- 15 6月, 2015 1 次提交
-
-
由 Arend van Spriel 提交于
Making it more clear by freeing the ifp in same place where the vif object is freed. Reviewed-by: NHante Meuleman <meuleman@broadcom.com> Reviewed-by: NFranky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: NArend van Spriel <arend@broadcom.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
- 30 3月, 2015 1 次提交
-
-
由 Tom Gundersen 提交于
This will expose in /sys whether the ifname of a device is set by userspace or generated by the kernel. The latter kind (wlanX, etc) is not deterministic, so userspace needs to rename these devices to names that are guaranteed to stay the same between reboots. The former, however should never be renamed, so userspace needs to be able to reliably tell the difference. Similar functionality was introduced for the rtnetlink core in commit 5517750f ("net: rtnetlink - make create_link take name_assign_type") Signed-off-by: NTom Gundersen <teg@jklm.no> Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: Brett Rudley <brudley@broadcom.com> Cc: Arend van Spriel <arend@broadcom.com> Cc: Franky (Zhenhui) Lin <frankyl@broadcom.com> Cc: Hante Meuleman <meuleman@broadcom.com> Cc: Johannes Berg <johannes@sipsolutions.net> [reformat changelog to fit 72 cols] Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
- 04 3月, 2015 1 次提交
-
-
由 Joe Perches 提交于
Use the built-in function instead of memset. Miscellanea: Add #include <linux/etherdevice.h> where appropriate Use ETH_ALEN instead of 6 Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 31 10月, 2014 3 次提交
-
-
由 Hante Meuleman 提交于
Rename sdio_host.h to sdio.h and dhd_sdio.c to sdio.c. Reviewed-by: NArend Van Spriel <arend@broadcom.com> Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: NHante Meuleman <meuleman@broadcom.com> Signed-off-by: NArend van Spriel <arend@broadcom.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Hante Meuleman 提交于
Reviewed-by: NArend Van Spriel <arend@broadcom.com> Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: NHante Meuleman <meuleman@broadcom.com> Signed-off-by: NArend van Spriel <arend@broadcom.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Hante Meuleman 提交于
Reviewed-by: NArend Van Spriel <arend@broadcom.com> Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: NHante Meuleman <meuleman@broadcom.com> Signed-off-by: NArend van Spriel <arend@broadcom.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 01 10月, 2014 1 次提交
-
-
由 Arend van Spriel 提交于
In order to provision the P2P_DEVICE mac address using p2p_da_override iovar the discovery interface must be disabled. On some targets setting the mac address failed so disable the discovery interface to be certain. Reviewed-by: NHante Meuleman <meuleman@broadcom.com> Reviewed-by: NFranky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: NDaniel (Deognyoun) Kim <dekim@broadcom.com> Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: NArend van Spriel <arend@broadcom.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 26 8月, 2014 1 次提交
-
-
由 Vladimir Kondratiev 提交于
In the cfg80211_rx_mgmt(), parameter @gfp was used for the memory allocation. But, memory get allocated under spin_lock_bh(), this implies atomic context. So, one can't use GFP_KERNEL, only variants with no __GFP_WAIT. Actually, in all occurrences GFP_ATOMIC is used (wil6210 use GFP_KERNEL by mistake), and it should be this way or warning triggered in the memory allocation code. Remove @gfp parameter as no actual choice exist, and use hard coded GFP_ATOMIC for memory allocation. Signed-off-by: NVladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
- 21 7月, 2014 1 次提交
-
-
由 Fabian Frederick 提交于
Signed-off-by: NFabian Frederick <fabf@skynet.be> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 6月, 2014 1 次提交
-
-
由 Rasmus Villemoes 提交于
Applying ++ to a bool is equivalent to setting it true, regardless of its initial value (bools are not uint1_t). Hence the function wl_get_vif_state_all can only ever return true/false. The only in-tree caller uses its return value as a boolean. So update its return type, and since the list traversal and bit testing have no side effects, just return true immediately. Its return value tells if any vif is in the specified state, so also rename it to brcmf_get_vif_state_any. Reviewed-by: Arend van Spriel<arend@broadcom.com> Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 18 3月, 2014 1 次提交
-
-
由 Arend van Spriel 提交于
