- 17 1月, 2018 11 次提交
-
-
由 Kim Phillips 提交于
'perf record' and 'perf report --dump-raw-trace' supported in this release. Example usage: # perf record -e arm_spe/ts_enable=1,pa_enable=1/ dd if=/dev/zero of=/dev/null count=10000 # perf report --dump-raw-trace Note that the perf.data file is portable, so the report can be run on another architecture host if necessary. Output will contain raw SPE data and its textual representation, such as: 0x5c8 [0x30]: PERF_RECORD_AUXTRACE size: 0x200000 offset: 0 ref: 0x1891ad0e idx: 1 tid: 2227 cpu: 1 . . ... ARM SPE data: size 2097152 bytes . 00000000: 49 00 LD . 00000002: b2 c0 3b 29 0f 00 00 ff ff VA 0xffff00000f293bc0 . 0000000b: b3 c0 eb 24 fb 00 00 00 80 PA 0xfb24ebc0 ns=1 . 00000014: 9a 00 00 LAT 0 XLAT . 00000017: 42 16 EV RETIRED L1D-ACCESS TLB-ACCESS . 00000019: b0 00 c4 15 08 00 00 ff ff PC 0xff00000815c400 el3 ns=1 . 00000022: 98 00 00 LAT 0 TOT . 00000025: 71 36 6c 21 2c 09 00 00 00 TS 39395093558 . 0000002e: 49 00 LD . 00000030: b2 80 3c 29 0f 00 00 ff ff VA 0xffff00000f293c80 . 00000039: b3 80 ec 24 fb 00 00 00 80 PA 0xfb24ec80 ns=1 . 00000042: 9a 00 00 LAT 0 XLAT . 00000045: 42 16 EV RETIRED L1D-ACCESS TLB-ACCESS . 00000047: b0 f4 11 16 08 00 00 ff ff PC 0xff0000081611f4 el3 ns=1 . 00000050: 98 00 00 LAT 0 TOT . 00000053: 71 36 6c 21 2c 09 00 00 00 TS 39395093558 . 0000005c: 48 00 INSN-OTHER . 0000005e: 42 02 EV RETIRED . 00000060: b0 2c ef 7f 08 00 00 ff ff PC 0xff0000087fef2c el3 ns=1 . 00000069: 98 00 00 LAT 0 TOT . 0000006c: 71 d1 6f 21 2c 09 00 00 00 TS 39395094481 ... Other release notes: - applies to acme's perf/{core,urgent} branches, likely elsewhere - Report is self-contained within the tool. Record requires enabling the kernel SPE driver by setting CONFIG_ARM_SPE_PMU. - The intel-bts implementation was used as a starting point; its min/default/max buffer sizes and power of 2 pages granularity need to be revisited for ARM SPE - Recording across multiple SPE clusters/domains not supported - Snapshot support (record -S), and conversion to native perf events (e.g., via 'perf inject --itrace'), are also not supported - Technically both cs-etm and spe can be used simultaneously, however disabled for simplicity in this release Signed-off-by: NKim Phillips <kim.phillips@arm.com> Reviewed-by: NDongjiu Geng <gengdongjiu@huawei.com> Acked-by: NAdrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rob Herring <robh@kernel.org> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wang Nan <wangnan0@huawei.com> Cc: Will Deacon <will.deacon@arm.com> Link: http://lkml.kernel.org/r/20180114132850.0b127434b704a26bad13268f@arm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Steven Rostedt (VMware) 提交于
If a field is a dynamic string, get_field_str() returned just the offset/size value and not the string. Have it parse the offset/size correctly to return the actual string. Otherwise filtering fails when trying to filter fields that are dynamic strings. Reported-by: NGopanapalli Pradeep <prap_hai@yahoo.com> Signed-off-by: NSteven Rostedt <rostedt@goodmis.org> Acked-by: NNamhyung Kim <namhyung@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/20180112004823.146333275@goodmis.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Taeung Song 提交于
Currently the FILTER_TRIVIAL_FALSE case has a missing break statement, if the trivial type is FALSE, it will also run into the TRUE case, and always be skipped as the TRUE statement will continue the loop on the inverse condition of the FALSE statement. Reported-by: NNamhyung Kim <namhyung@kernel.org> Acked-by: NNamhyung Kim <namhyung@kernel.org> Signed-off-by: NTaeung Song <treeze.taeung@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/20180112004823.012918807@goodmis.org Link: http://lkml.kernel.org/r/1493218540-12296-1-git-send-email-treeze.taeung@gmail.comSigned-off-by: NSteven Rostedt <rostedt@goodmis.org> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Michael Sartain 提交于
Add UL suffix to MISSING_EVENTS since ints shouldn't be left shifted by 31. Signed-off-by: NMichael Sartain <mikesart@fastmail.com> Acked-by: NNamhyung Kim <namhyung@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/20171016165542.13038-4-mikesart@fastmail.com Link: http://lkml.kernel.org/r/20180112004822.829533885@goodmis.orgSigned-off-by: NSteven Rostedt <rostedt@goodmis.org> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Federico Vaga 提交于
It makes the code clearer and less error prone. clearer: - less code - the code is now using the same format to create strings dynamically less error prone: - no magic number +2 +9 +5 to compute the size - no copy&paste of the strings to compute the size and to concatenate The function `asprintf` is not POSIX standard but the program was already using it. Later it can be decided to use only POSIX functions, then we can easly replace all the `asprintf(3)` with a local implementation of that function. Signed-off-by: NFederico Vaga <federico.vaga@vaga.pv.it> Acked-by: NNamhyung Kim <namhyung@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Federico Vaga <federico.vaga@vaga.pv.it> Link: http://lkml.kernel.org/r/20170802221558.9684-2-federico.vaga@vaga.pv.it Link: http://lkml.kernel.org/r/20180112004822.686281649@goodmis.orgSigned-off-by: NSteven Rostedt <rostedt@goodmis.org> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Steven Rostedt (VMware) 提交于
