- 10 1月, 2007 9 次提交
-
-
由 Linus Torvalds 提交于
* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband: IB/mthca: Don't execute QUERY_QP firmware command for QP in RESET state IB/ehca: Use proper GFP_ flags for get_zeroed_page() IB/mthca: Fix PRM compliance problem in atomic-send completions RDMA/ucma: Don't report events with invalid user context RDMA/ucma: Fix struct ucma_event leak when backlog is full RDMA/iwcm: iWARP connection timeouts shouldn't be reported as rejects IB/iser: Return error code when PDUs may not be sent IB/mthca: Fix off-by-one in FMR handling on memfree
-
由 Dotan Barak 提交于
If a QP being queried is in the RESET state, don't execute the QUERY_QP firmware command (because it will fail). Signed-off-by: NDotan Barak <dotanb@mellanox.co.il> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Hoang-Nam Nguyen 提交于
Here is a patch for ehca to use proper flag, ie. GFP_ATOMIC resp. GFP_KERNEL, when calling get_zeroed_page() to prevent "Bug: scheduling while atomic...". This error does not cause a kernel panic but makes ipoib un-usable afterwards. It is reproducible on 2.6.20-rc4 if one does ifconfig down during a flood ping test. I have not observed this error in earlier releases incl. 2.6.20-rc1. This error occurs when a qp event/irq is received and ehca event handler allocates a control block/page to obtain HCA error data block. Use of GFP_ATOMIC when in interrupt context prevents this issue. Signed-off-by Hoang-Nam Nguyen <hnguyen@de.ibm.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Linus Torvalds 提交于
* 'linus' of master.kernel.org:/pub/scm/linux/kernel/git/perex/alsa: [ALSA] version 1.0.14rc1 [ALSA] usbaudio - Fix kobject_add() error at reconnection [ALSA] usb: usbmixer error path fix [ALSA] _snd_cmipci_uswitch_put doesn't set zero flags [ALSA] hda-codec - Fix NULL dereference in generic hda code [ALSA] hda_intel: ALSA HD Audio patch for Intel ICH9 [ALSA] usb-audio: work around wrong frequency in CM6501 descriptors [ALSA] Fix potential NULL pointer dereference in echoaudio midi [ALSA] Audio: Add nvidia HD Audio controllers of MCP67 support to hda_intel.c
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [TCP]: Fix iov_len calculation in tcp_v4_send_ack(). [NETFILTER]: nf_conntrack_netbios_ns: fix uninitialized member in expectation [TG3]: Add PHY workaround for 5755M. [BNX2]: Update version and reldate. [BNX2]: Fix bug in bnx2_nvram_write(). [BNX2]: Fix 5709 Serdes detection. [BNX2]: Don't apply CRC PHY workaround to 5709. NetLabel: correct CIPSO tag handling when adding new DOI definitions NetLabel: correct locking in selinux_netlbl_socket_setsid() [Bluetooth] Correct SCO buffer for Broadcom based Dell laptops [Bluetooth] Correct SCO buffer for Broadcom based HP laptops [Bluetooth] Correct SCO buffer size for another ThinkPad laptop [Bluetooth] Handle device registration failures [Bluetooth] Fix uninitialized return value for RFCOMM sendmsg() [Bluetooth] More checks if DLC is still attached to the TTY [Bluetooth] Add packet size checks for CAPI messages [X25]: Trivial, SOCK_DEBUG's in x25_facilities missing newlines [INET]: Fix incorrect "inet_sock->is_icsk" assignment.
