Import Ethernet driver STM32F2x7 V1.0.0

git-svn-id: https://rt-thread.googlecode.com/svn/trunk@2085 bbd45198-f89e-11dd-88c7-29a3b14d5316

bsp/stm32f20x/Libraries/STM32F2x7_ETH_Driver/inc/stm32f2x7_eth_conf.h

+/**
+  ******************************************************************************
+  * @file    stm32f2x7_eth_conf.h
+  * @author  MCD Application Team
+  * @version V1.0.0
+  * @date    13-June-2011
+  * @brief   Configuration file for the STM32F2x7 Ethernet driver.  
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F2x7_ETH_CONF_H
+#define __STM32F2x7_ETH_CONF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f2xx.h"
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* Uncomment the line below when using time stamping and/or IPv4 checksum offload */
+#define USE_ENHANCED_DMA_DESCRIPTORS
+
+/* Uncomment the line below if you want to use user defined Delay function
+   (for precise timing), otherwise default _eth_delay_ function defined within
+   the Ethernet driver is used (less precise timing) */
+//#define USE_Delay
+
+#ifdef USE_Delay
+  #include "main.h"                /* Header file where the Delay function prototype is exported */  
+  #define _eth_delay_    Delay     /* User can provide more timing precise _eth_delay_ function */
+#else
+  #define _eth_delay_    ETH_Delay /* Default _eth_delay_ function with less precise timing */
+#endif
+
+
+/* Uncomment the line below to allow custom configuration of the Ethernet driver buffers */    
+#define CUSTOM_DRIVER_BUFFERS_CONFIG   
+
+#ifdef  CUSTOM_DRIVER_BUFFERS_CONFIG
+/* Redefinition of the Ethernet driver buffers size and count */   
+ #define ETH_RX_BUF_SIZE    ETH_MAX_PACKET_SIZE  /* buffer size for receive */
+ #define ETH_TX_BUF_SIZE    ETH_MAX_PACKET_SIZE  /* buffer size for transmit */
+ #define ETH_RXBUFNB        4                    /* 4 Rx buffers of size ETH_RX_BUF_SIZE */
+ #define ETH_TXBUFNB        2                    /* 2  Tx buffers of size ETH_TX_BUF_SIZE */
+#endif
+
+
+/* PHY configuration section **************************************************/
+/* PHY Reset delay */ 
+#define PHY_RESET_DELAY    ((uint32_t)0x000FFFFF) 
+/* PHY Configuration delay */ 
+#define PHY_CONFIG_DELAY   ((uint32_t)0x00FFFFFF)
+
+/* The PHY status register value change from a PHY to another, so the user have 
+   to update this value depending on the used external PHY */
+#define PHY_SR    	((uint16_t)16) /* Value for DP83848 PHY */
+#define PHY_MICR	((uint16_t)0x11)
+#define PHY_MISR	((uint16_t)0x12)
+#define PHY_LEDCR	((uint16_t)0x18)
+#define PHY_CR		((uint16_t)0x19)
+#define PHY_CDCTRL1	((uint16_t)0x1B)
+#define PHY_FCSCR	((uint16_t)0x14)
+
+#define MDIX_EN		((uint16_t)1<<15)
+#define BIST_START	((uint16_t)1<<8)
+#define BIST_STATUS	((uint16_t)1<<9)
+#define BIST_CONT_MODE	((uint16_t)1<<5)
+#define BIST_ERROR_COUNT(n) (n&0xFF00)>>8
+
+/* The Speed and Duplex mask values change from a PHY to another, so the user
+   have to update this value depending on the used external PHY */
+#define PHY_SPEED_STATUS            ((uint16_t)0x0002) /* Value for DP83848 PHY */
+#define PHY_DUPLEX_STATUS           ((uint16_t)0x0004) /* Value for DP83848 PHY */
+
+   
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions ------------------------------------------------------- */  
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F2x7_ETH_CONF_H */
+
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
+

bsp/stm32f20x/Libraries/STM32F2x7_ETH_Driver/inc/stm32f2x7_eth_conf_template.h

+/**
+  ******************************************************************************
+  * @file    stm32f2x7_eth_conf_template.h
+  * @author  MCD Application Team
+  * @version V1.0.0
+  * @date    25-April-2011
+  * @brief   Configuration file for the STM32F2x7 Ethernet driver.
+  *          This file should be copied to the application folder and renamed to
+  *          stm32f2x7_eth_conf.h    
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F2x7_ETH_CONF_H
+#define __STM32F2x7_ETH_CONF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f2xx.h"
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* Uncomment the line below when using time stamping and/or IPv4 checksum offload */
+#define USE_ENHANCED_DMA_DESCRIPTORS
+
+/* Uncomment the line below if you want to use user defined Delay function
+   (for precise timing), otherwise default _eth_delay_ function defined within
+   the Ethernet driver is used (less precise timing) */
+//#define USE_Delay
+
+#ifdef USE_Delay
+  #include "main.h"                /* Header file where the Delay function prototype is exported */  
+  #define _eth_delay_    Delay     /* User can provide more timing precise _eth_delay_ function */
+#else
+  #define _eth_delay_    ETH_Delay /* Default _eth_delay_ function with less precise timing */
+#endif
+
+/* Uncomment the line below to allow custom configuration of the Ethernet driver buffers */    
+//#define CUSTOM_DRIVER_BUFFERS_CONFIG   
+
+#ifdef  CUSTOM_DRIVER_BUFFERS_CONFIG
+/* Redefinition of the Ethernet driver buffers size and count */   
+ #define ETH_RX_BUF_SIZE    ETH_MAX_PACKET_SIZE /* buffer size for receive */
+ #define ETH_TX_BUF_SIZE    ETH_MAX_PACKET_SIZE /* buffer size for transmit */
+ #define ETH_RXBUFNB        20                  /* 20 Rx buffers of size ETH_RX_BUF_SIZE */
+ #define ETH_TXBUFNB        5                   /* 5  Tx buffers of size ETH_TX_BUF_SIZE */
+#endif
+
+
+/* PHY configuration section **************************************************/
+/* PHY Reset delay */ 
+#define PHY_RESET_DELAY    ((uint32_t)0x000FFFFF) 
+/* PHY Configuration delay */ 
+#define PHY_CONFIG_DELAY   ((uint32_t)0x00FFFFFF)
+
+/* The PHY status register value change from a PHY to another, so the user have 
+   to update this value depending on the used external PHY */
+#define PHY_SR    ((uint16_t)16) /* Value for DP83848 PHY */
+
+/* The Speed and Duplex mask values change from a PHY to another, so the user
+   have to update this value depending on the used external PHY */
+#define PHY_SPEED_STATUS            ((uint16_t)0x0002) /* Value for DP83848 PHY */
+#define PHY_DUPLEX_STATUS           ((uint16_t)0x0004) /* Value for DP83848 PHY */
+
+   
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions ------------------------------------------------------- */  
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F2x7_ETH_CONF_H */
+
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
+