When a record has an unrecognized type, an error message is reported, but it would also be helpful to see the contents of that record. At least show what it is in hex, instead of just showing a blank line. Signed-off-by: NSteven Rostedt <rostedt@goodmis.org> Acked-by: NNamhyung Kim <namhyung@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/20180112004822.542204577@goodmis.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Steven Rostedt (VMware) 提交于
The Linux kernel printf() has some extended use cases that dereference the pointer. This is dangerouse for tracing because the pointer that is dereferenced can change or even be unmapped. It also causes issues when the trace data is extracted, because user space does not have access to the contents of the pointer even if it still exists. To handle this, the kernel was updated to process these dereferenced pointers at the time they are recorded, and not post processed. Now they exist in the tracing buffer, and no dereference is needed at the time of reading the trace. The event parsing library needs to handle this new case. Signed-off-by: NSteven Rostedt <rostedt@goodmis.org> Acked-by: NNamhyung Kim <namhyung@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/20180112004822.403349289@goodmis.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Steven Rostedt (VMware) 提交于
When processing %pX in pretty_print(), simplify the logic slightly by incrementing the ptr to the format string if isalnum(ptr[1]) is true. This follows the logic a bit more closely to what is in the kernel. Also, this fixes a small bug where %pF was not giving the offset of the function. Signed-off-by: NSteven Rostedt <rostedt@goodmis.org> Acked-by: NNamhyung Kim <namhyung@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/20180112004822.260262257@goodmis.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jan Kiszka 提交于
Aligns trace-cmd with the behavior of the kernel. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Acked-by: NNamhyung Kim <namhyung@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/e60c889f-55e7-4ee8-0e50-151e435ffd8c@siemens.com Link: http://lkml.kernel.org/r/20180112004822.118332436@goodmis.orgSigned-off-by: NSteven Rostedt <rostedt@goodmis.org> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Steven Rostedt (VMware) 提交于
If the value contains bits that are not defined by print_flags() helper, then show the remaining bits. This aligns with the functionality of the kernel. Signed-off-by: NSteven Rostedt <rostedt@goodmis.org> Acked-by: NNamhyung Kim <namhyung@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/e60c889f-55e7-4ee8-0e50-151e435ffd8c@siemens.com Link: http://lkml.kernel.org/r/20180112004821.976225232@goodmis.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Michael Sartain 提交于
Older kernels have a bug that creates invalid symbols. event-parse.c handles them by replacing them with a "%s" token. But the fix included an extra backslash, and "\%s" was added incorrectly. Signed-off-by: NMichael Sartain <mikesart@fastmail.com> Acked-by: NNamhyung Kim <namhyung@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/20180112004821.827168881@goodmis.org Link: http://lkml.kernel.org/r/d320000d37c10ce0912851e1fb78d1e0c946bcd9.1497486273.git.mikesart@fastmail.comSigned-off-by: NSteven Rostedt <rostedt@goodmis.org> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 13 1月, 2018 4 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
The raw_syscalls:sys_{enter,exit} were first supported in 'perf trace', together with minor and major page faults, then we supported --call-graph, then --max-stack, but when the other tracepoints got supported, and bpf, etc, I forgot to make those global call-graph settings apply to them. Fix it by realizing that the global --max-stack and --call-graph settings are done via: OPT_CALLBACK(0, "call-graph", &trace.opts, "record_mode[,record_size]", record_callchain_help, &record_parse_callchain_opt), And then, when we go to parse the events in -e via: OPT_CALLBACK('e', "event", &trace, "event", "event/syscall selector. use 'perf list' to list available events", trace__parse_events_option), And trace__parse_sevents_option() calls: struct option o = OPT_CALLBACK('e', "event", &trace->evlist, "event", "event selector. use 'perf list' to list available events", parse_events_option); err = parse_events_option(&o, lists[0], 0); parse_events_option() will override the global --call-graph and --max-stack if the "call-graph" and/or "max-stack" terms are in the event definition, such as in the probe_libc:inet_pton event in one of the examples below (-e probe_libc:inet_pton/max-stack=2). Before: # perf trace --mmap 1024 --call-graph dwarf -e sendto,probe_libc:inet_pton ping -6 -c 1 ::1 1.525 ( ): probe_libc:inet_pton:(7f77f3ac9350)) PING ::1(::1) 56 data bytes 64 bytes from ::1: icmp_seq=1 ttl=64 time=0.071 ms --- ::1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.071/0.071/0.071/0.000 ms 1.677 ( 0.081 ms): ping/31296 sendto(fd: 3, buff: 0x55681b652720, len: 64, addr: 0x55681b650640, addr_len: 28) = 64 __libc_sendto (/usr/lib64/libc-2.26.so) [0xffffaa97e4bc9cef] (/usr/bin/ping) [0xffffaa97e4bc656d] (/usr/bin/ping) [0xffffaa97e4bc7d0a] (/usr/bin/ping) [0xffffaa97e4bca447] (/usr/bin/ping) [0xffffaa97e4bc2f91] (/usr/bin/ping) __libc_start_main (/usr/lib64/libc-2.26.so) [0xffffaa97e4bc3379] (/usr/bin/ping) # After: # perf trace --mmap 1024 --call-graph dwarf -e sendto,probe_libc:inet_pton ping -6 -c 1 ::1 PING ::1(::1) 56 data bytes 64 bytes from ::1: icmp_seq=1 ttl=64 time=0.089 ms --- ::1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.089/0.089/0.089/0.000 ms 1.955 ( ): probe_libc:inet_pton:(7f383a311350)) __inet_pton (inlined) gaih_inet.constprop.7 (/usr/lib64/libc-2.26.so) __GI_getaddrinfo (inlined) [0xffffaa5d91444f3f] (/usr/bin/ping) __libc_start_main (/usr/lib64/libc-2.26.so) [0xffffaa5d91445379] (/usr/bin/ping) 2.140 ( 0.101 ms): ping/32047 sendto(fd: 3, buff: 0x55a26edd0720, len: 64, addr: 0x55a26edce640, addr_len: 28) = 64 __libc_sendto (/usr/lib64/libc-2.26.so) [0xffffaa5d9144bcef] (/usr/bin/ping) [0xffffaa5d9144856d] (/usr/bin/ping) [0xffffaa5d91449d0a] (/usr/bin/ping) [0xffffaa5d9144c447] (/usr/bin/ping) [0xffffaa5d91444f91] (/usr/bin/ping) __libc_start_main (/usr/lib64/libc-2.26.so) [0xffffaa5d91445379] (/usr/bin/ping) # Same thing for --max-stack, the global one: # perf trace --max-stack 3 -e sendto,probe_libc:inet_pton ping -6 -c 1 ::1 PING ::1(::1) 56 data bytes 64 bytes from ::1: icmp_seq=1 ttl=64 time=0.097 ms --- ::1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.097/0.097/0.097/0.000 ms 1.577 ( ): probe_libc:inet_pton:(7f32f3957350)) __inet_pton (inlined) gaih_inet.constprop.7 (/usr/lib64/libc-2.26.so) __GI_getaddrinfo (inlined) 1.738 ( 0.108 ms): ping/32103 sendto(fd: 3, buff: 0x55c3132d7720, len: 64, addr: 0x55c3132d5640, addr_len: 28) = 64 __libc_sendto (/usr/lib64/libc-2.26.so) [0xffffaa3cecf44cef] (/usr/bin/ping) [0xffffaa3cecf4156d] (/usr/bin/ping) # And then setting up a global setting (dwarf, max-stack=4), that will affect the raw_syscall:sys_enter for the 'sendto' syscall and that will be overriden in the probe_libc:inet_pton call to just one entry. # perf trace --max-stack=4 --call-graph dwarf -e sendto -e probe_libc:inet_pton/max-stack=1/ ping -6 -c 1 ::1 PING ::1(::1) 56 data bytes 64 bytes from ::1: icmp_seq=1 ttl=64 time=0.090 ms --- ::1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.090/0.090/0.090/0.000 ms 2.140 ( ): probe_libc:inet_pton:(7f9fe9337350)) __GI___inet_pton (/usr/lib64/libc-2.26.so) 2.283 ( 0.103 ms): ping/31804 sendto(fd: 3, buff: 0x55c7f3e19720, len: 64, addr: 0x55c7f3e17640, addr_len: 28) = 64 __libc_sendto (/usr/lib64/libc-2.26.so) [0xffffaa380c402cef] (/usr/bin/ping) [0xffffaa380c3ff56d] (/usr/bin/ping) [0xffffaa380c400d0a] (/usr/bin/ping) # Install iputils-debuginfo to get those /usr/bin/ping addresses resolved, those routines are not on its .dymsym nor .symtab :-) Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Hendrick Brueckner <brueckner@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Thomas Richter <tmricht@linux.vnet.ibm.com> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-qgl2gse8elhh9zztw4ajopg3@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
The construct: if (callchain_param) perf_evsel__config_callchain(evsel, opts, &callchain_param); happens in several places, so make perf_evsel__config_callchain() work just like free(NULL), do nothing if param->enabled is not set. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Hendrick Brueckner <brueckner@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Thomas Richter <tmricht@linux.vnet.ibm.com> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-ykk0qzxnxwx3o611ctjnmxav@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jiri Olsa 提交于
We need to increase output offset in each iteration, not decrease it as we currently do. I guess we were lucky to finish in most cases in first iteration, so the bug never showed. However it shows a lot when working with big (~4GB) size data. Signed-off-by: NJiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Fixes: 9c9f5a2f ("perf tools: Introduce copyfile_offset() function") Link: http://lkml.kernel.org/r/20180109133923.25406-1-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