-
由 Linus Torvalds 提交于
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: pcnet_cs : add new id chelsio: error path fix s390: iucv Kconfig help description changes s390: qeth driver fixes: atomic context fixups s390: qeth driver fixes: packet socket s390: qeth driver fixes: VLAN hdr, perf stats forcedeth: sideband management fix Revert "[PATCH] e1000: disable TSO on the 82544 with slab debugging" qeth: fix uaccess handling and get rid of unused variable qla3xxx: Add delay to NVRAM register access. qla3xxx: Remove NETIF_F_LLTX from driver features. ixgb: Write RA register high word first, increment version ixgb: Maybe stop TX if not enough free descriptors ixgb: Fix early TSO completion [PATCH] ipw2100: Fix dropping fragmented small packet problem [PATCH] ieee80211: WLAN_GET_SEQ_SEQ fix (select correct region)
-
由 Linus Torvalds 提交于
* 'merge' of master.kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] Fix bugs in the hypervisor call stats code [POWERPC] Fix corruption in hcall9 [POWERPC] iSeries: fix setup initcall [POWERPC] iSeries: fix viopath initialisation [POWERPC] iSeries: fix lpevents initialisation [POWERPC] iSeries: fix proc/iSeries initialisation [POWERPC] iSeries: fix mf proc initialisation [POWERPC] disable PReP and EFIKA during make oldconfig [POWERPC] Fix mpc52xx serial driver to work for arch/ppc again [POWERPC] Don't include powerpc/sysdev/rom.o for arch/ppc builds [POWERPC] Fix mpc52xx fdt to use correct device_type for sound devices [POWERPC] 52xx: Don't use device_initcall to probe of_platform_bus [POWERPC] Add legacy iSeries to ppc64_defconfig [POWERPC] Update ppc64_defconfig [POWERPC] Fix manual assembly WARN_ON() in enter_rtas(). [POWERPC] Avoid calling get_irq_server() with a real, not virtual irq. [POWERPC] Fix unbalanced uses of of_node_put [POWERPC] Fix bogus BUG_ON() in in hugetlb_get_unmapped_area()
-
git://git390.osdl.marist.edu/pub/scm/linux-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: [S390] locking problem with __cpcmd. [S390] don't call handle_mm_fault() if in an atomic context. [S390] Fix vmalloc area size calculation. [S390] Fix cpu hotplug (missing 'online' attribute). [S390] cio: use barrier() in stsch_reset. [S390] memory detection misses 128k.
-
由 Mark M. Hoffman 提交于
The sis96x SMBus PCI device depends on two different quirks to run in a specific order. Apart from being fragile, this was found to actually break on (at least) recent FC4, FC5, and FC6 kernels. This patch fixes the quirks so that they work without relying on the compiler and/or linker to put them in any specific order. http://lists.lm-sensors.org/pipermail/lm-sensors/2006-April/015962.html https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=189719 I tested this patch. Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com> Cc: Andrew Morton <akpm@osdl.org> Cc: Adrian Bunk <bunk@stusta.de> Cc: Greg K-H <greg@kroah.com> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 09 1月, 2007 31 次提交
-
-
由 Jaroslav Kysela 提交于
Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Christian Borntraeger 提交于
Changeset 740b5706 moved the protecting spinlock from __cpcmd to cpcmd. Therefore vmcp can no longer use __cpcmd, instead we have to use cpcmd. Signed-off-by: NChristian Borntraeger <cborntra@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
There are several places in the futex code where a spin_lock is held and still uaccesses happen. Deadlocks are avoided by increasing the preempt count. The pagefault handler will then not take any locks but will immediately search the fixup tables. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
setup_memory_end() uses VMALLOC_END instead of VMALLOC_END_INIT to calculate the maximum supported size of physical memory. Since VMALLOC_END is zero, this will cause a crash on 31 bit systems. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
72486f1f inverts the logic if an 'online' attribute in /sys/devices/system/cpu/cpuX should appear. So we end up with no hotpluggable cpus at all... Set the hotpluggable value to one to make sure the online attribute appears again. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Use barrier() in stsch_reset() instead of duplicating the stsch() inline assembly and adding "memory" to the clobberlist. Pointed out by Chuck Ebbert. Real fix would be to add a fixup section to the stsch() and extend the basic program check handler so it searches the exception tables in case of a program check. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Hongjie Yang 提交于
Fix a memory leak problem in the memory detection routines. A memory leak of 128k occurs when we have a contiguous memory with mixed access-mode (read or write) ranges. Signed-off-by: NHongjie Yang <hongjie@us.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Craig Schlenter 提交于
This fixes the ftp stalls present in the current kernels. All credit goes to Komuro <komurojun-mbn@nifty.com> for tracking this down. The patch is untested but it looks *cough* obviously correct. Signed-off-by: NCraig Schlenter <craig@codefountain.com> Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
->helper is uninitialized in the expectation registered by the netbios_ns helper and it later copied to the expected connection, which causes invalid memory dereferences when trying to call the helper. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Some PHY trim values need to be fine-tuned on 5755M to be IEEE-compliant. Update version to 3.72. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Update version to 1.5.3. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
