- 30 1月, 2008 40 次提交
-
-
由 Laurent Vivier 提交于
This patch lets GCC to determine which registers to save when we switch to/from a VCPU in the case of AMD i386 * Original code saves following registers: ebx, ecx, edx, esi, edi, ebp * Patched code: - informs GCC that we modify following registers using the clobber description: ebx, ecx, edx, esi, edi - rbp is saved (pop/push) because GCC seems to ignore its use in the clobber description. Signed-off-by: NLaurent Vivier <Laurent.Vivier@bull.net> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Laurent Vivier 提交于
This patch lets GCC to determine which registers to save when we switch to/from a VCPU in the case of AMD x86_64. * Original code saves following registers: rbx, rcx, rdx, rsi, rdi, rbp, r8, r9, r10, r11, r12, r13, r14, r15 * Patched code: - informs GCC that we modify following registers using the clobber description: rbx, rcx, rdx, rsi, rdi r8, r9, r10, r11, r12, r13, r14, r15 - rbp is saved (pop/push) because GCC seems to ignore its use in the clobber description. Signed-off-by: NLaurent Vivier <Laurent.Vivier@bull.net> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Laurent Vivier 提交于
This patch lets GCC to determine which registers to save when we switch to/from a VCPU in the case of intel i386. * Original code saves following registers: eax, ebx, ecx, edx, edi, esi, ebp (using popa) * Patched code: - informs GCC that we modify following registers using the clobber description: ebx, edi, rsi - doesn't save eax because it is an output operand (vmx->fail) - cannot put ecx in clobber description because it is an input operand, but as we modify it and we want to keep its value (vcpu), we must save it (pop/push) - ebp is saved (pop/push) because GCC seems to ignore its use the clobber description. - edx is saved (pop/push) because it is reserved by GCC (REGPARM) and cannot be put in the clobber description. - line "mov (%%esp), %3 \n\t" has been removed because %3 is ecx and ecx is restored just after. Signed-off-by: NLaurent Vivier <Laurent.Vivier@bull.net> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Laurent Vivier 提交于
This patch lets GCC to determine which registers to save when we switch to/from a VCPU in the case of intel x86_64. * Original code saves following registers: rax, rbx, rcx, rdx, rsi, rdi, rbp, r8, r9, r10, r11, r12, r13, r14, r15 * Patched code: - informs GCC that we modify following registers using the clobber description: rbx, rdi, rsi, r8, r9, r10, r11, r12, r13, r14, r15 - doesn't save rax because it is an output operand (vmx->fail) - cannot put rcx in clobber description because it is an input operand, but as we modify it and we want to keep its value (vcpu), we must save it (pop/push) - rbp is saved (pop/push) because GCC seems to ignore its use in the clobber description. - rdx is saved (pop/push) because it is reserved by GCC (REGPARM) and cannot be put in the clobber description. - line "mov (%%rsp), %3 \n\t" has been removed because %3 is rcx and rcx is restored just after. - line ASM_VMX_VMWRITE_RSP_RDX() is moved out of the ifdef/else/endif Signed-off-by: NLaurent Vivier <Laurent.Vivier@bull.net> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Izik Eidus 提交于
Currently kvm has a wart in that it requires three extra pages for use as a tss when emulating real mode on Intel. This patch moves the allocation internally, only requiring userspace to tell us where in the physical address space we can place the tss. Signed-off-by: NIzik Eidus <izike@qumranet.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Izik Eidus 提交于
Reserve a few memory slots for kernel internal use. This is good for case you have to register memory region and you want to be sure it was not registered from userspace, and for case you want to register a memory region that won't be seen from userspace. Signed-off-by: NIzik Eidus <izike@qumranet.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Izik Eidus 提交于
Remove kvm memory slot allocation mechanism from the ioctl and put it to exported function. Signed-off-by: NIzik Eidus <izike@qumranet.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Izik Eidus 提交于
kvm_vm_ioctl_set_memory_region() is able to remove memory in addition to adding it. Therefore when using kernel swapping support for old userspaces, we need to munmap the memory if the user request to remove it Signed-off-by: NIzik Eidus <izike@qumranet.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Eddie Dong 提交于
Signed-off-by: NYaozu (Eddie) Dong <eddie.dong@intel.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Eddie Dong 提交于
Signed-off-by: NYaozu (Eddie) Dong <eddie.dong@intel.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
This will help trap accesses to guest memory in atomic context. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
Split guest reset code out of vmx_vcpu_setup(). Besides being cleaner, this moves the realmode tss setup (which can sleep) outside vmx_vcpu_setup() (which is executed with preemption enabled). [izik: remove unused variable] Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Zhang Xiantao 提交于
First step to split kvm_vcpu. Currently, we just use an macro to define the common fields in kvm_vcpu for all archs, and all archs need to define its own kvm_vcpu struct. Signed-off-by: NZhang Xiantao <xiantao.zhang@intel.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Anthony Liguori 提交于
Allocate a userspace buffer for older userspaces. Also eliminate phys_mem buffer. The memset() in kvmctl really kills initial memory usage but swapping works even with old userspaces. A side effect is that maximum guest side is reduced for older userspace on i386. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Christian Borntraeger 提交于
ppc and s390 offer the possibility to track process times precisely by looking at cpu timer on every context switch, irq, softirq etc. We can use that infrastructure as well for guest time accounting. We need to account the used time before we change the state. This patch adds a call to account_system_vtime to kvm_guest_enter and kvm_guest exit. If CONFIG_VIRT_CPU_ACCOUNTING is not set, account_system_vtime is defined in hardirq.h as an empty function, which means this patch does not change the behaviour on other platforms. I compile tested this patch on x86 and function tested the patch on s390. Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Izik Eidus 提交于