Since 75562573 ("perf tools: Add support for PERF_SAMPLE_IDENTIFIER") we don't need explicitely set PERF_SAMPLE_IDENTIFIER, as perf_evlist__config() will do this for us, i.e. when there are more than one evsel in an evlist, it will check if some evsel has a sample_type different than the one on the first evsel in the list, setting PERF_SAMPLE_IDENTIFIER in that case. So, to simplify 'perf trace' codebase, ditch that check. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Hendrick Brueckner <brueckner@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Thomas Richter <tmricht@linux.vnet.ibm.com> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-12xq6orhwttee2tdtu96ucrp@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 12 1月, 2018 2 次提交
-
-
由 Kan Liang 提交于
There could be different types of memory in the system. E.g normal System Memory, Persistent Memory. To understand how the workload maps to those memories, it's important to know the I/O statistics of them. Perf can collect physical addresses, but those are raw data. It still needs extra work to resolve the physical addresses. Provide a script to facilitate the physical addresses resolving and I/O statistics. Profile with MEM_INST_RETIRED.ALL_LOADS or MEM_UOPS_RETIRED.ALL_LOADS event if any of them is available. Look up the /proc/iomem and resolve the physical address. Provide memory type summary. Here is an example output: # perf script report mem-phys-addr Event: mem_inst_retired.all_loads:P Memory type count percentage ---------------------------------------- ----------- ----------- System RAM 74 53.2% Persistent Memory 55 39.6% N/A --- Changes since V2: - Apply the new license rules. - Add comments for globals Changes since V1: - Do not mix DLA and Load Latency. Do not compare the loads and stores. Only profile the loads. - Use event name to replace the RAW event Signed-off-by: NKan Liang <Kan.liang@intel.com> Reviewed-by: NAndi Kleen <ak@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Cc: Stephane Eranian <eranian@google.com> Link: https://lkml.kernel.org/r/1515099595-34770-1-git-send-email-kan.liang@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Luis de Bethencourt 提交于
The trailing semicolon is an empty statement that does no operation. Removing it since it doesn't do anything. Signed-off-by: NLuis de Bethencourt <luisbg@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180111155020.9782-1-luisbg@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 11 1月, 2018 2 次提交
-
-
由 Mathieu Poirier 提交于
Commit ("d0565132 perf evsel: Enable type checking for perf_evsel_config_term types") assumes PERF_EVSEL__CONFIG_TERM_DRV_CFG isn't used and as such adds a BUG_ON(). Since the enumeration type is used in macro ADD_CONFIG_TERM() the change break CoreSight trace acquisition. This patch restores the original code. Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org> Acked-by: NJiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Fixes: d0565132 ("perf evsel: Enable type checking for perf_evsel_config_term types") Link: http://lkml.kernel.org/r/1515617211-32024-1-git-send-email-mathieu.poirier@linaro.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Ingo Molnar 提交于
Merge tag 'perf-core-for-mingo-4.16-20180110' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: - The 'perf test bpf' entry hooked a eBPF proggie to the SyS_epoll_wait() kernel function and expected it to be hit when calling the epoll_wait() libc wrapper, which changed recently, in systems such as Fedora 27, with the glibc wrapper calling instead the epoll_pwait() syscall, so switch to epoll_pwait() for both the kernel and libc function, getting it to work both in old and new systems (Arnaldo Carvalho de Melo) - Beautify 'gettid' syscall result in 'perf trace', and in doing so noticed that we need to handle namespaces in 'perf trace', will be dealt with in follow up patches where we'll try to figure out if the recent support for namespace in tools/perf/ can be used for this purpose as well. (Arnaldo Carvalho de Melo) - Introduce 'perf report --mmaps' and 'perf report --tasks' to show info present in 'perf.data' (Jiri Olsa, Arnaldo Carvalho de Melo) - Synchronize kernel <-> tooling headers wrt meltdown/spectre changes (Arnaldo Carvalho de Melo) - Fix a wrong offset issue when using /proc/kcore (Jin Yao) - Fix bug that prevented annotating symbols in perf.data files generated with 'perf record --branch-any' (Jin Yao) - Add infrastructure to record first and last sample time to the perf.data file header, so that when processing all samples in a 'perf record' session, such as when doing build-id processing, or when specifically requesting that that info be recorded, use that in 'perf report --time', that also got support for percent slices in addition to absolute ones. I.e. now it is possible to ask for the samples in the 10%-20% time slice of a perf.data file (Jin Yao) - Enable building with libbabeltrace by default (Jiri Olsa) - Display perf_event_attr::namespaces when duping the attributes in verbose mode (Jiri Olsa) - Allocate context task_ctx_data for child event (Jiri Olsa) - Update comments for PERF_RECORD_ITRACE_START and PERF_RECORD_MISC_* (Jiri Olsa) - Add support for showing PERF_RECORD_LOST events in 'perf script' (Jiri Olsa) - Add 'perf report --stats' option to display quick statistics about metadata events (PERF_RECORD_*) i.e. what we get at the end of 'perf report -D' (Jiri Olsa) - Fix compile error with libunwind x86 (Wang Nan) Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
