Skip to content

R
rt-thread

人间散章 / rt-thread
与 Fork 源项目一致

Fork自 RT-Thread / rt-thread

通知 1
Star 1
Fork 0
R
rt-thread

前往新版Gitcode，体验更适合开发者的 AI 搜索 >>

提交 3b20db19 编写于 作者: armink_ztl's avatar armink_ztl
浏览文件
操作

[DeviceDriver] Update SFUD (Serial Flash Universal Driver) library to latest version.

上级 15b2feb6
隐藏空白更改
内联 并排
Showing with 235 addition and 14 deletion
components/drivers/spi/sfud/inc/sfud.h
浏览文件 @ 3b20db19
/*
* This file is part of the Serial Flash Universal Driver Library.
*
* Copyright (c) 2016, Armink, <armink.ztl@gmail.com>
* Copyright (c) 2016-2018, Armink, <armink.ztl@gmail.com>
*
* Permission is hereby granted, free of charge, to any person obtaining
* a copy of this software and associated documentation files (the
......@@ -75,6 +75,23 @@ size_t sfud_get_device_num(void);
*/
const sfud_flash *sfud_get_device_table(void);
#ifdef SFUD_USING_QSPI
/**
* Enbale the fast read mode in QSPI flash mode. Default read mode is normal SPI mode.
*
* it will find the appropriate fast-read instruction to replace the read instruction(0x03)
* fast-read instruction @see SFUD_FLASH_EXT_INFO_TABLE
*
* @note When Flash is in QSPI mode, the method must be called after sfud_device_init().
*
* @param flash flash device
* @param data_line_width the data lines max width which QSPI bus supported, such as 1, 2, 4
*
* @return result
*/
sfud_err sfud_qspi_fast_read_enable(sfud_flash *flash, uint8_t data_line_width);
#endif /* SFUD_USING_QSPI */
/**
* read flash data
*
......
components/drivers/spi/sfud/inc/sfud_cfg.h
浏览文件 @ 3b20db19
......@@ -45,6 +45,13 @@
#define SFUD_USING_SFDP
#endif
/**
* SFUD will support QSPI mode.
*/
#ifdef RT_SFUD_USING_QSPI
#define SFUD_USING_QSPI
#endif
/**
* Using probe flash JEDEC ID then query defined supported flash chip information table. @see SFUD_FLASH_CHIP_TABLE
*/
......
components/drivers/spi/sfud/inc/sfud_def.h
浏览文件 @ 3b20db19
/*
* This file is part of the Serial Flash Universal Driver Library.
*
* Copyright (c) 2016, Armink, <armink.ztl@gmail.com>
* Copyright (c) 2016-2018, Armink, <armink.ztl@gmail.com>
*
* Permission is hereby granted, free of charge, to any person obtaining
* a copy of this software and associated documentation files (the
......@@ -78,7 +78,7 @@ if (!(EXPR)) \
else {if (__delay_temp) {__delay_temp();} retry --;}
/* software version number */
#define SFUD_SW_VERSION "1.0.6"
#define SFUD_SW_VERSION "1.1.0"
/*
* all defined supported command
*/
......@@ -118,6 +118,22 @@ if (!(EXPR)) \
#define SFUD_CMD_READ_DATA 0x03
#endif
#ifndef SFUD_CMD_DUAL_OUTPUT_READ_DATA
#define SFUD_CMD_DUAL_OUTPUT_READ_DATA 0x3B
#endif
#ifndef SFUD_CMD_DUAL_IO_READ_DATA
#define SFUD_CMD_DUAL_IO_READ_DATA 0xBB
#endif
#ifndef SFUD_CMD_QUAD_IO_READ_DATA
#define SFUD_CMD_QUAD_IO_READ_DATA 0xEB
#endif
#ifndef SFUD_CMD_QUAD_OUTPUT_READ_DATA
#define SFUD_CMD_QUAD_OUTPUT_READ_DATA 0x6B
#endif
#ifndef SFUD_CMD_MANUFACTURER_DEVICE_ID
#define SFUD_CMD_MANUFACTURER_DEVICE_ID 0x90
#endif
......@@ -183,6 +199,21 @@ typedef enum {
SFUD_ERR_ADDR_OUT_OF_BOUND = 5, /**< address is out of flash bound */
} sfud_err;
#ifdef SFUD_USING_QSPI
/**
* QSPI flash read cmd format
*/
typedef struct {
uint8_t instruction;
uint8_t instruction_lines;
uint8_t address_size;
uint8_t address_lines;
uint8_t alternate_bytes_lines;
uint8_t dummy_cycles;
uint8_t data_lines;
} sfud_qspi_read_cmd_format;
#endif /* SFUD_USING_QSPI */