This allows guest memory to be swapped. Pages which are currently mapped via shadow page tables are pinned into memory, but all other pages can be freely swapped. The patch makes gfn_to_page() elevate the page's reference count, and introduces kvm_release_page() that pairs with it. Signed-off-by: NIzik Eidus <izike@qumranet.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Izik Eidus 提交于
In case the page is not present in the guest memory map, return a dummy page the guest can scribble on. This simplifies error checking in its users. Signed-off-by: NIzik Eidus <izike@qumranet.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Izik Eidus 提交于
The current kvm mmu only reverse maps writable translation. This is used to write-protect a page in case it becomes a pagetable. But with swapping support, we need a reverse mapping of read-only pages as well: when we evict a page, we need to remove any mapping to it, whether writable or not. Signed-off-by: NIzik Eidus <izike@qumranet.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Izik Eidus 提交于
Signed-off-by: NIzik Eidus <izike@qumranet.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Nitin A Kamble 提交于
Instruction: cmc, clc, cli, sti opcodes: 0xf5, 0xf8, 0xfa, 0xfb respectively. [avi: fix reference to EFLG_IF which is not defined anywhere] Signed-off-by: NNitin A Kamble <nitin.a.kamble@intel.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
Simplify the walker level loop not to carry so much information from one loop to the next. In addition to being complex, this made kmap_atomic() critical sections difficult to manage. As a result of this change, kmap_atomic() sections are limited to actually touching the guest pte, which allows the other functions called from the walker to do sleepy operations. This will happen when we enable swapping. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Nitin A Kamble 提交于
Instructions: inc r16/r32 (opcode 0x40-0x47) dec r16/r32 (opcode 0x48-0x4f) Signed-off-by: NNitin A Kamble <nitin.a.kamble@intel.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
We now have a new namespace, KVM_REQ_*, for bits in vcpu->requests. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
Beside the obvious goodness of making code more common, this prevents a livelock with the next patch which moves interrupt injection out of the critical section. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Laurent Vivier 提交于
Add new-line at end of debug strings. Signed-off-by: NLaurent Vivier <Laurent.Vivier@bull.net> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Qing He 提交于
If no apic is enabled in the bitmap of an interrupt delivery with delivery mode of lowest priority, a warning should be reported rather than select a fallback vcpu Signed-off-by: NQing He <qing.he@intel.com> Signed-off-by: NEddie (Yaozu) Dong <eddie.dong@intel.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Carsten Otte 提交于
This patch splits kvm_vcpu_ioctl into archtecture independent parts, and x86 specific parts which go to kvm_arch_vcpu_ioctl in x86.c. Common ioctls for all architectures are: KVM_RUN, KVM_GET/SET_(S-)REGS, KVM_TRANSLATE, KVM_INTERRUPT, KVM_DEBUG_GUEST, KVM_SET_SIGNAL_MASK, KVM_GET/SET_FPU Note that some PPC chips don't have an FPU, so we might need an #ifdef around KVM_GET/SET_FPU one day. x86 specific ioctls are: KVM_GET/SET_LAPIC, KVM_SET_CPUID, KVM_GET/SET_MSRS An interresting aspect is vcpu_load/vcpu_put. We now have a common vcpu_load/put which does the preemption stuff, and an architecture specific kvm_arch_vcpu_load/put. In the x86 case, this one calls the vmx/svm function defined in kvm_x86_ops. Signed-off-by: NCarsten Otte <cotte@de.ibm.com> Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: NChristian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
Since the mmu uses different shadow pages for dirty large pages and clean large pages, this allows the mmu to drop ptes that are now invalid. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
This is consistent with real-mode permissions. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
By forcing clean huge pages to be read-only, we have separate roles for the shadow of a clean large page and the shadow of a dirty large page. This is necessary because different ptes will be instantiated for the two cases, even for read faults. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
We must set the bit before the shift, otherwise the wrong bit gets set. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
This is more consistent with the accessed bit management, and makes the dirty bit available earlier for other purposes. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Anthony Liguori 提交于
This time, the biggest change is gpa_to_hpa. The translation of GPA to HPA does not depend on the VCPU state unlike GVA to GPA so there's no need to pass in the kvm_vcpu. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Anthony Liguori 提交于
Some of the MMU functions take a struct kvm_vcpu even though they affect all VCPUs. This patch cleans up some of them to instead take a struct kvm. This makes things a bit more clear. The main thing that was confusing me was whether certain functions need to be called on all VCPUs. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Carsten Otte 提交于
Signed-off-by: NCarsten Otte <cotte@de.ibm.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Izik Eidus 提交于
Instead of having the kernel allocate memory to the guest, let userspace allocate it and pass the address to the kernel. This is required for s390 support, but also enables features like memory sharing and using hugetlbfs backed memory. Signed-off-by: NIzik Eidus <izike@qumranet.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Mike Day 提交于
Signed-off-by: NMike D. Day <ncmike@ncultra.org> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Rusty Russell 提交于
Since vcpu->apic is of the correct type, there's not need to cast. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Rusty Russell 提交于
Move kvm_create_lapic() into kvm_vcpu_init(), rather than having svm and vmx do it. And make it return the error rather than a fairly random -ENOMEM. This also solves the problem that neither svm.c nor vmx.c actually handles the error path properly. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-