The nl80211 iftype was converted to a mode value and stored in brcmf_cfg80211_vif structure. The value was used only within brcmfmac driver to decide execution of conditional code. Better use wireless_dev::iftype for that as the wdev is contained in the brcmf_cfg80211_vif structure. Reviewed-by: NDaniel (Deognyoun) Kim <dekim@broadcom.com> Reviewed-by: NHante Meuleman <meuleman@broadcom.com> Reviewed-by: NFranky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: NArend van Spriel <arend@broadcom.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 07 1月, 2014 2 次提交
-
-
由 Arend van Spriel 提交于
The destructor for net devices was set to free_netdev() to get rid of it and the private data. The private data refers to a brcmf_if instance, but indirectly it also refers to brcmf_cfg80211_vif which holds the wdev. This is freed as well by using a new custom destructor called brcmf_cfg80211_free_netdev(). Reviewed-by: NHante Meuleman <meuleman@broadcom.com> Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: NArend van Spriel <arend@broadcom.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Arend van Spriel 提交于
The wiphy_unregister() call was done in brcmf_free_vif() when the last interface was being removed. This is not the obvious place to do that. This patch moves it to the brcmf_cfg80211_detach(). This removes the need to keep count of interfaces. Reviewed-by: NHante Meuleman <meuleman@broadcom.com> Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: NArend van Spriel <arend@broadcom.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 27 12月, 2013 1 次提交
-
-
由 dingtianhong 提交于
Use possibly more efficient ether_addr_equal or ether_addr_equal_unaligned instead of memcmp. Cc: John W. Linville <linville@tuxdriver.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: NWeilong Chen <chenweilong@huawei.com> Signed-off-by: NDing Tianhong <dingtianhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 11月, 2013 1 次提交
-
-
由 Luis R. Rodriguez 提交于
These two flags are used for the same purpose, just combine them into a no-ir flag to annotate no initiating radiation is allowed. Old userspace sending either flag will have it treated as the no-ir flag. To be considerate to older userspace we also send both the no-ir flag and the old no-ibss flags. Newer userspace will have to be aware of older kernels. Update all places in the tree using these flags with the following semantic patch: @@ @@ -NL80211_RRF_PASSIVE_SCAN +NL80211_RRF_NO_IR @@ @@ -NL80211_RRF_NO_IBSS +NL80211_RRF_NO_IR @@ @@ -IEEE80211_CHAN_PASSIVE_SCAN +IEEE80211_CHAN_NO_IR @@ @@ -IEEE80211_CHAN_NO_IBSS +IEEE80211_CHAN_NO_IR @@ @@ -NL80211_RRF_NO_IR | NL80211_RRF_NO_IR +NL80211_RRF_NO_IR @@ @@ -IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_IR +IEEE80211_CHAN_NO_IR @@ @@ -(NL80211_RRF_NO_IR) +NL80211_RRF_NO_IR @@ @@ -(IEEE80211_CHAN_NO_IR) +IEEE80211_CHAN_NO_IR Along with some hand-optimisations in documentation, to remove duplicates and to fix some indentation. Signed-off-by: NLuis R. Rodriguez <mcgrof@do-not-panic.com> [do all the driver updates in one go] Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
- 19 11月, 2013 1 次提交
-
-
由 Geyslan G. Bem 提交于
Free temporary 'chanspecs' avoiding leakage. Signed-off-by: NGeyslan G. Bem <geyslan@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 15 11月, 2013 1 次提交
-
-
由 Wolfram Sang 提交于
Use this new function to make code more comprehensible, since we are reinitialzing the completion, not initializing. [akpm@linux-foundation.org: linux-next resyncs] Signed-off-by: NWolfram Sang <wsa@the-dreams.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13) Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 23 8月, 2013 1 次提交
-
-
由 Vladimir Kondratiev 提交于
Add flags intended to report various auxiliary information and introduce the NL80211_RXMGMT_FLAG_ANSWERED flag to report that the frame was already answered by the device. Signed-off-by: NVladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> [REPLIED->ANSWERED, reword commit message] Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
- 29 5月, 2013 3 次提交
-
-
由 Arend van Spriel 提交于
Upon deleting a P2P_CLIENT/GO interface the vif and consequently the wdev is freed before the net_device is actually being unregistered but cfg80211 still needs to access the wdev. Using destructor field to free the net_device and vif. Reviewed-by: NHante Meuleman <meuleman@broadcom.com> Signed-off-by: NArend van Spriel <arend@broadcom.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Arend van Spriel 提交于
Pass the struct brcmf_cfg80211_info instance instead of obtaining through vif itself using vif->wdev. This is needed as the netdev associated with this vif is already unregistered. Reviewed-by: NHante Meuleman <meuleman@broadcom.com> Signed-off-by: NArend van Spriel <arend@broadcom.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Hante Meuleman 提交于
