# CONFIG_RT_USING_CPUTIME is not set
......
bsp/imxrt1052-evk/rtconfig.h
浏览文件 @ c4118f58
......@@ -91,6 +91,7 @@
#define RT_USING_DEVICE_IPC
#define RT_USING_SERIAL
#define RT_SERIAL_USING_DMA
#define RT_USING_I2C
#define RT_USING_I2C_BITOPS
#define RT_USING_PIN
......
bsp/k210/.config 0 → 100644
浏览文件 @ c4118f58
#
# Automatically generated file; DO NOT EDIT.
# RT-Thread Project Configuration
#
#
# RT-Thread Kernel
#
CONFIG_RT_NAME_MAX=8
# CONFIG_RT_USING_SMP is not set
CONFIG_RT_ALIGN_SIZE=8
# CONFIG_RT_THREAD_PRIORITY_8 is not set
CONFIG_RT_THREAD_PRIORITY_32=y
# CONFIG_RT_THREAD_PRIORITY_256 is not set
CONFIG_RT_THREAD_PRIORITY_MAX=32
CONFIG_RT_TICK_PER_SECOND=100
CONFIG_RT_USING_OVERFLOW_CHECK=y
CONFIG_RT_USING_HOOK=y
CONFIG_RT_USING_IDLE_HOOK=y
CONFIG_RT_IDEL_HOOK_LIST_SIZE=4
CONFIG_IDLE_THREAD_STACK_SIZE=1024
# CONFIG_RT_USING_TIMER_SOFT is not set
CONFIG_RT_DEBUG=y
CONFIG_RT_DEBUG_INIT_CONFIG=y
CONFIG_RT_DEBUG_INIT=1
# CONFIG_RT_DEBUG_THREAD_CONFIG is not set
# CONFIG_RT_DEBUG_SCHEDULER_CONFIG is not set
# CONFIG_RT_DEBUG_IPC_CONFIG is not set
# CONFIG_RT_DEBUG_TIMER_CONFIG is not set
# CONFIG_RT_DEBUG_IRQ_CONFIG is not set
# CONFIG_RT_DEBUG_MEM_CONFIG is not set
# CONFIG_RT_DEBUG_SLAB_CONFIG is not set
# CONFIG_RT_DEBUG_MEMHEAP_CONFIG is not set
# CONFIG_RT_DEBUG_MODULE_CONFIG is not set
#
# Inter-Thread communication
#
CONFIG_RT_USING_SEMAPHORE=y
CONFIG_RT_USING_MUTEX=y
CONFIG_RT_USING_EVENT=y
CONFIG_RT_USING_MAILBOX=y
CONFIG_RT_USING_MESSAGEQUEUE=y
# CONFIG_RT_USING_SIGNALS is not set
#
# Memory Management
#
CONFIG_RT_USING_MEMPOOL=y
# CONFIG_RT_USING_MEMHEAP is not set
# CONFIG_RT_USING_NOHEAP is not set
CONFIG_RT_USING_SMALL_MEM=y
# CONFIG_RT_USING_SLAB is not set
# CONFIG_RT_USING_MEMTRACE is not set
CONFIG_RT_USING_HEAP=y
#
# Kernel Device Object
#
CONFIG_RT_USING_DEVICE=y
# CONFIG_RT_USING_DEVICE_OPS is not set
# CONFIG_RT_USING_INTERRUPT_INFO is not set
CONFIG_RT_USING_CONSOLE=y
CONFIG_RT_CONSOLEBUF_SIZE=128
CONFIG_RT_CONSOLE_DEVICE_NAME="uarths"
CONFIG_RT_VER_NUM=0x40000
CONFIG_ARCH_CPU_64BIT=y
CONFIG_ARCH_RISCV=y
CONFIG_ARCH_RISCV64=y
# CONFIG_ARCH_CPU_STACK_GROWS_UPWARD is not set
#
# RT-Thread Components
#
CONFIG_RT_USING_COMPONENTS_INIT=y
CONFIG_RT_USING_USER_MAIN=y
CONFIG_RT_MAIN_THREAD_STACK_SIZE=8192
CONFIG_RT_MAIN_THREAD_PRIORITY=10
#
# C++ features
#
# CONFIG_RT_USING_CPLUSPLUS is not set
#
# Command shell
#
CONFIG_RT_USING_FINSH=y
CONFIG_FINSH_THREAD_NAME="tshell"
CONFIG_FINSH_USING_HISTORY=y
CONFIG_FINSH_HISTORY_LINES=5
CONFIG_FINSH_USING_SYMTAB=y
CONFIG_FINSH_USING_DESCRIPTION=y
# CONFIG_FINSH_ECHO_DISABLE_DEFAULT is not set
CONFIG_FINSH_THREAD_PRIORITY=20
CONFIG_FINSH_THREAD_STACK_SIZE=4096
CONFIG_FINSH_CMD_SIZE=80
# CONFIG_FINSH_USING_AUTH is not set
CONFIG_FINSH_USING_MSH=y
CONFIG_FINSH_USING_MSH_DEFAULT=y
CONFIG_FINSH_USING_MSH_ONLY=y
CONFIG_FINSH_ARG_MAX=10
#
# Device virtual file system
#
CONFIG_RT_USING_DFS=y
CONFIG_DFS_USING_WORKDIR=y
CONFIG_DFS_FILESYSTEMS_MAX=4
CONFIG_DFS_FILESYSTEM_TYPES_MAX=4
CONFIG_DFS_FD_MAX=16
# CONFIG_RT_USING_DFS_MNTTABLE is not set
# CONFIG_RT_USING_DFS_ELMFAT is not set
CONFIG_RT_USING_DFS_DEVFS=y
# CONFIG_RT_USING_DFS_ROMFS is not set
# CONFIG_RT_USING_DFS_RAMFS is not set
# CONFIG_RT_USING_DFS_UFFS is not set
# CONFIG_RT_USING_DFS_JFFS2 is not set
#
# Device Drivers
#
CONFIG_RT_USING_DEVICE_IPC=y
CONFIG_RT_PIPE_BUFSZ=512
CONFIG_RT_USING_SERIAL=y
CONFIG_RT_SERIAL_USING_DMA=y
# CONFIG_RT_USING_CAN is not set
# CONFIG_RT_USING_HWTIMER is not set
# CONFIG_RT_USING_CPUTIME is not set
# CONFIG_RT_USING_I2C is not set
CONFIG_RT_USING_PIN=y
# CONFIG_RT_USING_ADC is not set
# CONFIG_RT_USING_PWM is not set
# CONFIG_RT_USING_MTD_NOR is not set
# CONFIG_RT_USING_MTD_NAND is not set
# CONFIG_RT_USING_MTD is not set
# CONFIG_RT_USING_PM is not set
# CONFIG_RT_USING_RTC is not set
# CONFIG_RT_USING_SDIO is not set
# CONFIG_RT_USING_SPI is not set
# CONFIG_RT_USING_WDT is not set
# CONFIG_RT_USING_AUDIO is not set
#
# Using WiFi
#
# CONFIG_RT_USING_WIFI is not set
#
# Using USB
#
# CONFIG_RT_USING_USB_HOST is not set
# CONFIG_RT_USING_USB_DEVICE is not set
#
# POSIX layer and C standard library
#
CONFIG_RT_USING_LIBC=y
# CONFIG_RT_USING_PTHREADS is not set
CONFIG_RT_USING_POSIX=y
# CONFIG_RT_USING_POSIX_MMAP is not set
# CONFIG_RT_USING_POSIX_TERMIOS is not set
# CONFIG_RT_USING_POSIX_AIO is not set
# CONFIG_RT_USING_MODULE is not set
#
# Network
#
#
# Socket abstraction layer
#
# CONFIG_RT_USING_SAL is not set
#
# light weight TCP/IP stack
#
# CONFIG_RT_USING_LWIP is not set
#
# Modbus master and slave stack
#
# CONFIG_RT_USING_MODBUS is not set
#
# AT commands
#
# CONFIG_RT_USING_AT is not set
#
# VBUS(Virtual Software BUS)
#
# CONFIG_RT_USING_VBUS is not set
#
# Utilities
#
# CONFIG_RT_USING_LOGTRACE is not set
# CONFIG_RT_USING_RYM is not set
# CONFIG_RT_USING_ULOG is not set
# CONFIG_RT_USING_UTEST is not set
#
# RT-Thread online packages
#
#
# IoT - internet of things
#
# CONFIG_PKG_USING_PAHOMQTT is not set
# CONFIG_PKG_USING_WEBCLIENT is not set
# CONFIG_PKG_USING_WEBNET is not set
# CONFIG_PKG_USING_MONGOOSE is not set
# CONFIG_PKG_USING_WEBTERMINAL is not set
# CONFIG_PKG_USING_CJSON is not set
# CONFIG_PKG_USING_JSMN is not set
# CONFIG_PKG_USING_LJSON is not set
# CONFIG_PKG_USING_EZXML is not set
# CONFIG_PKG_USING_NANOPB is not set
#
# Wi-Fi
#
#
# Marvell WiFi
#
# CONFIG_PKG_USING_WLANMARVELL is not set
#
# Wiced WiFi
#
# CONFIG_PKG_USING_WLAN_WICED is not set
# CONFIG_PKG_USING_COAP is not set
# CONFIG_PKG_USING_NOPOLL is not set
# CONFIG_PKG_USING_NETUTILS is not set
# CONFIG_PKG_USING_AT_DEVICE is not set
# CONFIG_PKG_USING_WIZNET is not set
#
# IoT Cloud
#
# CONFIG_PKG_USING_ONENET is not set
# CONFIG_PKG_USING_GAGENT_CLOUD is not set
# CONFIG_PKG_USING_ALI_IOTKIT is not set
# CONFIG_PKG_USING_AZURE is not set