- 10 1月, 2018 7 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
Two kernel headers got modified recently due to meltdown/spectre, in: a89f040f ("x86/cpufeatures: Add X86_BUG_CPU_INSECURE") which are used by tooling as well: arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/disabled-features.h None of those changes have an effect on tooling, so do a plain copy. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-qqzcs8ri3vks8cypg0puk0ae@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
Similar to --tasks, producing the same output plus /proc/<PID>/maps similar lines for each mmap record present in a perf.data file. Please note that not all mmaps are stored, for instance, some of the non-executable mmaps are only stored when 'perf record --data' is used, when the user wants to resolve data accesses in addition to asking for executable mmaps to get the DSO with symtabs. E.g.: # perf record sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.018 MB perf.data (7 samples) ] [root@jouet ~]# perf report --mmaps # pid tid ppid comm 0 0 -1 |swapper 4137 4137 -1 |sleep 5628a35a1000-5628a37aa000 r-xp 00000000 3147148 /usr/bin/sleep 7fb65ad51000-7fb65b134000 r-xp 00000000 3149795 /usr/lib64/libc-2.26.so 7fb65b134000-7fb65b35e000 r-xp 00000000 3149715 /usr/lib64/ld-2.26.so 7ffd94b9f000-7ffd94ba1000 r-xp 00000000 0 [vdso] # # perf record sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.019 MB perf.data (8 samples) ] # perf report --mmaps # pid tid ppid comm 0 0 -1 |swapper 4161 4161 -1 |sleep 55afae69a000-55afae8a3000 r-xp 00000000 3147148 /usr/bin/sleep 7f569f00d000-7f569f3f0000 r-xp 00000000 3149795 /usr/lib64/libc-2.26.so 7f569f3f0000-7f569f61a000 r-xp 00000000 3149715 /usr/lib64/ld-2.26.so 7fff6fffe000-7fff70000000 r-xp 00000000 0 [vdso] # # perf record time sleep 1 0.00user 0.00system 0:01.00elapsed 0%CPU (0avgtext+0avgdata 2156maxresident)k 0inputs+0outputs (0major+73minor)pagefaults 0swaps [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.019 MB perf.data (14 samples) ] # perf report --mmaps # pid tid ppid comm 0 0 -1 |swapper 4281 4281 -1 |time 560560dca000-560560fcf000 r-xp 00000000 3190458 /usr/bin/time 7fc175196000-7fc175579000 r-xp 00000000 3149795 /usr/lib64/libc-2.26.so 7fc175579000-7fc1757a3000 r-xp 00000000 3149715 /usr/lib64/ld-2.26.so 7ffc924f6000-7ffc924f8000 r-xp 00000000 0 [vdso] 4282 4282 4281 | sleep 560560dca000-560560fcf000 r-xp 00000000 3190458 /usr/bin/time 564b4de3c000-564b4e045000 r-xp 00000000 3147148 /usr/bin/sleep 7f6a5a716000-7f6a5aaf9000 r-xp 00000000 3149795 /usr/lib64/libc-2.26.so 7f6a5aaf9000-7f6a5ad23000 r-xp 00000000 3149715 /usr/lib64/ld-2.26.so 7fc175196000-7fc175579000 r-xp 00000000 3149795 /usr/lib64/libc-2.26.so 7fc175579000-7fc1757a3000 r-xp 00000000 3149715 /usr/lib64/ld-2.26.so 7ffc924f6000-7ffc924f8000 r-xp 00000000 0 [vdso] 7ffcec7e6000-7ffcec7e8000 r-xp 00000000 0 [vdso] # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-zulwdlg5rfowogr1qznorvvc@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jiri Olsa 提交于
Add --tasks option to display monitored tasks stored in perf.data. Displaying pid/tid/ppid plus the command string aligned to distinguish parent and child tasks. $ perf record -a ... $ perf report --tasks # pid tid ppid comm 0 0 -1 |swapper 2 2 0 | kthreadd 14080 14080 2 | kworker/u17:1 4 4 2 | kworker/0:0H 6 6 2 | mm_percpu_wq ... 1 1 0 | systemd 23242 23242 1 | firefox 23242 23298 23242 | Cache2 I/O 23242 23304 23242 | GMPThread ... 1195 1195 1 | login 1611 1611 1195 | bash 1639 1639 1611 | startx 1663 1663 1639 | xinit 1673 1673 1663 | xmonad-x86_64-l 23939 23939 1673 | xterm 23941 23941 23939 | bash 23963 23963 23941 | mutt 24954 24954 23963 | offlineimap Signed-off-by: NJiri Olsa <jolsa@kernel.org> Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180107160356.28203-13-jolsa@kernel.org [ Make it --tasks, plural, --task works as well, as its unambiguous ] [ Use machine__find_thread(), not findnew(), as pointed out by Namhyung ] Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
Before: # trace -a -e gettid sleep 0.01 <SNIP> 4.863 ( 0.005 ms): Chrome_ChildIO/26241 gettid() = 26241 4.931 ( 0.004 ms): Chrome_IOThrea/26154 gettid() = 26154 4.942 ( 0.001 ms): Chrome_IOThrea/26154 gettid() = 26154 4.946 ( 0.001 ms): Chrome_IOThrea/26154 gettid() = 26154 4.970 ( 0.002 ms): Chrome_IOThrea/26154 gettid() = 26154 # After: # trace -a -e gettid sleep 0.01 0.000 ( 0.009 ms): Chrome_IOThrea/26154 gettid() = 26154 (Chrome_IOThread) <SNIP> 3.416 ( 0.002 ms): Chrome_ChildIO/26241 gettid() = 26241 (Chrome_ChildIOT) 3.424 ( 0.001 ms): Chrome_ChildIO/26241 gettid() = 26241 (Chrome_ChildIOT) 3.343 ( 0.002 ms): chrome/26116 gettid() = 26116 (chrome) 3.386 ( 0.002 ms): Chrome_IOThrea/26154 gettid() = 26154 (Chrome_IOThread) 4.003 ( 0.003 ms): Chrome_ChildIO/26241 gettid() = 26241 (Chrome_ChildIOT) 4.031 ( 0.002 ms): Chrome_IOThrea/26154 gettid() = 26154 (Chrome_IOThread) # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-kyg4gz2yy0vkrrh2vtq29u71@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jiri Olsa 提交于
