- 20 7月, 2007 4 次提交
-
-
由 Mark Fasheh 提交于
There seems to be very little documentation about this callback in general. The locking in particular is a bit tricky, so it's worth having this in writing. Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: David Howells <dhowells@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mark Fasheh 提交于
__do_fault() was calling ->page_mkwrite() with the page lock held, which violates the locking rules for that callback. Release and retake the page lock around the callback to avoid deadlocking file systems which manually take it. Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Nick Piggin 提交于
Nonlinear mappings are (AFAIKS) simply a virtual memory concept that encodes the virtual address -> file offset differently from linear mappings. ->populate is a layering violation because the filesystem/pagecache code should need to know anything about the virtual memory mapping. The hitch here is that the ->nopage handler didn't pass down enough information (ie. pgoff). But it is more logical to pass pgoff rather than have the ->nopage function calculate it itself anyway (because that's a similar layering violation). Having the populate handler install the pte itself is likewise a nasty thing to be doing. This patch introduces a new fault handler that replaces ->nopage and ->populate and (later) ->nopfn. Most of the old mechanism is still in place so there is a lot of duplication and nice cleanups that can be removed if everyone switches over. The rationale for doing this in the first place is that nonlinear mappings are subject to the pagefault vs invalidate/truncate race too, and it seemed stupid to duplicate the synchronisation logic rather than just consolidate the two. After this patch, MAP_NONBLOCK no longer sets up ptes for pages present in pagecache. Seems like a fringe functionality anyway. NOPAGE_REFAULT is removed. This should be implemented with ->fault, and no users have hit mainline yet. [akpm@linux-foundation.org: cleanup] [randy.dunlap@oracle.com: doc. fixes for readahead] [akpm@linux-foundation.org: build fix] Signed-off-by: NNick Piggin <npiggin@suse.de> Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Cc: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Nick Piggin 提交于
Fix the race between invalidate_inode_pages and do_no_page. Andrea Arcangeli identified a subtle race between invalidation of pages from pagecache with userspace mappings, and do_no_page. The issue is that invalidation has to shoot down all mappings to the page, before it can be discarded from the pagecache. Between shooting down ptes to a particular page, and actually dropping the struct page from the pagecache, do_no_page from any process might fault on that page and establish a new mapping to the page just before it gets discarded from the pagecache. The most common case where such invalidation is used is in file truncation. This case was catered for by doing a sort of open-coded seqlock between the file's i_size, and its truncate_count. Truncation will decrease i_size, then increment truncate_count before unmapping userspace pages; do_no_page will read truncate_count, then find the page if it is within i_size, and then check truncate_count under the page table lock and back out and retry if it had subsequently been changed (ptl will serialise against unmapping, and ensure a potentially updated truncate_count is actually visible). Complexity and documentation issues aside, the locking protocol fails in the case where we would like to invalidate pagecache inside i_size. do_no_page can come in anytime and filemap_nopage is not aware of the invalidation in progress (as it is when it is outside i_size). The end result is that dangling (->mapping == NULL) pages that appear to be from a particular file may be mapped into userspace with nonsense data. Valid mappings to the same place will see a different page. Andrea implemented two working fixes, one using a real seqlock, another using a page->flags bit. He also proposed using the page lock in do_no_page, but that was initially considered too heavyweight. However, it is not a global or per-file lock, and the page cacheline is modified in do_no_page to increment _count and _mapcount anyway, so a further modification should not be a large performance hit. Scalability is not an issue. This patch implements this latter approach. ->nopage implementations return with the page locked if it is possible for their underlying file to be invalidated (in that case, they must set a special vm_flags bit to indicate so). do_no_page only unlocks the page after setting up the mapping completely. invalidation is excluded because it holds the page lock during invalidation of each page (and ensures that the page is not mapped while holding the lock). This also allows significant simplifications in do_no_page, because we have the page locked in the right place in the pagecache from the start. Signed-off-by: NNick Piggin <npiggin@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 19 7月, 2007 36 次提交
