- 11 4月, 2010 18 次提交
-
-
由 Kashyap, Desai 提交于
Upgraded version string. Signed-off-by: NKashyap Desai <kashyap.desai@lsi.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Kashyap, Desai 提交于
Copyright changes for year 2010. Signed-off-by: NKashyap Desai <kashyap.desai@lsi.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Kashyap, Desai 提交于
RAID_SCSI_IO_PASSTHROUGH: Driver needs to be send the default descriptor for RAID Passthru, currently its sending SCSI_IO descriptor. Signed-off-by: NKashyap Desai <kashyap.desai@lsi.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Kashyap, Desai 提交于
Added proper return type values in case memory allocation failed. Signed-off-by: NKashyap Desai <kashyap.desai@lsi.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Kashyap, Desai 提交于
Removed all the mutex's for ioc->tm_cmds.mutex, then created one single mutex inside the function mpt2sas_scsih_issue_tm. This is the single function used when sending task management. Also the sanity checks required for scsi mid layer escalation were moved to inside the same function because these checks need to be done while the mutex is held. The ioc->tm_cmds.mutex inside the IOCTL branch is really not required since there is another mutex in this code called for ctl_cmds handling this sync. Signed-off-by: NKashyap Desai <kashyap.desai@lsi.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Kashyap, Desai 提交于
1. Fixes for little endian issues. 2. Now Debug info for Discovery event is more readable. Signed-off-by: NKashyap Desai <kashyap.desai@lsi.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Kashyap, Desai 提交于
Now Driver will not treat NEEDS_INIT as failure. In addition to this, the driver will now display message to describe the the access flags when bits are set, so the end user can better understand failures. Signed-off-by: NKashyap Desai <kashyap.desai@lsi.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Kashyap, Desai 提交于
Aded checks for shost_recovery flag for early return from function. Signed-off-by: NKashyap Desai <kashyap.desai@lsi.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Kashyap, Desai 提交于
use the get_free_pages API for larger contigious physical memory chunk. Also, the ioc->chain_depth need to be changed from a 16bit to 32bit variable because the number of chains will exceed 64k when the queue depth is large. Signed-off-by: NKashyap Desai <kashyap.desai@lsi.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Kashyap, Desai 提交于
bug fix in the handling of the internal device reset event The reason code check in scsih_sas_device_status_change_event never evaluates as true for internal device reset, hence driver never quiesce s IO when firmware is sending a device reset. The fix is to change the evaluate to: if (event_data->ReasonCode != MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET && event_data->ReasonCode != MPI2_EVENT_SAS_DEV_STAT_RC_CMP_INTERNAL_DEV_RESET) return; Signed-off-by: NKashyap Desai <kashyap.desai@lsi.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Kashyap, Desai 提交于
incorrect timestamp on 32 bit platforms: The upper 32 bit of the timestamp was getting truncated when converting seconds to milliseconds, which was due to the variable being long. To fix the problem, the variable needs to be u64. Also the microseconds conversion to milliseconds was incorrect; it should be divide by 1000 instead of divide by 8. Signed-off-by: NKashyap Desai <kashyap.desai@lsi.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Kashyap, Desai 提交于
[SCSI] mpt2sas : Do not reset handle before calling _scsih_remove_device in RESCAN task after HBA RESET Setting handle to zero is not required before _scsih_remove_device. Driver uses sas_device->handle reference in _scsih_remove_device. Signed-off-by: NKashyap Desai <kashyap.desai@lsi.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Richard A Lary 提交于
This patch replaces incorrect base address space flag with correct IO resource flag. Also, performs check of memory resource to validate resource before using. Signed-off-by: NRichard A Lary <rlary@linux.vnet.ibm.com> Acked-by: N"Desai, Kashyap" <Kashyap.Desai@lsi.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Kashyap, Desai 提交于