# CONFIG_PKG_USING_TENCENT_IOTKIT is not set
#
# security packages
#
# CONFIG_PKG_USING_MBEDTLS is not set
# CONFIG_PKG_USING_libsodium is not set
# CONFIG_PKG_USING_TINYCRYPT is not set
#
# language packages
#
# CONFIG_PKG_USING_LUA is not set
# CONFIG_PKG_USING_JERRYSCRIPT is not set
# CONFIG_PKG_USING_MICROPYTHON is not set
#
# multimedia packages
#
# CONFIG_PKG_USING_OPENMV is not set
# CONFIG_PKG_USING_MUPDF is not set
#
# tools packages
#
# CONFIG_PKG_USING_CMBACKTRACE is not set
# CONFIG_PKG_USING_EASYFLASH is not set
# CONFIG_PKG_USING_EASYLOGGER is not set
# CONFIG_PKG_USING_SYSTEMVIEW is not set
# CONFIG_PKG_USING_RDB is not set
# CONFIG_PKG_USING_QRCODE is not set
# CONFIG_PKG_USING_ULOG_EASYFLASH is not set
#
# system packages
#
# CONFIG_PKG_USING_GUIENGINE is not set
# CONFIG_PKG_USING_CAIRO is not set
# CONFIG_PKG_USING_PIXMAN is not set
# CONFIG_PKG_USING_LWEXT4 is not set
# CONFIG_PKG_USING_PARTITION is not set
# CONFIG_PKG_USING_FAL is not set
# CONFIG_PKG_USING_SQLITE is not set
# CONFIG_PKG_USING_RTI is not set
# CONFIG_PKG_USING_LITTLEVGL2RTT is not set
# CONFIG_PKG_USING_CMSIS is not set
# CONFIG_PKG_USING_DFS_YAFFS is not set
# CONFIG_PKG_USING_LITTLEFS is not set
#
# peripheral libraries and drivers
#
# CONFIG_PKG_USING_REALTEK_AMEBA is not set
# CONFIG_PKG_USING_SHT2X is not set
# CONFIG_PKG_USING_AHT10 is not set
# CONFIG_PKG_USING_AP3216C is not set
# CONFIG_PKG_USING_STM32_SDIO is not set
# CONFIG_PKG_USING_ICM20608 is not set
# CONFIG_PKG_USING_U8G2 is not set
# CONFIG_PKG_USING_BUTTON is not set
# CONFIG_PKG_USING_MPU6XXX is not set
# CONFIG_PKG_USING_PCF8574 is not set
CONFIG_PKG_USING_KENDRYTE_SDK=y
CONFIG_PKG_KENDRYTE_SDK_PATH="/packages/peripherals/kendryte-sdk"
CONFIG_PKG_USING_KENDRYTE_SDK_V052=y
# CONFIG_PKG_USING_KENDRYTE_SDK_LATEST_VERSION is not set
CONFIG_PKG_KENDRYTE_SDK_VER="v0.5.2"
#
# miscellaneous packages
#
# CONFIG_PKG_USING_LIBCSV is not set
# CONFIG_PKG_USING_OPTPARSE is not set
# CONFIG_PKG_USING_FASTLZ is not set
# CONFIG_PKG_USING_MINILZO is not set
# CONFIG_PKG_USING_QUICKLZ is not set
# CONFIG_PKG_USING_MULTIBUTTON is not set
# CONFIG_PKG_USING_CANFESTIVAL is not set
# CONFIG_PKG_USING_ZLIB is not set
# CONFIG_PKG_USING_DSTR is not set
# CONFIG_PKG_USING_TINYFRAME is not set
#
# sample package
#
#
# samples: kernel and components samples
#
# CONFIG_PKG_USING_KERNEL_SAMPLES is not set
# CONFIG_PKG_USING_FILESYSTEM_SAMPLES is not set
# CONFIG_PKG_USING_NETWORK_SAMPLES is not set
# CONFIG_PKG_USING_PERIPHERAL_SAMPLES is not set
#
# example package: hello
#
# CONFIG_PKG_USING_HELLO is not set
#
# Privated Packages of RealThread
#
# CONFIG_PKG_USING_CODEC is not set
# CONFIG_PKG_USING_PLAYER is not set
# CONFIG_PKG_USING_PERSIMMON_SRC is not set
# CONFIG_PKG_USING_JS_PERSIMMON is not set
# CONFIG_PKG_USING_JERRYSCRIPT_WIN32 is not set
#
# Network Utilities
#
# CONFIG_PKG_USING_WICED is not set
# CONFIG_PKG_USING_CLOUDSDK is not set
# CONFIG_PKG_USING_COREMARK is not set
# CONFIG_PKG_USING_POWER_MANAGER is not set
# CONFIG_PKG_USING_RT_OTA is not set
# CONFIG_PKG_USING_RDBD_SRC is not set
# CONFIG_PKG_USING_RTINSIGHT is not set
# CONFIG_PKG_USING_SMARTCONFIG is not set
# CONFIG_PKG_USING_RTX is not set
CONFIG_BOARD_K210_EVB=y
CONFIG_BSP_USING_UART_HS=y
# CONFIG_BSP_USING_UART1 is not set
# CONFIG_BSP_USING_UART2 is not set
# CONFIG_BSP_USING_UART3 is not set
# CONFIG_BSP_USING_I2C1 is not set
# CONFIG_BSP_USING_SPI1 is not set
CONFIG___STACKSIZE__=4096
bsp/k210/Kconfig 0 → 100644
浏览文件 @ c4118f58
mainmenu "RT-Thread Project Configuration"
config $BSP_DIR
string
option env="BSP_ROOT"
default "."
config $RTT_DIR
string
option env="RTT_ROOT"
default: "../.."
config $PKGS_DIR
string
option env="PKGS_ROOT"
default "packages"
source "$RTT_DIR/Kconfig"
source "$PKGS_DIR/Kconfig"
config BOARD_K210_EVB
bool
select ARCH_RISCV64
select PKG_USING_KENDRYTE_SDK
default y
source "driver/Kconfig"
config __STACKSIZE__
int "stack size for interrupt"
default 4096
bsp/k210/README.md 0 → 100644
浏览文件 @ c4118f58
# Kendryte K210板级支持包说明
## 1. 简介
Kendryte K210 是集成机器视觉与机器听觉能力的系统级芯片(SoC)。使用台积电 (TSMC) 超低功耗的 28 纳米先进制程，具有双核64位处理器，拥有较好的功耗性能，稳定性与可靠性。该方案力求零门槛开发，可在最短时效部署于用户的产品中，赋予产品人工智能。
Kendryte K210 定位于AI与IoT市场的SoC，同时是使用非常方便的MCU。
Kendryte中文含义为勘智，而勘智取自勘物探智。这颗芯片主要应用领域为物联网领域，在物联网领域进行开发，因此为勘物；这颗芯片主要提供的是人工智能解决方案，在人工智能领域探索，因此为探智。
* 具备机器视觉能力
* 具备机器听觉能力
* 更好的低功耗视觉处理速度与准确率
* 具备卷积人工神经网络硬件加速器KPU，可高性能进行卷积人工神经网络运算
* TSMC 28nm先进制程，温度范围-40°C到125°C，稳定可靠
* 支持固件加密，难以使用普通方法破解
* 独特的可编程IO阵列，使产品设计更加灵活
* 低电压，与相同处理能力的系统相比具有更低功耗
* 3.3V/1.8V双电压支持，无需电平转换，节约成本
芯片规格包括如下：
| 硬件 | 描述 |
| -- | -- |
|芯片型号| K210 |
|CPU| 双核RV64GC |
|主频| 400MHz |
|片内SRAM| 8MB |
| 外设 | 内嵌AES与SHA256算法加速器 |
| | DVP、JTAG、OTP、FPIOA、GPIO、UART、SPI、RTC、I²S、I²C、WDT、Timer与PWM |
## 2. 编译说明
编译K210，需要先下载K210 BSP以及RT-Thread代码：
git clone https://github.com/BernardXiong/K210.git
cd K210
git submodule init
git submodule update
git clone https://github.com/RT-Thread/rt-thread.git
cd rt-thread
git checkout -b dev-4.0.x origin/dev-4.0.x
注意，因为RT-Thread整体代码太庞大，所以并未把RT-Thread git repo以一个submodule方式加入到K210 BSP git repo中，
而是需要把RT-Thread代码克隆到K210目录下，并切换到dev-4.0.x分支。
编译推荐使用[env工具][1]，可以在console下进入到`K210`目录中，运行以下命令：
set RTT_EXEC_PATH=your_toolchains
scons
来编译这个板级支持包。如果编译正确无误，会产生rtthread.elf、rtthread.bin文件。其中rtthread.bin需要烧写到设备中进行运行。
## 3. 烧写及执行
连接好串口，然后使用[K-Flash](https://kendryte.com/downloads/)工具进行烧写bin文件。
![K-Flash](images/flash.png)
### 3.1 运行结果
如果编译 & 烧写无误，当复位设备后，会在串口上看到RT-Thread的启动logo信息：
![terminal](images/k210.png)
## 4. 驱动支持情况及计划
| 驱动 | 支持情况 | 备注 |
| ------ | ---- | :------: |
| UART | 支持 | 高速UART，用于shell |
## 5. 联系人信息
维护人：[bernard](https://github.com/BernardXiong)
## 6. 注意事项
在进行系统menuconfig配置时，以下项是必选的
| 配置项 | 强制配置值 |
| ----- | --------- |
| Alignment size for CPU architecture data access | 8 |
| The stack size of idle thread | > 1024 |
