Just add GSO to vlan_features initialization, and update comments.

When we set offload features, vlan_dev_fix_features() will do more check.
In vlan_dev_fix_features(), final features is decided by
features of real device and vlan_features of real device.
Signed-off-by: NShan Wei <shanwei@cn.fujitsu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The skb->rxhash cannot be properly computed if the
packet is a fragment.  To alleviate this, allow the
AF_PACKET client to ask for defragmentation to be
done at demux time.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Elide the ICMP on frag queue timeouts unconditionally for
this user.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fanouts allow packet capturing to be demuxed to a set of AF_PACKET
sockets.  Two fanout policies are implemented:

1) Hashing based upon skb->rxhash

2) Pure round-robin

An AF_PACKET socket must be fully bound before it tries to add itself
to a fanout.  All AF_PACKET sockets trying to join the same fanout
must all have the same bind settings.

Fanouts are identified (within a network namespace) by a 16-bit ID.
The first socket to try to add itself to a fanout with a particular
ID, creates that fanout.  When the last socket leaves the fanout
(which happens only when the socket is closed), that fanout is
destroyed.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6

The version number of modules build outside of the tree can get revision
numbers added. This is useful to give hints about the revision of a
distribution package and the used patchset. The prepended source number or
branch name doesn't add any additional information which would help to identify
problems and can therefore be omitted.
Signed-off-by: NSven Eckelmann <sven@narfation.org>
Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>

The packet aggregation needs to ensure that only compatible packets
are aggregated. Some of the checks are based on the interface number
while assuming that the first interface also is the primary interface
which is not always the case.
This patch addresses the issue by using the primary_if pointer.
Reported-by: NAntonio Quartulli <ordex@autistici.org>
Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>

The primary interface OGM has to be broadcasted on all hard-interfaces
even if the primary interface is not the first interface (if_num = 0).
Therefore the code has to compare the originating interface with the
primary interface instead of checking the if_num.
Reported-by: NLinus Luessing <linus.luessing@web.de>
Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>

now tt_local_event() takes a flags argument instead of a sequence of
boolean values which would grow up with the time.
Signed-off-by: NAntonio Quartulli <ordex@autistici.org>
Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>

In order to make possible to use the broadcast list for delayed sendings
the "delay" parameter is now provided instead of using 1 as hardcoded
value.
Signed-off-by: NAntonio Quartulli <ordex@autistici.org>
Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>

The tt_local_entry structure now has a 'flags' field. This helps to
unify the flags format to all the client related structures (tt_global_entry
and tt_change). The 'never_purge' field is now encoded in the 'flags' one.
To optimise the usage of this field, its length has been increased to 16bit
in order to use the eight leading bits (from 0 to 7) to store flags that
have to be sent on the wire, while the eight ending ones are used for local
computation only.

Moreover 'enum tt_change_flags' is now called 'enum tt_client_flags' and the
defined values apply to the tt_local_entry, tt_global_entry and the tt_change
'flags' field.
Signed-off-by: NAntonio Quartulli <ordex@autistici.org>
Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>

Clear warning message "MDC/MDIO access timeout" during first driver load by setting MDIO clock.
This warning has no significant meaning, since it occurs prior to the first PHY initialization.
Signed-off-by: NYaniv Rosner <yanivr@broadcom.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add autogrEEEn support on BCM84833 and 54618se, which allows to reduce power consumption.
Signed-off-by: NYaniv Rosner <yanivr@broadcom.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NYaniv Rosner <yanivr@broadcom.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When driver is unloaded, disable PMD in addition to TX laser, provided that the management firmware will be able to enable it back.
Signed-off-by: NYaniv Rosner <yanivr@broadcom.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add hardware PHY reset action for BCM578xx when fan failure occur.
The new bnx2x_warpcore_hw_reset warps bnx2x_warpcore_power_module to fit the .hw_reset function template of the phy structure.
Signed-off-by: NYaniv Rosner <yanivr@broadcom.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add CL37 BAM support according to configuration.
Signed-off-by: NYaniv Rosner <yanivr@broadcom.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Change 1G copper PHY BCM54616S to BCM54618SE since we only have HW with latter one of the two.
Signed-off-by: NYaniv Rosner <yanivr@broadcom.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Set the source MAC address for PFC packets and update its status during PMF migration.
Signed-off-by: NYaniv Rosner <yanivr@broadcom.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NTobias Klauser <tklauser@distanz.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NTobias Klauser <tklauser@distanz.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NTobias Klauser <tklauser@distanz.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NTobias Klauser <tklauser@distanz.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NTobias Klauser <tklauser@distanz.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NTobias Klauser <tklauser@distanz.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NTobias Klauser <tklauser@distanz.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NTobias Klauser <tklauser@distanz.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NTobias Klauser <tklauser@distanz.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