-
-
由 Linus Torvalds 提交于
* 'isdn-fix' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/misc-2.6: ISDN HiSax: uninitialized return in hisax_cs_setup
-
由 Linus Torvalds 提交于
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: eHEA: Fix bonding support Blackfin ethernet driver: on chip ethernet MAC controller driver fix wrong argument of tc35815_read_plat_dev_addr() ARM/ETHER3: Handle multicast frames. SAA9730: Handle multicast frames. NI5010: Handle multicast frames. NS83820: Handle multicast frames. Fix RGMII-ID handling in gianfar Fix Vitesse RGMII-ID support Add phy-connection-type to gianfar nodes Fix Vitesse 824x PHY interrupt acking [PATCH] zd1211rw: Add ID for Siemens Gigaset USB Stick 54 [PATCH] zd1211rw: Add ID for Planex GW-US54GXS [PATCH] Update version ipw2200 stamp to 1.2.2 [PATCH] ipw2200: Fix ipw_isr() comments error on shared IRQ [PATCH] Fix ipw2200 set wrong power parameter causing firmware error [PATCH] ipw2100: Fix `iwpriv set_power` error [PATCH] softmac: Channel is listed twice in scan output
-
git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: (24 commits) [CIFS] merge conflict in fs/cifs/export.c [CIFS] Allow disabling CIFS Unix Extensions as mount option [CIFS] More whitespace/formatting fixes (noticed by checkpatch) [CIFS] Typo in previous patch [CIFS] zero_user_page() conversions [CIFS] use simple_prepare_write to zero page data [CIFS] Fix build break - inet.h not included when experimental ifdef off [CIFS] Add support for new POSIX unlink [CIFS] whitespace/formatting fixes [CIFS] Fix oops in cifs_create when nfsd server exports cifs mount [CIFS] whitespace cleanup [CIFS] Fix packet signatures for NTLMv2 case [CIFS] more whitespace fixes [CIFS] more whitespace cleanup [CIFS] whitespace cleanup [CIFS] whitespace cleanup [CIFS] ipv6 support no longer experimental [CIFS] Mount should fail if server signing off but client mount option requires it [CIFS] whitespace fixes [CIFS] Fix sign mount option and sign proc config setting ...
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/docs-2.6: zh_CN/HOWTO: update URLs of git trees Chinese translation of Documentation/stable_api_nonsense.txt HOWTO: add Chinese translation of Documentation/HOWTO Documentation: add Japanese translated stable_api_nonsense.txt HOWTO: add Japanese translation of Documentation/HOWTO
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6: sysfs: cosmetic clean up on node creation failure paths sysfs: kill an extra put in sysfs_create_link() failure path Driver core: check return code of sysfs_create_link() HOWTO: Add the knwon_regression URI to the documentation dev_vdbg() documentation dev_vdbg(), available with -DVERBOSE_DEBUG sysfs: make sysfs_init_inode() static sysfs: fix sysfs root inode nlink accounting Documentation fix devres.txt: lib/iomap.c -> lib/devres.c sysfs: avoid kmem_cache_free(NULL) PM: remove deprecated dpm_runtime_* routines PM: Remove deprecated sysfs files Driver core: accept all valid action-strings in uevent-trigger debugfs: remove rmdir() non-empty complaint
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/uio-2.6: UIO: Hilscher CIF card driver UIO: Documentation UIO: Add the User IO core code
-
git://linux-nfs.org/~bfields/linux由 Linus Torvalds 提交于
* 'for-linus' of git://linux-nfs.org/~bfields/linux: locks: fix vfs_test_lock() comment locks: make posix_test_lock() interface more consistent nfs: disable leases over NFS gfs2: stop giving out non-cluster-coherent leases locks: export setlease to filesystems locks: provide a file lease method enabling cluster-coherent leases locks: rename lease functions to reflect locks.c conventions locks: share more common lease code locks: clean up lease_alloc() locks: convert an -EINVAL return to a BUG leases: minor break_lease() comment clarification
-
由 Linus Torvalds 提交于
* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband: (29 commits) IB/mthca: Simplify use of size0 in work request posting IB/mthca: Factor out setting WQE UD segment entries IB/mthca: Factor out setting WQE remote address and atomic segment entries IB/mlx4: Factor out setting other WQE segments IB/mlx4: Factor out setting WQE data segment entries IB/mthca: Factor out setting WQE data segment entries IB/mlx4: Return receive queue sizes for userspace QPs from query QP IB/mlx4: Increase max outstanding RDMA reads as target RDMA/cma: Remove local write permission from QP access flags IB/mthca: Use uninitialized_var() for f0 IB/cm: Make internal function cm_get_ack_delay() static IB/ipath: Remove ipath_get_user_pages_nocopy() IB/ipath: Make a few functions static mlx4_core: Reset device when internal error is detected IB/iser: Make a couple of functions static IB/mthca: Fix printk format used for firmware version in warning IB/mthca: Schedule MSI support for removal IB/ehca: Fix warnings issued by checkpatch.pl IB/ehca: Restructure ehca_set_pagebuf() IB/ehca: MR/MW structure refactoring ...