| the device name for console | "uarths" |
| Set main thread stack size | 4096 |
## 7. 参考
* 芯片[datasheet][2]
[1]: https://www.rt-thread.org/page/download.html
[2]: https://s3.cn-north-1.amazonaws.com.cn/dl.kendryte.com/documents/kendryte_datasheet_20180919020633.pdf
bsp/k210/SConscript 0 → 100644
浏览文件 @ c4118f58
# for module compiling
import os
from building import *
cwd = GetCurrentDir()
objs = []
list = os.listdir(cwd)
for d in list:
path = os.path.join(cwd, d)
if os.path.isfile(os.path.join(path, 'SConscript')):
objs = objs + SConscript(os.path.join(d, 'SConscript'))
Return('objs')
bsp/k210/SConstruct 0 → 100644
浏览文件 @ c4118f58
import os
import sys
import rtconfig
from rtconfig import RTT_ROOT
sys.path = sys.path + [os.path.join(RTT_ROOT, 'tools')]
from building import *
TARGET = 'rtthread.' + rtconfig.TARGET_EXT
env = Environment(tools = ['mingw'],
AS = rtconfig.AS, ASFLAGS = rtconfig.AFLAGS,
CC = rtconfig.CC, CCFLAGS = rtconfig.CFLAGS,
CXX = rtconfig.CXX, CXXFLAGS = rtconfig.CXXFLAGS,
AR = rtconfig.AR, ARFLAGS = '-rc',
LINK = rtconfig.LINK, LINKFLAGS = rtconfig.LFLAGS)
env.PrependENVPath('PATH', rtconfig.EXEC_PATH)
env['ASCOM'] = env['ASPPCOM']
Export('RTT_ROOT')
Export('rtconfig')
# prepare building environment
objs = PrepareBuilding(env, RTT_ROOT, has_libcpu = False)
stack_size = 4096
stack_lds = open('link_stacksize.lds', 'w')
if GetDepend('__STACKSIZE__'): stack_size = GetDepend('__STACKSIZE__')
stack_lds.write('__STACKSIZE__ = %d;' % stack_size)
stack_lds.close()
# make a building
DoBuilding(TARGET, objs)
bsp/k210/applications/SConscript 0 → 100644
浏览文件 @ c4118f58
from building import *
cwd = GetCurrentDir()
src = Glob('*.c') + Glob('*.cpp')
CPPPATH = [cwd]
group = DefineGroup('Applications', src, depend = [''], CPPPATH = CPPPATH)
Return('group')
bsp/k210/applications/main.c 0 → 100644
浏览文件 @ c4118f58
/*
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2018/09/30 Bernard The first version
*/
#include <rtthread.h>
#include <stdio.h>
int main(void)
{
rt_kprintf("Hello, world\n");
return 0;
}
bsp/k210/applications/mnt.c 0 → 100644
浏览文件 @ c4118f58
/*
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
*/
#include <rtthread.h>
int mnt_init(void)
{
return 0;
}
bsp/k210/driver/Kconfig 0 → 100644
浏览文件 @ c4118f58
config BSP_USING_UART_HS
bool "Enable High Speed UART"
default y
config BSP_USING_UART1
bool "Enable UART1 (GPIO0/1)"
default n
config BSP_USING_UART2
bool "Enable UART2 (GPIO0/1)"
default n
config BSP_USING_UART3
bool "Enable UART3 (GPIO0/1)"
default n
config BSP_USING_I2C1
bool "Enable I2C1 (GPIO0/1)"
select RT_USING_I2C
default n
config BSP_USING_SPI1
bool "Enable SPI1 (GPIO0/1)"
select RT_USING_SPI
default n
bsp/k210/driver/SConscript 0 → 100644
浏览文件 @ c4118f58
# RT-Thread building script for component
from building import *
cwd = GetCurrentDir()
src = Split('''
board.c
drv_uart.c
''')
CPPPATH = [cwd]
if GetDepend('RT_USING_PIN'):
src += ['drv_gpio.c']
if GetDepend('RT_USING_HWTIMER'):
src += ['drv_hw_timer.c']
if GetDepend('RT_USING_CPUTIME'):
src += ['drv_cputime.c']
if GetDepend('RT_USING_I2C'):
src += ['drv_i2c.c']
if GetDepend('RT_USING_SPI'):
src += ['drv_spi.c']
if GetDepend('RT_USING_PWM'):
src += ['drv_pwm.c']
if GetDepend('RT_USING_RTC'):
src += ['drv_rtc.c']
if GetDepend('RT_USING_WDT'):
src += ['drv_wdt.c']
group = DefineGroup('Drivers', src, depend = [''], CPPPATH = CPPPATH)
Return('group')
bsp/k210/driver/board.c 0 → 100644
浏览文件 @ c4118f58
/*
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
*/
#include <rthw.h>
#include <rtthread.h>
#include "board.h"
#include "tick.h"
#include "drv_uart.h"
#include "encoding.h"
#include "fpioa.h"
#include "dmac.h"
#include "uarths.h"
void rt_hw_console_output(const char *str)
{
uarths_puts(str);
return ;
}
void init_bss(void)
{
unsigned int *dst;
dst = &__bss_start;
while (dst < &__bss_end)
{
*dst++ = 0;
}
}
void cpu_entry(int cpuid)
{
extern void entry(void);
/* disable global interrupt */
rt_hw_interrupt_disable();
if (cpuid == 0)
{
init_bss();
entry();
}
else
{
while (1) ;
}
}
#include <clint.h>
#include <sysctl.h>
int freq(void)
{
rt_uint64_t value = 0;
value = sysctl_clock_get_freq(SYSCTL_CLOCK_PLL0);
rt_kprintf("PLL0: %d\n", value);
value = sysctl_clock_get_freq(SYSCTL_CLOCK_PLL1);
rt_kprintf("PLL1: %d\n", value);
value = sysctl_clock_get_freq(SYSCTL_CLOCK_PLL2);
rt_kprintf("PLL2: %d\n", value);
value = sysctl_clock_get_freq(SYSCTL_CLOCK_CPU);
rt_kprintf("CPU : %d\n", value);
value = sysctl_clock_get_freq(SYSCTL_CLOCK_APB0);
rt_kprintf("APB0: %d\n", value);
value = sysctl_clock_get_freq(SYSCTL_CLOCK_APB1);
rt_kprintf("APB1: %d\n", value);
value = sysctl_clock_get_freq(SYSCTL_CLOCK_APB2);
rt_kprintf("APB2: %d\n", value);
value = sysctl_clock_get_freq(SYSCTL_CLOCK_HCLK);
rt_kprintf("HCLK: %d\n", value);
value = clint_get_time();
rt_kprintf("mtime: %d\n", value);
return 0;
}
MSH_CMD_EXPORT(freq, show freq info);
void rt_hw_board_init(void)
{
/* Init FPIOA */
fpioa_init();
/* Dmac init */
dmac_init();
/* initalize interrupt */
rt_hw_interrupt_init();
/* initialize hardware interrupt */
rt_hw_uart_init();
rt_hw_tick_init();
#ifdef RT_USING_CONSOLE
/* set console device */
rt_console_set_device(RT_CONSOLE_DEVICE_NAME);
#endif /* RT_USING_CONSOLE */
#ifdef RT_USING_HEAP
rt_kprintf("heap: [0x%08x - 0x%08x]\n", (rt_ubase_t) RT_HW_HEAP_BEGIN, (rt_ubase_t) RT_HW_HEAP_END);
/* initialize memory system */
rt_system_heap_init(RT_HW_HEAP_BEGIN, RT_HW_HEAP_END);
#endif
#ifdef RT_USING_COMPONENTS_INIT
rt_components_board_init();
#endif
}
bsp/k210/driver/board.h 0 → 100644
浏览文件 @ c4118f58
/*
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2017-5-30 Bernard the first version
*/
#ifndef BOARD_H__
#define BOARD_H__
extern unsigned int __bss_start;
extern unsigned int __bss_end;
#define RT_HW_HEAP_BEGIN (void*)&__bss_end