external host not connecting after controller reboot: The problem is : devices are not coming back after having the cable disconnected then reconnected. The problem is because the driver/firmware device removal handshake is failing. Due to this failure, the controller firmware is not sending out device add events when the target is reconnected. This is root caused to a race in the driver/firmware device removal algorithm. There is duplicate code in both interrupt and user context; where target reset is being issue from user context path while sas_iounit_control(OP_REMOVE) is being sent from interrupt context. An active target_reset will fail the OP_REMOVE. To fix this problem, the duplicate code has been removed from user context path. Signed-off-by: NKashyap Desai <kashyap.desai@lsi.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Kashyap, Desai 提交于
Upgraded version string. Signed-off-by: NKashyap Desai <kashyap.desai@lsi.com> Reviewed-by: NEric Moore <eric.moore@lsi.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Kashyap, Desai 提交于
modified _scsih_sas_device_find_by_handle so to handle the search on both list(device list and device_init_list) Also, we moved the priority of the search so the ioc->sas_device_list is done first. The "sas_device_init_list" is only used during the 1st port enable, so its unlikely there’s devices on it. Signed-off-by: NKashyap Desai <kashyap.desai@lsi.com> Reviewed-by: NEric Moore <eric.moore@lsi.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Kashyap, Desai 提交于
Add the cancel_pending_work flag from the fw_event_work structure, and then to set the flag during host reset, check the flag later from work threads context and if cancel_pending_work_flag is set ingore those events. Now Rescan after host reset is changed. Added special task MPT2SAS_RESCAN_AFTER_HOST_RESET. This task will be queued at the time of HBA reset. this task is treated as barrier. All work after MPT2SAS_RESCAN_AFTER_HOST_RESET will be treated as new work and will be server by callback handle. If host_recovery is going on while running RESCAN task, it will wait for shos_recovery_done completion which will be called from HBA reset DONE context. Signed-off-by: NKashyap Desai <kashyap.desai@lsi.com> Reviewed-by: NEric Moore <eric.moore@lsi.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 FUJITA Tomonori 提交于
scsi_dma_map() returns -1 if an error occurred (zero means that the command has no data). So the following current code can't catch an error: sges_left = scsi_dma_map(scmd); if (!sges_left) { sdev_printk(KERN_ERR, scmd->device, "pci_map_sg" " failed: request for %d bytes!\n", scsi_bufflen(scmd)); return -ENOMEM; } Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: N"Desai, Kashyap" <Kashyap.Desai@lsi.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
- 30 3月, 2010 1 次提交
-
-
由 Tejun Heo 提交于
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: NTejun Heo <tj@kernel.org> Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
-
- 18 2月, 2010 1 次提交
-
-
由 Kashyap, Desai 提交于
For RAID volume sas_is_tlr_enabled call will hit BUG at scsi_transport_sas.c:163, since raid volume is not visible to sas transport layer. Now Added check to make sure arg pass in sas_is_tlr_enabled() is not a volume. Signed-off-by: NKashyap Desai <kashyap.desai@lsi.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
- 09 2月, 2010 10 次提交
-
-
由 Kashyap, Desai 提交于
Version upgraded to 04.100.01.00. Signed-off-by: NKashyap Desai <kashyap.desai@lsi.com> Reviewed-by: NEric Moore <eric.moore@lsi.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Kashyap, Desai 提交于
If TLR is supported for end device, MPT2SAS driver will enable the TLR bit in the SCSI_IO for every request. If there is a response with MPI2_SCSITASKMGMT_RSP_INVALID_FRAME, the driver will turn off the TLR logic. [jejb: updated to new transport class TLR API] Signed-off-by: NKashyap Desai <kashyap.desai@lsi.com> Reviewed-by: NEric Moore <Eric.moore@lsi.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Kashyap, Desai 提交于
Update header to latest MPI SPEC revision. Signed-off-by: NKashyap Desai <kashyap.desai@lsi.com> Reviewed-by: NEric Moore <eric.moore@lsi.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Kashyap, Desai 提交于
Added new callbacks phy_enable and set_phy_speed in the mpt2sas_transport_functions template. This will allow end user to enable/disable phys and change links rates using the SysFS interface. Current implementation only supports direct attached phys, but we could in the future add support for expander based phys. A new subroutine mpt2sas_config_set_sas_iounit_pg1 was added; this wrapper function used to send request to controller firmware to modify the phys and link rates. A new subroutine _transport_find_local_phy was added; a function for easly obtaining the local phy object for direct attached. Example to disable a phy echo 0 > /sys/class/phy3:0/enable Example to enable the same phy echo 1 > /sys/class/phy3:0/enable Example to change the link rate to 1.5 #echo "1.5 Gbit" > /sys/class/phy3:0/maximum_linkrate #cat /sys/class/phy3:0/negotiated_linkrate 1.5 Gbit Example to change the link rate to 3.0 #echo "3.0 Gbit" > /sys/class/phy3:0/maximum_linkrate #cat /sys/class/phy3:0/negotiated_linkrate 3.0 Gbit Example to change the link rate to 6.0 #echo "6.0 Gbit" > /sys/class/phy3:0/maximum_linkrate #cat /sys/class/phy3:0/negotiated_linkrate 6.0 Gbit Signed-off-by: NKashyap Desai <kashyap.desai@lsi.com> Reviewed-by: NEric Moore <eric.moore@lsi.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Kashyap, Desai 提交于
