- 29 11月, 2005 1 次提交
-
-
由 Rik van Riel 提交于
Some users (hi Zwane) have seen a problem when running a workload that eats nearly all of physical memory - th system does an OOM kill, even when there is still a lot of swap free. The problem appears to be a very big task that is holding the swap token, and the VM has a very hard time finding any other page in the system that is swappable. Instead of ignoring the swap token when sc->priority reaches 0, we could simply take the swap token away from the memory hog and make sure we don't give it back to the memory hog for a few seconds. This patch resolves the problem Zwane ran into. Signed-off-by: NRik van Riel <riel@redhat.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 14 11月, 2005 1 次提交
-
-
由 Rohit Seth 提交于
Clean up of __alloc_pages. Restoration of previous behaviour, plus further cleanups by introducing an 'alloc_flags', removing the last of should_reclaim_zone. Signed-off-by: NRohit Seth <rohit.seth@intel.com> Signed-off-by: NNick Piggin <npiggin@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 30 10月, 2005 2 次提交
-
-
由 Hugh Dickins 提交于
Christoph Lameter demonstrated very poor scalability on the SGI 512-way, with a many-threaded application which concurrently initializes different parts of a large anonymous area. This patch corrects that, by using a separate spinlock per page table page, to guard the page table entries in that page, instead of using the mm's single page_table_lock. (But even then, page_table_lock is still used to guard page table allocation, and anon_vma allocation.) In this implementation, the spinlock is tucked inside the struct page of the page table page: with a BUILD_BUG_ON in case it overflows - which it would in the case of 32-bit PA-RISC with spinlock debugging enabled. Splitting the lock is not quite for free: another cacheline access. Ideally, I suppose we would use split ptlock only for multi-threaded processes on multi-cpu machines; but deciding that dynamically would have its own costs. So for now enable it by config, at some number of cpus - since the Kconfig language doesn't support inequalities, let preprocessor compare that with NR_CPUS. But I don't think it's worth being user-configurable: for good testing of both split and unsplit configs, split now at 4 cpus, and perhaps change that to 8 later. There is a benefit even for singly threaded processes: kswapd can be attacking one part of the mm while another part is busy faulting. Signed-off-by: NHugh Dickins <hugh@veritas.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Lee Schermerhorn 提交于
Martin Hicks' page cache reclaim patch added the 'may_swap' flag to the scan_control struct; and modified shrink_list() not to add anon pages to the swap cache if may_swap is not asserted. Ref: http://marc.theaimsgroup.com/?l=linux-mm&m=111461480725322&w=4 However, further down, if the page is mapped, shrink_list() calls try_to_unmap() which will call try_to_unmap_one() via try_to_unmap_anon (). try_to_unmap_one() will BUG_ON() an anon page that is NOT in the swap cache. Martin says he never encountered this path in his testing, but agrees that it might happen. This patch modifies shrink_list() to skip anon pages that are not already in the swap cache when !may_swap, rather than just not adding them to the cache. Signed-off-by: NLee Schermerhorn <lee.schermerhorn@hp.com> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 28 10月, 2005 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 17 10月, 2005 1 次提交
-
-
由 Linus Torvalds 提交于
As noticed by Nick Piggin, we need to make sure that we check the page count before we check for PageDirty, since the dirty check is only valid if the count implies that we're the only possible ones holding the page. We always did do this, but the code needs a read-memory-barrier to make sure that the orderign is also honored by the CPU. (The writer side is ordered due to the atomic decrement and test on the page count, see the discussion on linux-kernel) Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 13 9月, 2005 1 次提交
-
-
由 Con Kolivas 提交于
Use the pgdat pointer we've already defined in wakeup_kswapd Signed-off-by: NCon Kolivas <kernel@kolivas.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 08 9月, 2005 1 次提交
-
-
由 Paul Jackson 提交于