The firmware requires that on p2p setup when net interfaces are created or updated that they start initially with the same channel as the channel in use for the current connection (if any). If none exists take default channel 11. Reviewed-by: NArend Van Spriel <arend@broadcom.com> Reviewed-by: NFranky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: NHante Meuleman <meuleman@broadcom.com> Signed-off-by: NArend van Spriel <arend@broadcom.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 08 5月, 2013 1 次提交
-
-
由 Akinobu Mita 提交于
Use preferable function name which implies using a pseudo-random number generator. [akpm@linux-foundation.org: convert team_mode_random.c] Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Acked-by: NThomas Sailer <t.sailer@alumni.ethz.ch> Acked-by: Bing Zhao <bzhao@marvell.com> [mwifiex] Cc: "David S. Miller" <davem@davemloft.net> Cc: Michael Chan <mchan@broadcom.com> Cc: Thomas Sailer <t.sailer@alumni.ethz.ch> Cc: Jean-Paul Roubelat <jpr@f6fbb.org> Cc: Bing Zhao <bzhao@marvell.com> Cc: Brett Rudley <brudley@broadcom.com> Cc: Arend van Spriel <arend@broadcom.com> Cc: "Franky (Zhenhui) Lin" <frankyl@broadcom.com> Cc: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 13 4月, 2013 1 次提交
-
-
由 Franky Lin 提交于
Adopting the new d11 interface for 11ac fullmac chip support. Reviewed-by: NHante Meuleman <meuleman@broadcom.com> Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: NArend van Spriel <arend@broadcom.com> Reviewed-by: NPiotr Haber <phaber@broadcom.com> Signed-off-by: NFranky Lin <frankyl@broadcom.com> Signed-off-by: NArend van Spriel <arend@broadcom.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 09 4月, 2013 6 次提交
-
-
由 Arend van Spriel 提交于
The function brcmf_p2p_notify_action_frame_rx() the wireless_dev is needed to pass the action frame to cfg80211. The wireless_dev is held in brcmf_cfg80211_vif object. Use that instead of the ieee80211_ptr in net_device as P2P_DEVICE interface does not have a net_device associated with it. Reviewed-by: NHante Meuleman <meuleman@broadcom.com> Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: NArend van Spriel <arend@broadcom.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Arend van Spriel 提交于
The probe requests received on P2P_DEVICE interface were not sent to wpa_supplicant, which makes the device not discoverable by peers. Reviewed-by: NHante Meuleman <meuleman@broadcom.com> Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: NArend van Spriel <arend@broadcom.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Arend van Spriel 提交于
The firmware sends a IF event to notify the host driver that the P2P_DEVICE interface has been created. Wait for the event before returning the related wireless_dev. Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: NPiotr Haber <phaber@broadcom.com> Reviewed-by: NHante Meuleman <meuleman@broadcom.com> Signed-off-by: NArend van Spriel <arend@broadcom.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Arend van Spriel 提交于
The current driver code creates a P2P_DEVICE through a module parameter. This device has a dummy netdevice which is not how this interface type is intended. This patch add proper support for the P2P_DEVICE interface type. This requires a wpa_supplicant with such support as well. Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: NPiotr Haber <phaber@broadcom.com> Reviewed-by: NHante Meuleman <meuleman@broadcom.com> Signed-off-by: NArend van Spriel <arend@broadcom.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Arend van Spriel 提交于
escan functionality is also required for P2P device operations so it is better not to rely on struct netdevice instances. Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: NPiotr Haber <phaber@broadcom.com> Reviewed-by: NHante Meuleman <meuleman@broadcom.com> Signed-off-by: NArend van Spriel <arend@broadcom.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Arend van Spriel 提交于
Remove use of struct netdevice as parameter to brcmf_set_mpc() as it will not always be available, ie. there will be non-netdevice interfaces. Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: NPiotr Haber <phaber@broadcom.com> Reviewed-by: NHante Meuleman <meuleman@broadcom.com> Signed-off-by: NArend van Spriel <arend@broadcom.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 09 2月, 2013 11 次提交
-
-
由 Hante Meuleman 提交于