/* SPI bus write read data function type */
typedef sfud_err (*spi_write_read_func)(const uint8_t *write_buf, size_t write_size, uint8_t *read_buf, size_t read_size);
......@@ -218,7 +249,12 @@ typedef struct __sfud_spi {
char *name;
/* SPI bus write read data function */
sfud_err (*wr)(const struct __sfud_spi *spi, const uint8_t *write_buf, size_t write_size, uint8_t *read_buf,
size_t read_size);
size_t read_size);
#ifdef SFUD_USING_QSPI
/* QSPI fast read function */
sfud_err (*qspi_read)(const struct __sfud_spi *spi, uint32_t addr, sfud_qspi_read_cmd_format *qspi_read_cmd_format,
uint8_t *read_buf, size_t read_size);
#endif
/* lock SPI bus */
void (*lock)(const struct __sfud_spi *spi);
/* unlock SPI bus */
......@@ -243,6 +279,10 @@ typedef struct {
} retry;
void *user_data; /**< some user data */
#ifdef SFUD_USING_QSPI
sfud_qspi_read_cmd_format read_cmd_format; /**< fast read cmd format */
#endif
#ifdef SFUD_USING_SFDP
sfud_sfdp sfdp; /**< serial flash discoverable parameters by JEDEC standard */
#endif
......
components/drivers/spi/sfud/inc/sfud_flash_def.h
浏览文件 @ 3b20db19
/*
* This file is part of the Serial Flash Universal Driver Library.
*
* Copyright (c) 2016-2017, Armink, <armink.ztl@gmail.com>
* Copyright (c) 2016-2018, Armink, <armink.ztl@gmail.com>
*
* Permission is hereby granted, free of charge, to any person obtaining
* a copy of this software and associated documentation files (the
......@@ -59,11 +59,21 @@ typedef struct {
uint8_t type_id; /**< memory type ID */
uint8_t capacity_id; /**< capacity ID */
uint32_t capacity; /**< flash capacity (bytes) */
uint16_t write_mode; /**< write mode @see sfud_write_mode */
uint16_t write_mode; /**< write mode @see sfud_write_mode */
uint32_t erase_gran; /**< erase granularity (bytes) */
uint8_t erase_gran_cmd; /**< erase granularity size block command */
} sfud_flash_chip;
#ifdef SFUD_USING_QSPI
/* QSPI flash chip's extended information compared with SPI flash */
typedef struct {
uint8_t mf_id; /**< manufacturer ID */
uint8_t type_id; /**< memory type ID */
uint8_t capacity_id; /**< capacity ID */
uint8_t read_mode; /**< supported read mode on this qspi flash chip */
} sfud_qspi_flash_ext_info;
#endif
/* SFUD support manufacturer JEDEC ID */
#define SFUD_MF_ID_CYPRESS 0x01
#define SFUD_MF_ID_FUJITSU 0x04
......@@ -131,6 +141,42 @@ typedef struct {
}
#endif /* SFUD_USING_FLASH_INFO_TABLE */
#ifdef SFUD_USING_QSPI
/* This table saves flash read-fast instructions in QSPI mode,
* SFUD can use this table to select the most appropriate read instruction for flash.
* | mf_id | type_id | capacity_id | qspi_read_mode |
*/
#define SFUD_FLASH_EXT_INFO_TABLE \
{ \
/* W25Q40BV */ \
{SFUD_MF_ID_WINBOND, 0x40, 0x13, NORMAL_SPI_READ|DUAL_OUTPUT}, \
/* W25Q80JV */ \
{SFUD_MF_ID_WINBOND, 0x40, 0x14, NORMAL_SPI_READ|DUAL_OUTPUT}, \
/* W25Q16BV */ \
{SFUD_MF_ID_WINBOND, 0x40, 0x15, NORMAL_SPI_READ|DUAL_OUTPUT}, \
/* W25Q32BV */ \
{SFUD_MF_ID_WINBOND, 0x40, 0x16, NORMAL_SPI_READ|DUAL_OUTPUT}, \
/* W25Q64JV */ \
{SFUD_MF_ID_WINBOND, 0x40, 0x17, NORMAL_SPI_READ|DUAL_OUTPUT|DUAL_IO|QUAD_OUTPUT|QUAD_IO}, \
/* W25Q128JV */ \
{SFUD_MF_ID_WINBOND, 0x40, 0x18, NORMAL_SPI_READ|DUAL_OUTPUT|DUAL_IO|QUAD_OUTPUT|QUAD_IO}, \
/* W25Q256FV */ \
{SFUD_MF_ID_WINBOND, 0x40, 0x19, NORMAL_SPI_READ|DUAL_OUTPUT|DUAL_IO|QUAD_OUTPUT|QUAD_IO}, \
/* EN25Q32B */ \
{SFUD_MF_ID_EON, 0x30, 0x16, NORMAL_SPI_READ|DUAL_OUTPUT|QUAD_IO}, \