-
由 Steve French 提交于
Conflicts: fs/cifs/export.c
-
由 Steve French 提交于
Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Steve French 提交于
Previously the only way to do this was to umount all mounts to that server, turn off a proc setting (/proc/fs/cifs/LinuxExtensionsEnabled). Fixes Samba bugzilla bug number: 4582 (and also 2008) Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 J. Bruce Fields 提交于
Thanks to Doug Chapman for pointing out that the comment here is inconsistent with the function prototype. Signed-off-by: N"J. Bruce Fields" <bfields@citi.umich.edu>
-
由 J. Bruce Fields 提交于
Since posix_test_lock(), like fcntl() and ->lock(), indicates absence or presence of a conflict lock by setting fl_type to, respectively, F_UNLCK or something other than F_UNLCK, the return value is no longer needed. Signed-off-by: N"J. Bruce Fields" <bfields@citi.umich.edu>
-
由 J. Bruce Fields 提交于
As Peter Staubach says elsewhere (http://marc.info/?l=linux-kernel&m=118113649526444&w=2): > The problem is that some file system such as NFSv2 and NFSv3 do > not have sufficient support to be able to support leases correctly. > In particular for these two file systems, there is no over the wire > protocol support. > > Currently, these two file systems fail the fcntl(F_SETLEASE) call > accidentally, due to a reference counting difference. These file > systems should fail more consciously, with a proper error to > indicate that the call is invalid for them. Define an nfs setlease method that just returns -EINVAL. If someone can demonstrate a real need, perhaps we could reenable them in the presence of the "nolock" mount option. Signed-off-by: N"J. Bruce Fields" <bfields@citi.umich.edu> Cc: Peter Staubach <staubach@redhat.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
-
由 Marc Eshel 提交于
Since gfs2 can't prevent conflicting opens or leases on other nodes, we probably shouldn't allow it to give out leases at all. Put the newly defined lease operation into use in gfs2 by turning off lease, unless we're using the "nolock' locking module (in which case all locking is local anyway). Signed-off-by: NMarc Eshel <eshel@almaden.ibm.com> Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu> Cc: Steven Whitehouse <swhiteho@redhat.com>
-
由 J. Bruce Fields 提交于
Export setlease so it can used by filesystems to implement their lease methods. Signed-off-by: N"J. Bruce Fields" <bfields@citi.umich.edu>
-
由 J. Bruce Fields 提交于
Currently leases are only kept locally, so there's no way for a distributed filesystem to enforce them against multiple clients. We're particularly interested in the case of nfsd exporting a cluster filesystem, in which case nfsd needs cluster-coherent leases in order to implement delegations correctly. Also add some documentation. Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
-
由 J. Bruce Fields 提交于
We've been using the convention that vfs_foo is the function that calls a filesystem-specific foo method if it exists, or falls back on a generic method if it doesn't; thus vfs_foo is what is called when some other part of the kernel (normally lockd or nfsd) wants to get a lock, whereas foo is what filesystems call to use the underlying local functionality as part of their lock implementation. So rename setlease to vfs_setlease (which will call a filesystem-specific setlease after a later patch) and __setlease to setlease. Also, vfs_setlease need only be GPL-exported as long as it's only needed by lockd and nfsd. Signed-off-by: N"J. Bruce Fields" <bfields@citi.umich.edu>
-
由 J. Bruce Fields 提交于
Share more code between setlease (used by nfsd) and fcntl. Also some minor cleanup. Signed-off-by: N"J. Bruce Fields" <bfields@citi.umich.edu> Acked-by: NChristoph Hellwig <hch@infradead.org>
-
由 J. Bruce Fields 提交于
Return the newly allocated structure as the return value instead of using a struct ** parameter. Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
-
由 J. Bruce Fields 提交于
There's no point trying to return an error in these cases, which all represent bugs in the callers. Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
-
由 david m. richter 提交于
clarify that break_lease() checks for presence of any lock, not just leases. Signed-off-by: NDavid M. Richter <richterd@citi.umich.edu> Signed-off-by: N"J. Bruce Fields" <bfields@citi.umich.edu>
-
由 Li Yang 提交于
Addressing patch from Stefan Richter: HOWTO: update URLs of git trees (It will be better if we update this to commit-id later) Signed-off-by: NLi Yang <leoli@freescale.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 TripleX 提交于
This is a Chinese translated version of Documentation/stable_api_nonsense.txt. From: TripleX <zhongyu@18mail.cn> Signed-off-by: NWANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: NLi Yang <leoli@freescale.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Li Yang 提交于
This is a Chinese translated version of Documentation/HOWTO. Currently Chinese involvement in Linux kernel is very low, especially comparing to its largest population base. Language could be the main obstacle. Hope this document will help more Chinese to contribute to Linux kernel. Signed-off-by: NLi Yang <leoli@freescale.com> Signed-off-by: NTripleX Chung <xxx.phy@gmail.com> Signed-off-by: NMaggie Chen <chenqi@beyondsoft.com> Signed-off-by: NWANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 IKEDA, Munehiro 提交于
Signed-off-by: NIKEDA, Munehiro <m-ikeda@ds.jp.nec.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Tsugikazu Shibata 提交于