The bug was a bogus pointer being passed to kfree(). The pointer was incremented in the write loop and then passed to kfree(). The fix is to use align_buf to save the original address. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
5709 has a new register to detect copper/fiber PHYs. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
The workaround is only needed on 5706/5708 and cannot be applied on 5709. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paul Moore 提交于
The current netlbl_cipsov4_add_common() function has two problems which are fixed with this patch. The first is an off-by-one bug where it is possibile to overflow the doi_def->tags[] array. The second is a bug where the same doi_def->tags[] array was not always fully initialized, which caused sporadic failures. Signed-off-by: NPaul Moore <paul.moore@hp.com> Signed-off-by: NJames Morris <jmorris@namei.org>
-
由 Paul Moore 提交于
The spinlock protecting the update of the "sksec->nlbl_state" variable is not currently softirq safe which can lead to problems. This patch fixes this by changing the spin_{un}lock() functions into spin_{un}lock_bh() functions. Signed-off-by: NPaul Moore <paul.moore@hp.com> Signed-off-by: NJames Morris <jmorris@namei.org>
-
由 Marcel Holtmann 提交于
The SCO buffer size values on Dell laptops with a Bluetooth chip from Broadcom are wrong. The USB Bluetooth driver has to set a quirk to correct the SCO buffer size values. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Marcel Holtmann 提交于
The SCO buffer size values on HP laptops with a Bluetooth chip from Broadcom are wrong. The USB Bluetooth driver has to set a quirk to correct the SCO buffer size values. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Marcel Holtmann 提交于
The ThinkPad R60E uses a Broadcom based Bluetooth chip and even this version needs the quirk to correct the SCO buffer size values. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Marcel Holtmann 提交于
In the case the device registration for a new Bluetooth low-level connection fails there is no need to unregister it when the temporary data structure has been removed. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Marcel Holtmann 提交于
When calling send() with a zero length parameter on a RFCOMM socket it returns a positive value. In this rare case the variable err is used uninitialized and unfortunately its value is returned. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Marcel Holtmann 提交于
If the DLC device is no longer attached to the TTY device, then return errors or default values for various callbacks of the TTY layer. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Marcel Holtmann 提交于
With malformed packets it might be possible to overwrite internal CMTP and CAPI data structures. This patch adds additional length checks to prevent these kinds of remote attacks. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Andrew Hendry 提交于
Trivial. Newlines missing on the SOCK_DEBUG's for X.25 facility negotiation. Signed-off-by: NAndrew Hendry <andrew.hendry@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paul Moore 提交于
The inet_create() and inet6_create() functions incorrectly set the inet_sock->is_icsk field. Both functions assume that the is_icsk field is large enough to hold at least a INET_PROTOSW_ICSK value when it is actually only a single bit. This patch corrects the assignment by doing a boolean comparison whose result will safely fit into a single bit field. Signed-off-by: NPaul Moore <paul.moore@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Takashi Iwai 提交于
Fixed the error from kobject_add() at reconnection the usb audio device. This happens when an app keeps opening a device while the device is replugged, due to the confliction of the internal bookkept index and the really empty slot. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Mariusz Kozlowski 提交于
Without the patch below namelist[0] will not be freed in case of kmalloc error. Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Timofei V. Bondarenko 提交于
Playing with spdif output on cmipci i've noticed the SPDO5V option does not change appropriate bits the register. The _snd_cmipci_uswitch_put checks the change in flags in wrong way. If 'active' state of an option corresponds to a _zero_ bits in a hw register then function fails. The SPDO5V is the sample. In the most cases 'active' state of option is set through an non-zerio bits in a register. This case works fine. The fix attached. Unfortunately i was unable to change spdif output voltage anyway. Although the register changes right at least. From: Timofei V. Bondarenko <tim@ipi.ac.ru> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Fix NULL dereference in hda_generic.c. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Jason Gaston 提交于
This patch adds the Intel ICH9 HD Audio controller DID's for ALSA. Signed-off-by: NJason Gaston <jason.d.gaston@intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Clemens Ladisch 提交于
The C-Media CM6501 chip's descriptors say that altsetting 5 supports 48 kHz, but it actually plays at 96 kHz. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-