- 19 7月, 2007 40 次提交
-
-
由 Matthew Garrett 提交于
Alter the tuner type for the WinTV USB UK PAL model. Signed-off-by: NMatthew Garrett <mjg59@srcf.ucam.org> Signed-off-by: NThierry MERLE <thierry.merle@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Thierry MERLE 提交于
- Hauppauge WinTV USB SECAM_L fixed (needed some picture X and Y shiftings) Signed-off-by: NThierry MERLE <thierry.merle@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 James Le Cuirot 提交于
It has been confirmed that the FlyDVB IR codes currently in the kernel work with the LifeView FlyDVB-S LR300. This one line addition adds it to the list of supported cards. Signed-off-by: NJames Le Cuirot <chewi@aura-online.co.uk> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
Before kernel 2.6.14, the driver checked for status before stopping the thread. So, a compatibility test did exist. After 2.6.14, the if (state) were replaced by: if (1) However, it makes no sense to keep the if(1). Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
Some includes were added after some non-include macros, on old drivers. Better to keep all includes at the beginning of the files. This change also helps to make backports to properly work at the development tree. Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Jean Delvare 提交于
Clean up the use of structure templates in cx88-i2c and cx88-vp3054-i2c. For one thing, a real template is supposed to be read-only. And in some cases it's more efficient to initialize the few fields we need individually. This clean-up shrinks cx88-i2c.o by 33% and cx88-vp3054-i2c.o by 49% (x86_64). Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Adrian Bunk 提交于
Now that it's static, it should no longer be exported to modules... Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Adrian Bunk 提交于
The following doesn't make much sense: drivers/media/video/Kconfig: ... config TUNER_TEA5761 tristate "TEA 5761 radio tuner (EXPERIMENTAL)" ... drivers/media/video/Makefile: ... ifneq ($(CONFIG_TUNER_TEA5761),) tuner-objs += tea5761.o endif ... With this setup, TUNER_TEA5761=m is equivalent to TUNER_TEA5761=y. This patch therefore changes TUNER_TEA5761 to a bool. The missing dependency on EXPERIMENTAL the prompt text indicates also gets added by this patch. Additionally, the Makefile entry can now be written in a more compact way. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Matthias Kaehlcke 提交于
The Virtual Video driver uses a semaphore as mutex. Use the mutex API instead of the (binary) semaphore. Signed-off-by: NMatthias Kaehlcke <matthias.kaehlcke@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Matthias Kaehlcke 提交于
The Philips webcam driver uses a semaphore as mutex. Use the mutex API instead of the (binary) semaphore. -- Signed-off-by: NMatthias Kaehlcke <matthias.kaehlcke@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Trent Piepho 提交于
Adds the advanced debugging register read/write ioctl support to the bttv driver. Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Trent Piepho 提交于
For svhs, tuner, and tuner_type, be consistent in using UNSET instead of -1. For tuner_type also consistently use the existing constants: 0 => TUNER_TEMIC_PAL 1 => TUNER_PHILIPS_PAL_I 2 => TUNER_PHILIPS_NTSC 4 => TUNER_ABSENT 5 => TUNER_PHILIPS_PAL 21 => TUNER_TEMIC_4039FR5_NTSC 25 => TUNER_LG_PAL_I_FM Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Trent Piepho 提交于
The bttv driver has code to detect if a tda9887 is present, that was previous used to auto-load the tda9887 driver. Now there is no tda9887 driver, so the code is pointless; it just figures out if it should load the driver and then does nothing. For cards that are defined as having no tuner, the init code would still do i2c probes for various tuner devices and auto-load the tuner module. That can be skipped for cards that don't need it. The code is made to understand that in addition to 'UNSET', 'TUNER_ABSENT' also means no tuner. The tuner into printk()s are also made nicer. Levels are added, INFO or WARNING, depending on the meaning. For cards with no tuner, or no tuner defined, a more informative message is printed. Card has no tuner, before patch: bttv0: tuner type=-1 or bttv0: tuner type=4 After patch: bttv0: tuner absent Card has a tuner, but the type isn't defined, before patch: bttv0: tuner type=-1 After patch: bttv0: tuner type unset [<- also warning now, as the tuner won't work right] Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
add analog video support for DViCO FusionHDTV 2 Thanks to Todd Ignasiak for donating the card. Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
The old description was "Philips 1236D ATSC/NTSC dual in", which can be confused with other Philips tuner models. This patch corrects the name to "Philips FCV1236D ATSC/NTSC dual in", and updates the range and params array names to match the description. Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
- Remove hardcoded fcv1236d tuner programmming from or51211.c - Alter dvb-bt8xx for the pcHDTV-2000 to use dvb-pll for fcv1236d support. Thanks to Jarom Hatch <jshatch@gmail.com> for testing this change. Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
This patch adds support to the dvb-pll library for the Philips fcv1236d tuner, based on the FCV1236D datasheet. Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Marco Gittler 提交于
The dvb_usb_device* d is not used anymore and can be removed. Signed-off-by: NMarco Gittler <g.marco@freenet.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