#define RT_HW_HEAP_END (void*)(0x80000000 + 6 * 1024 * 1024)
void rt_hw_board_init(void);
#endif
bsp/k210/driver/drv_uart.c 0 → 100644
浏览文件 @ c4118f58
/*
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
*/
#include <rthw.h>
#include <rtthread.h>
#include <rtdevice.h>
#include "board.h"
#include "drv_uart.h"
#include <stdio.h>
// #include "uart.h"
#include "uarths.h"
#include "plic.h"
struct device_uart
{
rt_uint32_t hw_base;
rt_uint32_t irqno;
};
static rt_err_t uart_configure(struct rt_serial_device *serial, struct serial_configure *cfg);
static rt_err_t uart_control(struct rt_serial_device *serial, int cmd, void *arg);
static int drv_uart_putc(struct rt_serial_device *serial, char c);
static int drv_uart_getc(struct rt_serial_device *serial);
static void uart_irq_handler(int irqno, void *param);
const struct rt_uart_ops _uart_ops =
{
uart_configure,
uart_control,
drv_uart_putc,
drv_uart_getc,
RT_NULL
};
/*
* UART Initiation
*/
int rt_hw_uart_init(void)
{
struct rt_serial_device *serial;
struct device_uart *uart;
struct serial_configure config = RT_SERIAL_CONFIG_DEFAULT;
#ifdef BSP_USING_UART_HS
{
static struct rt_serial_device serial_hs;
static struct device_uart uart_hs;
serial = &serial_hs;
uart = &uart_hs;
serial->ops = &_uart_ops;
serial->config = config;
serial->config.baud_rate = 115200;
uart->hw_base = UARTHS_BASE_ADDR;
uart->irqno = IRQN_UARTHS_INTERRUPT;
/* initialize UART HS */
uarths_init();
rt_hw_serial_register(serial,
"uarths",
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
uart);
}
#endif
#ifdef BSP_USING_UART1
{
static struct rt_serial_device serial1;
static struct device_uart uart1;
serial = &serial1;
uart = &uart1;
serial->ops = &_uart_ops;
serial->config = config;
serial->config.baud_rate = 115200;
uart->hw_base = UART1_BASE_ADDR;
uart->irqno = IRQN_UART1_INTERRUPT;
rt_hw_serial_register(serial,
"uarths",
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
uart);
}
#endif
#ifdef BSP_USING_UART2
#endif
#ifdef BSP_USING_UART3
#endif
return 0;
}
/*
* UART interface
*/
static rt_err_t uart_configure(struct rt_serial_device *serial, struct serial_configure *cfg)
{
rt_uint32_t baud_div;
struct device_uart *uart;
RT_ASSERT(serial != RT_NULL);
serial->config = *cfg;
uart = serial->parent.user_data;
RT_ASSERT(uart != RT_NULL);
/* Init UART Hardware */
/* Enable UART clock */
/* Set both receiver and transmitter in UART mode (not SIR) */
/* Set databits, stopbits and parity. (8-bit data, 1 stopbit, no parity) */
/* set baudrate */
return (RT_EOK);
}
static rt_err_t uart_control(struct rt_serial_device *serial, int cmd, void *arg)
{
struct device_uart *uart;
uart = serial->parent.user_data;
RT_ASSERT(uart != RT_NULL);
switch (cmd)
{
case RT_DEVICE_CTRL_CLR_INT:
/* Disable the UART Interrupt */
rt_hw_interrupt_mask(uart->irqno);
break;
case RT_DEVICE_CTRL_SET_INT:
/* install interrupt */
rt_hw_interrupt_install(uart->irqno, uart_irq_handler,
serial, serial->parent.parent.name);
rt_hw_interrupt_umask(uart->irqno);
break;
}
return (RT_EOK);
}
static int drv_uart_putc(struct rt_serial_device *serial, char c)
{
struct device_uart *uart;
uart = serial->parent.user_data;
if (uart->hw_base == UARTHS_BASE_ADDR)
{
uarths_putchar(c);
}
else
{
/* other uart */
}
return (1);
}
static int drv_uart_getc(struct rt_serial_device *serial)
{
int ret = -1;
struct device_uart *uart = serial->parent.user_data;
if (uart->hw_base == UARTHS_BASE_ADDR)
{
ret = uarths_getc();
if (ret != EOF) return ret;
}
/* Receive Data Available */
return (-1);
}
/* UART ISR */
static void uart_irq_handler(int irqno, void *param)
{
rt_ubase_t isr;
struct rt_serial_device *serial = (struct rt_serial_device *)param;
struct device_uart *uart = serial->parent.user_data;
/* read interrupt status and clear it */
if (uart->hw_base == UARTHS_BASE_ADDR)
{
if (uarths->ip.rxwm)
rt_hw_serial_isr(serial, RT_SERIAL_EVENT_RX_IND);
}
}
bsp/k210/driver/drv_uart.h 0 → 100644
浏览文件 @ c4118f58
/*
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2018/10/01 Bernard The first version
*/
#ifndef __DRV_UART_H__
#define __DRV_UART_H__
int rt_hw_uart_init(void);
#endif /* __DRV_UART_H__ */
bsp/k210/link.lds 0 → 100644
浏览文件 @ c4118f58
/*
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
*/
INCLUDE "link_stacksize.lds"
/*
* The OUTPUT_ARCH command specifies the machine architecture where the
* argument is one of the names used in the Kendryte library.
*/
OUTPUT_ARCH( "riscv" )
MEMORY
{
/* 6M SRAM */
SRAM : ORIGIN = 0x80000000, LENGTH = 0x600000
}
ENTRY(_start)
SECTIONS
{
. = 0x80000000 ;
/* __STACKSIZE__ = 4096; */
.start :
{
*(.start);
} > SRAM
. = ALIGN(4);
.text :
{
*(.text) /* remaining code */
*(.text.*) /* remaining code */
*(.rodata) /* read-only data (constants) */
*(.rodata*)
*(.glue_7)
*(.glue_7t)
*(.gnu.linkonce.t*)
/* section information for finsh shell */
. = ALIGN(4);
__fsymtab_start = .;
KEEP(*(FSymTab))
__fsymtab_end = .;
. = ALIGN(4);
__vsymtab_start = .;
KEEP(*(VSymTab))
__vsymtab_end = .;
. = ALIGN(4);
/* section information for initial. */
. = ALIGN(4);
__rt_init_start = .;
KEEP(*(SORT(.rti_fn*)))
__rt_init_end = .;
. = ALIGN(4);
. = ALIGN(4);
_etext = .;
} > SRAM
.eh_frame_hdr :
{
*(.eh_frame_hdr)
*(.eh_frame_entry)
} > SRAM
.eh_frame : ONLY_IF_RO { KEEP (*(.eh_frame)) } > SRAM
. = ALIGN(4);
.data :
{
*(.data)
*(.data.*)
*(.data1)
*(.data1.*)
. = ALIGN(8);
PROVIDE( __global_pointer$ = . + 0x800 );
*(.sdata)
*(.sdata.*)
} > SRAM
/* stack for dual core */
.stack :
{
. = ALIGN(64);
__stack_start__ = .;
. += __STACKSIZE__;
__stack_cpu0 = .;
. += __STACKSIZE__;
__stack_cpu1 = .;
} > SRAM
.sbss :
{
__bss_start = .;
*(.sbss)
*(.sbss.*)
*(.dynsbss)
*(.scommon)
} > SRAM
.bss :
{
*(.bss)
*(.bss.*)
*(.dynbss)
*(COMMON)
__bss_end = .;
} > SRAM
_end = .;
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
/* DWARF debug sections.
