- 18 4月, 2008 40 次提交
-
-
由 Tao Ma 提交于
In some cases(Inode stealing from other nodes), we may not want ocfs2_reserve_suballoc_bits to allocate new groups from the global_bitmap since it may already be full. So add a new parameter for this. Signed-off-by: NTao Ma <tao.ma@oracle.com> Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com> Signed-off-by: NMark Fasheh <mfasheh@suse.com>
-
由 Tao Ma 提交于
In ocfs2_figure_merge_contig_type, we judge whether there exists a cross extent block merge and enable it by setting CONTIG_LEFT and CONTIG_RIGHT accordingly. Signed-off-by: NTao Ma <tao.ma@oracle.com> Signed-off-by: NMark Fasheh <mfasheh@suse.com>
-
由 Tao Ma 提交于
In ocfs2_merge_rec_left, when we find the merge extent is "CONTIG_RIGHT" with the first extent record of the next extent block, we will merge it to the next extent block and change all the related extent blocks accordingly. In ocfs2_merge_rec_right, when we find the merge extent is "CONTIG_LEFT" with the last extent record of the previous extent block, we will merge it to the prevoius extent block and change all the related extent blocks accordingly. As for CONTIG_LEFTRIGHT, we will handle CONTIG_RIGHT first so that when the index is zero, the merge process will be more efficient and easier. Signed-off-by: NTao Ma <tao.ma@oracle.com> Signed-off-by: NMark Fasheh <mfasheh@suse.com>
-
由 Mark Fasheh 提交于
/sys/fs is where we really want file system specific sysfs objects. Ocfs2-tools has been updated to look in /sys/fs/o2cb. We can maintain backwards compatibility with old ocfs2-tools by using a sysfs symlink. After some time (2 years), the symlink can be safely removed. This patch also adds documentation to make it easier for people to figure out what /sys/fs/o2cb is used for. Signed-off-by: NMark Fasheh <mfasheh@suse.com>
-
由 Mark Fasheh 提交于
Allow callers of sysfs_remove_link() to pass a NULL kobj, in which case sysfs_root will be used as the parent directory. This allows us to tear down top level symlinks created via sysfs_create_link(), which already has similar handling of a NULL parent object. Signed-off-by: NMark Fasheh <mfasheh@suse.com> Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Tao Ma 提交于
Currently, o2net connects to a node on hb_up and disconnects on hb_down and net timeout. It disconnects on net timeout is ok, but it should attempt to reconnect back. This is because sometimes nodes get overloaded enough that the network connection breaks but the disk hb does not. And if we get into that situation, we either fence (unnecessarily) or wait for its disk hb to die (and sometimes hang in the process). So in this updated scheme, when the network disconnects, we keep attempting to reconnect till we succeed or we get a disk hb down event. If the other node is really dead, then we will eventually get a node down event. If not, we should be able to connect again and continue. Signed-off-by: NTao Ma <tao.ma@oracle.com> Signed-off-by: NMark Fasheh <mfasheh@suse.com>
-
由 Sunil Mushran 提交于
A previous patch added KERN_NOTICE to printks printing the lockres that cluttered the output. This patch removes the log level. For people concerned with syslog clutter, please note we now use this facility to print lockres only during an error. Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com> Signed-off-by: NMark Fasheh <mfasheh@suse.com>
-
由 Sunil Mushran 提交于
__dlm_print_one_lock_resource was printing lockname incorrectly. Also, we now use printk directly instead of mlog as the latter prints the line context which is not useful for this print. Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com> Signed-off-by: NJoel Becker <joel.becker@oracle.com> Signed-off-by: NMark Fasheh <mfasheh@suse.com>
-
由 Sunil Mushran 提交于
This patch helps in consolidating debugging related functions in dlmdebug.c. Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com> Signed-off-by: NJoel Becker <joel.becker@oracle.com> Signed-off-by: NMark Fasheh <mfasheh@suse.com>
-
由 Sunil Mushran 提交于
This patch dumps all the lockres' on the purgelist it can fit in one page into a debugfs file. Useful for debugging. Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com> Signed-off-by: NJoel Becker <joel.becker@oracle.com> Signed-off-by: NMark Fasheh <mfasheh@suse.com>
-
由 Sunil Mushran 提交于