Add the japanese translation of the Documentation/HOWTO file. Signed-off-by: NTsugikazu Shibata <tshibata@ab.jp.nec.com> Cc: IKEDA Munehiro <m-ikeda@ds.jp.nec.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Hans-Jürgen Koch 提交于
this is a patch that adds support for Hilscher CIF DeviceNet and Profibus cards. I tested it on a Kontron CPX board, and Thomas reviewed it. You can find the user space part here: http://www.osadl.org/projects/downloads/UIO/user/cif-0.1.0.tar.gz Notes: cif_api.c is the main file you want to look at. It contains the functions to open, close, mmap and so on. cif_dps.c adds functions specific to Profibus cards, and cif_dn.c contains functions for DeviceNet cards. cif.c is a universal playground, it's just a small test program. The user space part of this UIO driver is still work in progress, and not everything is tested yet. At the moment, the thread in cif_api.c contains some code that artificially makes the card generate interrupts, this was added for testing and will be removed later. But the driver already contains all the functions needed for useful operation, so it gives a good idea of how such a thing looks like. For comparison, here's what you get from the manufacturer (www.hilscher.com) when you ask for a Linux 2.6 driver: http://www.tglx.de/private/hjk/cif-orig-2.6.tar.bz2 WARNING: Don't look at the code for too long, you might become sick :-) Signed-off-by: NHans-Jürgen Koch <hjk@linutronix.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Hans J. Koch 提交于
Documentation for the UIO interface From: Hans J. Koch <hjk@linutronix.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Hans J. Koch 提交于
This interface allows the ability to write the majority of a driver in userspace with only a very small shell of a driver in the kernel itself. It uses a char device and sysfs to interact with a userspace process to process interrupts and control memory accesses. See the docbook documentation for more details on how to use this interface. From: Hans J. Koch <hjk@linutronix.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Benedikt Spranger <b.spranger@linutronix.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Tejun Heo 提交于
Node addition failure is detected by testing return value of sysfs_addfm_finish() which returns the number of added and removed nodes. As the function is called as the last step of addition right on top of error handling block, the if blocks looked like the following. if (sysfs_addrm_finish(&acxt)) success handling, usually return; /* fall through to error handling */ This is the opposite of usual convention in sysfs and makes the code difficult to understand. This patch inverts the test and makes those blocks look more like others. Signed-off-by: NTejun Heo <htejun@gmail.com> Cc: Gabriel C <nix.or.die@googlemail.com> Cc: Miles Lane <miles.lane@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Tejun Heo 提交于
There is a subtle bug in sysfs_create_link() failure path. When symlink creation fails because there's already a node with the same name, the target sysfs_dirent is put twice - once by failure path of sysfs_create_link() and once more when the symlink is released. Fix it by making only the symlink node responsible for putting target_sd. Signed-off-by: NTejun Heo <htejun@gmail.com> Cc: Gabriel C <nix.or.die@googlemail.com> Cc: Miles Lane <miles.lane@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Cornelia Huck 提交于
Check for return value of sysfs_create_link() in device_add() and device_rename(). Add helper functions device_add_class_symlinks() and device_remove_class_symlinks() to make the code easier to read. [akpm@linux-foundation.org: fix unused var warnings] Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Acked-by: NJeff Garzik <jeff@garzik.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Paolo Ciarrocchi 提交于
We should let everybody know about where the regression list is hosted. The more is known the more it is used. Signed-off-by: NPaolo Ciarrocchi <paolo.ciarrocchi@gmail.com> Cc: Li Yang <leoli@freescale.com> Cc: TripleX Chung <xxx.phy@gmail.com> Cc: Maggie Chen <chenqi@beyondsoft.com> Cc: WANG Cong <xiyou.wangcong@gmail.com> Cc: Tsugikazu Shibata <tshibata@ab.jp.nec.com> Cc: IKEDA Munehiro <m-ikeda@ds.jp.nec.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David Brownell 提交于
Update CodingStyle to talk about "-DDEBUG" message conventions and the new "-DVERBOSE_DEBUG" convention. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David Brownell 提交于
This defines a dev_vdbg() call, which is enabled with -DVERBOSE_DEBUG. When enabled, dev_vdbg() acts just like dev_dbg(). When disabled, it is a NOP ... just like dev_dbg() without -DDEBUG. The specific code was moved out of a USB patch, but lots of drivers have similar support. That is, code can now be written to use an additional level of debug output, selected at compile time. Many driver authors have found this idiom to be very useful. A typical usage model is for "normal" debug messages to focus on fault paths and not be very "chatty", so that those messages can be left on during normal operation without much of a performance or syslog load. On the other hand "verbose" messages would be noisy enough that they wouldn't normally be enabled; they might even affect timings enough to change system or driver behavior. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-