* Symbols in the DWARF debugging sections are relative to the beginning
* of the section so we begin them at 0. */
/* DWARF 1 */
.debug 0 : { *(.debug) }
.line 0 : { *(.line) }
/* GNU DWARF 1 extensions */
.debug_srcinfo 0 : { *(.debug_srcinfo) }
.debug_sfnames 0 : { *(.debug_sfnames) }
/* DWARF 1.1 and DWARF 2 */
.debug_aranges 0 : { *(.debug_aranges) }
.debug_pubnames 0 : { *(.debug_pubnames) }
/* DWARF 2 */
.debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_line 0 : { *(.debug_line) }
.debug_frame 0 : { *(.debug_frame) }
.debug_str 0 : { *(.debug_str) }
.debug_loc 0 : { *(.debug_loc) }
.debug_macinfo 0 : { *(.debug_macinfo) }
/* SGI/MIPS DWARF 2 extensions */
.debug_weaknames 0 : { *(.debug_weaknames) }
.debug_funcnames 0 : { *(.debug_funcnames) }
.debug_typenames 0 : { *(.debug_typenames) }
.debug_varnames 0 : { *(.debug_varnames) }
}
bsp/k210/link_stacksize.lds 0 → 100644
浏览文件 @ c4118f58
__STACKSIZE__ = 4096;
\ No newline at end of file
bsp/k210/rtconfig.h 0 → 100644
浏览文件 @ c4118f58
#ifndef RT_CONFIG_H__
#define RT_CONFIG_H__
/* Automatically generated file; DO NOT EDIT. */
/* RT-Thread Project Configuration */
/* RT-Thread Kernel */
#define RT_NAME_MAX 8
#define RT_ALIGN_SIZE 8
#define RT_THREAD_PRIORITY_32
#define RT_THREAD_PRIORITY_MAX 32
#define RT_TICK_PER_SECOND 100
#define RT_USING_OVERFLOW_CHECK
#define RT_USING_HOOK
#define RT_USING_IDLE_HOOK
#define RT_IDEL_HOOK_LIST_SIZE 4
#define IDLE_THREAD_STACK_SIZE 1024
#define RT_DEBUG
#define RT_DEBUG_INIT_CONFIG
#define RT_DEBUG_INIT 1
/* Inter-Thread communication */
#define RT_USING_SEMAPHORE
#define RT_USING_MUTEX
#define RT_USING_EVENT
#define RT_USING_MAILBOX
#define RT_USING_MESSAGEQUEUE
/* Memory Management */
#define RT_USING_MEMPOOL
#define RT_USING_SMALL_MEM
#define RT_USING_HEAP
/* Kernel Device Object */
#define RT_USING_DEVICE
#define RT_USING_CONSOLE
#define RT_CONSOLEBUF_SIZE 128
#define RT_CONSOLE_DEVICE_NAME "uarths"
#define RT_VER_NUM 0x40000
#define ARCH_CPU_64BIT
#define ARCH_RISCV
#define ARCH_RISCV64
/* RT-Thread Components */
#define RT_USING_COMPONENTS_INIT
#define RT_USING_USER_MAIN
#define RT_MAIN_THREAD_STACK_SIZE 8192
#define RT_MAIN_THREAD_PRIORITY 10
/* C++ features */
/* Command shell */
#define RT_USING_FINSH
#define FINSH_THREAD_NAME "tshell"
#define FINSH_USING_HISTORY
#define FINSH_HISTORY_LINES 5
#define FINSH_USING_SYMTAB
#define FINSH_USING_DESCRIPTION
#define FINSH_THREAD_PRIORITY 20
#define FINSH_THREAD_STACK_SIZE 4096
#define FINSH_CMD_SIZE 80
#define FINSH_USING_MSH
#define FINSH_USING_MSH_DEFAULT
#define FINSH_USING_MSH_ONLY
#define FINSH_ARG_MAX 10
/* Device virtual file system */
#define RT_USING_DFS
#define DFS_USING_WORKDIR
#define DFS_FILESYSTEMS_MAX 4
#define DFS_FILESYSTEM_TYPES_MAX 4
#define DFS_FD_MAX 16
#define RT_USING_DFS_DEVFS
/* Device Drivers */
#define RT_USING_DEVICE_IPC
#define RT_PIPE_BUFSZ 512
#define RT_USING_SERIAL
#define RT_SERIAL_USING_DMA
#define RT_USING_PIN
/* Using WiFi */
/* Using USB */
/* POSIX layer and C standard library */
#define RT_USING_LIBC
#define RT_USING_POSIX
/* Network */
/* Socket abstraction layer */
/* light weight TCP/IP stack */
/* Modbus master and slave stack */
/* AT commands */
/* VBUS(Virtual Software BUS) */
/* Utilities */
/* RT-Thread online packages */
/* IoT - internet of things */
/* Wi-Fi */
/* Marvell WiFi */
/* Wiced WiFi */
/* IoT Cloud */
/* security packages */
/* language packages */
/* multimedia packages */
/* tools packages */
/* system packages */
/* peripheral libraries and drivers */
#define PKG_USING_KENDRYTE_SDK
#define PKG_USING_KENDRYTE_SDK_V052
/* miscellaneous packages */
/* sample package */
/* samples: kernel and components samples */
/* example package: hello */
/* Privated Packages of RealThread */
/* Network Utilities */
#define BOARD_K210_EVB
#define BSP_USING_UART_HS
#define __STACKSIZE__ 4096
#endif
bsp/k210/rtconfig.py 0 → 100644
浏览文件 @ c4118f58
import os
# toolchains options
ARCH ='risc-v'
CPU ='k210'
CROSS_TOOL ='gcc'
if os.getenv('RTT_ROOT'):
RTT_ROOT = os.getenv('RTT_ROOT')
else:
RTT_ROOT = r'rt-thread'
if os.getenv('RTT_CC'):
CROSS_TOOL = os.getenv('RTT_CC')
if CROSS_TOOL == 'gcc':
PLATFORM = 'gcc'
EXEC_PATH = r'/opt/riscv64-unknown-elf-gcc-2018.07.0-x86_64-linux-ubuntu14/bin'
else:
print('Please make sure your toolchains is GNU GCC!')
exit(0)
if os.getenv('RTT_EXEC_PATH'):
EXEC_PATH = os.getenv('RTT_EXEC_PATH')
BUILD = 'release'
if PLATFORM == 'gcc':
# toolchains
PREFIX = 'riscv-none-embed-'
# PREFIX = 'riscv64-unknown-elf-'
CC = PREFIX + 'gcc'
CXX = PREFIX + 'g++'
AS = PREFIX + 'gcc'
AR = PREFIX + 'ar'
LINK = PREFIX + 'gcc'
TARGET_EXT = 'elf'
SIZE = PREFIX + 'size'
OBJDUMP = PREFIX + 'objdump'
OBJCPY = PREFIX + 'objcopy'
DEVICE = ' -mcmodel=medany'
CFLAGS = DEVICE + ' -fno-common -ffunction-sections -fdata-sections -fstrict-volatile-bitfields '
AFLAGS = ' -c' + DEVICE + ' -x assembler-with-cpp'
LFLAGS = DEVICE + ' -nostartfiles -Wl,--gc-sections,-Map=rtthread.map,-cref,-u,_start -T link.lds'
CPATH = ''
LPATH = ''
if BUILD == 'debug':
CFLAGS += ' -O0 -ggdb'
AFLAGS += ' -ggdb'
else:
CFLAGS += ' -O2'
CXXFLAGS = CFLAGS
DUMP_ACTION = OBJDUMP + ' -D -S $TARGET > rtt.asm\n'
POST_ACTION = OBJCPY + ' -O binary $TARGET rtthread.bin\n' + SIZE + ' $TARGET \n'
bsp/lpc408x/.config
浏览文件 @ c4118f58
......@@ -121,6 +121,7 @@ CONFIG_RT_USING_DFS_DEVFS=y
#
CONFIG_RT_USING_DEVICE_IPC=y
CONFIG_RT_USING_SERIAL=y
CONFIG_RT_SERIAL_USING_DMA=y
CONFIG_RT_USING_CAN=y
# CONFIG_RT_USING_HWTIMER is not set
# CONFIG_RT_USING_CPUTIME is not set
......
bsp/lpc408x/rtconfig.h
浏览文件 @ c4118f58
......@@ -112,6 +112,7 @@
#define RT_USING_DEVICE_IPC
#define RT_USING_SERIAL
#define RT_SERIAL_USING_DMA
#define RT_USING_CAN
/* RT_USING_HWTIMER is not set */
/* RT_USING_CPUTIME is not set */
......
bsp/lpc43xx/M0/rtconfig.h
浏览文件 @ c4118f58
......@@ -75,6 +75,7 @@
#define RT_USING_DEVICE_IPC
// <bool name="RT_USING_SERIAL" description="Using Serial Device Driver Framework" default="true" />
#define RT_USING_SERIAL
#define RT_SERIAL_USING_DMA
// <integer name="RT_UART_RX_BUFFER_SIZE" description="The buffer size for UART reception" default="64" />
#define RT_UART_RX_BUFFER_SIZE 256
// <bool name="RT_USING_MTD_NAND" description="Using MTD NAND Framework" default="true" />
......
bsp/lpc43xx/M4/rtconfig.h
浏览文件 @ c4118f58
......@@ -74,6 +74,7 @@
#define RT_USING_DEVICE_IPC
// <bool name="RT_USING_SERIAL" description="Using Serial Device Driver Framework" default="true" />
#define RT_USING_SERIAL
#define RT_SERIAL_USING_DMA
// <integer name="RT_UART_RX_BUFFER_SIZE" description="The buffer size for UART reception" default="64" />
#define RT_UART_RX_BUFFER_SIZE 256
// <bool name="RT_USING_MTD_NAND" description="Using MTD NAND Framework" default="true" />
......
bsp/lpc5410x/rtconfig.h
浏览文件 @ c4118f58
......@@ -68,6 +68,7 @@
#define RT_USING_DEVICE_IPC
// <bool name="RT_USING_SERIAL" description="Using serial driver framework" default="true" />
#define RT_USING_SERIAL
#define RT_SERIAL_USING_DMA
// </section>
// <section name="RT_USING_CONSOLE" description="Using console" default="true" >
......
bsp/lpc54114-lite/.config
浏览文件 @ c4118f58
......@@ -138,6 +138,7 @@ CONFIG_RT_USING_DFS_ROMFS=y
CONFIG_RT_USING_DEVICE_IPC=y
CONFIG_RT_PIPE_BUFSZ=512
CONFIG_RT_USING_SERIAL=y
CONFIG_RT_SERIAL_USING_DMA=y
# CONFIG_RT_USING_CAN is not set
# CONFIG_RT_USING_HWTIMER is not set
# CONFIG_RT_USING_CPUTIME is not set
......
bsp/lpc54114-lite/rtconfig.h
浏览文件 @ c4118f58
......@@ -95,6 +95,7 @@
#define RT_USING_DEVICE_IPC
#define RT_PIPE_BUFSZ 512
#define RT_USING_SERIAL
#define RT_SERIAL_USING_DMA
#define RT_USING_I2C
#define RT_USING_I2C_BITOPS
#define RT_USING_PIN
......
bsp/lpc54608-LPCXpresso/.config
浏览文件 @ c4118f58
......@@ -136,6 +136,7 @@ CONFIG_RT_USING_DFS_DEVFS=y
CONFIG_RT_USING_DEVICE_IPC=y
CONFIG_RT_PIPE_BUFSZ=512
CONFIG_RT_USING_SERIAL=y
CONFIG_RT_SERIAL_USING_DMA=y
# CONFIG_RT_USING_CAN is not set
# CONFIG_RT_USING_HWTIMER is not set
# CONFIG_RT_USING_CPUTIME is not set
......