Adding support for raid transport layer. This will provide sysfs attributes containing raid level, state, and resync rate. MPT2SAS module will select RAID_ATTRS. Signed-off-by: NKashyap Desai <kashyap.desai@lsi.com> Reviewed-by: NEric Moore <eric.moore@lsi.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Kashyap, Desai 提交于
On ppc64, an 32bit application was failing due to data buffers not being copied properly from user to kernel memory. The problem due to improper conversion of 32 to 64 bit pointers. The fix is to use compat_ptr to setup the pointer compatibility in the routine _ctl_compat_mpt_command. Signed-off-by: NKashyap Desai <kashyap.desai@lsi.com> Reviewed-by: NEric Moore <eric.moore@lsi.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Kashyap, Desai 提交于
(1) change the formentioned string from logging_level to fwfault_debug (2) set ioc->fwfault_debug to the command line option mpt2sas_fwfault_debug setting at driver load time. Signed-off-by: NKashyap Desai <kashyap.desai@lsi.com> Reviewed-by: NEric Moore <eric.moore@lsi.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Kashyap, Desai 提交于
Use resource_size_t to define the type resource for the system interface register set. The existing implementation was using "unsigned long" which would be 32 bit in 32 bit OS. If 32 bit OS is using 64 bit physical address space for the system interface register set, we need to shift to using resource_size_t which takes care of physical address space. Signed-off-by: NKashyap Desai <kashyap.desai@lsi.com> Reviewed-by: NEric Moore <eric.moore@lsi.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Kashyap, Desai 提交于
The driver was modified to return -ENODATA when there is a timeout via ioctl path. Signed-off-by: NKashyap Desai <kashyap.desai@lsi.com> Reviewed-by: NEric Moore <eric.moore@lsi.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Kashyap, Desai 提交于
The driver hangs when doing `rmmod mpt2sas` if there are any IR volumes present.The hang is due the scsi midlayer trying to access the IR volumes after the driver releases controller resources. Perhaps when scsi_remove_host is called,the scsi mid layer is sending some request. This doesn't occur for bare drives becuase the driver is already reporting those drives deleted prior to calling mpt2sas_base_detach. To solve this issue, we need to delete the volumes as well. Signed-off-by: NKashyap Desai <kashyap.desai@lsi.com> Reviewed-by: NEric Moore <eric.moore@lsi.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
- 10 12月, 2009 1 次提交
-
-
由 Kashyap, Desai 提交于
Internal command scsih_cmds init is included in mpt2sas_base_attach. Signed-off-by: NKashyap Desai <kashyap.desai@lsi.com> Cc: Stable Tree <stable@kernel.org> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
- 05 12月, 2009 1 次提交
-
-
由 Mike Christie 提交于
This patch modifies scsi_host_template->change_queue_depth so that it takes an argument indicating why it is being called. This will be used so that if a LLD needs to do some extra processing when handling queue fulls or later ramp ups, it can do so. This is a simple port of the drivers setting a change_queue_depth callback. In the patch I just have these LLDs adjust the queue depth if the user was requesting it. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> [Vasu.Dev: v2 Also converted pmcraid_change_queue_depth and then verified all modules compile using "make allmodconfig" for any new build warnings on X86_64. Updated original description after combing two original patches from Mike to make this patch git bisectable.] Signed-off-by: NVasu Dev <vasu.dev@intel.com> [jejb: fixed up 53c700] Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
- 04 12月, 2009 1 次提交
-
-
由 André Goddard Rosa 提交于
That is "success", "unknown", "through", "performance", "[re|un]mapping" , "access", "default", "reasonable", "[con]currently", "temperature" , "channel", "[un]used", "application", "example","hierarchy", "therefore" , "[over|under]flow", "contiguous", "threshold", "enough" and others. Signed-off-by: NAndré Goddard Rosa <andre.goddard@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 30 10月, 2009 7 次提交