With this patch off-channel action frames can be transmitted. This is needed for p2p when two devices need to find each other while using different social channels. Reviewed-by: NArend Van Spriel <arend@broadcom.com> Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: NPiotr Haber <phaber@broadcom.com> Signed-off-by: NHante Meuleman <meuleman@broadcom.com> Signed-off-by: NArend van Spriel <arend@broadcom.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Hante Meuleman 提交于
Currently netdev gets created possibly after returning from add_virtual_intf. This is because add_if is handled asynch. This is wrong and netdev should be up before returning. Reviewed-by: NArend Van Spriel <arend@broadcom.com> Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: NPiotr Haber <phaber@broadcom.com> Signed-off-by: NHante Meuleman <meuleman@broadcom.com> Signed-off-by: NArend van Spriel <arend@broadcom.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Hante Meuleman 提交于
Wiphy object holds information about possible netdev combinations which can be supported. This needs updating for p2p device. Also p2p device netdev has wrong 80211 iftype. Limit the change interface support to match the netdev configuration/combination possibilities. Reviewed-by: NArend Van Spriel <arend@broadcom.com> Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: NPiotr Haber <phaber@broadcom.com> Signed-off-by: NHante Meuleman <meuleman@broadcom.com> Signed-off-by: NArend van Spriel <arend@broadcom.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Hante Meuleman 提交于
Reviewed-by: NArend Van Spriel <arend@broadcom.com> Signed-off-by: NHante Meuleman <meuleman@broadcom.com> Signed-off-by: NArend van Spriel <arend@broadcom.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Hante Meuleman 提交于
Add module variable with which a p2p0 netdev can be created. This netdev can be used by wpa-supplicant to configure and set up the p2p client/GO. Reviewed-by: NArend Van Spriel <arend@broadcom.com> Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: NHante Meuleman <meuleman@broadcom.com> Signed-off-by: NArend van Spriel <arend@broadcom.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Arend van Spriel 提交于
cfg80211 api change needs to be applied. this change will be squashed with introducing commit: commit 68751daec95b07a74b18aa22b2f9c196991dbe81 Author: Hante Meuleman <meuleman@broadcom.com> Date: Mon Nov 26 12:21:27 2012 +0100 brcmfmac: add support for P2P listen mode. Signed-off-by: NArend van Spriel <arend@broadcom.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Hante Meuleman 提交于
In some rare situations the wpa_supplicant can lock up on a remain on channel command. Use actual cookies for the remain on channel related commands and allow for additional remain on channel while still having one set. Reviewed-by: NArend Van Spriel <arend@broadcom.com> Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: NHante Meuleman <meuleman@broadcom.com> Signed-off-by: NArend van Spriel <arend@broadcom.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Hante Meuleman 提交于
With this patch it is possible to send action frames. Reviewed-by: NArend Van Spriel <arend@broadcom.com> Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: NHante Meuleman <meuleman@broadcom.com> Signed-off-by: NArend van Spriel <arend@broadcom.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Hante Meuleman 提交于
Once wpa_supplicant has registered for P2P action frames all received action frames for the device are passed up to cfg80211. Reviewed-by: NArend Van Spriel <arend@broadcom.com> Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: NHante Meuleman <meuleman@broadcom.com> Signed-off-by: NArend van Spriel <arend@broadcom.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Hante Meuleman 提交于
With this update it is possible to create an P2P go. Handle the p2p go role in creation and the update beacon from cfg80211. Also store primary bss in global struct. Needed to map cfg device back to primary device. Reviewed-by: NArend Van Spriel <arend@broadcom.com> Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: NHante Meuleman <meuleman@broadcom.com> Signed-off-by: NArend van Spriel <arend@broadcom.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Hante Meuleman 提交于
Add support for changing existing interface into p2p go interface. Reviewed-by: NArend Van Spriel <arend@broadcom.com> Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: NHante Meuleman <meuleman@broadcom.com> Signed-off-by: NArend van Spriel <arend@broadcom.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-