bsp/lpc54608-LPCXpresso/rtconfig.h
浏览文件 @ c4118f58
......@@ -95,6 +95,7 @@
#define RT_USING_DEVICE_IPC
#define RT_PIPE_BUFSZ 512
#define RT_USING_SERIAL
#define RT_SERIAL_USING_DMA
#define RT_USING_I2C
#define RT_USING_I2C_BITOPS
#define RT_USING_PIN
......
bsp/lpc824/rtconfig.h
浏览文件 @ c4118f58
......@@ -128,6 +128,7 @@
// <c1>Using Serial
// <i>Using Serial
//#define RT_USING_SERIAL
#define RT_SERIAL_USING_DMA
// </c>
// </h>
......
bsp/ls1cdev/.config
浏览文件 @ c4118f58
......@@ -133,6 +133,7 @@ CONFIG_RT_DFS_ELM_REENTRANT=y
CONFIG_RT_USING_DEVICE_IPC=y
CONFIG_RT_PIPE_BUFSZ=512
CONFIG_RT_USING_SERIAL=y
CONFIG_RT_SERIAL_USING_DMA=y
CONFIG_RT_USING_CAN=y
# CONFIG_RT_CAN_USING_HDR is not set
# CONFIG_RT_USING_HWTIMER is not set
......
bsp/ls1cdev/rtconfig.h
浏览文件 @ c4118f58
......@@ -124,6 +124,7 @@
#define RT_USING_DEVICE_IPC
#define RT_PIPE_BUFSZ 512
#define RT_USING_SERIAL
#define RT_SERIAL_USING_DMA
#define RT_USING_CAN
/* RT_CAN_USING_HDR is not set */
/* RT_USING_HWTIMER is not set */
......
bsp/mb9bf506r/rtconfig.h
浏览文件 @ c4118f58
......@@ -68,6 +68,7 @@
#define RT_USING_DEVICE_IPC
// <bool name="RT_USING_SERIAL" description="Using Serial Device Driver Framework" default="true" />
#define RT_USING_SERIAL
#define RT_SERIAL_USING_DMA
// <bool name="RT_USING_UART0_0" description="Using UART0_0" default="true" />
#define RT_USING_UART0_0
// <bool name="RT_USING_UART0_1" description="Using UART0_1" default="false" />
......
bsp/nrf51822/rtconfig.h
浏览文件 @ c4118f58
......@@ -68,6 +68,7 @@
#define RT_USING_DEVICE_IPC
// <bool name="RT_USING_SERIAL" description="Using Serial" default="true" />
//#define RT_USING_SERIAL
#define RT_SERIAL_USING_DMA
/* SECTION: Console options */
#define RT_USING_CONSOLE
......
bsp/nrf52832/rtconfig.h
浏览文件 @ c4118f58
......@@ -70,6 +70,7 @@
#define RT_USING_DEVICE_IPC
// <bool name="RT_USING_SERIAL" description="Using Serial" default="true" />
#define RT_USING_SERIAL
#define RT_SERIAL_USING_DMA
/* SECTION: Console options */
#define RT_USING_CONSOLE
......
bsp/nuvoton_m05x/.config
浏览文件 @ c4118f58
......@@ -104,6 +104,7 @@ CONFIG_FINSH_ARG_MAX=10
CONFIG_RT_USING_DEVICE_IPC=y
CONFIG_RT_PIPE_BUFSZ=512
CONFIG_RT_USING_SERIAL=y
CONFIG_RT_SERIAL_USING_DMA=y
# CONFIG_RT_USING_CAN is not set
# CONFIG_RT_USING_HWTIMER is not set
# CONFIG_RT_USING_CPUTIME is not set
......
bsp/nuvoton_m05x/rtconfig.h
浏览文件 @ c4118f58
......@@ -96,6 +96,7 @@
#define RT_USING_DEVICE_IPC
#define RT_PIPE_BUFSZ 512
#define RT_USING_SERIAL
#define RT_SERIAL_USING_DMA
/* RT_USING_CAN is not set */
/* RT_USING_HWTIMER is not set */
/* RT_USING_CPUTIME is not set */
......
bsp/nuvoton_m451/rtconfig.h
浏览文件 @ c4118f58
......@@ -65,6 +65,7 @@
#define RT_USING_DEVICE_IPC
// <bool name="RT_USING_SERIAL" description="Using Serial" default="true" />
#define RT_USING_SERIAL
#define RT_SERIAL_USING_DMA
/* SECTION: Console options */
#define RT_USING_CONSOLE
......
bsp/nuvoton_m487/.config
浏览文件 @ c4118f58
......@@ -118,6 +118,7 @@ CONFIG_RT_USING_DFS_DEVFS=y
CONFIG_RT_USING_DEVICE_IPC=y
CONFIG_RT_PIPE_BUFSZ=64
CONFIG_RT_USING_SERIAL=y
CONFIG_RT_SERIAL_USING_DMA=y
# CONFIG_RT_USING_CAN is not set
# CONFIG_RT_USING_HWTIMER is not set
# CONFIG_RT_USING_CPUTIME is not set
......
bsp/nuvoton_m487/rtconfig.h
浏览文件 @ c4118f58
......@@ -75,6 +75,7 @@
#define RT_USING_DEVICE_IPC
#define RT_PIPE_BUFSZ 64
#define RT_USING_SERIAL
#define RT_SERIAL_USING_DMA
/* Using WiFi */
......
bsp/nuvoton_nuc472/rtconfig.h
浏览文件 @ c4118f58
......@@ -66,6 +66,7 @@
#define RT_USING_DEVICE_IPC
// <bool name="RT_USING_SERIAL" description="Using Serial" default="true" />
#define RT_USING_SERIAL
#define RT_SERIAL_USING_DMA
/* SECTION: Console options */
#define RT_USING_CONSOLE
......
bsp/nv32f100x/rtconfig.h
浏览文件 @ c4118f58
......@@ -66,6 +66,7 @@
#define RT_USING_DEVICE_IPC
// <bool name="RT_USING_SERIAL" description="Using Serial" default="true" />
#define RT_USING_SERIAL
#define RT_SERIAL_USING_DMA
#define RT_USING_HOOK
#define RT_USING_CPU_USAGE
/* SECTION: Console options */
......
bsp/qemu-vexpress-a9/.config
浏览文件 @ c4118f58
......@@ -143,6 +143,7 @@ CONFIG_RT_USING_DFS_RAMFS=y
CONFIG_RT_USING_DEVICE_IPC=y
CONFIG_RT_PIPE_BUFSZ=512
CONFIG_RT_USING_SERIAL=y
CONFIG_RT_SERIAL_USING_DMA=y
# CONFIG_RT_USING_CAN is not set
# CONFIG_RT_USING_HWTIMER is not set
# CONFIG_RT_USING_CPUTIME is not set
......