-
-
由 Kashyap, Desai 提交于
Bump version to 03.100.03.00 Signed-off-by: NKashyap Desai <kashyap.desai@lsi.com> Signed-off-by: NEric Moore <Eric.moore@lsi.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Kashyap, Desai 提交于
(1) target resets are sending link change rate events with no link rate change -> thus said the driver was modified so when there is no link rate change, we don't need to call mpt2sas_transport_update_links nor _scsih_ublock_io_device. (2) There were changes made in _scsih_sas_topology_change_event_debug to change the debug strings so they are more clear. Also the link rate change information was added to display the new and previous link rate. for the MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST event when the ExpStatus is set to zero, display "responding" instead of "unknown status". Signed-off-by: NKashyap Desai <kashyap.desai@lsi.com> Signed-off-by: NEric Moore <Eric.moore@lsi.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Kashyap, Desai 提交于
(1) Added new function _scsih_ir_shutdown. This function will issue the MPI2_RAID_ACTION_SYSTEM_SHUTDOWN_INITIATED request via MPI2_FUNCTION_RAID_ACTION. The function will wait 10 seconds for reply message frame, then print out the ioc status and loginfo. This function is only called when there are raid volumes present. (2) Add shutdown callback in the struct pci_driver object scsih_driver. This will be called only when the system is shutting down. From this function, we will call _scsih_ir_shutdown mentioned above. (3) Add support in _scsih_remove to call _scsih_ir_shutdown. The function _scsih_remove will be called when the driver is unloaded (and system is still running). scsih internal command contex is added to send internal message frames from mpt2sas_scsih.c. Signed-off-by: NKashyap Desai <kashyap.desai@lsi.com> Signed-off-by: NEric Moore <Eric.moore@lsi.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Kashyap, Desai 提交于
When receiving the MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET event, the driver will set the tm_busy flag in the sdev private host data, When tm_busy flag is set, the driver will return SCSI_MLQUEUE_DEVICE_BUSY, effectly freezing the IO to the device. The tm_busy flag is cleared with the MPI2_EVENT_SAS_DEV_STAT_RC_CMP_INTERNAL_DEV_RESET event. Signed-off-by: NKashyap Desai <kashyap.desai@lsi.com> Signed-off-by: NEric Moore <Eric.moore@lsi.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Kashyap, Desai 提交于
(1) EEDP(End to End data protection) was not working. This was due to not setting EEDP BlockSize and Flags to little endian format in the message frame. (2) Some expander sysfs attributes were not getting set properly. The sas format was not getting set due to endian issues with sas_format field in the struct rep_manu_reply. Since sas_format was not set properly, the component_vendor_id, component_revision_id, and component_id were not set. (3) In _transport_smp_handler: we don't need to convert the smid from little endian to cpu prior to calling mpt2sas_base_free_smid, because its allready in cpu format. (4) Some loginfos and ioc status were not xonverted from little endian to cpu. Signed-off-by: NKashyap Desai <kashyap.desai@lsi.com> Signed-off-by: NEric Moore <Eric.moore@lsi.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Kashyap, Desai 提交于
cpu_to_le64 when calculating the physical dma address. This will properly handle endianess on big endian systems. The return value of this function was changed from dma_addr_t to __le64. Remove the typecasting of u32 when setting the SenseBufferLowAddress, since its already in __le32 format. Signed-off-by: NKashyap Desai <kashyap.desai@lsi.com> Signed-off-by: NEric Moore <Eric.moore@lsi.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Kashyap, Desai 提交于
[SCSI] mpt2sas: Return DID_TRANSPORT_DISRUPTED in nexus loss,SCSI_MLQUEUE_DEVICE_BUSY if device is busy 1 Its observed that the OS was sending request to the driver after it had been put into blocking state, so the driver was modified to return SCSI_MLQUEUE_DEVICE_BUSY. 2. Driver will return DID_TRANSPORT_DISRUPTED when sdev is haivng nexus loss. This occurrs when sdev is blocked, between the MPI2_EVENT_SAS_TOPO_RC_DELAY_NOT_RESPONDING and MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING events. Signed-off-by: NKashyap Desai <kashyap.desai@lsi.com> Signed-off-by: NEric Moore <Eric.moore@lsi.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-