This patch makes use of the previously underutilized cpuset flag 'mem_exclusive' to provide what amounts to another layer of memory placement resolution. With this patch, there are now the following four layers of memory placement available: 1) The whole system (interrupt and GFP_ATOMIC allocations can use this), 2) The nearest enclosing mem_exclusive cpuset (GFP_KERNEL allocations can use), 3) The current tasks cpuset (GFP_USER allocations constrained to here), and 4) Specific node placement, using mbind and set_mempolicy. These nest - each layer is a subset (same or within) of the previous. Layer (2) above is new, with this patch. The call used to check whether a zone (its node, actually) is in a cpuset (in its mems_allowed, actually) is extended to take a gfp_mask argument, and its logic is extended, in the case that __GFP_HARDWALL is not set in the flag bits, to look up the cpuset hierarchy for the nearest enclosing mem_exclusive cpuset, to determine if placement is allowed. The definition of GFP_USER, which used to be identical to GFP_KERNEL, is changed to also set the __GFP_HARDWALL bit, in the previous cpuset_gfp_hardwall_flag patch. GFP_ATOMIC and GFP_KERNEL allocations will stay within the current tasks cpuset, so long as any node therein is not too tight on memory, but will escape to the larger layer, if need be. The intended use is to allow something like a batch manager to handle several jobs, each job in its own cpuset, but using common kernel memory for caches and such. Swapper and oom_kill activity is also constrained to Layer (2). A task in or below one mem_exclusive cpuset should not cause swapping on nodes in another non-overlapping mem_exclusive cpuset, nor provoke oom_killing of a task in another such cpuset. Heavy use of kernel memory for i/o caching and such by one job should not impact the memory available to jobs in other non-overlapping mem_exclusive cpusets. This patch enables providing hardwall, inescapable cpusets for memory allocations of each job, while sharing kernel memory allocations between several jobs, in an enclosing mem_exclusive cpuset. Like Dinakar's patch earlier to enable administering sched domains using the cpu_exclusive flag, this patch also provides a useful meaning to a cpuset flag that had previously done nothing much useful other than restrict what cpuset configurations were allowed. Signed-off-by: NPaul Jackson <pj@sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 05 9月, 2005 2 次提交
-
-
由 Martin Hicks 提交于
Christoph Lameter and Marcelo Tosatti asked to get rid of the atomic_inc_and_test() to cleanup the atomic ops in the zone reclaim code. Signed-off-by: NMartin Hicks <mort@sgi.com> Signed-off-by: NChristoph Lameter <clameter@sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Martin Hicks 提交于
Add a capability check to sys_set_zone_reclaim(). This syscall is not something that should be available to a user. Signed-off-by: NMartin Hicks <mort@sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 29 6月, 2005 1 次提交
-
-
由 Pekka J Enberg 提交于
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 26 6月, 2005 1 次提交
-
-
由 Christoph Lameter 提交于
1. Establish a simple API for process freezing defined in linux/include/sched.h: frozen(process) Check for frozen process freezing(process) Check if a process is being frozen freeze(process) Tell a process to freeze (go to refrigerator) thaw_process(process) Restart process frozen_process(process) Process is frozen now 2. Remove all references to PF_FREEZE and PF_FROZEN from all kernel sources except sched.h 3. Fix numerous locations where try_to_freeze is manually done by a driver 4. Remove the argument that is no longer necessary from two function calls. 5. Some whitespace cleanup 6. Clear potential race in refrigerator (provides an open window of PF_FREEZE cleared before setting PF_FROZEN, recalc_sigpending does not check PF_FROZEN). This patch does not address the problem of freeze_processes() violating the rule that a task may only modify its own flags by setting PF_FREEZE. This is not clean in an SMP environment. freeze(process) is therefore not SMP safe! Signed-off-by: NChristoph Lameter <christoph@lameter.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 22 6月, 2005 5 次提交
-
-
由 Darren Hart 提交于
try_to_free_pages accepts a third argument, order, but hasn't used it since before 2.6.0. The following patch removes the argument and updates all the calls to try_to_free_pages. Signed-off-by: NDarren Hart <dvhltc@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Martin Hicks 提交于
When early zone reclaim is turned on the LRU is scanned more frequently when a zone is low on memory. This limits when the zone reclaim can be called by skipping the scan if another thread (either via kswapd or sync reclaim) is already reclaiming from the zone. Signed-off-by: NMartin Hicks <mort@sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Martin Hicks 提交于