bsp/qemu-vexpress-a9/cpu/cpu.c 已删除 100644 → 0
浏览文件 @ cf7292d4
/*
* File : cpu.c
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2006, RT-Thread Develop Team
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rt-thread.org/license/LICENSE
*
* Change Logs:
* Date Author Notes
* 2011-09-15 Bernard first version
* 2018-11-22 Jesven add rt_hw_cpu_id()
*/
#include <rthw.h>
#include <rtthread.h>
#include <board.h>
#ifdef RT_USING_SMP
int rt_hw_cpu_id(void)
{
int cpu_id;
__asm__ volatile (
"mrc p15, 0, %0, c0, c0, 5"
:"=r"(cpu_id)
);
cpu_id &= 0xf;
return cpu_id;
};
#endif
/**
* @addtogroup ARM CPU
*/
/*@{*/
/** shutdown CPU */
void rt_hw_cpu_shutdown()
{
rt_uint32_t level;
rt_kprintf("shutdown...\n");
level = rt_hw_interrupt_disable();
while (level)
{
RT_ASSERT(0);
}
}
/*@}*/
bsp/qemu-vexpress-a9/cpu/cpuport.c 0 → 100644
浏览文件 @ c4118f58
/*
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2011-09-15 Bernard first version
* 2018-11-22 Jesven add rt_hw_cpu_id()
*/
#include <rthw.h>
#include <rtthread.h>
#include <board.h>
#ifdef RT_USING_SMP
int rt_hw_cpu_id(void)
{
int cpu_id;
__asm__ volatile (
"mrc p15, 0, %0, c0, c0, 5"
:"=r"(cpu_id)
);
cpu_id &= 0xf;
return cpu_id;
};
void rt_hw_spin_lock(rt_hw_spinlock_t *lock)
{
unsigned long tmp;
unsigned long newval;
rt_hw_spinlock_t lockval;
__asm__ __volatile__(
"pld [%0]"
::"r"(&lock->slock)
);
__asm__ __volatile__(
"1: ldrex %0, [%3]\n"
" add %1, %0, %4\n"
" strex %2, %1, [%3]\n"
" teq %2, #0\n"
" bne 1b"
: "=&r" (lockval), "=&r" (newval), "=&r" (tmp)
: "r" (&lock->slock), "I" (1 << 16)
: "cc");
while (lockval.tickets.next != lockval.tickets.owner) {
__asm__ __volatile__("wfe":::"memory");
lockval.tickets.owner = *(volatile unsigned short *)(&lock->tickets.owner);
}
__asm__ volatile ("dmb":::"memory");
}
void rt_hw_spin_unlock(rt_hw_spinlock_t *lock)
{
__asm__ volatile ("dmb":::"memory");
lock->tickets.owner++;
__asm__ volatile ("dsb ishst\nsev":::"memory");
}
#endif /*RT_USING_SMP*/
void idle_wfi(void)
{
asm volatile ("wfi");
}
/**
* @addtogroup ARM CPU
*/
/*@{*/
/** shutdown CPU */
void rt_hw_cpu_shutdown()
{
rt_uint32_t level;
rt_kprintf("shutdown...\n");
level = rt_hw_interrupt_disable();
while (level)
{
RT_ASSERT(0);
}
}
/*@}*/
bsp/qemu-vexpress-a9/drivers/board.c
浏览文件 @ c4118f58
......@@ -19,10 +19,8 @@
#define SYS_CTRL __REG32(REALVIEW_SCTL_BASE)
void idle_wfi(void)
{
asm volatile ("wfi");
}
extern void idle_wfi(void);
extern void rt_hw_ipi_handler_install(int ipi_vector, rt_isr_handler_t ipi_isr_handler);
/**
* This function will initialize beaglebone board
......@@ -40,46 +38,8 @@ void rt_hw_board_init(void)
rt_thread_idle_sethook(idle_wfi);
#ifdef RT_USING_SMP
/* install IPI interrupt */
rt_hw_interrupt_install(RT_SCHEDULE_IPI_IRQ, rt_scheduler_ipi_handler, RT_NULL, "ipi");
rt_hw_interrupt_umask(RT_SCHEDULE_IPI_IRQ);
/* install IPI handle */
rt_hw_ipi_handler_install(RT_SCHEDULE_IPI, rt_scheduler_ipi_handler);
#endif
}
#ifdef RT_USING_SMP
void rt_hw_spin_lock(rt_hw_spinlock_t *lock)
{
unsigned long tmp;
unsigned long newval;
rt_hw_spinlock_t lockval;
__asm__ __volatile__(
"pld [%0]"
::"r"(&lock->slock)
);
__asm__ __volatile__(
"1: ldrex %0, [%3]\n"
" add %1, %0, %4\n"
" strex %2, %1, [%3]\n"
" teq %2, #0\n"
" bne 1b"
: "=&r" (lockval), "=&r" (newval), "=&r" (tmp)
: "r" (&lock->slock), "I" (1 << 16)
: "cc");
while (lockval.tickets.next != lockval.tickets.owner) {
__asm__ __volatile__("wfe":::"memory");
lockval.tickets.owner = *(volatile unsigned short *)(&lock->tickets.owner);
}
__asm__ volatile ("dmb":::"memory");
}
void rt_hw_spin_unlock(rt_hw_spinlock_t *lock)
{
__asm__ volatile ("dmb":::"memory");
lock->tickets.owner++;
__asm__ volatile ("dsb ishst\nsev":::"memory");
}
#endif /*RT_USING_SMP*/
bsp/qemu-vexpress-a9/drivers/secondary_cpu.c
浏览文件 @ c4118f58
......@@ -46,10 +46,6 @@ void secondary_cpu_c_start(void)
rt_hw_interrupt_install(IRQ_PBA8_TIMER0_1, rt_hw_timer2_isr, RT_NULL, "tick");
rt_hw_interrupt_umask(IRQ_PBA8_TIMER0_1);
/* install IPI interrupt */
rt_hw_interrupt_install(RT_SCHEDULE_IPI_IRQ, rt_scheduler_ipi_handler, RT_NULL, "ipi");
rt_hw_interrupt_umask(RT_SCHEDULE_IPI_IRQ);
rt_system_scheduler_start();
}
......
bsp/qemu-vexpress-a9/rtconfig.h
浏览文件 @ c4118f58
......@@ -134,6 +134,7 @@
#define RT_USING_DEVICE_IPC
#define RT_PIPE_BUFSZ 512
#define RT_USING_SERIAL
#define RT_SERIAL_USING_DMA
/* RT_USING_CAN is not set */
/* RT_USING_HWTIMER is not set */
/* RT_USING_CPUTIME is not set */
......
bsp/qemu-vexpress-gemini/.config
浏览文件 @ c4118f58
......@@ -118,6 +118,7 @@ CONFIG_RT_USING_DFS_DEVFS=y
CONFIG_RT_USING_DEVICE_IPC=y
CONFIG_RT_PIPE_BUFSZ=512
CONFIG_RT_USING_SERIAL=y
CONFIG_RT_SERIAL_USING_DMA=y
# CONFIG_RT_USING_CAN is not set
# CONFIG_RT_USING_HWTIMER is not set
# CONFIG_RT_USING_CPUTIME is not set
......
bsp/qemu-vexpress-gemini/rtconfig.h
浏览文件 @ c4118f58
......@@ -110,6 +110,7 @@
#define RT_USING_DEVICE_IPC
#define RT_PIPE_BUFSZ 512
#define RT_USING_SERIAL
#define RT_SERIAL_USING_DMA
/* RT_USING_CAN is not set */
/* RT_USING_HWTIMER is not set */
/* RT_USING_CPUTIME is not set */
......
bsp/raspi2/.config
浏览文件 @ c4118f58
......@@ -108,6 +108,7 @@ CONFIG_FINSH_ARG_MAX=10
CONFIG_RT_USING_DEVICE_IPC=y
CONFIG_RT_PIPE_BUFSZ=512
CONFIG_RT_USING_SERIAL=y
CONFIG_RT_SERIAL_USING_DMA=y
# CONFIG_RT_USING_CAN is not set
# CONFIG_RT_USING_HWTIMER is not set
# CONFIG_RT_USING_CPUTIME is not set
......
bsp/raspi2/rtconfig.h
浏览文件 @ c4118f58
......@@ -100,6 +100,7 @@
#define RT_USING_DEVICE_IPC
#define RT_PIPE_BUFSZ 512
#define RT_USING_SERIAL
#define RT_SERIAL_USING_DMA
/* RT_USING_CAN is not set */
/* RT_USING_HWTIMER is not set */
/* RT_USING_CPUTIME is not set */
......
bsp/realview-a8/rtconfig.h
浏览文件 @ c4118f58
......@@ -72,6 +72,7 @@
#define RT_USING_DEVICE_IPC
// <bool name="RT_USING_SERIAL" description="Using Serial Device Driver Framework" default="true" />
#define RT_USING_SERIAL
#define RT_SERIAL_USING_DMA
// <integer name="RT_UART_RX_BUFFER_SIZE" description="The buffer size for UART reception" default="64" />
#define RT_UART_RX_BUFFER_SIZE 64
// <bool name="RT_USING_INTERRUPT_INFO" description="Using interrupt information description" default="true" />
......
bsp/rm48x50/rtconfig.h
浏览文件 @ c4118f58
......@@ -70,6 +70,7 @@
#define RT_USING_DEVICE_IPC
// <bool name="RT_USING_SERIAL" description="Using Serial Device Driver Framework" default="true" />
#define RT_USING_SERIAL
#define RT_SERIAL_USING_DMA
// <integer name="RT_UART_RX_BUFFER_SIZE" description="The buffer size for UART reception" default="64" />
#define RT_UART_RX_BUFFER_SIZE 64
// </section>
......
bsp/rv32m1_vega/ri5cy/.config
浏览文件 @ c4118f58
......@@ -136,6 +136,7 @@ CONFIG_RT_USING_DFS_DEVFS=y
CONFIG_RT_USING_DEVICE_IPC=y
CONFIG_RT_PIPE_BUFSZ=512
CONFIG_RT_USING_SERIAL=y
CONFIG_RT_SERIAL_USING_DMA=y
# CONFIG_RT_USING_CAN is not set
# CONFIG_RT_USING_HWTIMER is not set
# CONFIG_RT_USING_CPUTIME is not set
......
bsp/rx/rtconfig.h
浏览文件 @ c4118f58
......@@ -66,6 +66,7 @@
#define RT_USING_DEVICE_IPC
// <bool name="RT_USING_SERIAL" description="Using Serial" default="true" />
#define RT_USING_SERIAL
#define RT_SERIAL_USING_DMA
/* SECTION: Console options */
#define RT_USING_CONSOLE
......
bsp/samd21/rtconfig.h
浏览文件 @ c4118f58
......@@ -68,6 +68,7 @@
#define RT_USING_DEVICE_IPC
// <bool name="RT_USING_SERIAL" description="Using Serial" default="true" />
#define RT_USING_SERIAL
#define RT_SERIAL_USING_DMA
/* SECTION: Console options */
#define RT_USING_CONSOLE
......
bsp/simulator/.config
浏览文件 @ c4118f58
......@@ -117,6 +117,7 @@ CONFIG_RT_USING_DFS_DEVFS=y
#
CONFIG_RT_USING_DEVICE_IPC=y
CONFIG_RT_USING_SERIAL=y
CONFIG_RT_SERIAL_USING_DMA=y
# CONFIG_RT_USING_CAN is not set
# CONFIG_RT_USING_HWTIMER is not set
# CONFIG_RT_USING_CPUTIME is not set
......