This patch dumps all mles it can fit in one page into a debugfs file. Useful for debugging. Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com> Signed-off-by: NJoel Becker <joel.becker@oracle.com> Signed-off-by: NMark Fasheh <mfasheh@suse.com>
-
由 Sunil Mushran 提交于
This patch moves some mle related definitions from dlmmaster.c to dlmcommon.h. Future patches need these definitions to dump mle debugging information. Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Joel Becker <joel.beckeroracle.com> Signed-off-by: NMark Fasheh <mfasheh@suse.com>
-
由 Sunil Mushran 提交于
This patch dumps all the lockres' alongwith all the locks into a debugfs file. Useful for debugging. Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com> Signed-off-by: NJoel Becker <joel.becker@oracle.com> Signed-off-by: NMark Fasheh <mfasheh@suse.com>
-
由 Sunil Mushran 提交于
This patch dumps the dlm state (dlm_ctxt) into a debugfs file. Useful for debugging. Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com> Signed-off-by: NJoel Becker <joel.becker@oracle.com> Signed-off-by: NMark Fasheh <mfasheh@suse.com>
-
由 Sunil Mushran 提交于
This patch creates the debugfs directories that will hold the files to be used to dump the dlm state. Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com> Signed-off-by: NJoel Becker <joel.becker@oracle.com> Signed-off-by: NMark Fasheh <mfasheh@suse.com>
-
由 Sunil Mushran 提交于
This patch links all the lockres' to a tracking list in dlm_ctxt. We will use this in an upcoming patch that will walk the entire list and to dump the lockres states to a debugfs file. Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com> Signed-off-by: NJoel Becker <joel.becker@oracle.com> Signed-off-by: NMark Fasheh <mfasheh@suse.com>
-
由 Sunil Mushran 提交于
This patch makes the o2dlm allocate memory for lockres, lockname and lock structures from slabcaches rather than kmalloc. This allows us to not only make these allocs more efficient but also allows us to track the memory being consumed by these structures. Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com> Signed-off-by: NJoel Becker <joel.becker@oracle.com> Signed-off-by: NMark Fasheh <mfasheh@suse.com>
-
由 Sunil Mushran 提交于
This patch renames dlm_mle_slabcache to prevent namespace clashes with fs/dlm. Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com> Signed-off-by: NJoel Becker <joel.becker@oracle.com> Signed-off-by: NMark Fasheh <mfasheh@suse.com>
-
由 Joel Becker 提交于
Add ABI documentation for these files: /sys/fs/ocfs2/max_locking_protocol /sys/fs/ocfs2/loaded_cluster_plugins /sys/fs/ocfs2/active_cluster_plugin /sys/fs/ocfs2/cluster_stack Signed-off-by: NJoel Becker <joel.becker@oracle.com> Signed-off-by: NMark Fasheh <mfasheh@suse.com>
-
由 Joel Becker 提交于
ocfs2 now supports plug-ins for the classic O2CB stack as well as userspace cluster stacks in conjunction with fs/dlm. This allows zero, one, or both of the plug-ins to be selected in Kconfig. For local mounts (non-clustered), neither plug-in is needed. Both plugins can be loaded at one time, the runtime will select the one needed for the cluster systme in use. Signed-off-by: NJoel Becker <joel.becker@oracle.com> Signed-off-by: NMark Fasheh <mfasheh@suse.com>
-
由 Joel Becker 提交于
Add ocfs2_stack_user.ko to the Makefile so that it builds. Signed-off-by: NJoel Becker <joel.becker@oracle.com> Signed-off-by: NMark Fasheh <mfasheh@suse.com>
-
由 Joel Becker 提交于
The masklog code is in the o2cb stack, but ocfs2_lockid.h now needs to be included by the user stack. The BUG() in ocfs2_lock_type_string() does not need masklog support, so change it to a regular BUG_ON(). Signed-off-by: NJoel Becker <joel.becker@oracle.com> Signed-off-by: NMark Fasheh <mfasheh@suse.com>
-
由 David Teigland 提交于
Add code to use fs/dlm. [ Modified to be part of the stack_user module -- Joel ] Signed-off-by: NDavid Teigland <teigland@redhat.com> Signed-off-by: NJoel Becker <joel.becker@oracle.com> Signed-off-by: NMark Fasheh <mfasheh@suse.com>
-
由 Joel Becker 提交于
The "SETV" message sets the filesystem locking protocol version as negotiated by the client. The client negotiates based on the maximum version advertised in /sys/fs/ocfs2/max_locking_protocol. Signed-off-by: NJoel Becker <joel.becker@oracle.com> Signed-off-by: NMark Fasheh <mfasheh@suse.com>
-
由 Joel Becker 提交于