This is the core of the (much simplified) early reclaim. The goal of this patch is to reclaim some easily-freed pages from a zone before falling back onto another zone. One of the major uses of this is NUMA machines. With the default allocator behavior the allocator would look for memory in another zone, which might be off-node, before trying to reclaim from the current zone. This adds a zone tuneable to enable early zone reclaim. It is selected on a per-zone basis and is turned on/off via syscall. Adding some extra throttling on the reclaim was also required (patch 4/4). Without the machine would grind to a crawl when doing a "make -j" kernel build. Even with this patch the System Time is higher on average, but it seems tolerable. Here are some numbers for kernbench runs on a 2-node, 4cpu, 8Gig RAM Altix in the "make -j" run: wall user sys %cpu ctx sw. sleeps ---- ---- --- ---- ------ ------ No patch 1009 1384 847 258 298170 504402 w/patch, no reclaim 880 1376 667 288 254064 396745 w/patch & reclaim 1079 1385 926 252 291625 548873 These numbers are the average of 2 runs of 3 "make -j" runs done right after system boot. Run-to-run variability for "make -j" is huge, so these numbers aren't terribly useful except to seee that with reclaim the benchmark still finishes in a reasonable amount of time. I also looked at the NUMA hit/miss stats for the "make -j" runs and the reclaim doesn't make any difference when the machine is thrashing away. Doing a "make -j8" on a single node that is filled with page cache pages takes 700 seconds with reclaim turned on and 735 seconds without reclaim (due to remote memory accesses). The simple zone_reclaim syscall program is at http://www.bork.org/~mort/sgi/zone_reclaim.cSigned-off-by: NMartin Hicks <mort@sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Martin Hicks 提交于
Here's the next round of these patches. These are totally different in an attempt to meet the "simpler" request after the last patches. For reference the earlier threads are: http://marc.theaimsgroup.com/?l=linux-kernel&m=110839604924587&w=2 http://marc.theaimsgroup.com/?l=linux-mm&m=111461480721249&w=2 This set of patches replaces my other vm- patches that are currently in -mm. So they're against 2.6.12-rc5-mm1 about half way through the -mm patchset. As I said already this patch is a lot simpler. The reclaim is turned on or off on a per-zone basis using a syscall. I haven't tested the x86 syscall, so it might be wrong. It uses the existing reclaim/pageout code with the small addition of a may_swap flag to scan_control (patch 1/4). I also added __GFP_NORECLAIM (patch 3/4) so that certain allocation types can be flagged to never cause reclaim. This was a deficiency that was in all of my earlier patch sets. Previously, doing a big buffered read would fill one zone with page cache and then start to reclaim from that same zone, leaving the other zones untouched. Adding some extra throttling on the reclaim was also required (patch 4/4). Without the machine would grind to a crawl when doing a "make -j" kernel build. Even with this patch the System Time is higher on average, but it seems tolerable. Here are some numbers for kernbench runs on a 2-node, 4cpu, 8Gig RAM Altix in the "make -j" run: wall user sys %cpu ctx sw. sleeps ---- ---- --- ---- ------ ------ No patch 1009 1384 847 258 298170 504402 w/patch, no reclaim 880 1376 667 288 254064 396745 w/patch & reclaim 1079 1385 926 252 291625 548873 These numbers are the average of 2 runs of 3 "make -j" runs done right after system boot. Run-to-run variability for "make -j" is huge, so these numbers aren't terribly useful except to seee that with reclaim the benchmark still finishes in a reasonable amount of time. I also looked at the NUMA hit/miss stats for the "make -j" runs and the reclaim doesn't make any difference when the machine is thrashing away. Doing a "make -j8" on a single node that is filled with page cache pages takes 700 seconds with reclaim turned on and 735 seconds without reclaim (due to remote memory accesses). The simple zone_reclaim syscall program is at http://www.bork.org/~mort/sgi/zone_reclaim.c This patch: This adds an extra switch to the scan_control struct. It simply lets the reclaim code know if its allowed to swap pages out. This was required for a simple per-zone reclaimer. Without this addition pages would be swapped out as soon as a zone ran out of memory and the early reclaim kicked in. Signed-off-by: NMartin Hicks <mort@sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 akpm@osdl.org 提交于
Fix a problem identified by Andrea Arcangeli <andrea@suse.de> kswapd will set a zone into all_unreclaimable state if it sees that we're not successfully reclaiming LRU pages. But that fails to notice that we're successfully reclaiming slab obects, so we can set all_unreclaimable too soon. So change shrink_slab() to return a success indication if it actually reclaimed some objects, and don't assume that the zone is all_unreclaimable if that is true. This means that we won't enter all_unreclaimable state if we are successfully freeing slab objects but we're not yet actually freeing slab pages, due to internal fragmentation. (hm, this has a shortcoming. We could be successfully freeing ZONE_NORMAL slab objects while being really oom on ZONE_DMA. If that happens then kswapd might burn a lot of CPU. But given that there might be some slab objects in ZONE_DMA, perhaps that is appropriate.) Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 17 4月, 2005 2 次提交
-
-
由 akpm@osdl.org 提交于
) We only call pageout() for dirty pages, so this test is redundant. Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
-