bsp/simulator/rtconfig.h
浏览文件 @ c4118f58
......@@ -108,6 +108,7 @@
#define RT_USING_DEVICE_IPC
#define RT_USING_SERIAL
#define RT_SERIAL_USING_DMA
/* RT_USING_CAN is not set */
/* RT_USING_HWTIMER is not set */
/* RT_USING_CPUTIME is not set */
......
bsp/stm32/libraries/templates/stm32f10x/.config
浏览文件 @ c4118f58
......@@ -110,6 +110,7 @@ CONFIG_FINSH_ARG_MAX=10
CONFIG_RT_USING_DEVICE_IPC=y
CONFIG_RT_PIPE_BUFSZ=512
CONFIG_RT_USING_SERIAL=y
CONFIG_RT_SERIAL_USING_DMA=y
# CONFIG_RT_USING_CAN is not set
# CONFIG_RT_USING_HWTIMER is not set
# CONFIG_RT_USING_CPUTIME is not set
......
bsp/stm32/libraries/templates/stm32f10x/rtconfig.h
浏览文件 @ c4118f58
......@@ -76,6 +76,7 @@
#define RT_USING_DEVICE_IPC
#define RT_PIPE_BUFSZ 512
#define RT_USING_SERIAL
#define RT_SERIAL_USING_DMA
#define RT_USING_PIN
/* Using WiFi */
......
bsp/stm32/libraries/templates/stm32f4xx/.config
浏览文件 @ c4118f58
......@@ -110,6 +110,7 @@ CONFIG_FINSH_ARG_MAX=10
CONFIG_RT_USING_DEVICE_IPC=y
CONFIG_RT_PIPE_BUFSZ=512
CONFIG_RT_USING_SERIAL=y
CONFIG_RT_SERIAL_USING_DMA=y
# CONFIG_RT_USING_CAN is not set
# CONFIG_RT_USING_HWTIMER is not set
# CONFIG_RT_USING_CPUTIME is not set
......
bsp/stm32/libraries/templates/stm32f4xx/rtconfig.h
浏览文件 @ c4118f58
......@@ -76,6 +76,7 @@
#define RT_USING_DEVICE_IPC
#define RT_PIPE_BUFSZ 512
#define RT_USING_SERIAL
#define RT_SERIAL_USING_DMA
#define RT_USING_PIN
/* Using WiFi */
......
bsp/stm32/libraries/templates/stm32l4xx/.config
浏览文件 @ c4118f58
......@@ -110,6 +110,7 @@ CONFIG_FINSH_ARG_MAX=10
CONFIG_RT_USING_DEVICE_IPC=y
CONFIG_RT_PIPE_BUFSZ=512
CONFIG_RT_USING_SERIAL=y
CONFIG_RT_SERIAL_USING_DMA=y
# CONFIG_RT_USING_CAN is not set
# CONFIG_RT_USING_HWTIMER is not set
# CONFIG_RT_USING_CPUTIME is not set
......
bsp/stm32/libraries/templates/stm32l4xx/rtconfig.h
浏览文件 @ c4118f58
......@@ -76,6 +76,7 @@
#define RT_USING_DEVICE_IPC
#define RT_PIPE_BUFSZ 512
#define RT_USING_SERIAL
#define RT_SERIAL_USING_DMA
#define RT_USING_PIN
/* Using WiFi */
......
bsp/stm32f0x/rtconfig.h
浏览文件 @ c4118f58
......@@ -66,6 +66,7 @@
#define RT_USING_DEVICE_IPC
// <bool name="RT_USING_SERIAL" description="Using Serial" default="true" />
#define RT_USING_SERIAL
#define RT_SERIAL_USING_DMA
/* SECTION: Console options */
#define RT_USING_CONSOLE
......
bsp/stm32f107/.config
浏览文件 @ c4118f58
此差异已折叠。
bsp/stm32f107/applications/application.c 已删除 100644 → 0
浏览文件 @ cf7292d4
此差异已折叠。
bsp/stm32f107/applications/main.c 0 → 100644
浏览文件 @ c4118f58
此差异已折叠。
bsp/stm32f107/applications/startup.c 已删除 100644 → 0
浏览文件 @ cf7292d4
此差异已折叠。
bsp/stm32f107/drivers/board.c
浏览文件 @ c4118f58
此差异已折叠。
bsp/stm32f107/drivers/board.h
浏览文件 @ c4118f58
此差异已折叠。
bsp/stm32f107/project.uvprojx
浏览文件 @ c4118f58
此差异已折叠。
bsp/stm32f107/rtconfig.h
浏览文件 @ c4118f58
此差异已折叠。
bsp/stm32f10x-HAL/.config
浏览文件 @ c4118f58
此差异已折叠。
bsp/stm32f10x-HAL/rtconfig.h
浏览文件 @ c4118f58
此差异已折叠。
bsp/stm32f10x/.config
浏览文件 @ c4118f58
此差异已折叠。
bsp/stm32f10x/rtconfig.h
浏览文件 @ c4118f58
此差异已折叠。
bsp/stm32f40x/.config
浏览文件 @ c4118f58
此差异已折叠。
bsp/stm32f40x/rtconfig.h
浏览文件 @ c4118f58
此差异已折叠。
bsp/stm32f411-nucleo/.config
浏览文件 @ c4118f58
此差异已折叠。
bsp/stm32f411-nucleo/rtconfig.h
浏览文件 @ c4118f58
此差异已折叠。
bsp/stm32f429-apollo/.config
浏览文件 @ c4118f58
此差异已折叠。
bsp/stm32f429-apollo/rtconfig.h
浏览文件 @ c4118f58
此差异已折叠。
bsp/stm32f429-armfly/.config
浏览文件 @ c4118f58
此差异已折叠。
bsp/stm32f429-armfly/rtconfig.h
浏览文件 @ c4118f58
此差异已折叠。
bsp/stm32f429-disco/.config
浏览文件 @ c4118f58
此差异已折叠。
bsp/stm32f429-disco/rtconfig.h
浏览文件 @ c4118f58
此差异已折叠。
bsp/stm32f4xx-HAL/.config
浏览文件 @ c4118f58
此差异已折叠。
bsp/stm32f4xx-HAL/rtconfig.h
浏览文件 @ c4118f58
此差异已折叠。
bsp/stm32f7-disco/.config
浏览文件 @ c4118f58
此差异已折叠。
bsp/stm32f7-disco/rtconfig.h
浏览文件 @ c4118f58
此差异已折叠。
bsp/stm32h743-nucleo/.config
浏览文件 @ c4118f58
此差异已折叠。
bsp/stm32h743-nucleo/rtconfig.h
浏览文件 @ c4118f58
此差异已折叠。
bsp/stm32l072/rtconfig.h
浏览文件 @ c4118f58
此差异已折叠。
bsp/stm32l475-iot-disco/rtconfig.h
浏览文件 @ c4118f58
此差异已折叠。
bsp/stm32l476-nucleo/.config
浏览文件 @ c4118f58
此差异已折叠。
bsp/stm32l476-nucleo/rtconfig.h
浏览文件 @ c4118f58
此差异已折叠。
bsp/tm4c129x/.config
浏览文件 @ c4118f58
此差异已折叠。
bsp/tm4c129x/rtconfig.h
浏览文件 @ c4118f58
此差异已折叠。
bsp/tms320f28379d/.config
浏览文件 @ c4118f58
此差异已折叠。
bsp/tms320f28379d/rtconfig.h
浏览文件 @ c4118f58
此差异已折叠。
bsp/x1000/.config
浏览文件 @ c4118f58
此差异已折叠。
bsp/x1000/rtconfig.h
浏览文件 @ c4118f58
此差异已折叠。
bsp/xplorer4330/M0/rtconfig.h
浏览文件 @ c4118f58
此差异已折叠。
bsp/xplorer4330/M4/rtconfig.h
浏览文件 @ c4118f58
此差异已折叠。
bsp/zynq7000/rtconfig.h
浏览文件 @ c4118f58
此差异已折叠。
components/drivers/wlan/wlan_dev.c
浏览文件 @ c4118f58
此差异已折叠。
components/drivers/wlan/wlan_dev.h
浏览文件 @ c4118f58
此差异已折叠。
components/drivers/wlan/wlan_mgnt.c
浏览文件 @ c4118f58
此差异已折叠。
components/drivers/wlan/wlan_mgnt.h
浏览文件 @ c4118f58
此差异已折叠。
include/rtdef.h
浏览文件 @ c4118f58
此差异已折叠。
libcpu/risc-v/k210/interrupt.c 0 → 100644
浏览文件 @ c4118f58
此差异已折叠。
libcpu/risc-v/k210/interrupt_gcc.S 0 → 100644
浏览文件 @ c4118f58
此差异已折叠。
libcpu/risc-v/k210/startup_gcc.S 0 → 100644
浏览文件 @ c4118f58
此差异已折叠。
libcpu/risc-v/k210/tick.c 0 → 100644
浏览文件 @ c4118f58
此差异已折叠。
libcpu/risc-v/k210/tick.h 0 → 100644
浏览文件 @ c4118f58
此差异已折叠。
src/scheduler.c
浏览文件 @ c4118f58
此差异已折叠。
tools/building.py
浏览文件 @ c4118f58
此差异已折叠。
tools/mkdist.py
浏览文件 @ c4118f58
此差异已折叠。
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或