[bsp/nuvoton_m487] Remove the w25qxx driver code.

bsp/nuvoton_m487/.config

@@ -64,7 +64,8 @@ CONFIG_RT_USING_DEVICE=y
 CONFIG_RT_USING_CONSOLE=y
 CONFIG_RT_CONSOLEBUF_SIZE=128
 CONFIG_RT_CONSOLE_DEVICE_NAME="uart0"
-CONFIG_RT_VER_NUM=0x40001
+CONFIG_RT_VER_NUM=0x40002
+# CONFIG_RT_USING_CPU_FFS is not set
 # CONFIG_ARCH_CPU_STACK_GROWS_UPWARD is not set
 
 #
@@ -137,6 +138,7 @@ CONFIG_RT_USING_DFS_DEVFS=y
 #
 CONFIG_RT_USING_DEVICE_IPC=y
 CONFIG_RT_PIPE_BUFSZ=64
+# CONFIG_RT_USING_SYSTEM_WORKQUEUE is not set
 CONFIG_RT_USING_SERIAL=y
 CONFIG_RT_SERIAL_USING_DMA=y
 CONFIG_RT_SERIAL_RB_BUFSZ=64
@@ -156,15 +158,22 @@ CONFIG_RT_SERIAL_RB_BUFSZ=64
 CONFIG_RT_USING_SPI=y
 # CONFIG_RT_USING_QSPI is not set
 # CONFIG_RT_USING_SPI_MSD is not set
-# CONFIG_RT_USING_SFUD is not set
-CONFIG_RT_USING_W25QXX=y
-# CONFIG_RT_USING_GD is not set
+CONFIG_RT_USING_SFUD=y
+CONFIG_RT_SFUD_USING_SFDP=y
+CONFIG_RT_SFUD_USING_FLASH_INFO_TABLE=y
+# CONFIG_RT_SFUD_USING_QSPI is not set
+# CONFIG_RT_DEBUG_SFUD is not set
 # CONFIG_RT_USING_ENC28J60 is not set
 # CONFIG_RT_USING_SPI_WIFI is not set
 # CONFIG_RT_USING_WDT is not set
 # CONFIG_RT_USING_AUDIO is not set
 # CONFIG_RT_USING_SENSOR is not set
 
+#
+# Using Hardware Crypto drivers
+#
+# CONFIG_RT_USING_HWCRYPTO is not set
+
 #
 # Using WiFi
 #
@@ -196,6 +205,12 @@ CONFIG_RT_USING_POSIX=y
 #
 # CONFIG_RT_USING_SAL is not set
 
+#
+# Network interface device
+#
+# CONFIG_RT_USING_NETDEV is not set
+CONFIG_NETDEV_USING_PING=y
+
 #
 # light weight TCP/IP stack
 #
@@ -240,6 +255,7 @@ CONFIG_RT_LWIP_ETHTHREAD_STACKSIZE=768
 CONFIG_RT_LWIP_ETHTHREAD_MBOX_SIZE=8
 # CONFIG_RT_LWIP_REASSEMBLY_FRAG is not set
 CONFIG_LWIP_NETIF_STATUS_CALLBACK=1
+CONFIG_LWIP_NETIF_LINK_CALLBACK=1
 CONFIG_SO_REUSE=1
 CONFIG_LWIP_SO_RCVTIMEO=1
 CONFIG_LWIP_SO_SNDTIMEO=1
@@ -248,6 +264,7 @@ CONFIG_LWIP_SO_RCVBUF=1
 CONFIG_LWIP_NETIF_LOOPBACK=0
 # CONFIG_RT_LWIP_STATS is not set
 # CONFIG_RT_LWIP_USING_HW_CHECKSUM is not set
+CONFIG_RT_LWIP_USING_PING=y
 # CONFIG_RT_LWIP_DEBUG is not set
 