Add --stats option to display quick data statistics of event numbers, without any further processing, like the one at the end of the perf report -D command. $ perf report --stat Aggregated stats: TOTAL events: 4566 MMAP events: 113 LOST events: 19 COMM events: 3 FORK events: 400 SAMPLE events: 3315 MMAP2 events: 32 FINISHED_ROUND events: 681 THREAD_MAP events: 1 CPU_MAP events: 1 TIME_CONV events: 1 I found this useful when hunting lost events for another change. Signed-off-by: NJiri Olsa <jolsa@kernel.org> Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180107160356.28203-12-jolsa@kernel.org [ Rename it to --stats, plural ] Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jiri Olsa 提交于
I want to display the pure events status coming in the next patch and the tool's warnings are superfluous in the output. Making it optional, enabled by default. Signed-off-by: NJiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180107160356.28203-11-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jiri Olsa 提交于
Adding option to display lost events: $ perf script --show-lost-events ... mplayer 13810 [002] 468011.402396: 100 cycles:ppp: ff.. mplayer 13810 [002] 468011.402396: PERF_RECORD_LOST lost 3880 mplayer 13810 [002] 468011.402397: 100 cycles:ppp: ff.. Signed-off-by: NJiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180107160356.28203-10-jolsa@kernel.org [ Use PRIu64 when printing u64 values, fixing the build in some arches ] Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 08 1月, 2018 14 次提交
-
-
由 Jiri Olsa 提交于
Adding support to display sample misc field in form of letter for each bit: # perf script -F +misc ... sched-messaging 1414 K 28690.636582: 4590 cycles ... sched-messaging 1407 U 28690.636600: 325620 cycles ... sched-messaging 1414 K 28690.636608: 19473 cycles ... misc field __________/ The misc bits are assigned to following letters: PERF_RECORD_MISC_KERNEL K PERF_RECORD_MISC_USER U PERF_RECORD_MISC_HYPERVISOR H PERF_RECORD_MISC_GUEST_KERNEL G PERF_RECORD_MISC_GUEST_USER g PERF_RECORD_MISC_MMAP_DATA* M PERF_RECORD_MISC_COMM_EXEC E PERF_RECORD_MISC_SWITCH_OUT S Signed-off-by: NJiri Olsa <jolsa@kernel.org> Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180107160356.28203-9-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jiri Olsa 提交于
The perf_event_header::misc bit 13 is shared on different events and next patch is adding yet another bit 13 user. Updating the comment to make it more structured and clear which events use bit 13. Suggested-by: NPeter Zijlstra <peterz@infradead.org> Signed-off-by: NJiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/20180107160356.28203-8-jolsa@kernel.org [ Update the tools/include/uapi/linux copy ] Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jiri Olsa 提交于
It simplifies the code a bit, because we dump the callchain Link: http://lkml.kernel.org/n/tip-uqp7qd6aif47g39glnbu95yl@git.kernel.org even if it's empty. With 'empty' callchain we can remove all the NULL-checking code paths. Original-patch-from: Peter Zijlstra <peterz@infradead.org> Signed-off-by: NJiri Olsa <jolsa@kernel.org> Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/20180107160356.28203-7-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jiri Olsa 提交于
And move it to core.c, because there's no caller of this function other than the one in core.c Signed-off-by: NJiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180107160356.28203-6-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jiri Olsa 提交于
Adding missing sample_id line into PERF_RECORD_ITRACE_START event comment. Signed-off-by: NJiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180107160356.28203-5-jolsa@kernel.org [ Update the tools/include/uapi/linux copy ] Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jiri Olsa 提交于
Currently we use perf_event_context::task_ctx_data to save and restore the LBR status when the task is scheduled out and in. We don't allocate it for child contexts, which results in shorter task's LBR stack, because we don't save the history from previous run and start over every time we schedule the task in. I made a test to generate samples with LBR call stack and got higher numbers on bigger chain depths: before: after: LBR call chain: nr: 1 60561 498127 LBR call chain: nr: 2 0 0 LBR call chain: nr: 3 107030 2172 LBR call chain: nr: 4 466685 62758 LBR call chain: nr: 5 2307319 878046 LBR call chain: nr: 6 48713 495218 LBR call chain: nr: 7 1040 4551 LBR call chain: nr: 8 481 172 LBR call chain: nr: 9 878 120 LBR call chain: nr: 10 2377 6698 LBR call chain: nr: 11 28830 151487 LBR call chain: nr: 12 29347 339867 LBR call chain: nr: 13 4 22 LBR call chain: nr: 14 3 53 Signed-off-by: NJiri Olsa <jolsa@kernel.org> Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Fixes: 4af57ef2 ("perf: Add pmu specific data for perf task context") Link: http://lkml.kernel.org/r/20180107160356.28203-4-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jiri Olsa 提交于