Move internal structures and debug macros to drivers/media/video/tuner-driver.h Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Antoine Jacquet 提交于
Add Trust Powerc@m 970Z (0x06d6:0x003b) to the list of supported devices. Signed-off-by: NAntoine Jacquet <royale@zerezo.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
Potentially, all board types with I2C and IR support can use an i2c based IR. Currently, the driver is selected only if bt848 or saa7134 boards are selected. Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
In the function, cx88_ir_handle_key: - convert nested if statement to a switch..case block Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Edgar Pisani 提交于
Signed-off-by: NEdgar Pisani <episani@onqweb.com.au> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Jan Frey 提交于
- add support for the I2C based IR transceiver of the Hauppauge HVR-1300 - remove bad code from cx88-input.c Signed-off-by: NJan Frey <jfrey@gmx.de> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Wade Berrier 提交于
Fix support for 3dfx Voodoo TV 200 variant Signed-off-by: NWade Berrier <wberrier@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
We must set i2c_msg.addr in order for the autodetection test to succeed! Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
Closes the issue opened on Kernel bugzilla: http://bugzilla.kernel.org/show_bug.cgi?id=8383 There's no need to print timeout without debug turned on: Apr 27 23:02:14 video kernel: cx88[1]/2-mpeg: cx8802_timeout Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
This patch removes all static dependencies on the dvb-pll module. All exported dvb_pll_desc's have been UNexported, and the caller will reference the individual dvb_pll_desc by it's index in the pll_list array. Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org> Signed-off-by: NPatrick Boettcher <pb@linuxtv.org> Acked-by: NOliver Endriss <o.endriss@gmx.de> Acked-by: NManu Abraham <manu@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
'tuner_pass_ctrl' functionality of the dib3000-mb devices was broken in the previous changeset: "dibusb-mb: convert pll handling to properly use dvb-pll" This patch fixes this problem by assigning this functionality to the i2c_gate_ctrl callback Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NPatrick Boettcher <pb@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
These two functions are no longer being used: dvb_usb_tuner_init_i2c dvb_usb_tuner_set_params_i2c This functionality has been taken over by dvb-pll Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NPatrick Boettcher <pb@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Trent Piepho 提交于
The last user of dvb_pll_configure was the dvb-usb function dvb_usb_tuner_calc_regs(), which was nothing more than a wrapper around dvb_pll_configure(). It's just a copy of the functionality provided by the tuner_ops calc_regs method, and can be deleted. There were two users of dvb_usb_tuner_calc_regs(). One was dvb_usb_tuner_set_params_i2c(), which is converted to use fe->ops.tuner_ops.calc_regs(). The other was the digitv driver. This driver can use one of two demods, mt352 or nxt6000. For the mt352, the driver would set tuner_ops.calc_regs to dvb_usb_tuner_calc_regs(). We can just attach dvb_pll and use the tuner_ops.calc_regs() provided by that module. For the nxt600, the driver would set tuner_ops.set_params to digitv_nxt6000_tuner_set_params. That function would in turn use dvb_usb_tuner_calc_regs(). We convert it to use tuner_ops.calc_regs() instead, and use dvb_pll_attach. The digitv_tuner_attach() needs to know which frontend was attached by digitv_frontend_attach(), since the nxt6000 needs tuner_ops.set_params() to be overridden with digitv_nxt6000_tuner_set_params(). So, to do this a digitv_state that says which frontend was used is added to the dvb_usb_device private state field. Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Rafael Bilski 提交于
With previous patch card is generating MPEG audio stream too. Unfortunatly I2S audio output is muted. Unmute it. Signed-off-by: NRafal Bilski <rafalbilski@interia.pl> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Rafał Bilski 提交于
Sound recording doesn't work for this card because ACNI and ACPF are not set before snd_card_saa7134_capture_prepare(). As a result timeout occurs. These registers aren't poked because thread never gets wake up signal. ACNI initialization is done in the thread. Sound is muted when capture stops. Shouldn't be because it may be used during TV playback. Signed-off-by: NRafal Bilski <rafalbilski@interia.pl> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
The following two pointers in struct cx8802_dev are unused - remove them: void* fe_handle; int (*fe_release)(void *handle); Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
Get_dvb_firmware: update script for new location of sp8870 firmware This url is no longer valid: http://www.technotrend.de/new/217g/tt_Premium_217g.zip Replace with: http://www.softwarepatch.pl/9999ccd06a4813cb827dbb0005071c71/tt_Premium_217g.zip Thanks-to: Tobias Stoeber <tobi@to-st.de> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hans Verkuil 提交于
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hans Verkuil 提交于
The old service_set_out setting was still tested, even though it no longer was ever set and was in fact obsolete. This meant that everything that was written to /dev/vbi16 was ignored. Removed the service_set_out variable altogether and now it works again. Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-