 #
@@ -269,7 +286,6 @@ CONFIG_LWIP_NETIF_LOOPBACK=0
 #
 # Utilities
 #
-# CONFIG_RT_USING_LOGTRACE is not set
 # CONFIG_RT_USING_RYM is not set
 # CONFIG_RT_USING_ULOG is not set
 # CONFIG_RT_USING_UTEST is not set
@@ -311,6 +327,7 @@ CONFIG_LWIP_NETIF_LOOPBACK=0
 # CONFIG_PKG_USING_NOPOLL is not set
 # CONFIG_PKG_USING_NETUTILS is not set
 # CONFIG_PKG_USING_AT_DEVICE is not set
+# CONFIG_PKG_USING_ATSRV_SOCKET is not set
 # CONFIG_PKG_USING_WIZNET is not set
 
 #
@@ -323,6 +340,9 @@ CONFIG_LWIP_NETIF_LOOPBACK=0
 # CONFIG_PKG_USING_TENCENT_IOTKIT is not set
 # CONFIG_PKG_USING_NIMBLE is not set
 # CONFIG_PKG_USING_OTA_DOWNLOADER is not set
+# CONFIG_PKG_USING_IPMSG is not set
+# CONFIG_PKG_USING_LSSDP is not set
+# CONFIG_PKG_USING_AIRKISS_OPEN is not set
 
 #
 # security packages
@@ -343,6 +363,7 @@ CONFIG_LWIP_NETIF_LOOPBACK=0
 #
 # CONFIG_PKG_USING_OPENMV is not set
 # CONFIG_PKG_USING_MUPDF is not set
+# CONFIG_PKG_USING_STEMWIN is not set
 
 #
 # tools packages
@@ -371,35 +392,32 @@ CONFIG_LWIP_NETIF_LOOPBACK=0
 # CONFIG_PKG_USING_CMSIS is not set
 # CONFIG_PKG_USING_DFS_YAFFS is not set
 # CONFIG_PKG_USING_LITTLEFS is not set
+# CONFIG_PKG_USING_THREAD_POOL is not set
 
 #
 # peripheral libraries and drivers
 #
-
-#
-# sensors drivers
-#
-# CONFIG_PKG_USING_LSM6DSL is not set
-# CONFIG_PKG_USING_LPS22HB is not set
-# CONFIG_PKG_USING_HTS221 is not set
-# CONFIG_PKG_USING_LSM303AGR is not set
-# CONFIG_PKG_USING_BME280 is not set
-# CONFIG_PKG_USING_BMA400 is not set
-# CONFIG_PKG_USING_BMI160_BMX160 is not set
-# CONFIG_PKG_USING_SPL0601 is not set
+# CONFIG_PKG_USING_SENSORS_DRIVERS is not set
 # CONFIG_PKG_USING_REALTEK_AMEBA is not set
 # CONFIG_PKG_USING_SHT2X is not set
-# CONFIG_PKG_USING_AHT10 is not set
 # CONFIG_PKG_USING_AP3216C is not set
 # CONFIG_PKG_USING_STM32_SDIO is not set
 # CONFIG_PKG_USING_ICM20608 is not set
 # CONFIG_PKG_USING_U8G2 is not set
 # CONFIG_PKG_USING_BUTTON is not set
-# CONFIG_PKG_USING_MPU6XXX is not set
 # CONFIG_PKG_USING_PCF8574 is not set
 # CONFIG_PKG_USING_SX12XX is not set
 # CONFIG_PKG_USING_SIGNAL_LED is not set
+# CONFIG_PKG_USING_LEDBLINK is not set
+# CONFIG_PKG_USING_WM_LIBRARIES is not set
 # CONFIG_PKG_USING_KENDRYTE_SDK is not set
+# CONFIG_PKG_USING_INFRARED is not set
+# CONFIG_PKG_USING_ROSSERIAL is not set
+# CONFIG_PKG_USING_AT24CXX is not set
+# CONFIG_PKG_USING_MOTIONDRIVER2RTT is not set
+# CONFIG_PKG_USING_AD7746 is not set
+# CONFIG_PKG_USING_PCA9685 is not set
+# CONFIG_PKG_USING_I2C_TOOLS is not set
 