/* S25FL216K */ \
{SFUD_MF_ID_CYPRESS, 0x40, 0x15, NORMAL_SPI_READ|DUAL_OUTPUT}, \
/* A25L080 */ \
{SFUD_MF_ID_AMIC, 0x30, 0x14, NORMAL_SPI_READ|DUAL_OUTPUT|DUAL_IO}, \
/* A25LQ64 */ \
{SFUD_MF_ID_AMIC, 0x40, 0x17, NORMAL_SPI_READ|DUAL_OUTPUT|DUAL_IO|QUAD_IO}, \
/* MX25L3206E and KH25L3206E */ \
{SFUD_MF_ID_MICRONIX, 0x20, 0x16, NORMAL_SPI_READ|DUAL_OUTPUT}, \
/* GD25Q64B */ \
{SFUD_MF_ID_GIGADEVICE, 0x40, 0x17, NORMAL_SPI_READ|DUAL_OUTPUT}, \
}
#endif /* SFUD_USING_QSPI */
#ifdef __cplusplus
}
#endif
......
components/drivers/spi/sfud/src/sfud.c
浏览文件 @ 3b20db19
/*
* This file is part of the Serial Flash Universal Driver Library.
*
* Copyright (c) 2016, Armink, <armink.ztl@gmail.com>
* Copyright (c) 2016-2018, Armink, <armink.ztl@gmail.com>
*
* Permission is hereby granted, free of charge, to any person obtaining
* a copy of this software and associated documentation files (the
......@@ -46,6 +46,22 @@ static const sfud_mf mf_table[] = SFUD_MF_TABLE;
static const sfud_flash_chip flash_chip_table[] = SFUD_FLASH_CHIP_TABLE;
#endif
#ifdef SFUD_USING_QSPI
/**
* flash read data mode
*/
enum sfud_qspi_read_mode {
NORMAL_SPI_READ = 1 << 0, /**< mormal spi read mode */
DUAL_OUTPUT = 1 << 1, /**< qspi fast read dual output */
DUAL_IO = 1 << 2, /**< qspi fast read dual input/output */
QUAD_OUTPUT = 1 << 3, /**< qspi fast read quad output */
QUAD_IO = 1 << 4, /**< qspi fast read quad input/output */
};
/* QSPI flash chip's extended information table */
static const sfud_qspi_flash_ext_info qspi_flash_ext_info_table[] = SFUD_FLASH_EXT_INFO_TABLE;
#endif /* SFUD_USING_QSPI */
static sfud_err software_init(const sfud_flash *flash);
static sfud_err hardware_init(sfud_flash *flash);
static sfud_err page256_or_1_byte_write(const sfud_flash *flash, uint32_t addr, size_t size, uint16_t write_gran,
......@@ -146,11 +162,89 @@ const sfud_flash *sfud_get_device_table(void) {
return flash_table;
}
#ifdef SFUD_USING_QSPI
static void qspi_set_read_cmd_format(sfud_flash *flash, uint8_t ins, uint8_t ins_lines, uint8_t addr_lines,
uint8_t dummy_cycles, uint8_t data_lines) {
/* if medium size greater than 16Mb, use 4-Byte address, instruction should be added one */
if (flash->chip.capacity <= 0x1000000) {
flash->read_cmd_format.instruction = ins;
flash->read_cmd_format.address_size = 24;
} else {
flash->read_cmd_format.instruction = ins + 1;
flash->read_cmd_format.address_size = 32;
}
flash->read_cmd_format.instruction_lines = ins_lines;
flash->read_cmd_format.address_lines = addr_lines;
flash->read_cmd_format.alternate_bytes_lines = 0;
flash->read_cmd_format.dummy_cycles = dummy_cycles;
flash->read_cmd_format.data_lines = data_lines;
}
/**
* Enbale the fast read mode in QSPI flash mode. Default read mode is normal SPI mode.
*
* it will find the appropriate fast-read instruction to replace the read instruction(0x03)
* fast-read instruction @see SFUD_FLASH_EXT_INFO_TABLE
*
* @note When Flash is in QSPI mode, the method must be called after sfud_device_init().
*
* @param flash flash device
* @param data_line_width the data lines max width which QSPI bus supported, such as 1, 2, 4
*
* @return result
*/
sfud_err sfud_qspi_fast_read_enable(sfud_flash *flash, uint8_t data_line_width) {
size_t i = 0;
uint8_t read_mode = NORMAL_SPI_READ;
sfud_err result = SFUD_SUCCESS;
SFUD_ASSERT(flash);
SFUD_ASSERT(data_line_width == 1 || data_line_width == 2 || data_line_width == 4);