Display namespaces bit in -vv debug display: $ perf record -vv --namespaces ... ... perf_event_attr: size 112 ... namespaces 1 Signed-off-by: NJiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180107160356.28203-3-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jiri Olsa 提交于
There's no reason anymore to treat babel trace in a special way, because a) we no longer display its state b) the needed babeltrace library is now out and well adopted among distros. Signed-off-by: NJiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180107160356.28203-2-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jin Yao 提交于
perf script has a --time option to limit the time range of output. It only supports absolute time. Now this option is extended to support multiple time ranges and support the percent of time. For example: 1. Select the first and second 10% time slices: perf script --time 10%/1,10%/2 2. Select from 0% to 10% and 30% to 40% slices: perf script --time 0%-10%,30%-40% Changelog: v6: Fix the merge issue with latest perf/core branch. No functional changes. v5: Add checking of first/last sample time to detect if it's recorded in perf.data. If it's not recorded, returns error message to user. v4: Remove perf_time__skip_sample, only uses perf_time__ranges_skip_sample v3: Since the definitions of first_sample_time/last_sample_time are moved from perf_session to perf_evlist so change the related code. Signed-off-by: NJin Yao <yao.jin@linux.intel.com> Acked-by: NJiri Olsa <jolsa@kernel.org> Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1512738826-2628-7-git-send-email-yao.jin@linux.intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jin Yao 提交于
perf report has a --time option to limit the time range of output. It only supports absolute time. Now this option is extended to support multiple time ranges and support the percent of time. For example: 1. Select the first and second 10% time slices: perf report --time 10%/1,10%/2 2. Select from 0% to 10% and 30% to 40% slices: perf report --time 0%-10%,30%-40% Changelog: v6: Fix the merge issue with latest perf/core branch. No functional changes. v5: Add checking of first/last sample time to detect if it's recorded in perf.data. If it's not recorded, returns error message to user. v4: Remove perf_time__skip_sample, only uses perf_time__ranges_skip_sample v3: Since the definitions of first_sample_time/last_sample_time are moved from perf_session to perf_evlist so change the related code. Signed-off-by: NJin Yao <yao.jin@linux.intel.com> Acked-by: NJiri Olsa <jolsa@kernel.org> Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1512738826-2628-6-git-send-email-yao.jin@linux.intel.com [ Add missing colons at end of examples in the man page ] Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jin Yao 提交于
Previous patch supports the multiple time range. For example, select the first and second 10% time slices. perf report --time 10%/1,10%/2 We need a function to check if a timestamp is in the ranges of [0, 10%) and [10%, 20%]. Note that it includes the last element in [10%, 20%] but it doesn't include the last element in [0, 10%). It's to avoid the overlap. This patch implments a new function perf_time__ranges_skip_sample for this checking. Change log: v4: Let perf_time__ranges_skip_sample be compatible with perf_time__skip_sample when only one time range. Signed-off-by: NJin Yao <yao.jin@linux.intel.com> Acked-by: NJiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1512738826-2628-5-git-send-email-yao.jin@linux.intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jin Yao 提交于
Current perf report/script/... have a --time option to limit the time range of output. But right now it only supports absolute time, add support for time percentage. For example: 1. Select the second 10% time slice perf report --time 10%/2 2. Select from 0% to 10% time slice perf report --time 0%-10% It also support the multiple time ranges. 3. Select the first and second 10% time slices perf report --time 10%/1,10%/2 4. Select from 0% to 10% and 30% to 40% slices perf report --time 0%-10%,30%-40% Changelog: v4: An issue is found. Following passes. perf script --time 10%/10x12321xsdfdasfdsafdsafdsa Now it uses strtol to replace atoi. Committer notes: This just puts in place the infrastructure, so the examples in this cset comment will only work later, after more patches in this series are applied. Signed-off-by: NJin Yao <yao.jin@linux.intel.com> Acked-by: NJiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1512738826-2628-4-git-send-email-yao.jin@linux.intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jin Yao 提交于