tcp_rmem and tcp_wmem use 1 page as default value for the minimum
amount of memory to be used, same as udp_wmem_min and udp_rmem_min.
Pages are different size on different architectures - use the right
units when describing the defaults.
Reviewed-by: NShan Wei <shanwei@cn.fujitsu.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NMax Matveev <makc@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

sctp does not use second and third ("default" and "max") values
of sctp_rmem tunable. The format is the same as tcp_rmem
but the meaning is different so make the documentation explicit to
avoid confusion.

sctp_wmem is not used at all.
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NMax Matveev <makc@redhat.com>
Reviewed-by: NShan Wei <shanwei@cn.fujitsu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

b44_tx() is run from softirq handler, it can use dev_kfree_skb() instead
of dev_kfree_skb_irq()
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

CCID-2's cwnd increases like TCP during slow-start, which has implications for
 * the local Sequence Window value (should be > cwnd),
 * the Ack Ratio value.
Hence an exponential growth, if it does not reflect the actual network
conditions, can quickly lead to instability.

This patch adds congestion-window validation (RFC2861) to CCID-2:
 * cwnd is constrained if the sender is application limited;
 * cwnd is reduced after a long idle period, as suggested in the '90 paper
   by Van Jacobson, in RFC 2581 (sec. 4.1);
 * cwnd is never reduced below the RFC 3390 initial window.

As marked in the comments, the code is actually almost a direct copy of the
TCP congestion-window-validation algorithms. By continuing this work, it may
in future be possible to use the TCP code (not possible at the moment).

The mechanism can be turned off using a module parameter. Sampling of the
currently-used window (moving-maximum) is however done constantly; this is
used to determine the expected window, which can be exploited to regulate
DCCP's Sequence Window value.

This patch also sets slow-start-after-idle (RFC 4341, 5.1), i.e. it behaves like
TCP when net.ipv4.tcp_slow_start_after_idle = 1.
Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk>

This replaces a switch statement with a test, using the equivalent
function dccp_data_packet(skb).  It also doubles the range of the field
`rx_num_data_pkts' by changing the type from `int' to `u32', avoiding
signed/unsigned comparison with the u16 field `dccps_r_ack_ratio'.
Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk>

This moves CCID-2's initial window function into the header file, since several
parts throughout the CCID-2 code need to call it (CCID-2 still uses RFC 3390).
Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: NLeandro Melo de Sales <leandro@ic.ufal.br>

Change the CCID (de)activation message to start with the
protocol name, as 'CCID' is already in there.
Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk>

Realising the following call pattern,
 * first dccp_entail() is called to enqueue a new skb and
 * then skb_clone() is called to transmit a clone of that skb,
this patch integrates both into the same function.
Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk>

This patch rearranges the order of statements of the slow-path input processing
(i.e. any other state than OPEN), to resolve the following issues.

 1. Dependencies: the order of statements now better matches RFC 4340, 8.5, i.e.
    step 7 is before step 9 (previously 9 was before 7), and parsing options in
    step 8 (which may consume resources) now comes after step 7.
 2. Sequence number checks are omitted if in state LISTEN/REQUEST, due to the
    note underneath the table in RFC 4340, 7.5.3.
    As a result, CCID processing is now indeed confined to OPEN/PARTOPEN states,
    i.e. congestion control is performed only on the flow of data packets. This
    avoids pathological cases of doing congestion control on those messages
    which set up and terminate the connection.
 3. Packets are now passed on to Ack Vector / CCID processing only after
    - step 7  (receive unexpected packets),
    - step 9  (receive Reset),
    - step 13 (receive CloseReq),
    - step 14 (receive Close)
    and only if the state is PARTOPEN. This simplifies CCID processing:
    - in LISTEN/CLOSED the CCIDs are non-existent;
    - in RESPOND/REQUEST the CCIDs have not yet been negotiated;
    - in CLOSEREQ and active-CLOSING the node has already closed this socket;
    - in passive-CLOSING the client is waiting for its Reset.
    In the last case, RFC 4340, 8.3 leaves it open to ignore further incoming
    data, which is the approach taken here.
Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk>

It is a function of SuperH architecture. There is no good to use
the function on a driver generally. So, the driver uses
dma_map_single() instead of __flush_purge_region.
Signed-off-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>