This is the second part of the ocfs2_control handshake. After negotiating the ocfs2_control protocol, the daemon tells the filesystem what the local node id is via the SETN message. Signed-off-by: NJoel Becker <joel.becker@oracle.com> Signed-off-by: NMark Fasheh <mfasheh@suse.com>
-
由 Joel Becker 提交于
When the control daemon sees a node go down, it sends a DOWN message through the ocfs2_control device. Signed-off-by: NJoel Becker <joel.becker@oracle.com> Signed-off-by: NMark Fasheh <mfasheh@suse.com>
-
由 Joel Becker 提交于
When a control daemon opens the ocfs2_control device, it must perform a handshake to tell the filesystem it is something capable of monitoring cluster status. Only after the handshake is complete will the filesystem allow mounts. This is the first part of the handshake. The daemon reads all supported ocfs2_control protocols, then writes in the protocol it will use. Signed-off-by: NJoel Becker <joel.becker@oracle.com> Signed-off-by: NMark Fasheh <mfasheh@suse.com>
-
由 Joel Becker 提交于
The ocfs2_control misc device is how a userspace control daemon (controld) talks to the filesystem. Introduce the bare-bones filesystem ops. Signed-off-by: NJoel Becker <joel.becker@oracle.com> Signed-off-by: NMark Fasheh <mfasheh@suse.com>
-
由 Joel Becker 提交于
Add a skeleton for the stack_user module. It's just the barebones module code. Signed-off-by: NJoel Becker <joel.becker@oracle.com> Signed-off-by: NMark Fasheh <mfasheh@suse.com>
-
由 Joel Becker 提交于
Userspace can now query and specify the cluster stack in use via the /sys/fs/ocfs2/cluster_stack file. By default, it is 'o2cb', which is the classic stack. Thus, old tools that do not know how to modify this file will work just fine. The stack cannot be modified if there is a live filesystem. ocfs2_cluster_connect() now takes the expected cluster stack as an argument. This way, the filesystem and the stack glue ensure they are speaking to the same backend. If the stack is 'o2cb', the o2cb stack plugin is used. For any other value, the fsdlm stack plugin is selected. Signed-off-by: NJoel Becker <joel.becker@oracle.com> Signed-off-by: NMark Fasheh <mfasheh@suse.com>
-
由 Joel Becker 提交于
The filesystem gains the USERSPACE_STACK incomat bit and the s_cluster_info field on the superblock. When a userspace stack is in use, the name of the stack is stored on-disk for mount-time verification. The "cluster_stack" option is added to mount(2) processing. The mount process needs to pass the matching stack name. If the passed name and the on-disk name do not match, the mount is failed. When using the classic o2cb stack, the incompat bit is *not* set and no mount option is used other than the usual heartbeat=local. Thus, the filesystem is compatible with older tools. Signed-off-by: NJoel Becker <joel.becker@oracle.com> Signed-off-by: NMark Fasheh <mfasheh@suse.com>
-
由 Joel Becker 提交于
Introduce a set of sysfs files that describe the current stack glue state. The files live under /sys/fs/ocfs2. The locking_protocol file displays the version of ocfs2's locking code. The loaded_cluster_plugins file displays all of the currently loaded stack plugins. When filesystems are mounted, the active_cluster_plugin file will display the plugin in use. Signed-off-by: NJoel Becker <joel.becker@oracle.com> Signed-off-by: NMark Fasheh <mfasheh@suse.com>
-
由 Joel Becker 提交于
We define the ocfs2_stack_plugin structure to represent a stack driver. The o2cb stack code is split into stack_o2cb.c. This becomes the ocfs2_stack_o2cb.ko module. The stackglue generic functions are similarly split into the ocfs2_stackglue.ko module. This module now provides an interface to register drivers. The ocfs2_stack_o2cb driver registers itself. As part of this interface, ocfs2_stackglue can load drivers on demand. This is accomplished in ocfs2_cluster_connect(). ocfs2_cluster_disconnect() is now notified when a _hangup() is pending. If a hangup is pending, it will not release the driver module and will let _hangup() do that. Signed-off-by: NJoel Becker <joel.becker@oracle.com>
-
由 Joel Becker 提交于
Define the ocfs2_stack_operations structure. Build o2cb_stack_ops from all of the o2cb-specific stack functions. Change the generic stack glue functions to call the stack_ops instead of the o2cb functions directly. The o2cb functions are moved to stack_o2cb.c. The headers are cleaned up to where only needed headers are included. In this code, stackglue.c and stack_o2cb.c refer to some shared extern variables. When they become modules, that will change. Signed-off-by: NJoel Becker <joel.becker@oracle.com> Signed-off-by: NMark Fasheh <mfasheh@suse.com>