In the default 'perf record' configuration, all samples are processed, to create the HEADER_BUILD_ID table. So it's very easy to get the first/last samples and save the time to perf file header via the function write_sample_time(). Later, at post processing time, perf report/script will fetch the time from perf file header. Committer testing: # perf record -a sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 2.099 MB perf.data (1101 samples) ] [root@jouet home]# perf report --header | grep "time of " # time of first sample : 22947.909226 # time of last sample : 22948.910704 # # perf report -D | grep PERF_RECORD_SAMPLE\( 0 22947909226101 0x20bb68 [0x30]: PERF_RECORD_SAMPLE(IP, 0x4001): 0/0: 0xffffffffa21b1af3 period: 1 addr: 0 0 22947909229928 0x20bb98 [0x30]: PERF_RECORD_SAMPLE(IP, 0x4001): 0/0: 0xffffffffa200d204 period: 1 addr: 0 <SNIP> 3 22948910397351 0x219360 [0x30]: PERF_RECORD_SAMPLE(IP, 0x4001): 28251/28251: 0xffffffffa22071d8 period: 169518 addr: 0 0 22948910652380 0x20f120 [0x30]: PERF_RECORD_SAMPLE(IP, 0x4001): 0/0: 0xffffffffa2856816 period: 198807 addr: 0 2 22948910704034 0x2172d0 [0x30]: PERF_RECORD_SAMPLE(IP, 0x4001): 0/0: 0xffffffffa2856816 period: 88111 addr: 0 # Changelog: v7: Just update the patch description according to Arnaldo's suggestion. v6: Currently '--buildid-all' is not enabled at default. So the walking on all samples is the default operation. There is no big overhead to calculate the timestamp boundary in process_sample_event handler once we already go through all samples. So the timestamp boundary calculation is enabled by default when '--buildid-all' is not enabled. While if '--buildid-all' is enabled, we creates a new option "--timestamp-boundary" for user to decide if it enables the timestamp boundary calculation. v5: There is an issue that the sample walking can only work when '--buildid-all' is not enabled. So we need to let the walking be able to work even if '--buildid-all' is enabled and let the processing skips the dso hit marking for this case. At first, I want to provide a new option "--record-time-boundaries". While after consideration, I think a new option is not very necessary. v3: Remove the definitions of first_sample_time and last_sample_time from struct record and directly save them in perf_evlist. Signed-off-by: NJin Yao <yao.jin@linux.intel.com> Acked-by: NJiri Olsa <jolsa@kernel.org> Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1512738826-2628-3-git-send-email-yao.jin@linux.intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jin Yao 提交于
perf report/script/... have a --time option to limit the time range of output. That's very useful to slice large traces, e.g. when processing the output of perf script for some analysis. But right now --time only supports absolute time. Also there is no fast way to get the start/end times of a given trace except for looking at it. This makes it hard to e.g. only decode the first half of the trace, which is useful for parallelization of scripts Another problem is that perf records are variable size and there is no synchronization mechanism. So the only way to find the last sample reliably would be to walk all samples. But we want to avoid that in perf report/... because it is already quite expensive. That is why storing the first sample time and last sample time in perf record is better. This patch creates a new header feature type HEADER_SAMPLE_TIME and related ops. Save the first sample time and the last sample time to the feature section in perf file header. That will be done when, for instance, processing build-ids, where we already have to process all samples to create the build-id table, take advantage of that to further amortize that processing by storing HEADER_SAMPLE_TIME to make 'perf report/script' faster when using --time. Committer testing: After this patch is applied the header is written with zeroes, we need the next patch, for "perf record" to actually write the timestamps: # perf report -D | grep PERF_RECORD_SAMPLE\( 22501155244406 0x44f0 [0x28]: PERF_RECORD_SAMPLE(IP, 0x4001): 25016/25016: 0xffffffffa21be8c5 period: 1 addr: 0 <SNIP> 22501155793625 0x4a30 [0x28]: PERF_RECORD_SAMPLE(IP, 0x4001): 25016/25016: 0xffffffffa21ffd50 period: 2828043 addr: 0 # perf report --header | grep "time of " # time of first sample : 0.000000 # time of last sample : 0.000000 # Changelog: v7: 1. Rebase to latest perf/core branch. 2. Add following clarification in patch description according to Arnaldo's suggestion. "That will be done when, for instance, processing build-ids, where we already have to process all samples to create the build-id table, take advantage of that to further amortize that processing by storing HEADER_SAMPLE_TIME to make 'perf report/script' faster when using --time." v4: Use perf script time style for timestamp printing. Also add with the printing of sample duration. v3: Remove the definitions of first_sample_time/last_sample_time from perf_session. Just define them in perf_evlist Signed-off-by: NJin Yao <yao.jin@linux.intel.com> Acked-by: NJiri Olsa <jolsa@kernel.org> Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1512738826-2628-2-git-send-email-yao.jin@linux.intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-