 #
 # miscellaneous packages
@@ -415,6 +433,7 @@ CONFIG_LWIP_NETIF_LOOPBACK=0
 # CONFIG_PKG_USING_DSTR is not set
 # CONFIG_PKG_USING_TINYFRAME is not set
 # CONFIG_PKG_USING_KENDRYTE_DEMO is not set
+# CONFIG_PKG_USING_DIGITALCTRL is not set
 
 #
 # samples: kernel and components samples
@@ -425,3 +444,4 @@ CONFIG_LWIP_NETIF_LOOPBACK=0
 # CONFIG_PKG_USING_PERIPHERAL_SAMPLES is not set
 # CONFIG_PKG_USING_HELLO is not set
 # CONFIG_PKG_USING_VI is not set
+# CONFIG_PKG_USING_NNOM is not set

bsp/nuvoton_m487/driver/drv_spiflash.c

@@ -11,11 +11,9 @@
 #include <rtdevice.h>
 
 #ifdef RT_USING_SPI
-#if defined(RT_USING_W25QXX) || defined(RT_USING_SFUD)
+
+#if defined(RT_USING_SFUD)
     static struct rt_spi_device spi_device;
-#ifdef RT_USING_W25QXX
-    #include "spi_flash_w25qxx.h"
-#elif defined(RT_USING_SFUD)
     #include "spi_flash.h"
     #include "spi_flash_sfud.h"
 #endif
@@ -25,11 +23,7 @@ static int rt_hw_spi_flash_init(void)
 {
     rt_spi_bus_attach_device(&spi_device, "qspi01", "qspi0", RT_NULL);
 
-#ifdef RT_USING_W25QXX
-
-    return w25qxx_init("flash0", "qspi01");
-
-#elif defined(RT_USING_SFUD)
+#if defined(RT_USING_SFUD)
 
     if (rt_sfud_flash_probe("flash0", "qspi01") == RT_NULL)
     {
@@ -40,6 +34,6 @@ static int rt_hw_spi_flash_init(void)
 }
 INIT_COMPONENT_EXPORT(rt_hw_spi_flash_init);
 
-#endif
-#endif
+
+#endif /* RT_USING_SPI */
 

bsp/nuvoton_m487/rtconfig.h

@@ -37,7 +37,7 @@
 #define RT_USING_CONSOLE
 #define RT_CONSOLEBUF_SIZE 128
 #define RT_CONSOLE_DEVICE_NAME "uart0"
-#define RT_VER_NUM 0x40001
+#define RT_VER_NUM 0x40002
 
 /* RT-Thread Components */
 
@@ -93,7 +93,12 @@
 #define RT_SERIAL_USING_DMA
 #define RT_SERIAL_RB_BUFSZ 64
 #define RT_USING_SPI
-#define RT_USING_W25QXX
+#define RT_USING_SFUD
+#define RT_SFUD_USING_SFDP
+#define RT_SFUD_USING_FLASH_INFO_TABLE
+
+/* Using Hardware Crypto drivers */
+
 
 /* Using WiFi */
 
@@ -111,6 +116,10 @@
 /* Socket abstraction layer */
 
 
+/* Network interface device */
+
+#define NETDEV_USING_PING
+
 /* light weight TCP/IP stack */
 
 #define RT_USING_LWIP
@@ -145,11 +154,13 @@
 #define RT_LWIP_ETHTHREAD_STACKSIZE 768
 #define RT_LWIP_ETHTHREAD_MBOX_SIZE 8
 #define LWIP_NETIF_STATUS_CALLBACK 1
+#define LWIP_NETIF_LINK_CALLBACK 1
 #define SO_REUSE 1
 #define LWIP_SO_RCVTIMEO 1
 #define LWIP_SO_SNDTIMEO 1
 #define LWIP_SO_RCVBUF 1
 #define LWIP_NETIF_LOOPBACK 0
+#define RT_LWIP_USING_PING
 
 /* Modbus master and slave stack */
 
@@ -196,8 +207,6 @@
 
 /* peripheral libraries and drivers */
 
-/* sensors drivers */
-
 
 /* miscellaneous packages */