-
由 Joel Becker 提交于
Split off the o2cb-specific funtionality from the generic stack glue calls. This is a precurser to wrapping the o2cb functionality in an operations vector. Signed-off-by: NJoel Becker <joel.becker@oracle.com> Signed-off-by: NMark Fasheh <mfasheh@suse.com>
-
由 Joel Becker 提交于
The stack glue initialization function needs a better name so that it can be used cleanly when stackglue becomes a module. Signed-off-by: NJoel Becker <joel.becker@oracle.com> Signed-off-by: NMark Fasheh <mfasheh@suse.com>
-
由 Joel Becker 提交于
dlmglue.c was still referencing a raw o2dlm lksb in one instance. Let's create a generic ocfs2_dlm_dump_lksb() function. This allows underlying DLMs to print whatever they want about their lock. We then move the o2dlm dump into stackglue.c where it belongs. Signed-off-by: NJoel Becker <joel.becker@oracle.com> Signed-off-by: NMark Fasheh <mfasheh@suse.com>
-
由 David Teigland 提交于
When using fsdlm, -EAGAIN is returned in the async callback for NOQUEUE requests. Fix up dlmglue to expect this. Signed-off-by: NDavid Teigland <teigland@redhat.com> Signed-off-by: NJoel Becker <joel.becker@oracle.com> Signed-off-by: NMark Fasheh <mfasheh@suse.com>
-
由 Joel Becker 提交于
o2dlm has the non-standard behavior of providing a cancel callback (unlock_ast) even when the cancel has failed (the locking operation succeeded without canceling). This is called CANCELGRANT after the status code sent to the callback. fs/dlm does not provide this callback, so dlmglue must be changed to live without it. o2dlm_unlock_ast_wrapper() in stackglue now ignores CANCELGRANT calls. Because dlmglue no longer sees CANCELGRANT, ocfs2_unlock_ast() no longer needs to check for it. ocfs2_locking_ast() must catch that a cancel was tried and clear the cancel state. Making these changes opens up a locking race. dlmglue uses the the OCFS2_LOCK_BUSY flag to ensure only one thread is calling the dlm at any one time. But dlmglue must unlock the lockres before calling into the dlm. In the small window of time between unlocking the lockres and calling the dlm, the downconvert thread can try to cancel the lock. The downconvert thread is checking the OCFS2_LOCK_BUSY flag - it doesn't know that ocfs2_dlm_lock() has not yet been called. Because ocfs2_dlm_lock() has not yet been called, the cancel operation will just be a no-op. There's nothing to cancel. With CANCELGRANT, dlmglue uses the CANCELGRANT callback to clear up the cancel state. When it comes around again, it will retry the cancel. Eventually, the first thread will have called into ocfs2_dlm_lock(), and either the lock or the cancel will succeed. The downconvert thread can then do its downconvert. Without CANCELGRANT, there is nothing to clean up the cancellation state. The downconvert thread does not know to retry its operations. More importantly, the original lock may be blocking on the other node that is trying to cancel us. With neither able to make progress, the ast is never called and the cancellation state is never cleaned up that way. dlmglue is deadlocked. The OCFS2_LOCK_PENDING flag is introduced to remedy this window. It is set at the same time OCFS2_LOCK_BUSY is. Thus, the downconvert thread can check whether the lock is cancelable. If not, it just loops around to try again. Once ocfs2_dlm_lock() is called, the thread then clears OCFS2_LOCK_PENDING and wakes the downconvert thread. Now, if the downconvert thread finds the lock BUSY, it can safely try to cancel it. Whether the cancel works or not, the state will be properly set and the lock processing can continue. Signed-off-by: NJoel Becker <joel.becker@oracle.com> Signed-off-by: NMark Fasheh <mfasheh@suse.com>
-
由 Mark Fasheh 提交于
It doesn't make sense to query for a node number before connecting to the cluster stack. This should be safe to do because node_num is only just printed, and we're actually only moving the setting of node num a small amount further in the mount process. [ Disconnect when node query fails -- Joel ] Reviewed-by: NJoel Becker <joel.becker@oracle.com> Signed-off-by: NMark Fasheh <mfasheh@suse.com>
-