/* get read_mode, If don't found, the default is SFUD_QSPI_NORMAL_SPI_READ */
for (i = 0; i < sizeof(qspi_flash_ext_info_table) / sizeof(sfud_qspi_flash_ext_info); i++) {
if ((qspi_flash_ext_info_table[i].mf_id == flash->chip.mf_id)
&& (qspi_flash_ext_info_table[i].type_id == flash->chip.type_id)
&& (qspi_flash_ext_info_table[i].capacity_id == flash->chip.capacity_id)) {
read_mode = qspi_flash_ext_info_table[i].read_mode;
}
}
/* determine qspi supports which read mode and set read_cmd_format struct */
switch (data_line_width) {
case 1:
qspi_set_read_cmd_format(flash, SFUD_CMD_READ_DATA, 1, 1, 0, 1);
break;
case 2:
if (read_mode & DUAL_IO) {
qspi_set_read_cmd_format(flash, SFUD_CMD_DUAL_IO_READ_DATA, 1, 2, 8, 2);
} else if (read_mode & DUAL_OUTPUT) {
qspi_set_read_cmd_format(flash, SFUD_CMD_DUAL_OUTPUT_READ_DATA, 1, 1, 8, 2);
} else {
qspi_set_read_cmd_format(flash, SFUD_CMD_READ_DATA, 1, 1, 0, 1);
}
break;
case 4:
if (read_mode & QUAD_IO) {
qspi_set_read_cmd_format(flash, SFUD_CMD_QUAD_IO_READ_DATA, 1, 4, 6, 4);
} else if (read_mode & QUAD_OUTPUT) {
qspi_set_read_cmd_format(flash, SFUD_CMD_QUAD_OUTPUT_READ_DATA, 1, 1, 8, 4);
} else {
qspi_set_read_cmd_format(flash, SFUD_CMD_READ_DATA, 1, 1, 0, 1);
}
break;
}
return result;
}
#endif /* SFUD_USING_QSPI */
/**
* hardware initialize
*/
static sfud_err hardware_init(sfud_flash *flash) {
extern sfud_err sfud_spi_port_init(sfud_flash *flash);
extern sfud_err sfud_spi_port_init(sfud_flash * flash);
sfud_err result = SFUD_SUCCESS;
size_t i;
......@@ -162,6 +256,9 @@ static sfud_err hardware_init(sfud_flash *flash) {
return result;
}
/* set default read instruction */
flash->read_cmd_format.instruction = SFUD_CMD_READ_DATA;
/* SPI write read function must be initialize */
SFUD_ASSERT(flash->spi.wr);
/* if the user don't configure flash chip information then using SFDP parameter or static flash parameter table */
......@@ -315,10 +412,17 @@ sfud_err sfud_read(const sfud_flash *flash, uint32_t addr, size_t size, uint8_t
result = wait_busy(flash);
if (result == SFUD_SUCCESS) {
cmd_data[0] = SFUD_CMD_READ_DATA;
make_adress_byte_array(flash, addr, &cmd_data[1]);
cmd_size = flash->addr_in_4_byte ? 5 : 4;
result = spi->wr(spi, cmd_data, cmd_size, data, size);
#ifdef SFUD_USING_QSPI
if (flash->read_cmd_format.instruction != SFUD_CMD_READ_DATA) {
result = spi->qspi_read(spi, addr, (sfud_qspi_read_cmd_format *)&flash->read_cmd_format, data, size);
} else
#endif
{
cmd_data[0] = SFUD_CMD_READ_DATA;
make_adress_byte_array(flash, addr, &cmd_data[1]);
cmd_size = flash->addr_in_4_byte ? 5 : 4;
result = spi->wr(spi, cmd_data, cmd_size, data, size);
}
}
/* unlock SPI */
if (spi->unlock) {
......@@ -328,7 +432,6 @@ sfud_err sfud_read(const sfud_flash *flash, uint32_t addr, size_t size, uint8_t
return result;
}
/**
* erase all flash data
*
......@@ -715,8 +818,16 @@ static sfud_err reset(const sfud_flash *flash) {
SFUD_ASSERT(flash);
cmd_data[0] = SFUD_CMD_ENABLE_RESET;
result = spi->wr(spi, cmd_data, 1, NULL, 0);
if (result == SFUD_SUCCESS) {
result = wait_busy(flash);
} else {
SFUD_INFO("Error: Flash device reset failed.");
return result;
}
cmd_data[1] = SFUD_CMD_RESET;
result = spi->wr(spi, cmd_data, 2, NULL, 0);
result = spi->wr(spi, &cmd_data[1], 1, NULL, 0);
if (result == SFUD_SUCCESS) {
result = wait_busy(flash);
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或